A null dereference or oops exception will eventually occur when qla1280.c
driver is compiled with DEBUG_QLA1280 enabled and ql_debug_level > 2. I
think its clear from the code that the intention here is sg_dma_len(s) not
length of sg_next(s) when printing the debug info.
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://lore.kernel.org/r/20250125095033.26188-1-linmag7@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In StorVSC, payload->range.len is used to indicate if this SCSI command
carries payload. This data is allocated as part of the private driver data
by the upper layer and may get passed to lower driver uninitialized.
For example, the SCSI error handling mid layer may send TEST_UNIT_READY or
REQUEST_SENSE while reusing the buffer from a failed command. The private
data section may have stale data from the previous command.
If the SCSI command doesn't carry payload, the driver may use this value as
is for communicating with host, resulting in possible corruption.
Fix this by always initializing this value.
Fixes: be0cf6ca30 ("scsi: storvsc: Set the tablesize based on the information given by the host")
Cc: stable@kernel.org
Tested-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://lore.kernel.org/r/1737601642-7759-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
devm_blk_crypto_profile_init() registers a cleanup handler to run when
the associated (platform-) device is being released. For UFS, the
crypto private data and pointers are stored as part of the ufs_hba's
data structure 'struct ufs_hba::crypto_profile'. This structure is
allocated as part of the underlying ufshcd and therefore Scsi_host
allocation.
During driver release or during error handling in ufshcd_pltfrm_init(),
this structure is released as part of ufshcd_dealloc_host() before the
(platform-) device associated with the crypto call above is released.
Once this device is released, the crypto cleanup code will run, using
the just-released 'struct ufs_hba::crypto_profile'. This causes a
use-after-free situation:
Call trace:
kfree+0x60/0x2d8 (P)
kvfree+0x44/0x60
blk_crypto_profile_destroy_callback+0x28/0x70
devm_action_release+0x1c/0x30
release_nodes+0x6c/0x108
devres_release_all+0x98/0x100
device_unbind_cleanup+0x20/0x70
really_probe+0x218/0x2d0
In other words, the initialisation code flow is:
platform-device probe
ufshcd_pltfrm_init()
ufshcd_alloc_host()
scsi_host_alloc()
allocation of struct ufs_hba
creation of scsi-host devices
devm_blk_crypto_profile_init()
devm registration of cleanup handler using platform-device
and during error handling of ufshcd_pltfrm_init() or during driver
removal:
ufshcd_dealloc_host()
scsi_host_put()
put_device(scsi-host)
release of struct ufs_hba
put_device(platform-device)
crypto cleanup handler
To fix this use-after free, change ufshcd_alloc_host() to register a
devres action to automatically cleanup the underlying SCSI device on
ufshcd destruction, without requiring explicit calls to
ufshcd_dealloc_host(). This way:
* the crypto profile and all other ufs_hba-owned resources are
destroyed before SCSI (as they've been registered after)
* a memleak is plugged in tc-dwc-g210-pci.c remove() as a
side-effect
* EXPORT_SYMBOL_GPL(ufshcd_dealloc_host) can be removed fully as
it's not needed anymore
* no future drivers using ufshcd_alloc_host() could ever forget
adding the cleanup
Fixes: cb77cb5abe ("blk-crypto: rename blk_keyslot_manager to blk_crypto_profile")
Fixes: d76d9d7d10 ("scsi: ufs: use devm_blk_ksm_init()")
Cc: stable@vger.kernel.org
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250124-ufshcd-fix-v4-1-c5d0144aae59@linaro.org
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fail I/Os instead of retry to prevent user space processes from being
blocked on the I/O completion for several minutes.
Retrying I/Os during "depopulation in progress" or "depopulation restore in
progress" results in a continuous retry loop until the depopulation
completes or until the I/O retry loop is aborted due to a timeout by the
scsi_cmd_runtime_exceeced().
Depopulation is slow and can take 24+ hours to complete on 20+ TB HDDs.
Most I/Os in the depopulation retry loop end up taking several minutes
before returning the failure to user space.
Cc: stable@vger.kernel.org # 4.18.x: 2bbeb8d scsi: core: Handle depopulation and restoration in progress
Cc: stable@vger.kernel.org # 4.18.x
Fixes: e37c7d9a03 ("scsi: core: sanitize++ in progress")
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Link: https://lore.kernel.org/r/20250131184408.859579-1-ipylypiv@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Filesystems can write to disk from page reclaim with __GFP_FS
set. Marc found a case where scsi_realloc_sdev_budget_map() ends up in
page reclaim with GFP_KERNEL, where it could try to take filesystem
locks again, leading to a deadlock.
WARNING: possible circular locking dependency detected
6.13.0 #1 Not tainted
------------------------------------------------------
kswapd0/70 is trying to acquire lock:
ffff8881025d5d78 (&q->q_usage_counter(io)){++++}-{0:0}, at: blk_mq_submit_bio+0x461/0x6e0
but task is already holding lock:
ffffffff81ef5f40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x9f/0x760
The full lockdep splat can be found in Marc's report:
https://lkml.org/lkml/2025/1/24/1101
Avoid the potential deadlock by doing the allocation with GFP_NOIO, which
prevents both filesystem and block layer recursion.
Reported-by: Marc Aurèle La France <tsi@tuyoix.net>
Signed-off-by: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/r/20250129104525.0ae8421e@fangorn
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This commit addresses an issue where clk_gating.state is being toggled in
ufshcd_setup_clocks() even if clock gating is not allowed.
The fix is to add a check for hba->clk_gating.is_initialized before toggling
clk_gating.state in ufshcd_setup_clocks().
Since clk_gating.lock is now initialized unconditionally, it can no longer
lead to the spinlock being used before it is properly initialized, but
instead it is mostly for documentation purposes.
Fixes: 1ab27c9cf8 ("ufs: Add support for clock gating")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20250128071207.75494-3-avri.altman@wdc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Address a lockdep warning triggered by the use of the clk_gating.lock before
it is properly initialized. The warning is as follows:
[ 4.388838] INFO: trying to register non-static key.
[ 4.395673] The code is fine but needs lockdep annotation, or maybe
[ 4.402118] you didn't initialize this object before use?
[ 4.407673] turning off the locking correctness validator.
[ 4.413334] CPU: 5 UID: 0 PID: 58 Comm: kworker/u32:1 Not tainted 6.12-rc1 #185
[ 4.413343] Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
[ 4.413362] Call trace:
[ 4.413364] show_stack+0x18/0x24 (C)
[ 4.413374] dump_stack_lvl+0x90/0xd0
[ 4.413384] dump_stack+0x18/0x24
[ 4.413392] register_lock_class+0x498/0x4a8
[ 4.413400] __lock_acquire+0xb4/0x1b90
[ 4.413406] lock_acquire+0x114/0x310
[ 4.413413] _raw_spin_lock_irqsave+0x60/0x88
[ 4.413423] ufshcd_setup_clocks+0x2c0/0x490
[ 4.413433] ufshcd_init+0x198/0x10ec
[ 4.413437] ufshcd_pltfrm_init+0x600/0x7c0
[ 4.413444] ufs_qcom_probe+0x20/0x58
[ 4.413449] platform_probe+0x68/0xd8
[ 4.413459] really_probe+0xbc/0x268
[ 4.413466] __driver_probe_device+0x78/0x12c
[ 4.413473] driver_probe_device+0x40/0x11c
[ 4.413481] __device_attach_driver+0xb8/0xf8
[ 4.413489] bus_for_each_drv+0x84/0xe4
[ 4.413495] __device_attach+0xfc/0x18c
[ 4.413502] device_initial_probe+0x14/0x20
[ 4.413510] bus_probe_device+0xb0/0xb4
[ 4.413517] deferred_probe_work_func+0x8c/0xc8
[ 4.413524] process_scheduled_works+0x250/0x658
[ 4.413534] worker_thread+0x15c/0x2c8
[ 4.413542] kthread+0x134/0x200
[ 4.413550] ret_from_fork+0x10/0x20
To fix this issue, ensure that the spinlock is only used after it has been
properly initialized before using it in ufshcd_setup_clocks(). Do that
unconditionally as initializing a spinlock is a fast operation.
Fixes: 209f4e43b8 ("scsi: ufs: core: Introduce a new clock_gating lock")
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20250128071207.75494-2-avri.altman@wdc.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull turbostat updates from Len Brown:
- Fix regression that affinitized forked child in one-shot mode.
- Harden one-shot mode against hotplug online/offline
- Enable RAPL SysWatt column by default
- Add initial PTL, CWF platform support
- Harden initial PMT code in response to early use
- Enable first built-in PMT counter: CWF c1e residency
- Refuse to run on unsupported platforms without --force, to encourage
updating to a version that supports the system, and to avoid
no-so-useful measurement results
* tag 'turbostat-2025.02.02' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (25 commits)
tools/power turbostat: version 2025.02.02
tools/power turbostat: Add CPU%c1e BIC for CWF
tools/power turbostat: Harden one-shot mode against cpu offline
tools/power turbostat: Fix forked child affinity regression
tools/power turbostat: Add tcore clock PMT type
tools/power turbostat: version 2025.01.14
tools/power turbostat: Allow adding PMT counters directly by sysfs path
tools/power turbostat: Allow mapping multiple PMT files with the same GUID
tools/power turbostat: Add PMT directory iterator helper
tools/power turbostat: Extend PMT identification with a sequence number
tools/power turbostat: Return default value for unmapped PMT domains
tools/power turbostat: Check for non-zero value when MSR probing
tools/power turbostat: Enhance turbostat self-performance visibility
tools/power turbostat: Add fixed RAPL PSYS divisor for SPR
tools/power turbostat: Fix PMT mmaped file size rounding
tools/power turbostat: Remove SysWatt from DISABLED_BY_DEFAULT
tools/power turbostat: Add an NMI column
tools/power turbostat: add Busy% to "show idle"
tools/power turbostat: Introduce --force parameter
tools/power turbostat: Improve --help output
...
Pull sh updates from John Paul Adrian Glaubitz:
"Fixes and improvements for sh:
- replace seq_printf() with the more efficient
seq_put_decimal_ull_width() to increase performance when stress
reading /proc/interrupts (David Wang)
- migrate sh to the generic rule for built-in DTB to help avoid race
conditions during parallel builds which can occur because Kbuild
decends into arch/*/boot/dts twice (Masahiro Yamada)
- replace select with imply in the board Kconfig for enabling
hardware with complex dependencies. This addresses warnings which
were reported by the kernel test robot (Geert Uytterhoeven)"
* tag 'sh-for-v6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: boards: Use imply to enable hardware with complex dependencies
sh: Migrate to the generic rule for built-in DTB
sh: irq: Use seq_put_decimal_ull_width() for decimal values
Summary of Changes since 2024.11.30:
Fix regression in 2023.11.07 that affinitized forked child
in one-shot mode.
Harden one-shot mode against hotplug online/offline
Enable RAPL SysWatt column by default.
Add initial PTL, CWF platform support.
Harden initial PMT code in response to early use.
Enable first built-in PMT counter: CWF c1e residency
Refuse to run on unsupported platforms without --force,
to encourage updating to a version that supports the system,
and to avoid no-so-useful measurement results.
Signed-off-by: Len Brown <len.brown@intel.com>
Pull misc vfs cleanups from Al Viro:
"Two unrelated patches - one is a removal of long-obsolete include in
overlayfs (it used to need fs/internal.h, but the extern it wanted has
been moved back to include/linux/namei.h) and another introduces
convenience helper constructing struct qstr by a NUL-terminated
string"
* tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
add a string-to-qstr constructor
fs/overlayfs/namei.c: get rid of include ../internal.h
Pull MIPS fix from Thomas Bogendoerfer:
"Revert commit breaking sysv ipc for o32 ABI"
* tag 'mips_6.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
Revert "mips: fix shmctl/semctl/msgctl syscall for o32"
Pull more smb client updates from Steve French:
- various updates for special file handling: symlink handling,
support for creating sockets, cleanups, new mount options (e.g. to
allow disabling using reparse points for them, and to allow
overriding the way symlinks are saved), and fixes to error paths
- fix for kerberos mounts (allow IAKerb)
- SMB1 fix for stat and for setting SACL (auditing)
- fix an incorrect error code mapping
- cleanups"
* tag 'v6.14-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: (21 commits)
cifs: Fix parsing native symlinks directory/file type
cifs: update internal version number
cifs: Add support for creating WSL-style symlinks
smb3: add support for IAKerb
cifs: Fix struct FILE_ALL_INFO
cifs: Add support for creating NFS-style symlinks
cifs: Add support for creating native Windows sockets
cifs: Add mount option -o reparse=none
cifs: Add mount option -o symlink= for choosing symlink create type
cifs: Fix creating and resolving absolute NT-style symlinks
cifs: Simplify reparse point check in cifs_query_path_info() function
cifs: Remove symlink member from cifs_open_info_data union
cifs: Update description about ACL permissions
cifs: Rename struct reparse_posix_data to reparse_nfs_data_buffer and move to common/smb2pdu.h
cifs: Remove struct reparse_posix_data from struct cifs_open_info_data
cifs: Remove unicode parameter from parse_reparse_point() function
cifs: Fix getting and setting SACLs over SMB1
cifs: Remove intermediate object of failed create SFU call
cifs: Validate EAs for WSL reparse points
cifs: Change translation of STATUS_PRIVILEGE_NOT_HELD to -EPERM
...
Pull debugfs fix from Greg KH:
"Here is a single debugfs fix from Al to resolve a reported regression
in the driver-core tree. It has been reported to fix the issue"
* tag 'driver-core-6.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
debugfs: Fix the missing initializations in __debugfs_file_get()
Pull misc fixes from Andrew Morton:
"21 hotfixes. 8 are cc:stable and the remainder address post-6.13
issues. 13 are for MM and 8 are for non-MM.
All are singletons, please see the changelogs for details"
* tag 'mm-hotfixes-stable-2025-02-01-03-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
MAINTAINERS: include linux-mm for xarray maintenance
revert "xarray: port tests to kunit"
MAINTAINERS: add lib/test_xarray.c
mailmap, MAINTAINERS, docs: update Carlos's email address
mm/hugetlb: fix hugepage allocation for interleaved memory nodes
mm: gup: fix infinite loop within __get_longterm_locked
mm, swap: fix reclaim offset calculation error during allocation
.mailmap: update email address for Christopher Obbard
kfence: skip __GFP_THISNODE allocations on NUMA systems
nilfs2: fix possible int overflows in nilfs_fiemap()
mm: compaction: use the proper flag to determine watermarks
kernel: be more careful about dup_mmap() failures and uprobe registering
mm/fake-numa: handle cases with no SRAT info
mm: kmemleak: fix upper boundary check for physical address objects
mailmap: add an entry for Hamza Mahfooz
MAINTAINERS: mailmap: update Yosry Ahmed's email address
scripts/gdb: fix aarch64 userspace detection in get_current_task
mm/vmscan: accumulate nr_demoted for accurate demotion statistics
ocfs2: fix incorrect CPU endianness conversion causing mount failure
mm/zsmalloc: add __maybe_unused attribute for is_first_zpdesc()
...
Pull media fix from Mauro Carvalho Chehab:
"A revert for a regression in the uvcvideo driver"
* tag 'media/v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
Revert "media: uvcvideo: Require entities to have a non-zero unique ID"
gather_bootmem_prealloc() assumes the start nid as 0 and size as
num_node_state(N_MEMORY). That means in case if memory attached numa
nodes are interleaved, then gather_bootmem_prealloc_parallel() will fail
to scan few of these nodes.
Since memory attached numa nodes can be interleaved in any fashion, hence
ensure that the current code checks for all numa node ids
(.size = nr_node_ids). Let's still keep max_threads as N_MEMORY, so that
it can distributes all nr_node_ids among the these many no. threads.
e.g. qemu cmdline
========================
numa_cmd="-numa node,nodeid=1,memdev=mem1,cpus=2-3 -numa node,nodeid=0,cpus=0-1 -numa dist,src=0,dst=1,val=20"
mem_cmd="-object memory-backend-ram,id=mem1,size=16G"
w/o this patch for cmdline (default_hugepagesz=1GB hugepagesz=1GB hugepages=2):
==========================
~ # cat /proc/meminfo |grep -i huge
AnonHugePages: 0 kB
ShmemHugePages: 0 kB
FileHugePages: 0 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 1048576 kB
Hugetlb: 0 kB
with this patch for cmdline (default_hugepagesz=1GB hugepagesz=1GB hugepages=2):
===========================
~ # cat /proc/meminfo |grep -i huge
AnonHugePages: 0 kB
ShmemHugePages: 0 kB
FileHugePages: 0 kB
HugePages_Total: 2
HugePages_Free: 2
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 1048576 kB
Hugetlb: 2097152 kB
Link: https://lkml.kernel.org/r/f8d8dad3a5471d284f54185f65d575a6aaab692b.1736592534.git.ritesh.list@gmail.com
Fixes: b78b27d029 ("hugetlb: parallelize 1G hugetlb initialization")
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reported-by: Pavithra Prakash <pavrampu@linux.ibm.com>
Suggested-by: Muchun Song <muchun.song@linux.dev>
Tested-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Reviewed-by: Luiz Capitulino <luizcap@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: Gang Li <gang.li@linux.dev>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since nilfs_bmap_lookup_contig() in nilfs_fiemap() calculates its result
by being prepared to go through potentially maxblocks == INT_MAX blocks,
the value in n may experience an overflow caused by left shift of blkbits.
While it is extremely unlikely to occur, play it safe and cast right hand
expression to wider type to mitigate the issue.
Found by Linux Verification Center (linuxtesting.org) with static analysis
tool SVACE.
Link: https://lkml.kernel.org/r/20250124222133.5323-1-konishi.ryusuke@gmail.com
Fixes: 622daaff0a ("nilfs2: fiemap support")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are 4 NUMA nodes on my machine, and each NUMA node has 32GB of
memory. I have configured 16GB of CMA memory on each NUMA node, and
starting a 32GB virtual machine with device passthrough is extremely slow,
taking almost an hour.
Long term GUP cannot allocate memory from CMA area, so a maximum of 16 GB
of no-CMA memory on a NUMA node can be used as virtual machine memory.
There is 16GB of free CMA memory on a NUMA node, which is sufficient to
pass the order-0 watermark check, causing the __compaction_suitable()
function to consistently return true.
For costly allocations, if the __compaction_suitable() function always
returns true, it causes the __alloc_pages_slowpath() function to fail to
exit at the appropriate point. This prevents timely fallback to
allocating memory on other nodes, ultimately resulting in excessively long
virtual machine startup times.
Call trace:
__alloc_pages_slowpath
if (compact_result == COMPACT_SKIPPED ||
compact_result == COMPACT_DEFERRED)
goto nopage; // should exit __alloc_pages_slowpath() from here
We could use the real unmovable allocation context to have
__zone_watermark_unusable_free() subtract CMA pages, and thus we won't
pass the order-0 check anymore once the non-CMA part is exhausted. There
is some risk that in some different scenario the compaction could in fact
migrate pages from the exhausted non-CMA part of the zone to the CMA part
and succeed, and we'll skip it instead. But only __GFP_NORETRY
allocations should be affected in the immediate "goto nopage" when
compaction is skipped, others will attempt with DEF_COMPACT_PRIORITY
anyway and won't fail without trying to compact-migrate the non-CMA
pageblocks into CMA pageblocks first, so it should be fine.
After this fix, it only takes a few tens of seconds to start a 32GB
virtual machine with device passthrough functionality.
Link: https://lore.kernel.org/lkml/1736335854-548-1-git-send-email-yangge1116@126.com/
Link: https://lkml.kernel.org/r/1737788037-8439-1-git-send-email-yangge1116@126.com
Signed-off-by: yangge <yangge1116@126.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If a memory allocation fails during dup_mmap(), the maple tree can be left
in an unsafe state for other iterators besides the exit path. All the
locks are dropped before the exit_mmap() call (in mm/mmap.c), but the
incomplete mm_struct can be reached through (at least) the rmap finding
the vmas which have a pointer back to the mm_struct.
Up to this point, there have been no issues with being able to find an
mm_struct that was only partially initialised. Syzbot was able to make
the incomplete mm_struct fail with recent forking changes, so it has been
proven unsafe to use the mm_struct that hasn't been initialised, as
referenced in the link below.
Although 8ac662f5da ("fork: avoid inappropriate uprobe access to
invalid mm") fixed the uprobe access, it does not completely remove the
race.
This patch sets the MMF_OOM_SKIP to avoid the iteration of the vmas on the
oom side (even though this is extremely unlikely to be selected as an oom
victim in the race window), and sets MMF_UNSTABLE to avoid other potential
users from using a partially initialised mm_struct.
When registering vmas for uprobe, skip the vmas in an mm that is marked
unstable. Modifying a vma in an unstable mm may cause issues if the mm
isn't fully initialised.
Link: https://lore.kernel.org/all/6756d273.050a0220.2477f.003d.GAE@google.com/
Link: https://lkml.kernel.org/r/20250127170221.1761366-1-Liam.Howlett@oracle.com
Fixes: d240629148 ("fork: use __mt_dup() to duplicate maple tree in dup_mmap()")
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Memblock allocations are registered by kmemleak separately, based on their
physical address. During the scanning stage, it checks whether an object
is within the min_low_pfn and max_low_pfn boundaries and ignores it
otherwise.
With the recent addition of __percpu pointer leak detection (commit
6c99d4eb7c ("kmemleak: enable tracking for percpu pointers")), kmemleak
started reporting leaks in setup_zone_pageset() and
setup_per_cpu_pageset(). These were caused by the node_data[0] object
(initialised in alloc_node_data()) ending on the PFN_PHYS(max_low_pfn)
boundary. The non-strict upper boundary check introduced by commit
84c3262991 ("mm: kmemleak: check physical address when scan") causes the
pg_data_t object to be ignored (not scanned) and the __percpu pointers it
contains to be reported as leaks.
Make the max_low_pfn upper boundary check strict when deciding whether to
ignore a physical address object and not scan it.
Link: https://lkml.kernel.org/r/20250127184233.2974311-1-catalin.marinas@arm.com
Fixes: 84c3262991 ("mm: kmemleak: check physical address when scan")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Cc: Patrick Wang <patrick.wang.shcn@gmail.com>
Cc: <stable@vger.kernel.org> [6.0.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit c1b3bb73d5 ("mm/zsmalloc: use zpdesc in
trylock_zspage()/lock_zspage()") introduces is_first_zpdesc() function.
However, the function is only used when CONFIG_DEBUG_VM=y.
When building with LLVM=1 and W=1 option, the following warning is
generated:
$ make -j12 W=1 LLVM=1 mm/zsmalloc.o
mm/zsmalloc.c:455:20: error: function 'is_first_zpdesc' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]
455 | static inline bool is_first_zpdesc(struct zpdesc *zpdesc)
| ^~~~~~~~~~~~~~~
1 error generated.
Fix the warning by adding __maybe_unused attribute to the function.
No functional change intended.
Link: https://lkml.kernel.org/r/20250127231631.4363-1-42.hyeyoo@gmail.com
Fixes: c1b3bb73d5 ("mm/zsmalloc: use zpdesc in trylock_zspage()/lock_zspage()")
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501240958.4ILzuBrH-lkp@intel.com/
Cc: Alex Shi <alexs@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This fixes the following hard lockup in isolate_lru_folios() during memory
reclaim. If the LRU mostly contains ineligible folios this may trigger
watchdog.
watchdog: Watchdog detected hard LOCKUP on cpu 173
RIP: 0010:native_queued_spin_lock_slowpath+0x255/0x2a0
Call Trace:
_raw_spin_lock_irqsave+0x31/0x40
folio_lruvec_lock_irqsave+0x5f/0x90
folio_batch_move_lru+0x91/0x150
lru_add_drain_per_cpu+0x1c/0x40
process_one_work+0x17d/0x350
worker_thread+0x27b/0x3a0
kthread+0xe8/0x120
ret_from_fork+0x34/0x50
ret_from_fork_asm+0x1b/0x30
lruvec->lru_lock owner：
PID: 2865 TASK: ffff888139214d40 CPU: 40 COMMAND: "kswapd0"
#0 [fffffe0000945e60] crash_nmi_callback at ffffffffa567a555
#1 [fffffe0000945e68] nmi_handle at ffffffffa563b171
#2 [fffffe0000945eb0] default_do_nmi at ffffffffa6575920
#3 [fffffe0000945ed0] exc_nmi at ffffffffa6575af4
#4 [fffffe0000945ef0] end_repeat_nmi at ffffffffa6601dde
[exception RIP: isolate_lru_folios+403]
RIP: ffffffffa597df53 RSP: ffffc90006fb7c28 RFLAGS: 00000002
RAX: 0000000000000001 RBX: ffffc90006fb7c60 RCX: ffffea04a2196f88
RDX: ffffc90006fb7c60 RSI: ffffc90006fb7c60 RDI: ffffea04a2197048
RBP: ffff88812cbd3010 R8: ffffea04a2197008 R9: 0000000000000001
R10: 0000000000000000 R11: 0000000000000001 R12: ffffea04a2197008
R13: ffffea04a2197048 R14: ffffc90006fb7de8 R15: 0000000003e3e937
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
<NMI exception stack>
#5 [ffffc90006fb7c28] isolate_lru_folios at ffffffffa597df53
#6 [ffffc90006fb7cf8] shrink_active_list at ffffffffa597f788
#7 [ffffc90006fb7da8] balance_pgdat at ffffffffa5986db0
#8 [ffffc90006fb7ec0] kswapd at ffffffffa5987354
#9 [ffffc90006fb7ef8] kthread at ffffffffa5748238
crash>
Scenario:
User processe are requesting a large amount of memory and keep page active.
Then a module continuously requests memory from ZONE_DMA32 area.
Memory reclaim will be triggered due to ZONE_DMA32 watermark alarm reached.
However pages in the LRU(active_anon) list are mostly from
the ZONE_NORMAL area.
Reproduce:
Terminal 1: Construct to continuously increase pages active(anon).
mkdir /tmp/memory
mount -t tmpfs -o size=1024000M tmpfs /tmp/memory
dd if=/dev/zero of=/tmp/memory/block bs=4M
tail /tmp/memory/block
Terminal 2:
vmstat -a 1
active will increase.
procs ---memory--- ---swap-- ---io---- -system-- ---cpu--- ...
r b swpd free inact active si so bi bo
1 0 0 1445623076 45898836 83646008 0 0 0
1 0 0 1445623076 43450228 86094616 0 0 0
1 0 0 1445623076 41003480 88541364 0 0 0
1 0 0 1445623076 38557088 90987756 0 0 0
1 0 0 1445623076 36109688 93435156 0 0 0
1 0 0 1445619552 33663256 95881632 0 0 0
1 0 0 1445619804 31217140 98327792 0 0 0
1 0 0 1445619804 28769988 100774944 0 0 0
1 0 0 1445619804 26322348 103222584 0 0 0
1 0 0 1445619804 23875592 105669340 0 0 0
cat /proc/meminfo | head
Active(anon) increase.
MemTotal: 1579941036 kB
MemFree: 1445618500 kB
MemAvailable: 1453013224 kB
Buffers: 6516 kB
Cached: 128653956 kB
SwapCached: 0 kB
Active: 118110812 kB
Inactive: 11436620 kB
Active(anon): 115345744 kB
Inactive(anon): 945292 kB
When the Active(anon) is 115345744 kB, insmod module triggers
the ZONE_DMA32 watermark.
perf record -e vmscan:mm_vmscan_lru_isolate -aR
perf script
isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=2
nr_skipped=2 nr_taken=0 lru=active_anon
isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=0
nr_skipped=0 nr_taken=0 lru=active_anon
isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=28835844
nr_skipped=28835844 nr_taken=0 lru=active_anon
isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=28835844
nr_skipped=28835844 nr_taken=0 lru=active_anon
isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=29
nr_skipped=29 nr_taken=0 lru=active_anon
isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=0
nr_skipped=0 nr_taken=0 lru=active_anon
See nr_scanned=28835844.
28835844 * 4k = 115343376KB approximately equal to 115345744 kB.
If increase Active(anon) to 1000G then insmod module triggers
the ZONE_DMA32 watermark. hard lockup will occur.
In my device nr_scanned = 0000000003e3e937 when hard lockup.
Convert to memory size 0x0000000003e3e937 * 4KB = 261072092 KB.
[ffffc90006fb7c28] isolate_lru_folios at ffffffffa597df53
ffffc90006fb7c30: 0000000000000020 0000000000000000
ffffc90006fb7c40: ffffc90006fb7d40 ffff88812cbd3000
ffffc90006fb7c50: ffffc90006fb7d30 0000000106fb7de8
ffffc90006fb7c60: ffffea04a2197008 ffffea0006ed4a48
ffffc90006fb7c70: 0000000000000000 0000000000000000
ffffc90006fb7c80: 0000000000000000 0000000000000000
ffffc90006fb7c90: 0000000000000000 0000000000000000
ffffc90006fb7ca0: 0000000000000000 0000000003e3e937
ffffc90006fb7cb0: 0000000000000000 0000000000000000
ffffc90006fb7cc0: 8d7c0b56b7874b00 ffff88812cbd3000
About the Fixes:
Why did it take eight years to be discovered?
The problem requires the following conditions to occur:
1. The device memory should be large enough.
2. Pages in the LRU(active_anon) list are mostly from the ZONE_NORMAL area.
3. The memory in ZONE_DMA32 needs to reach the watermark.
If the memory is not large enough, or if the usage design of ZONE_DMA32
area memory is reasonable, this problem is difficult to detect.
notes:
The problem is most likely to occur in ZONE_DMA32 and ZONE_NORMAL,
but other suitable scenarios may also trigger the problem.
Link: https://lkml.kernel.org/r/20241119060842.274072-1-liuye@kylinos.cn
Fixes: b2e18757f2 ("mm, vmscan: begin reclaiming pages on a per-node basis")
Signed-off-by: liuye <liuye@kylinos.cn>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Yang Shi <yang@os.amperecomputing.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If CONFIG_I2C=n:
WARNING: unmet direct dependencies detected for SND_SOC_AK4642
Depends on [n]: SOUND [=y] && SND [=y] && SND_SOC [=y] && I2C [=n]
Selected by [y]:
- SH_7724_SOLUTION_ENGINE [=y] && CPU_SUBTYPE_SH7724 [=y] && SND_SIMPLE_CARD [=y]
WARNING: unmet direct dependencies detected for SND_SOC_DA7210
Depends on [n]: SOUND [=y] && SND [=y] && SND_SOC [=y] && SND_SOC_I2C_AND_SPI [=n]
Selected by [y]:
- SH_ECOVEC [=y] && CPU_SUBTYPE_SH7724 [=y] && SND_SIMPLE_CARD [=y]
Fix this by replacing select by imply, instead of adding a dependency on
I2C.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501240836.OvXqmANX-lkp@intel.com/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Commit 654102df2a ("kbuild: add generic support for built-in
boot DTBs") introduced generic support for built-in DTBs.
Select GENERIC_BUILTIN_DTB when built-in DTB support is enabled.
To keep consistency across architectures, this commit also renames
CONFIG_USE_BUILTIN_DTB to CONFIG_BUILTIN_DTB, and
CONFIG_BUILTIN_DTB_SOURCE to CONFIG_BUILTIN_DTB_NAME.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
On a system with n CPUs and m interrupts, there will be n*m decimal
values yielded via seq_printf(.."%10u "..) which has significant costs
parsing format string and is less efficient than seq_put_decimal_ull_width().
Stress reading /proc/interrupts indicates ~30% performance improvement with
this patch.
Signed-off-by: David Wang <00107082@163.com>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Pull hexagon updates from Brian Cain:
- Move kernel prototypes out of uapi header to internal header
- Fix to address an unbalanced spinlock
- Miscellaneous patches to fix static checks
- Update bcain@quicinc.com->brian.cain@oss.qualcomm.com
* tag 'for-linus-hexagon-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/bcain/linux:
MAINTAINERS: Update my email address
hexagon: Fix unbalanced spinlock in die()
hexagon: Fix warning comparing pointer to 0
hexagon: Move kernel prototypes out of uapi/asm/setup.h header
hexagon: time: Remove redundant null check for resource
hexagon: fix using plain integer as NULL pointer warning in cmpxchg
Pull AT_EXECVE_CHECK selftest fix from Kees Cook:
"Fixes the AT_EXECVE_CHECK selftests which didn't run on old versions
of glibc"
* tag 'AT_EXECVE_CHECK-v6.14-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests: Handle old glibc without execveat(2)
Pull hardening fixes from Kees Cook:
"This is a fix for the soon to be released GCC 15 which has regressed
its initialization of unions when performing explicit initialization
(i.e. a general problem, not specifically a hardening problem; we're
just carrying the fix).
Details in the final patch, Acked by Masahiro, with updated selftests
to validate the fix"
* tag 'hardening-v6.14-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kbuild: Use -fzero-init-padding-bits=all
stackinit: Add union initialization to selftests
stackinit: Add old-style zero-init syntax to struct tests
Pull drm fixes from Dave Airlie:
"This is only AMD fixes:
amdgpu:
- GC 12 fix
- Aldebaran fix
- DCN 3.5 fix
- Freesync fix
amdkfd:
- Per queue reset fix
- MES fix"
* tag 'drm-next-2025-02-01' of https://gitlab.freedesktop.org/drm/kernel:
drm/amd/display: restore invalid MSA timing check for freesync
drm/amdkfd: only flush the validate MES contex
drm/amd/display: Correct register address in dcn35
drm/amd/pm: Mark MM activity as unsupported
drm/amd/amdgpu: change the config of cgcg on gfx12
drm/amdkfd: Block per-queue reset when halt_if_hws_hang=1
Pull pci fix from Bjorn Helgaas:
- Save the original INTX_DISABLE bit at the first pcim_intx() call and
restore that at devres cleanup instead of restoring the opposite of
the most recent enable/disable pcim_intx() argument, which was wrong
when a driver called pcim_intx() multiple times or with the already
enabled state (Takashi Iwai)
* tag 'pci-v6.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Restore original INTX_DISABLE bit by pcim_intx()
Pull RISC-V updates from Palmer Dabbelt:
- The PH1520 pinctrl and dwmac drivers are enabeled in defconfig
- A redundant AQRL barrier has been removed from the futex cmpxchg
implementation
- Support for the T-Head vector extensions, which includes exposing
these extensions to userspace on systems that implement them
- Some more page table information is now printed on die() and systems
that cause PA overflows
* tag 'riscv-for-linus-6.14-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: add a warning when physical memory address overflows
riscv/mm/fault: add show_pte() before die()
riscv: Add ghostwrite vulnerability
selftests: riscv: Support xtheadvector in vector tests
selftests: riscv: Fix vector tests
riscv: hwprobe: Document thead vendor extensions and xtheadvector extension
riscv: hwprobe: Add thead vendor extension probing
riscv: vector: Support xtheadvector save/restore
riscv: Add xtheadvector instruction definitions
riscv: csr: Add CSR encodings for CSR_VXRM/CSR_VXSAT
RISC-V: define the elements of the VCSR vector CSR
riscv: vector: Use vlenb from DT for thead
riscv: Add thead and xtheadvector as a vendor extension
riscv: dts: allwinner: Add xtheadvector to the D1/D1s devicetree
dt-bindings: cpus: add a thead vlen register length property
dt-bindings: riscv: Add xtheadvector ISA extension description
RISC-V: Mark riscv_v_init() as __init
riscv: defconfig: drop RT_GROUP_SCHED=y
riscv/futex: Optimize atomic cmpxchg
riscv: defconfig: enable pinctrl and dwmac support for TH1520
