The commit 842f4be958 ("KVM: VMX: Add a trampoline to fix VMREAD error
handling") removed the declaration of vmread_error() causes a W=1 build
failure with KVM_WERROR=y. Fix it by adding it back.
arch/x86/kvm/vmx/vmx.c:359:17: error: no previous prototype for 'vmread_error' [-Werror=missing-prototypes]
asmlinkage void vmread_error(unsigned long field, bool fault)
^~~~~~~~~~~~
Signed-off-by: Qian Cai <cai@lca.pw>
Message-Id: <20200402153955.1695-1-cai@lca.pw>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Take the target reg in __cpuid_entry_get_reg() instead of a pointer to a
struct cpuid_reg. When building with -fsanitize=alignment (enabled by
CONFIG_UBSAN=y), some versions of gcc get tripped up on the pointer and
trigger the BUILD_BUG().
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: d8577a4c23 ("KVM: x86: Do host CPUID at load time to mask KVM cpu caps")
Fixes: 4c61534aaa ("KVM: x86: Introduce cpuid_entry_{get,has}() accessors")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200325191259.23559-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a hand coded assembly trampoline to preserve volatile registers
across vmread_error(), and to handle the calling convention differences
between 64-bit and 32-bit due to asmlinkage on vmread_error(). Pass
@field and @fault on the stack when invoking the trampoline to avoid
clobbering volatile registers in the context of the inline assembly.
Calling vmread_error() directly from inline assembly is partially broken
on 64-bit, and completely broken on 32-bit. On 64-bit, it will clobber
%rdi and %rsi (used to pass @field and @fault) and any volatile regs
written by vmread_error(). On 32-bit, asmlinkage means vmread_error()
expects the parameters to be passed on the stack, not via regs.
Opportunistically zero out the result in the trampoline to save a few
bytes of code for every VMREAD. A happy side effect of the trampoline
is that the inline code footprint is reduced by three bytes on 64-bit
due to PUSH/POP being more efficent (in terms of opcode bytes) than MOV.
Fixes: 6e2020977e ("KVM: VMX: Add error handling to VMREAD helper")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200326160712.28803-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the __exit annotation from VMX hardware_unsetup(), the hook
can be reached during kvm_init() by way of kvm_arch_hardware_unsetup()
if failure occurs at various points during initialization.
Removing the annotation also lets us annotate vmx_x86_ops and svm_x86_ops
with __initdata; otherwise, objtool complains because it doesn't
understand that the vendor specific __initdata is being copied by value
to a non-__initdata instance.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321202603.19355-8-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the kvm_x86_ops pointer in common x86 with an instance of the
struct to save one pointer dereference when invoking functions. Copy the
struct by value to set the ops during kvm_init().
Arbitrarily use kvm_x86_ops.hardware_enable to track whether or not the
ops have been initialized, i.e. a vendor KVM module has been loaded.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321202603.19355-7-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set kvm_x86_ops with the vendor's ops only after ->hardware_setup()
completes to "prevent" using kvm_x86_ops before they are ready, i.e. to
generate a null pointer fault instead of silently consuming unconfigured
state.
An alternative implementation would be to have ->hardware_setup()
return the vendor's ops, but that would require non-trivial refactoring,
and would arguably result in less readable code, e.g. ->hardware_setup()
would need to use ERR_PTR() in multiple locations, and each vendor's
declaration of the runtime ops would be less obvious.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321202603.19355-6-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the kvm_x86_ops functions that are used only within the scope of
kvm_init() into a separate struct, kvm_x86_init_ops. In addition to
identifying the init-only functions without restorting to code comments,
this also sets the stage for waiting until after ->hardware_setup() to
set kvm_x86_ops. Setting kvm_x86_ops after ->hardware_setup() is
desirable as many of the hooks are not usable until ->hardware_setup()
completes.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321202603.19355-3-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pass @opaque to kvm_arch_hardware_setup() and
kvm_arch_check_processor_compat() to allow architecture specific code to
reference @opaque without having to stash it away in a temporary global
variable. This will enable x86 to separate its vendor specific callback
ops, which are passed via @opaque, into "init" and "runtime" ops without
having to stash away the "init" ops.
No functional change intended.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Cornelia Huck <cohuck@redhat.com> #s390
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321202603.19355-2-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM PPC update for 5.7
* Add a capability for enabling secure guests under the Protected
Execution Framework ultravisor
* Various bug fixes and cleanups.
If a signal is pending we might return -ENOMEM instead of -EINTR.
We should propagate the proper error during KSM unsharing.
unmerge_ksm_pages returns -ERESTARTSYS on signal_pending. This gets
translated by entry.S to -EINTR. It is important to get this error
code so that userspace can retry.
To make this clearer we also add -EINTR to the documentation of the
PV_ENABLE call, which calls unmerge_ksm_pages.
Fixes: 3ac8e38015 ("s390/mm: disable KSM for storage key enabled pages")
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reset the LRU slot if it becomes invalid when deleting a memslot to fix
an out-of-bounds/use-after-free access when searching through memslots.
Explicitly check for there being no used slots in search_memslots(), and
in the caller of s390's approximation variant.
Fixes: 36947254e5 ("KVM: Dynamically size memslot array based on number of used slots")
Reported-by: Qian Cai <cai@lca.pw>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320205546.2396-2-sean.j.christopherson@intel.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
At present, on Power systems with Protected Execution Facility
hardware and an ultravisor, a KVM guest can transition to being a
secure guest at will. Userspace (QEMU) has no way of knowing
whether a host system is capable of running secure guests. This
will present a problem in future when the ultravisor is capable of
migrating secure guests from one host to another, because
virtualization management software will have no way to ensure that
secure guests only run in domains where all of the hosts can
support secure guests.
This adds a VM capability which has two functions: (a) userspace
can query it to find out whether the host can support secure guests,
and (b) userspace can enable it for a guest, which allows that
guest to become a secure guest. If userspace does not enable it,
KVM will return an error when the ultravisor does the hypercall
that indicates that the guest is starting to transition to a
secure guest. The ultravisor will then abort the transition and
the guest will terminate.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Ram Pai <linuxram@us.ibm.com>
Each time a Group-enable bit gets flipped, the state of these bits
needs to be forwarded to the hardware. This is a pretty heavy
handed operation, requiring all vcpus to reload their GICv4
configuration. It is thus implemented as a new request type.
These enable bits are programmed into the HW by setting the VGrp{0,1}En
fields of GICR_VPENDBASER when the vPEs are made resident again.
Of course, we only support Group-1 for now...
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-22-maz@kernel.org
The GICv4.1 architecture gives the hypervisor the option to let
the guest choose whether it wants the good old SGIs with an
active state, or the new, HW-based ones that do not have one.
For this, plumb the configuration of SGIs into the GICv3 MMIO
handling, present the GICD_TYPER2.nASSGIcap to the guest,
and handle the GICD_CTLR.nASSGIreq setting.
In order to be able to deal with the restore of a guest, also
apply the GICD_CTLR.nASSGIreq setting at first run so that we
can move the restored SGIs to the HW if that's what the guest
had selected in a previous life.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-21-maz@kernel.org
In order to let a guest buy in the new, active-less SGIs, we
need to be able to switch between the two modes.
Handle this by stopping all guest activity, transfer the state
from one mode to the other, and resume the guest. Nothing calls
this code so far, but a later patch will plug it into the MMIO
emulation.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-20-maz@kernel.org
In order to hide some of the differences between v4.0 and v4.1, move
the doorbell management out of the KVM code, and into the GICv4-specific
layer. This allows the calling code to ask for the doorbell when blocking,
and otherwise to leave the doorbell permanently disabled.
This matches the v4.1 code perfectly, and only results in a minor
refactoring of the v4.0 code.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-14-maz@kernel.org
Just like for vLPIs, there is some configuration information that cannot
be directly communicated through the normal irqchip API, and we have to
use our good old friend set_vcpu_affinity as a side-band communication
mechanism.
This is used to configure group and priority for a given vSGI.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-13-maz@kernel.org
To implement the get/set_irqchip_state callbacks (limited to the
PENDING state), we have to use a particular set of hacks:
- Reading the pending state is done by using a pair of new redistributor
registers (GICR_VSGIR, GICR_VSGIPENDR), which allow the 16 interrupts
state to be retrieved.
- Setting the pending state is done by generating it as we'd otherwise do
for a guest (writing to GITS_SGIR).
- Clearing the pending state is done by emitting a VSGI command with the
"clear" bit set.
This requires some interesting locking though:
- When talking to the redistributor, we must make sure that the VPE
affinity doesn't change, hence taking the VPE lock.
- At the same time, we must ensure that nobody accesses the same
redistributor's GICR_VSGIR registers for a different VPE, which
would corrupt the reading of the pending bits. We thus take the
per-RD spinlock. Much fun.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-12-maz@kernel.org
The GICv4.1 ITS has yet another new command (VSGI) which allows
a VPE-targeted SGI to be configured (or have its pending state
cleared). Add support for this command and plumb it into the
activate irqdomain callback so that it is ready to be used.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-10-maz@kernel.org
Since GICv4.1 has the capability to inject 16 SGIs into each VPE,
and that I'm keen not to invent too many specific interfaces to
manipulate these interrupts, let's pretend that each of these SGIs
is an actual Linux interrupt.
For that matter, let's introduce a minimal irqchip and irqdomain
setup that will get fleshed up in the following patches.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-9-maz@kernel.org
Although we have to bounce between HYP and SVC to decompress and
relocate the kernel, we don't need to be able to use it in the
kernel itself. So let's drop the functionnality.
Since the vectors are never changed, there is no need to reset them
either, and nobody calls that stub anyway. The last function
(SOFT_RESTART) is still present in order to support kexec.
Signed-off-by: Marc Zyngier <maz@kernel.org>
When the call to UV_REGISTER_MEM_SLOT is failing, for instance because
there is not enough free secured memory, the Hypervisor (HV) has to call
UV_RETURN to report the error to the Ultravisor (UV). Then the UV will call
H_SVM_INIT_ABORT to abort the securing phase and go back to the calling VM.
If the kvm->arch.secure_guest is not set, in the return path rfid is called
but there is no valid context to get back to the SVM since the Hcall has
been routed by the Ultravisor.
Move the setting of kvm->arch.secure_guest earlier in
kvmppc_h_svm_init_start() so in the return path, UV_RETURN will be called
instead of rfid.
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Ram Pai <linuxram@us.ibm.com>
Tested-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The Hcall named H_SVM_* are reserved to the Ultravisor. However, nothing
prevent a malicious VM or SVM to call them. This could lead to weird result
and should be filtered out.
Checking the Secure bit of the calling MSR ensure that the call is coming
from either the Ultravisor or a SVM. But any system call made from a SVM
are going through the Ultravisor, and the Ultravisor should filter out
these malicious call. This way, only the Ultravisor is able to make such a
Hcall.
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Ram Pai <linuxram@us.ibnm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
