Most places that return an error code, like -EFAULT, do not set
HMM_PFN_ERROR, only two places do this.
Resolve this inconsistency by never setting the pfns on an error
exit. This doesn't seem like a worthwhile thing to do anyhow.
If for some reason it becomes important, it makes more sense to directly
return the address of the failing page rather than have the caller scan
for the HMM_PFN_ERROR.
No caller inspects the pnfs output array if hmm_range_fault() fails.
Link: https://lore.kernel.org/r/20200327200021.29372-9-jgg@ziepe.ca
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In hmm_vma_handle_pte() and hmm_vma_walk_hugetlb_entry() if fault happens
then -EBUSY will be returned and the pfns input flags will have been
destroyed.
For hmm_vma_handle_pte() set HMM_PFN_NONE only on the success returns that
don't otherwise store to pfns.
For hmm_vma_walk_hugetlb_entry() all exit paths already set pfns, so
remove the redundant store.
Fixes: 2aee09d8c1 ("mm/hmm: change hmm_vma_fault() to allow write fault on page basis")
Link: https://lore.kernel.org/r/20200327200021.29372-8-jgg@ziepe.ca
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that flags are handled on a fine-grained per-page basis this global
flag is redundant and has a confusing overlap with the pfn_flags_mask and
default_flags.
Normalize the HMM_FAULT_SNAPSHOT behavior into one place. Callers needing
the SNAPSHOT behavior should set a pfn_flags_mask and default_flags that
always results in a cleared HMM_PFN_VALID. Then no pages will be faulted,
and HMM_FAULT_SNAPSHOT is not a special flow that overrides the masking
mechanism.
As this is the last flag, also remove the flags argument. If future flags
are needed they can be part of the struct hmm_range function arguments.
Link: https://lore.kernel.org/r/20200327200021.29372-5-jgg@ziepe.ca
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Delete several functions that are never called, fix some desync between
comments and structure content, toss the now out of date top of file
header, and move one function only used by hmm.c into hmm.c
Link: https://lore.kernel.org/r/20200327200021.29372-4-jgg@ziepe.ca
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Using two bools instead of flags return is not necessary and leads to
bugs. Returning a value is easier for the compiler to check and easier to
pass around the code flow.
Convert the two bools into flags and push the change to all callers.
Link: https://lore.kernel.org/r/20200327200021.29372-3-jgg@ziepe.ca
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The checking boils down to some racy check if the pagemap is still
available or not. Instead of checking this, rely entirely on the
notifiers, if a pagemap is destroyed then all pages that belong to it must
be removed from the tables and the notifiers triggered.
Link: https://lore.kernel.org/r/20200327200021.29372-2-jgg@ziepe.ca
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
hmm_range_fault() will succeed for any kind of device private memory, even
if it doesn't belong to the calling entity. While nouveau has some crude
checks for that, they are broken because they assume nouveau is the only
user of device private memory. Fix this by passing in an expected pgmap
owner in the hmm_range_fault structure.
If a device_private page is found and doesn't match the owner then it is
treated as an non-present and non-faultable page.
This prevents a bug in amdgpu, where it doesn't know how to handle
device_private pages, but hmm_range_fault would return them anyhow.
Fixes: 4ef589dc9b ("mm/hmm/devmem: device memory hotplug using ZONE_DEVICE")
Link: https://lore.kernel.org/r/20200316193216.920734-5-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove the HMM_PFN_DEVICE_PRIVATE flag, no driver has ever set this flag
on input, and the only place that uses it on output can be trivially
changed to use is_device_private_page().
This removes the ability to request that device_private pages are faulted
back into system memory.
Link: https://lore.kernel.org/r/20200316193216.920734-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add a new src_owner field to struct migrate_vma. If the field is set,
only device private pages with page->pgmap->owner equal to that field are
migrated. If the field is not set only "normal" pages are migrated.
Fixes: df6ad69838 ("mm/device-public-memory: device memory cache coherent with CPU")
Link: https://lore.kernel.org/r/20200316193216.920734-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Tested-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Setting a pfns entry to NONE before returning -EBUSY is a bug that will
cause corruption of the input flags on the next loop.
There is just a single caller using hmm_vma_walk_hole_() for the non-fault
case. Use hmm_pfns_fill() to fill the whole pfn array with zeroes in the
only caller for the non-fault case and remove the non-fault path from
hmm_vma_walk_hole_(). This avoids setting NONE before returning -EBUSY.
Also rename the function to hmm_vma_fault() to better describe what it
does.
Fixes: 2aee09d8c1 ("mm/hmm: change hmm_vma_fault() to allow write fault on page basis")
Link: https://lore.kernel.org/r/20200316135310.899364-5-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
pmd_to_hmm_pfn_flags() already checks it and makes the cpu flags 0. If no
fault is requested then the pfns should be returned with the not valid
flags.
It should not unconditionally fault if faulting is not requested.
Fixes: 2aee09d8c1 ("mm/hmm: change hmm_vma_fault() to allow write fault on page basis")
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently if a special PTE is encountered hmm_range_fault() immediately
returns EFAULT and sets the HMM_PFN_SPECIAL error output (which nothing
uses).
EFAULT should only be returned after testing with hmm_pte_need_fault().
Also pte_devmap() and pte_special() are exclusive, and there is no need to
check IS_ENABLED, pte_special() is stubbed out to return false on
unsupported architectures.
Fixes: 992de9a8b7 ("mm/hmm: allow to mirror vma of a file on a DAX backed filesystem")
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
hmm_range_fault() should never return 0 if the caller requested a valid
page, but the pfns output for that page would be HMM_PFN_ERROR.
hmm_pte_need_fault() must always be called before setting HMM_PFN_ERROR to
detect if the page is in faulting mode or not.
Fix two cases in hmm_vma_walk_pmd() and reorganize some of the duplicated
code.
Fixes: d08faca018 ("mm/hmm: properly handle migration pmd")
Fixes: da4c3c735e ("mm/hmm/mirror: helper to snapshot CPU page table")
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The intention with this code is to determine if the caller required the
pages to be valid, and if so, then take some action to make them valid.
The action varies depending on the page type.
In all cases, if the caller doesn't ask for the page, then
hmm_range_fault() should not return an error.
Revise the implementation to be clearer, and fix some bugs:
- hmm_pte_need_fault() must always be called before testing fault or
write_fault otherwise the defaults of false apply and the if()'s don't
work. This was missed on the is_migration_entry() branch
- -EFAULT should not be returned unless hmm_pte_need_fault() indicates
fault is required - ie snapshotting should not fail.
- For !pte_present() the cpu_flags are always 0, except in the special
case of is_device_private_entry(), calling pte_to_hmm_pfn_flags() is
confusing.
Reorganize the flow so that it always follows the pattern of calling
hmm_pte_need_fault() and then checking fault || write_fault.
Fixes: 2aee09d8c1 ("mm/hmm: change hmm_vma_fault() to allow write fault on page basis")
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
All return paths that do EFAULT must call hmm_range_need_fault() to
determine if the user requires this page to be valid.
If the page cannot be made valid if the user later requires it, due to vma
flags in this case, then the return should be HMM_PFN_ERROR.
Fixes: a3e0d41c2b ("mm/hmm: improve driver API to work and wait over a range")
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
All success exit paths from the walker functions must set the pfns array.
A migration entry with no required fault is a HMM_PFN_NONE return, just
like the pte case.
Fixes: d08faca018 ("mm/hmm: properly handle migration pmd")
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This eventually calls into handle_mm_fault() which is a sleeping function.
Release the lock first.
hmm_vma_walk_hole() does not touch the contents of the PUD, so it does not
need the lock.
Fixes: 3afc423632 ("mm: pagewalk: add p4d_entry() and pgd_entry()")
Cc: Steven Price <steven.price@arm.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Many of the direct returns of error skipped doing the pte_unmap(). All non
zero exit paths must unmap the pte.
The pte_unmap() is split unnaturally like this because some of the error
exit paths trigger a sleep and must release the lock before sleeping.
Fixes: 992de9a8b7 ("mm/hmm: allow to mirror vma of a file on a DAX backed filesystem")
Fixes: 53f5c3f489 ("mm/hmm: factor out pte and pmd handling to simplify hmm_vma_walk_pmd()")
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Pull btrfs fixes from David Sterba:
"These are fixes that were found during testing with help of error
injection, plus some other stable material.
There's a fixup to patch added to rc1 causing locking in wrong context
warnings, tests found one more deadlock scenario. The patches are
tagged for stable, two of them now in the queue but we'd like all
three released at the same time.
I'm not happy about fixes to fixes in such a fast succession during
rcs, but I hope we found all the fallouts of commit 28553fa992
('Btrfs: fix race between shrinking truncate and fiemap')"
* tag 'for-5.6-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix deadlock during fast fsync when logging prealloc extents beyond eof
Btrfs: fix btrfs_wait_ordered_range() so that it waits for all ordered extents
btrfs: fix bytes_may_use underflow in prealloc error condtition
btrfs: handle logged extent failure properly
btrfs: do not check delayed items are empty for single transaction cleanup
btrfs: reset fs_root to NULL on error in open_ctree
btrfs: destroy qgroup extent records on transaction abort
Pull ext4 fixes from Ted Ts'o:
"More miscellaneous ext4 bug fixes (all stable fodder)"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix mount failure with quota configured as module
jbd2: fix ocfs2 corrupt when clearing block group bits
ext4: fix race between writepages and enabling EXT4_EXTENTS_FL
ext4: rename s_journal_flag_rwsem to s_writepages_rwsem
ext4: fix potential race between s_flex_groups online resizing and access
ext4: fix potential race between s_group_info online resizing and access
ext4: fix potential race between online resizing and write operations
ext4: add cond_resched() to __ext4_find_entry()
ext4: fix a data race in EXT4_I(inode)->i_disksize
Pull csky updates from Guo Ren:
"Sorry, I missed 5.6-rc1 merge window, but in this pull request the
most are the fixes and the rests are between fixes and features. The
only outside modification is the MAINTAINERS file update with our
mailing list.
- cache flush implementation fixes
- ftrace modify panic fix
- CONFIG_SMP boot problem fix
- fix pt_regs saving for atomic.S
- fix fixaddr_init without highmem.
- fix stack protector support
- fix fake Tightly-Coupled Memory code compile and use
- fix some typos and coding convention"
* tag 'csky-for-linus-5.6-rc3' of git://github.com/c-sky/csky-linux: (23 commits)
csky: Replace <linux/clk-provider.h> by <linux/of_clk.h>
csky: Implement copy_thread_tls
csky: Add PCI support
csky: Minimize defconfig to support buildroot config.fragment
csky: Add setup_initrd check code
csky: Cleanup old Kconfig options
arch/csky: fix some Kconfig typos
csky: Fixup compile warning for three unimplemented syscalls
csky: Remove unused cache implementation
csky: Fixup ftrace modify panic
csky: Add flush_icache_mm to defer flush icache all
csky: Optimize abiv2 copy_to_user_page with VM_EXEC
csky: Enable defer flush_dcache_page for abiv2 cpus (807/810/860)
csky: Remove unnecessary flush_icache_* implementation
csky: Support icache flush without specific instructions
csky/Kconfig: Add Kconfig.platforms to support some drivers
csky/smp: Fixup boot failed when CONFIG_SMP
csky: Set regs->usp to kernel sp, when the exception is from kernel
csky/mm: Fixup export invalid_pte_table symbol
csky: Separate fixaddr_init from highmem
...
The C-Sky platform code is not a clock provider, and just needs to call
of_clk_init().
Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Pull RAS fixes from Thomas Gleixner:
"Two fixes for the AMD MCE driver:
- Populate the per CPU MCA bank descriptor pointer only after it has
been completely set up to prevent a use-after-free in case that one
of the subsequent initialization step fails
- Implement a proper release function for the sysfs entries of MCA
threshold controls instead of freeing the memory right in the CPU
teardown code, which leads to another use-after-free when the
associated sysfs file is opened and accessed"
* tag 'ras-urgent-2020-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce/amd: Fix kobject lifetime
x86/mce/amd: Publish the bank pointer only after setup has succeeded
Pull irq fixes from Thomas Gleixner:
"Two fixes for the irq core code which are follow ups to the recent MSI
fixes:
- The WARN_ON which was put into the MSI setaffinity callback for
paranoia reasons actually triggered via a callchain which escaped
when all the possible ways to reach that code were analyzed.
The proc/irq/$N/*affinity interfaces have a quirk which came in
when ALPHA moved to the generic interface: In case that the written
affinity mask does not contain any online CPU it calls into ALPHAs
magic auto affinity setting code.
A few years later this mechanism was also made available to x86 for
no good reasons and in a way which circumvents all sanity checks
for interrupts which cannot have their affinity set from process
context on X86 due to the way the X86 interrupt delivery works.
It would be possible to make this work properly, but there is no
point in doing so. If the interrupt is not yet started then the
affinity setting has no effect and if it is started already then it
is already assigned to an online CPU so there is no point to
randomly move it to some other CPU. Just return EINVAL as the code
has done before that change forever.
- The new MSI quirk bit in the irq domain flags turned out to be
already occupied, which escaped the author and the reviewers
because the already in use bits were 0,6,2,3,4,5 listed in that
order.
That bit 6 was simply overlooked because the ordering was straight
forward linear otherwise. So the new bit ended up being a
duplicate.
Fix it up by switching the oddball 6 to the obvious 1"
* tag 'irq-urgent-2020-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/irqdomain: Make sure all irq domain flags are distinct
genirq/proc: Reject invalid affinity masks (again)
Pull x86 fixes from Thomas Gleixner:
"Two fixes for x86:
- Remove the __force_oder definiton from the kaslr boot code as it is
already defined in the page table code which makes GCC 10 builds
fail because it changed the default to -fno-common.
- Address the AMD erratum 1054 concerning the IRPERF capability and
enable the Instructions Retired fixed counter on machines which are
not affected by the erratum"
* tag 'x86-urgent-2020-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/amd: Enable the fixed Instructions Retired counter IRPERF
x86/boot/compressed: Don't declare __force_order in kaslr_64.c
Pull zonefs fix from Damien Le Moal:
"A single patch fixing typos in the documentation file"
* tag 'zonefs-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: fix documentation typos etc.
Pull io_uring fixes from Jens Axboe:
"Here's a small collection of fixes that were queued up:
- Remove unnecessary NULL check (Dan)
- Missing io_req_cancelled() call in fallocate (Pavel)
- Put the cleanup check for aux data in the right spot (Pavel)
- Two fixes for SQPOLL (Stefano, Xiaoguang)"
* tag 'io_uring-5.6-2020-02-22' of git://git.kernel.dk/linux-block:
io_uring: fix __io_iopoll_check deadlock in io_sq_thread
io_uring: prevent sq_thread from spinning when it should stop
io_uring: fix use-after-free by io_cleanup_req()
io_uring: remove unnecessary NULL checks
io_uring: add missing io_req_cancelled()
Pull block fixes from Jens Axboe:
"Just a set of NVMe fixes via Keith"
* tag 'block-5.6-2020-02-22' of git://git.kernel.dk/linux-block:
nvme-multipath: Fix memory leak with ana_log_buf
nvme: Fix uninitialized-variable warning
nvme-pci: Use single IRQ vector for old Apple models
nvme/pci: Add sleep quirk for Samsung and Toshiba drives
Pull SCSI fixes from James Bottomley:
"Four non-core fixes.
Two are reverts of target fixes which turned out to have unwanted side
effects, one is a revert of an RDMA fix with the same problem and the
final one fixes an incorrect warning about memory allocation failures
in megaraid_sas (the driver actually reduces the allocation size until
it succeeds)"
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: Revert "target: iscsi: Wait for all commands to finish before freeing a session"
scsi: Revert "RDMA/isert: Fix a recently introduced regression related to logout"
scsi: megaraid_sas: silence a warning
scsi: Revert "target/core: Inline transport_lun_remove_cmd()"
Pull s390 fixes from Vasily Gorbik:
- Remove ieee_emulation_warnings sysctl which is a dead code.
- Avoid triggering rebuild of the kernel during make install.
- Enable protected virtualization guest support in default configs.
- Fix cio_ignore seq_file .next function to increase position index.
And use kobj_to_dev instead of container_of in cio code.
- Fix storage block address lists to contain absolute addresses in qdio
code.
- Few clang warnings and spelling fixes.
* tag 's390-5.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/qdio: fill SBALEs with absolute addresses
s390/qdio: fill SL with absolute addresses
s390: remove obsolete ieee_emulation_warnings
s390: make 'install' not depend on vmlinux
s390/kaslr: Fix casts in get_random
s390/mm: Explicitly compare PAGE_DEFAULT_KEY against zero in storage_key_init_range
s390/pkey/zcrypt: spelling s/crytp/crypt/
s390/cio: use kobj_to_dev() API
s390/defconfig: enable CONFIG_PROTECTED_VIRTUALIZATION_GUEST
s390/cio: cio_ignore_proc_seq_next should increase position index
Since commit a3a0e43fd7 ("io_uring: don't enter poll loop if we have
CQEs pending"), if we already events pending, we won't enter poll loop.
In case SETUP_IOPOLL and SETUP_SQPOLL are both enabled, if app has
been terminated and don't reap pending events which are already in cq
ring, and there are some reqs in poll_list, io_sq_thread will enter
__io_iopoll_check(), and find pending events, then return, this loop
will never have a chance to exit.
I have seen this issue in fio stress tests, to fix this issue, let
io_sq_thread call io_iopoll_getevents() with argument 'min' being zero,
and remove __io_iopoll_check().
Fixes: a3a0e43fd7 ("io_uring: don't enter poll loop if we have CQEs pending")
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When CONFIG_QFMT_V2 is configured as a module, the test in
ext4_feature_set_ok() fails and so mount of filesystems with quota or
project features fails. Fix the test to use IS_ENABLED macro which
works properly even for modules.
Link: https://lore.kernel.org/r/20200221100835.9332-1-jack@suse.cz
Fixes: d65d87a074 ("ext4: improve explanation of a mount failure caused by a misconfigured kernel")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
If EXT4_EXTENTS_FL is set on an inode while ext4_writepages() is running
on it, the following warning in ext4_add_complete_io() can be hit:
WARNING: CPU: 1 PID: 0 at fs/ext4/page-io.c:234 ext4_put_io_end_defer+0xf0/0x120
Here's a minimal reproducer (not 100% reliable) (root isn't required):
while true; do
sync
done &
while true; do
rm -f file
touch file
chattr -e file
echo X >> file
chattr +e file
done
The problem is that in ext4_writepages(), ext4_should_dioread_nolock()
(which only returns true on extent-based files) is checked once to set
the number of reserved journal credits, and also again later to select
the flags for ext4_map_blocks() and copy the reserved journal handle to
ext4_io_end::handle. But if EXT4_EXTENTS_FL is being concurrently set,
the first check can see dioread_nolock disabled while the later one can
see it enabled, causing the reserved handle to unexpectedly be NULL.
Since changing EXT4_EXTENTS_FL is uncommon, and there may be other races
related to doing so as well, fix this by synchronizing changing
EXT4_EXTENTS_FL with ext4_writepages() via the existing
s_writepages_rwsem (previously called s_journal_flag_rwsem).
This was originally reported by syzbot without a reproducer at
https://syzkaller.appspot.com/bug?extid=2202a584a00fffd19fbf,
but now that dioread_nolock is the default I also started seeing this
when running syzkaller locally.
Link: https://lore.kernel.org/r/20200219183047.47417-3-ebiggers@kernel.org
Reported-by: syzbot+2202a584a00fffd19fbf@syzkaller.appspotmail.com
Fixes: 6b523df4fb ("ext4: use transaction reservation for extent conversion in ext4_end_io")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
During an online resize an array of s_flex_groups structures gets replaced
so it can get enlarged. If there is a concurrent access to the array and
this memory has been reused then this can lead to an invalid memory access.
The s_flex_group array has been converted into an array of pointers rather
than an array of structures. This is to ensure that the information
contained in the structures cannot get out of sync during a resize due to
an accessor updating the value in the old structure after it has been
copied but before the array pointer is updated. Since the structures them-
selves are no longer copied but only the pointers to them this case is
mitigated.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206443
Link: https://lore.kernel.org/r/20200221053458.730016-4-tytso@mit.edu
Signed-off-by: Suraj Jitindar Singh <surajjs@amazon.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Pull xen fixes from Juergen Gross:
"Two small fixes for Xen:
- a fix to avoid warnings with new gcc
- a fix for incorrectly disabled interrupts when calling
_cond_resched()"
* tag 'for-linus-5.6-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: Enable interrupts when calling _cond_resched()
x86/xen: Distribute switch variables for initialization
Pull arm64 fixes from Will Deacon:
"It's all straightforward apart from the changes to mmap()/mremap() in
relation to their handling of address arguments from userspace with
non-zero tag bits in the upper byte.
The change to brk() is necessary to fix a nasty user-visible
regression in malloc(), but we tightened up mmap() and mremap() at the
same time because they also allow the user to create virtual aliases
by accident. It's much less likely than brk() to matter in practice,
but enforcing the principle of "don't permit the creation of mappings
using tagged addresses" leads to a straightforward ABI without having
to worry about the "but what if a crazy program did foo?" aspect of
things.
Summary:
- Fix regression in malloc() caused by ignored address tags in brk()
- Add missing brackets around argument to untagged_addr() macro
- Fix clang build when using binutils assembler
- Fix silly typo in virtual memory map documentation"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
mm: Avoid creating virtual address aliases in brk()/mmap()/mremap()
docs: arm64: fix trivial spelling enought to enough in memory.rst
arm64: memory: Add missing brackets to untagged_addr() macro
arm64: lse: Fix LSE atomics with LLVM
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 5.6. This is two weeks worth as I was out
sick last week:
- Three fixes for the recently added VMAP_STACK on 32-bit.
- Three fixes related to hugepages on 8xx (32-bit).
- A fix for a bug in our transactional memory handling that could
lead to a kernel crash if we saw a page fault during signal
delivery.
- A fix for a deadlock in our PCI EEH (Enhanced Error Handling) code.
- A couple of other minor fixes.
Thanks to: Christophe Leroy, Erhard F, Frederic Barrat, Gustavo Luiz
Duarte, Larry Finger, Leonardo Bras, Oliver O'Halloran, Sam Bobroff"
* tag 'powerpc-5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/entry: Fix an #if which should be an #ifdef in entry_32.S
powerpc/xmon: Fix whitespace handling in getstring()
powerpc/6xx: Fix power_save_ppc32_restore() with CONFIG_VMAP_STACK
powerpc/chrp: Fix enter_rtas() with CONFIG_VMAP_STACK
powerpc/32s: Fix DSI and ISI exceptions for CONFIG_VMAP_STACK
powerpc/tm: Fix clearing MSR[TS] in current when reclaiming on signal delivery
powerpc/8xx: Fix clearing of bits 20-23 in ITLB miss
powerpc/hugetlb: Fix 8M hugepages on 8xx
powerpc/hugetlb: Fix 512k hugepages on 8xx with 16k page size
powerpc/eeh: Fix deadlock handling dead PHB
Pull watchdog fixes from Wim Van Sebroeck:
- mtk_wdt needs RESET_CONTROLLER to build
- da9062 driver fixes:
- fix power management ops
- do not ping the hw during stop()
- add dependency on I2C
* tag 'linux-watchdog-5.6-rc3' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: da9062: Add dependency on I2C
watchdog: da9062: fix power management ops
watchdog: da9062: do not ping the hw during stop()
watchdog: fix mtk_wdt.c RESET_CONTROLLER build error
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc driver fixes for 5.6-rc3.
Also included in here are some updates for some documentation files
that I seem to be maintaining these days.
The driver fixes are:
- small fixes for the habanalabs driver
- fsi driver bugfix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Documentation/process: Swap out the ambassador for Canonical
habanalabs: patched cb equals user cb in device memset
habanalabs: do not halt CoreSight during hard reset
habanalabs: halt the engines before hard-reset
MAINTAINERS: remove unnecessary ':' characters
fsi: aspeed: add unspecified HAS_IOMEM dependency
COPYING: state that all contributions really are covered by this file
Documentation/process: Change Microsoft contact for embargoed hardware issues
embargoed-hardware-issues: drop Amazon contact as the email address now bounces
Documentation/process: Add Arm contact for embargoed HW issues
