Power gpio configuration is done from the middle of
dwc3_octeon_clocks_start leaving hardware in half-initialized
state if it fails. As that indicates dwc3_octeon_clocks_start
does more than just initialize the clocks rename it appropriately
and verify power gpio configuration in advance at the beginning
of device probe.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/ZMd/oMRx8ze22/kK@lenoch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DWC3 as implemented in Cavium SoC is using UCTL bridge unit
between I/O interconnect and USB controller.
Currently there is no bond with dwc3 core code, so if anything goes
wrong in UCTL setup dwc3 is left in reset, which leads to bus error
while trying to read any device register. Thus any failure in UCTL
initialization ends with kernel panic.
To avoid this move Octeon DWC3 glue code from arch/mips and make it
proper glue driver which is used instead of dwc3-of-simple.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/ZMd/ReyiY7wS6DvN@lenoch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In current design of the PPS APDO selection, TCPM power supply only
accepts the requested voltage which is inside the range of the selected
PPS profile. To extend the flexibility and usability, remove the checks
about the voltage range in current profile. And try to search all PPS
APDOs of the Source that fit the requested voltage.
Also remove some redundant checks in tcpm_pd_build_pps_request.
Signed-off-by: Kyle Tso <kyletso@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230731162159.19483-1-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a warning reported by coccinelle:
./drivers/usb/gadget/udc/renesas_usbf.c:3381:3-8:
No need to set .owner here. The core will do it.
The module_platform_driver() will set "THIS_MODULE" to driver.owner
when register a driver for platform-level devices, so it is redundant
initialization to set driver.owner in udc_driver statement. Remove it
to silence the warning.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20230803032838.3045730-1-lizetao1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When platform_get_irq_byname() fails, it may return -EPROBE_DEFER,
which suggested deferred probing, it is very important to propagate it
upstream. We cannot override it with other error code.
Commit ce753ad154 ("platform: finally disallow IRQ0 in
platform_get_irq() and its ilk") makes sure IRQ0 is not returned.
Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Link: https://lore.kernel.org/r/20230804105430.95773-1-wangzhu9@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need the USB fixes in here for testing and for other patches to be
applied on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull spi fixes from Mark Brown:
"A bunch of fixes for the Qualcomm QSPI driver, fixing multiple issues
with the newly added DMA mode - it had a number of issues exposed when
tested in a wider range of use cases, both race condition style issues
and issues with different inputs to those that had been used in test"
* tag 'spi-fix-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-qcom-qspi: Add mem_ops to avoid PIO for badly sized reads
spi: spi-qcom-qspi: Fallback to PIO for xfers that aren't multiples of 4 bytes
spi: spi-qcom-qspi: Add DMA_CHAIN_DONE to ALL_IRQS
spi: spi-qcom-qspi: Call dma_wmb() after setting up descriptors
spi: spi-qcom-qspi: Use GFP_ATOMIC flag while allocating for descriptor
spi: spi-qcom-qspi: Ignore disabled interrupts' status in isr
Pull regulator fixes from Mark Brown:
"A couple of small fixes for the the mt6358 driver, fixing error
reporting and a bootstrapping issue"
* tag 'regulator-fix-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: mt6358: Fix incorrect VCN33 sync error message
regulator: mt6358: Sync VCN33_* enable status after checking ID
Pull USB fixes from Greg KH:
"Here are a set of USB driver fixes for 6.5-rc4. Include in here are:
- new USB serial device ids
- dwc3 driver fixes for reported issues
- typec driver fixes for reported problems
- gadget driver fixes
- reverts of some problematic USB changes that went into -rc1
All of these have been in linux-next with no reported problems"
* tag 'usb-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits)
usb: misc: ehset: fix wrong if condition
usb: dwc3: pci: skip BYT GPIO lookup table for hardwired phy
usb: cdns3: fix incorrect calculation of ep_buf_size when more than one config
usb: gadget: call usb_gadget_check_config() to verify UDC capability
usb: typec: Use sysfs_emit_at when concatenating the string
usb: typec: Iterate pds array when showing the pd list
usb: typec: Set port->pd before adding device for typec_port
usb: typec: qcom: fix return value check in qcom_pmic_typec_probe()
Revert "usb: gadget: tegra-xudc: Fix error check in tegra_xudc_powerdomain_init()"
Revert "usb: xhci: tegra: Fix error check"
USB: gadget: Fix the memory leak in raw_gadget driver
usb: gadget: core: remove unbalanced mutex_unlock in usb_gadget_activate
Revert "usb: dwc3: core: Enable AutoRetry feature in the controller"
Revert "xhci: add quirk for host controllers that don't update endpoint DCS"
USB: quirks: add quirk for Focusrite Scarlett
usb: xhci-mtk: set the dma max_seg_size
MAINTAINERS: drop invalid usb/cdns3 Reviewer e-mail
usb: dwc3: don't reset device side if dwc3 was configured as host-only
usb: typec: ucsi: move typec_set_mode(TYPEC_STATE_SAFE) to ucsi_unregister_partner()
usb: ohci-at91: Fix the unhandle interrupt when resume
...
Pull tty/serial fixes from Greg KH:
"Here are some small TTY and serial driver fixes for 6.5-rc4 for some
reported problems. Included in here is:
- TIOCSTI fix for braille readers
- documentation fix for minor numbers
- MAINTAINERS update for new serial files in -rc1
- minor serial driver fixes for reported problems
All of these have been in linux-next with no reported problems"
* tag 'tty-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_dw: Preserve original value of DLF register
tty: serial: sh-sci: Fix sleeping in atomic context
serial: sifive: Fix sifive_serial_console_setup() section
Documentation: devices.txt: reconcile serial/ucc_uart minor numers
MAINTAINERS: Update TTY layer for lists and recently added files
tty: n_gsm: fix UAF in gsm_cleanup_mux
TIOCSTI: always enable for CAP_SYS_ADMIN
Pull staging driver fixes from Greg KH:
"Here are three small staging driver fixes for 6.5-rc4 that resolve
some reported problems. These fixes are:
- fix for an old bug in the r8712 driver
- fbtft driver fix for a spi device
- potential overflow fix in the ks7010 driver
All of these have been in linux-next with no reported problems"
* tag 'staging-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: ks7010: potential buffer overflow in ks_wlan_set_encode_ext()
staging: fbtft: ili9341: use macro FBTFT_REGISTER_SPI_DRIVER
staging: r8712: Fix memory leak in _r8712_init_xmit_priv()
Pull char driver and Documentation fixes from Greg KH:
"Here is a char driver fix and some documentation updates for 6.5-rc4
that contain the following changes:
- sram/genalloc bugfix for reported problem
- security-bugs.rst update based on recent discussions
- embargoed-hardware-issues minor cleanups and then partial revert
for the project/company lists
All of these have been in linux-next for a while with no reported
problems, and the documentation updates have all been reviewed by the
relevant developers"
* tag 'char-misc-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
misc/genalloc: Name subpools by of_node_full_name()
Documentation: embargoed-hardware-issues.rst: add AMD to the list
Documentation: embargoed-hardware-issues.rst: clean out empty and unused entries
Documentation: security-bugs.rst: clarify CVE handling
Documentation: security-bugs.rst: update preferences when dealing with the linux-distros group
Pull probe fixes from Masami Hiramatsu:
- probe-events: add NULL check for some BTF API calls which can return
error code and NULL.
- ftrace selftests: check fprobe and kprobe event correctly. This fixes
a miss condition of the test command.
- kprobes: do not allow probing functions that start with "__cfi_" or
"__pfx_" since those are auto generated for kernel CFI and not
executed.
* tag 'probes-fixes-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kprobes: Prohibit probing on CFI preamble symbol
selftests/ftrace: Fix to check fprobe event eneblement
tracing/probes: Fix to add NULL check for BTF APIs
Pull kvm fixes from Paolo Bonzini:
"x86:
- Do not register IRQ bypass consumer if posted interrupts not
supported
- Fix missed device interrupt due to non-atomic update of IRR
- Use GFP_KERNEL_ACCOUNT for pid_table in ipiv
- Make VMREAD error path play nice with noinstr
- x86: Acquire SRCU read lock when handling fastpath MSR writes
- Support linking rseq tests statically against glibc 2.35+
- Fix reference count for stats file descriptors
- Detect userspace setting invalid CR0
Non-KVM:
- Remove coccinelle script that has caused multiple confusion
("debugfs, coccinelle: check for obsolete DEFINE_SIMPLE_ATTRIBUTE()
usage", acked by Greg)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
KVM: selftests: Expand x86's sregs test to cover illegal CR0 values
KVM: VMX: Don't fudge CR0 and CR4 for restricted L2 guest
KVM: x86: Disallow KVM_SET_SREGS{2} if incoming CR0 is invalid
Revert "debugfs, coccinelle: check for obsolete DEFINE_SIMPLE_ATTRIBUTE() usage"
KVM: selftests: Verify stats fd is usable after VM fd has been closed
KVM: selftests: Verify stats fd can be dup()'d and read
KVM: selftests: Verify userspace can create "redundant" binary stats files
KVM: selftests: Explicitly free vcpus array in binary stats test
KVM: selftests: Clean up stats fd in common stats_test() helper
KVM: selftests: Use pread() to read binary stats header
KVM: Grab a reference to KVM for VM and vCPU stats file descriptors
selftests/rseq: Play nice with binaries statically linked against glibc 2.35+
Revert "KVM: SVM: Skip WRMSR fastpath on VM-Exit if next RIP isn't valid"
KVM: x86: Acquire SRCU read lock when handling fastpath MSR writes
KVM: VMX: Use vmread_error() to report VM-Fail in "goto" path
KVM: VMX: Make VMREAD error path play nice with noinstr
KVM: x86/irq: Conditionally register IRQ bypass consumer again
KVM: X86: Use GFP_KERNEL_ACCOUNT for pid_table in ipiv
KVM: x86: check the kvm_cpu_get_interrupt result before using it
KVM: x86: VMX: set irr_pending in kvm_apic_update_irr
...
Pull locking fix from Borislav Petkov:
- Fix a rtmutex race condition resulting from sharing of the sort key
between the lock waiters and the PI chain tree (->pi_waiters) of a
task by giving each tree their own sort key
* tag 'locking_urgent_for_v6.5_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rtmutex: Fix task->pi_waiters integrity
Pull x86 fixes from Borislav Petkov:
- AMD's automatic IBRS doesn't enable cross-thread branch target
injection protection (STIBP) for user processes. Enable STIBP on such
systems.
- Do not delete (but put the ref instead) of AMD MCE error thresholding
sysfs kobjects when destroying them in order not to delete the kernfs
pointer prematurely
- Restore annotation in ret_from_fork_asm() in order to fix kthread
stack unwinding from being marked as unreliable and thus breaking
livepatching
* tag 'x86_urgent_for_v6.5_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Enable STIBP on AMD if Automatic IBRS is enabled
x86/MCE/AMD: Decrement threshold_bank refcount when removing threshold blocks
x86: Fix kthread unwind
Pull irq fixes from Borislav Petkov:
- Work around an erratum on GIC700, where a race between a CPU handling
a wake-up interrupt, a change of affinity, and another CPU going to
sleep can result in a lack of wake-up event on the next interrupt
- Fix the locking required on a VPE for GICv4
- Enable Rockchip 3588001 erratum workaround for RK3588S
- Fix the irq-bcm6345-l1 assumtions of the boot CPU always be the first
CPU in the system
* tag 'irq_urgent_for_v6.5_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3: Workaround for GIC-700 erratum 2941627
irqchip/gic-v3: Enable Rockchip 3588001 erratum workaround for RK3588S
irqchip/gic-v4.1: Properly lock VPEs when doing a directLPI invalidation
irq-bcm6345-l1: Do not assume a fixed block to cpu mapping
The HX3 comes in different variants (up to 4 USB 3.0 ports; multi-TT),
e.g. CYUSB330x/CYUSB331x/CYUSB332x/CYUSB230x. It operates with two
different power supplies: 1V2 and 3V3.
Add the support for this hub, for controlling the reset pin and the
power supplies.
Reset time is extracted from data sheet, page 24:
"The RESETN pin can be tied to VDD_IO through an external resistor and
to ground (GND) through an external capacitor (minimum 5 ms time
constant)."
V_IH min is given at 0.7 * 3V3 (page 34), therefore use 10ms.
Also add USB PIDs for the USB 2.0 and USB 3.0 root hub.
Acked-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Link: https://lore.kernel.org/r/20230620-hx3-v7-2-f79b4b22a1bf@skidata.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When USB_COMMON are not enabled, phy-rtk-usb2 and phy-rtk-usb3 suffers
a build error due to a missing usb_debug_root that is provided
by CONFIG_USB_COMMON, so make the driver select USB_COMMON.
or1k-linux-ld: drivers/phy/realtek/phy-rtk-usb2.o: in function `create_phy_debug_root':
>> drivers/phy/realtek/phy-rtk-usb2.c:715: undefined reference to `usb_debug_root'
>> or1k-linux-ld: drivers/phy/realtek/phy-rtk-usb2.c:715: undefined reference to `usb_debug_root'
or1k-linux-ld: drivers/phy/realtek/phy-rtk-usb3.o: in function `create_phy_debug_root':
>> drivers/phy/realtek/phy-rtk-usb3.c:349: undefined reference to `usb_debug_root'
>> or1k-linux-ld: drivers/phy/realtek/phy-rtk-usb3.c:349: undefined reference to `usb_debug_root'
Fixes: 134e6d25f6 ("phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY")
Fixed: adda6e82a7 ("phy: realtek: usb: Add driver for the Realtek SoC USB 3.0 PHY")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307290733.weSlHrGp-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202307291022.3pVeTR9z-lkp@intel.com/
Signed-off-by: Stanley Chang <stanley_chang@realtek.com>
Link: https://lore.kernel.org/r/20230729053029.6226-1-stanley_chang@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ohci_hcd_at91_drv_suspend() sets ohci->rh_state to OHCI_RH_HALTED when
suspend which will let the ohci_irq() skip the interrupt after resume. And
nobody to handle this interrupt.
According to the comment in ohci_hcd_at91_drv_suspend(), it need to reset
when resume from suspend(MEM) to fix by setting "hibernated" argument of
ohci_resume().
Signed-off-by: Guiting Shen <aarongt.shen@gmail.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230728120648.5878-1-aarongt.shen@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull smb client fixes from Steve French:
"Four small SMB3 client fixes:
- two reconnect fixes (to address the case where non-default
iocharset gets incorrectly overridden at reconnect with the
default charset)
- fix for NTLMSSP_AUTH request setting a flag incorrectly)
- Add missing check for invalid tlink (tree connection) in ioctl"
* tag '6.5-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: add missing return value check for cifs_sb_tlink
smb3: do not set NTLMSSP_VERSION flag for negotiate not auth request
cifs: fix charset issue in reconnection
fs/nls: make load_nls() take a const parameter
Pull tracing fixes from Steven Rostedt:
- Fix to /sys/kernel/tracing/per_cpu/cpu*/stats read and entries.
If a resize shrinks the buffer it clears the read count to notify
readers that they need to reset. But the read count is also used for
accounting and this causes the numbers to be off. Instead, create a
separate variable to use to notify readers to reset.
- Fix the ref counts of the "soft disable" mode. The wrong value was
used for testing if soft disable mode should be enabled or disable,
but instead, just change the logic to do the enable and disable in
place when the SOFT_MODE is set or cleared.
- Several kernel-doc fixes
- Removal of unused external declarations
* tag 'trace-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix warning in trace_buffered_event_disable()
ftrace: Remove unused extern declarations
tracing: Fix kernel-doc warnings in trace_seq.c
tracing: Fix kernel-doc warnings in trace_events_trigger.c
tracing/synthetic: Fix kernel-doc warnings in trace_events_synth.c
ring-buffer: Fix kernel-doc warnings in ring_buffer.c
ring-buffer: Fix wrong stat of cpu_buffer->read
Commit a2225d931f ("autofs: remove left-over autofs4 stubs")
promised the removal of the fs/autofs/Kconfig fragment for AUTOFS4_FS
within a couple of releases, but five years later this still has not
happened yet, and AUTOFS4_FS is still enabled in 63 defconfigs.
Get rid of it mechanically:
git grep -l CONFIG_AUTOFS4_FS -- '*defconfig' |
xargs sed -i 's/AUTOFS4_FS/AUTOFS_FS/'
Also just remove the AUTOFS4_FS config option stub. Anybody who hasn't
regenerated their config file in the last five years will need to just
get the new name right when they do.
Signed-off-by: Sven Joachim <svenjoac@gmx.de>
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull LoongArch fixes from Huacai Chen:
"Some bug fixes for build system, builtin cmdline handling, bpf and
{copy, clear}_user, together with a trivial cleanup"
* tag 'loongarch-fixes-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Cleanup __builtin_constant_p() checking for cpu_has_*
LoongArch: BPF: Fix check condition to call lu32id in move_imm()
LoongArch: BPF: Enable bpf_probe_read{, str}() on LoongArch
LoongArch: Fix return value underflow in exception path
LoongArch: Fix CMDLINE_EXTEND and CMDLINE_BOOTLOADER handling
LoongArch: Fix module relocation error with binutils 2.41
LoongArch: Only fiddle with CHECKFLAGS if `need-compiler'
Add coverage to x86's set_sregs_test to verify KVM rejects vendor-agnostic
illegal CR0 values, i.e. CR0 values whose legality doesn't depend on the
current VMX mode. KVM historically has neglected to reject bad CR0s from
userspace, i.e. would happily accept a completely bogus CR0 via
KVM_SET_SREGS{2}.
Punt VMX specific subtests to future work, as they would require quite a
bit more effort, and KVM gets coverage for CR0 checks in general through
other means, e.g. KVM-Unit-Tests.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230613203037.1968489-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stuff CR0 and/or CR4 to be compliant with a restricted guest if and only
if KVM itself is not configured to utilize unrestricted guests, i.e. don't
stuff CR0/CR4 for a restricted L2 that is running as the guest of an
unrestricted L1. Any attempt to VM-Enter a restricted guest with invalid
CR0/CR4 values should fail, i.e. in a nested scenario, KVM (as L0) should
never observe a restricted L2 with incompatible CR0/CR4, since nested
VM-Enter from L1 should have failed.
And if KVM does observe an active, restricted L2 with incompatible state,
e.g. due to a KVM bug, fudging CR0/CR4 instead of letting VM-Enter fail
does more harm than good, as KVM will often neglect to undo the side
effects, e.g. won't clear rmode.vm86_active on nested VM-Exit, and thus
the damage can easily spill over to L1. On the other hand, letting
VM-Enter fail due to bad guest state is more likely to contain the damage
to L2 as KVM relies on hardware to perform most guest state consistency
checks, i.e. KVM needs to be able to reflect a failed nested VM-Enter into
L1 irrespective of (un)restricted guest behavior.
Cc: Jim Mattson <jmattson@google.com>
Cc: stable@vger.kernel.org
Fixes: bddd82d19e ("KVM: nVMX: KVM needs to unset "unrestricted guest" VM-execution control in vmcs02 if vmcs12 doesn't set it")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230613203037.1968489-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reject KVM_SET_SREGS{2} with -EINVAL if the incoming CR0 is invalid,
e.g. due to setting bits 63:32, illegal combinations, or to a value that
isn't allowed in VMX (non-)root mode. The VMX checks in particular are
"fun" as failure to disallow Real Mode for an L2 that is configured with
unrestricted guest disabled, when KVM itself has unrestricted guest
enabled, will result in KVM forcing VM86 mode to virtual Real Mode for
L2, but then fail to unwind the related metadata when synthesizing a
nested VM-Exit back to L1 (which has unrestricted guest enabled).
Opportunistically fix a benign typo in the prototype for is_valid_cr4().
Cc: stable@vger.kernel.org
Reported-by: syzbot+5feef0b9ee9c8e9e5689@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000f316b705fdf6e2b4@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230613203037.1968489-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
