The handling for variable-length ioctl commands in hidraw_ioctl() is
rather complex and the check for the data direction is incomplete.
Simplify this code by factoring out the various ioctls grouped by dir
and size, and using a switch() statement with the size masked out, to
ensure the rest of the command is correctly matched.
Fixes: 9188e79ec3 ("HID: add phys and name ioctls to hidraw")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Returning buffers via a ring is performant and convenient, but it
becomes a problem when/if the user misconfigured the ring size and it
becomes full. Add a synchronous way to return buffers back to the page
pool via a new register opcode. It's supposed to be a reliable slow
path for refilling.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
During the connection establishment, a peer can tell the other one that
it cannot establish new subflows to the initial IP address and port by
setting the 'C' flag [1]. Doing so makes sense when the sender is behind
a strict NAT, operating behind a legacy Layer 4 load balancer, or using
anycast IP address for example.
When this 'C' flag is set, the path-managers must then not try to
establish new subflows to the other peer's initial IP address and port.
The in-kernel PM has access to this info, but the userspace PM didn't.
The RFC8684 [1] is strict about that:
(...) therefore the receiver MUST NOT try to open any additional
subflows toward this address and port.
So it is important to tell the userspace about that as it is responsible
for the respect of this flag.
When a new connection is created and established, the Netlink events
now contain the existing but not currently used 'flags' attribute. When
MPTCP_PM_EV_FLAG_DENY_JOIN_ID0 is set, it means no other subflows
to the initial IP address and port -- info that are also part of the
event -- can be established.
Link: https://datatracker.ietf.org/doc/html/rfc8684#section-3.1-20.6 [1]
Fixes: 702c2f646d ("mptcp: netlink: allow userspace-driven subflow establishment")
Reported-by: Marek Majkowski <marek@cloudflare.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/532
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-pm-uspace-deny_join_id0-v1-2-40171884ade8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce qcomtee_object, which represents an object in both QTEE and
the kernel. QTEE clients can invoke an instance of qcomtee_object to
access QTEE services. If this invocation produces a new object in QTEE,
an instance of qcomtee_object will be returned.
Similarly, QTEE can request services from by issuing a callback
request, which invokes an instance of qcomtee_object.
Implement initial support for exporting qcomtee_object to userspace
and QTEE, enabling the invocation of objects hosted in QTEE and userspace
through the TEE subsystem.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Harshal Dev <quic_hdev@quicinc.com>
Acked-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Increase TEE_MAX_ARG_SIZE to accommodate worst-case scenarios where
additional buffer space is required to pass all arguments to TEE.
This change is necessary for upcoming support for Qualcomm TEE, which
requires a larger buffer for argument marshaling.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Tested-by: Harshal Dev <quic_hdev@quicinc.com>
Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
The TEE subsystem allows session-based access to trusted services,
requiring a session to be established to receive a service. This
is not suitable for an environment that represents services as objects.
An object supports various operations that a client can invoke,
potentially generating a result or a new object that can be invoked
independently of the original object.
Add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF_INPUT/OUTPUT/INOUT to represent an
object. Objects may reside in either TEE or userspace. To invoke an
object in TEE, introduce a new ioctl. Use the existing SUPPL_RECV and
SUPPL_SEND to invoke an object in userspace.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Harshal Dev <quic_hdev@quicinc.com>
Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
For drivers that can transfer data to the TEE without using shared
memory from client, it is necessary to receive the user address
directly, bypassing any processing by the TEE subsystem. Introduce
TEE_IOCTL_PARAM_ATTR_TYPE_UBUF_INPUT/OUTPUT/INOUT to represent
userspace buffers.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Harshal Dev <quic_hdev@quicinc.com>
Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
TEE protected DMA-bufs for v6.18
- Allocates protected DMA-bufs from a DMA-heap instantiated from the TEE
subsystem.
- The DMA-heap uses a protected memory pool provided by the backend TEE
driver, allowing it to choose how to allocate the protected physical
memory.
- Three use-cases (Secure Video Playback, Trusted UI, and Secure Video
Recording) have been identified so far to serve as examples of what
can be expected.
- The use-cases have predefined DMA-heap names,
"protected,secure-video", "protected,trusted-ui", and
"protected,secure-video-record". The backend driver registers protected
memory pools for the use-cases it supports.
* tag 'tee-prot-dma-buf-for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
optee: smc abi: dynamic protected memory allocation
optee: FF-A: dynamic protected memory allocation
optee: support protected memory allocation
tee: add tee_shm_alloc_dma_mem()
tee: new ioctl to a register tee_shm from a dmabuf file descriptor
tee: refactor params_from_user()
tee: implement protected DMA-heap
dma-buf: dma-heap: export declared functions
optee: sync secure world ABI headers
Link: https://lore.kernel.org/r/20250912101752.GA1453408@rayden
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Currently, the kexec_file_load syscall on x86 does not support passing a
device tree blob to the new kernel. Some embedded x86 systems use device
trees. On these systems, failing to pass a device tree to the new kernel
causes a boot failure.
To add support for this, we copy the behavior of ARM64 and PowerPC and
copy the current boot's device tree blob for use in the new kernel. We do
this on x86 by passing the device tree blob as a setup_data entry in
accordance with the x86 boot protocol.
This behavior is gated behind the KEXEC_FILE_FORCE_DTB flag.
Link: https://lkml.kernel.org/r/20250805211527.122367-3-makb@juniper.net
Signed-off-by: Brian Mak <makb@juniper.net>
Cc: Alexander Graf <graf@amazon.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Dave Young <dyoung@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "prctl: extend PR_SET_THP_DISABLE to only provide THPs when
advised", v5.
This will allow individual processes to opt-out of THP = "always" into THP
= "madvise", without affecting other workloads on the system. This has
been extensively discussed on the mailing list and has been summarized
very well by David in the first patch which also includes the links to
alternatives, please refer to the first patch commit message for the
motivation for this series.
Patch 1 adds the PR_THP_DISABLE_EXCEPT_ADVISED flag to implement this,
along with the MMF changes.
Patch 2 is a cleanup patch for tva_flags that will allow the forced
collapse case to be transmitted to vma_thp_disabled (which is done in
patch 3).
Patch 4 adds documentation for PR_SET_THP_DISABLE/PR_GET_THP_DISABLE.
Patches 6-7 implement the selftests for PR_SET_THP_DISABLE for completely
disabling THPs (old behaviour) and only enabling it at advise
(PR_THP_DISABLE_EXCEPT_ADVISED).
This patch (of 7):
People want to make use of more THPs, for example, moving from the "never"
system policy to "madvise", or from "madvise" to "always".
While this is great news for every THP desperately waiting to get
allocated out there, apparently there are some workloads that require a
bit of care during that transition: individual processes may need to
opt-out from this behavior for various reasons, and this should be
permitted without needing to make all other workloads on the system
similarly opt-out.
The following scenarios are imaginable:
(1) Switch from "none" system policy to "madvise"/"always", but keep THPs
disabled for selected workloads.
(2) Stay at "none" system policy, but enable THPs for selected
workloads, making only these workloads use the "madvise" or "always"
policy.
(3) Switch from "madvise" system policy to "always", but keep the
"madvise" policy for selected workloads: allocate THPs only when
advised.
(4) Stay at "madvise" system policy, but enable THPs even when not advised
for selected workloads -- "always" policy.
Once can emulate (2) through (1), by setting the system policy to
"madvise"/"always" while disabling THPs for all processes that don't want
THPs. It requires configuring all workloads, but that is a user-space
problem to sort out.
(4) can be emulated through (3) in a similar way.
Back when (1) was relevant in the past, as people started enabling THPs,
we added PR_SET_THP_DISABLE, so relevant workloads that were not ready yet
(i.e., used by Redis) were able to just disable THPs completely. Redis
still implements the option to use this interface to disable THPs
completely.
With PR_SET_THP_DISABLE, we added a way to force-disable THPs for a
workload -- a process, including fork+exec'ed process hierarchy. That
essentially made us support (1): simply disable THPs for all workloads
that are not ready for THPs yet, while still enabling THPs system-wide.
The quest for handling (3) and (4) started, but current approaches
(completely new prctl, options to set other policies per process,
alternatives to prctl -- mctrl, cgroup handling) don't look particularly
promising. Likely, the future will use bpf or something similar to
implement better policies, in particular to also make better decisions
about THP sizes to use, but this will certainly take a while as that work
just started.
Long story short: a simple enable/disable is not really suitable for the
future, so we're not willing to add completely new toggles.
While we could emulate (3)+(4) through (1)+(2) by simply disabling THPs
completely for these processes, this is a step backwards, because these
processes can no longer allocate THPs in regions where THPs were
explicitly advised: regions flagged as VM_HUGEPAGE. Apparently, that
imposes a problem for relevant workloads, because "not THPs" is certainly
worse than "THPs only when advised".
Could we simply relax PR_SET_THP_DISABLE, to "disable THPs unless not
explicitly advised by the app through MAD_HUGEPAGE"? *maybe*, but this
would change the documented semantics quite a bit, and the versatility to
use it for debugging purposes, so I am not 100% sure that is what we want
-- although it would certainly be much easier.
So instead, as an easy way forward for (3) and (4), add an option to
make PR_SET_THP_DISABLE disable *less* THPs for a process.
In essence, this patch:
(A) Adds PR_THP_DISABLE_EXCEPT_ADVISED, to be used as a flag in arg3
of prctl(PR_SET_THP_DISABLE) when disabling THPs (arg2 != 0).
prctl(PR_SET_THP_DISABLE, 1, PR_THP_DISABLE_EXCEPT_ADVISED).
(B) Makes prctl(PR_GET_THP_DISABLE) return 3 if
PR_THP_DISABLE_EXCEPT_ADVISED was set while disabling.
Previously, it would return 1 if THPs were disabled completely. Now
it returns the set flags as well: 3 if PR_THP_DISABLE_EXCEPT_ADVISED
was set.
(C) Renames MMF_DISABLE_THP to MMF_DISABLE_THP_COMPLETELY, to express
the semantics clearly.
Fortunately, there are only two instances outside of prctl() code.
(D) Adds MMF_DISABLE_THP_EXCEPT_ADVISED to express "no THP except for VMAs
with VM_HUGEPAGE" -- essentially "thp=madvise" behavior
Fortunately, we only have to extend vma_thp_disabled().
(E) Indicates "THP_enabled: 0" in /proc/pid/status only if THPs are
disabled completely
Only indicating that THPs are disabled when they are really disabled
completely, not only partially.
For now, we don't add another interface to obtained whether THPs
are disabled partially (PR_THP_DISABLE_EXCEPT_ADVISED was set). If
ever required, we could add a new entry.
The documented semantics in the man page for PR_SET_THP_DISABLE "is
inherited by a child created via fork(2) and is preserved across
execve(2)" is maintained. This behavior, for example, allows for
disabling THPs for a workload through the launching process (e.g., systemd
where we fork() a helper process to then exec()).
For now, MADV_COLLAPSE will *fail* in regions without VM_HUGEPAGE and
VM_NOHUGEPAGE. As MADV_COLLAPSE is a clear advise that user space thinks
a THP is a good idea, we'll enable that separately next (requiring a bit
of cleanup first).
There is currently not way to prevent that a process will not issue
PR_SET_THP_DISABLE itself to re-enable THP. There are not really known
users for re-enabling it, and it's against the purpose of the original
interface. So if ever required, we could investigate just forbidding to
re-enable them, or make this somehow configurable.
Link: https://lkml.kernel.org/r/20250815135549.130506-1-usamaarif642@gmail.com
Link: https://lkml.kernel.org/r/20250815135549.130506-2-usamaarif642@gmail.com
Acked-by: Zi Yan <ziy@nvidia.com>
Acked-by: Usama Arif <usamaarif642@gmail.com>
Tested-by: Usama Arif <usamaarif642@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yafang <laoar.shao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add new IIO modifiers to support power and energy measurement devices:
Power modifiers:
- IIO_MOD_ACTIVE: Real power consumed by the load
- IIO_MOD_REACTIVE: Power that oscillates between source and load
- IIO_MOD_APPARENT: Magnitude of complex power
Signal quality modifiers:
- IIO_MOD_RMS: Root Mean Square value
Additionally adds:
- IIO_CHAN_INFO_POWERFACTOR: Power factor channel info type for
representing the ratio of active power to apparent power
These modifiers enable proper representation of power measurement
devices like energy meters and power analyzers.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for IIO_ALTCURRENT channel type to distinguish AC current
measurements from DC current measurements. This follows the same pattern
as IIO_VOLTAGE and IIO_ALTVOLTAGE.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Florian Westphal says:
====================
netfilter: updates for net-next
1) Don't respond to ICMP_UNREACH errors with another ICMP_UNREACH
error.
2) Support fetching the current bridge ethernet address.
This allows a more flexible approach to packet redirection
on bridges without need to use hardcoded addresses. From
Fernando Fernandez Mancera.
3) Zap a few no-longer needed conditionals from ipvs packet path
and convert to READ/WRITE_ONCE to avoid KCSAN warnings.
From Zhang Tengfei.
4) Remove a no-longer-used macro argument in ipset, from Zhen Ni.
* tag 'nf-next-25-09-11' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_reject: don't reply to icmp error messages
ipvs: Use READ_ONCE/WRITE_ONCE for ipvs->enable
netfilter: nft_meta_bridge: introduce NFT_META_BRI_IIFHWADDR support
netfilter: ipset: Remove unused htable_bits in macro ahash_region
selftest:net: fixed spelling mistakes
====================
Link: https://patch.msgid.link/20250911143819.14753-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Johannes Berg says:
====================
Plenty of things going on, notably:
- iwlwifi: major cleanups/rework
- brcmfmac: gets AP isolation support
- mac80211: gets more S1G support
* tag 'wireless-next-2025-09-11' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (94 commits)
wifi: mwifiex: fix endianness handling in mwifiex_send_rgpower_table
wifi: cfg80211: Remove the redundant wiphy_dev
wifi: mac80211: fix incorrect comment
wifi: cfg80211: update the time stamps in hidden ssid
wifi: mac80211: Fix HE capabilities element check
wifi: mac80211: add tx_handlers_drop statistics to ethtool
wifi: mac80211: fix reporting of all valid links in sta_set_sinfo()
wifi: iwlwifi: mld: CHANNEL_SURVEY_NOTIF is always supported
wifi: iwlwifi: mld: remove support of iwl_esr_mode_notif version 1
wifi: iwlwifi: mld: remove support from of sta cmd version 1
wifi: iwlwifi: mld: remove support of roc cmd version 5
wifi: iwlwifi: mld: remove support of mac cmd ver 2
wifi: iwlwifi: mld: don't consider phy cmd version 5
wifi: iwlwifi: implement wowlan status notification API update
wifi: iwlwifi: fw: Add ASUS to PPAG and TAS list
wifi: iwlwifi: add kunit tests for nvm parse
wifi: iwlwifi: api: add a flag to iwl_link_ctx_modify_flags
wifi: iwlwifi: pcie: move ltr_enabled to the specific transport
wifi: iwlwifi: pcie: move pm_support to the specific transport
wifi: iwlwifi: rename iwl_finish_nic_init
...
====================
Link: https://patch.msgid.link/20250911100854.20445-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Expose the input bridge interface ethernet address so it can be used to
redirect the packet to the receiving physical device for processing.
Tested with nft command line tool.
table bridge nat {
chain PREROUTING {
type filter hook prerouting priority 0; policy accept;
ether daddr de:ad:00:00:be:ef meta pkttype set host ether daddr set meta ibrhwdr accept
}
}
Joint work with Pablo Neira.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Add a userspace API to create a tee_shm object that refers to a dmabuf
reference.
Userspace registers the dmabuf file descriptor as in a tee_shm object.
The registration is completed with a tee_shm returned file descriptor.
Userspace is free to close the dmabuf file descriptor after it has been
registered since all the resources are now held via the new tee_shm
object.
Closing the tee_shm file descriptor will eventually release all
resources used by the tee_shm object when all references are released.
The new IOCTL, TEE_IOC_SHM_REGISTER_FD, supports dmabuf references to
physically contiguous memory buffers. Dmabuf references acquired from
the TEE DMA-heap can be used as protected memory for Secure Video Path
and such use cases. It depends on the TEE and the TEE driver if dmabuf
references acquired by other means can be used.
A new tee_shm flag is added to identify tee_shm objects built from a
registered dmabuf, TEE_SHM_DMA_BUF.
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Olivier Masse <olivier.masse@nxp.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Add a new GEM domain bit AMDGPU_GEM_DOMAIN_MMIO_REMAP to allow
userspace to request the MMIO remap (HDP flush) page via GEM_CREATE.
- include/uapi/drm/amdgpu_drm.h:
* define AMDGPU_GEM_DOMAIN_MMIO_REMAP
* include the bit in AMDGPU_GEM_DOMAIN_MASK
v2: Add early reject in amdgpu_gem_create_ioctl() (Alex).
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduce a new netlink attribute 'actor_port_prio' to allow setting
the LACP actor port priority on a per-slave basis. This extends the
existing bonding infrastructure to support more granular control over
LACP negotiations.
The priority value is embedded in LACPDU packets and will be used by
subsequent patches to influence aggregator selection policies.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250902064501.360822-2-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce two new ioctl commands, PTP_SYS_OFFSET_PRECISE_CYCLES and
PTP_SYS_OFFSET_EXTENDED_CYCLES, to allow user space to access the
raw free-running cycle counter from PTP devices.
These ioctls are variants of the existing PRECISE and EXTENDED
offset queries, but instead of returning device time in realtime,
they return the raw cycle counter value.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://patch.msgid.link/1755008228-88881-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There are many parameters users might want to query about io_uring like
available request types or the ring sizes. This patch introduces an
interface for such slow path queries.
It was written with several requirements in mind:
- Can be used with or without an io_uring instance. Asking for supported
setup flags before creating an instance as well as qeurying info about
an already created ring are valid use cases.
- Should be moderately fast. For example, users might use it to
periodically retrieve ring attributes at runtime. As a consequence,
it should be able to query multiple attributes in a single syscall.
- Backward and forward compatible.
- Should be reasobably easy to use.
- Reduce the kernel code size for introducing new query types.
It's implemented as a new registration opcode IORING_REGISTER_QUERY.
The user passes one or more query strutctures linked together, each
represented by struct io_uring_query_hdr. The header stores common
control fields needed for processing and points to query type specific
information.
The header contains
- The query type
- The result field, which on return contains the error code for the query
- Pointer to the query type specific information
- The size of the query structure. The kernel will only populate up to
the size, which helps with backward compatibility. The kernel can also
reduce the size, so if the current kernel is older than the inteface
the user tries to use, it'll get only the supported bits.
- next_entry field is used to chain multiple queries.
Apart from common registeration syscall failures, it can only immediately
return an error code in case when the headers are incorrect or any
other addresses and invalid. That usually mean that the userspace
doesn't use the API right and should be corrected. All query type
specific errors are returned in the header's result field.
As an example, the patch adds a single query type for now, i.e.
IO_URING_QUERY_OPCODES, which tells what register / request / etc.
opcodes are supported, but there are particular plans to extend it.
Note: there is a request probing interface via IORING_REGISTER_PROBE,
but it's a mess. It requires the user to create a ring first, it only
works for requests, and requires dynamic allocations.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The previous patch introduced the internal infrastructure for handling
64-bit timestamps. This patch exposes this capability to user-space.
Define the new ioctl command SNDRV_COMPRESS_TSTAMP64, which allows
applications to fetch the overflow-safe struct snd_compr_tstamp64.
The ioctl dispatch table is updated to handle the new command by
calling a new snd_compr_tstamp64 handler, while the legacy path is
renamed to snd_compr_tstamp32 for clarity.
This patch bumps the SNDRV_COMPRESS_VERSION to 0.4.0.
Reviewed-by: Miller Liang <millerliang@google.com>
Tested-by: Joris Verhaegen <verhaegen@google.com>
Signed-off-by: Joris Verhaegen <verhaegen@google.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250905091301.2711705-3-verhaegen@google.com
The copied_total field in struct snd_compr_tstamp is a 32-bit
value that can overflow on long-running high-bitrate streams,
leading to incorrect calculations for buffer availablility.
This patch adds a 64-bit safe timestamping mechanism.
A new UAPI struct, snd_compr_tstamp64, is added which uses 64-bit
types for byte counters. The relevant ops structures across the
ASoC and core compress code are updated to use this new struct.
ASoC drivers are updated to use u64 counters.
Internal timestamps being u64 now, a compatibility function is added
to convert the 64-bit timestamp back to the 32-bit format for legacy
ioctl callers.
Reviewed-by: Miller Liang <millerliang@google.com>
Tested-by: Joris Verhaegen <verhaegen@google.com>
Signed-off-by: Joris Verhaegen <verhaegen@google.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250905091301.2711705-2-verhaegen@google.com
The new version of the hisilicon zip driver supports the hash join
and gather features, as well as the data move feature (UDMA),
including data copying and memory initialization functions.These
features are registered to the uacce subsystem.
Signed-off-by: Zhushuai Yin <yinzhushuai@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some fuse servers need to prune their caches, which can only be done if the
kernel's own dentry/inode caches are pruned first to avoid dangling
references.
Add FUSE_NOTIFY_PRUNE, which takes an array of node ID's to try and get rid
of. Inodes with active references are skipped.
A similar functionality is already provided by FUSE_NOTIFY_INVAL_ENTRY with
the FUSE_EXPIRE_ONLY flag. Differences in the interface are
FUSE_NOTIFY_INVAL_ENTRY:
- can only prune one dentry
- dentry is determined by parent ID and name
- if inode has multiple aliases (cached hard links), then they would have
to be invalidated individually to be able to get rid of the inode
FUSE_NOTIFY_PRUNE:
- can prune multiple inodes
- inodes determined by their node ID
- aliases are taken care of automatically
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Constants that change value from version to version have no place in an
interface definition.
Hopefully this won't break anything.
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When reporting an error, the AER driver prints the TLP Header / Prefix Log
only for errors enumerated in the AER_LOG_TLP_MASKS macro.
The macro was never amended since its introduction in 2006 with commit
6c2b374d74 ("PCI-Express AER implemetation: AER core and aerdriver").
At the time, PCIe r1.1 was the latest spec revision.
Amend the macro with errors defined since then to avoid omitting the TLP
Header / Prefix Log for newer errors.
The order of the errors in AER_LOG_TLP_MASKS follows PCIe r1.1 sec 6.2.7
rather than 7.10.2, because only the former documents for which errors a
TLP Header / Prefix is logged. Retain this order. The section number is
still 6.2.7 in today's PCIe r7.0.
For Completion Timeouts, the TLP Header / Prefix is only logged if the
Completion Timeout Prefix / Header Log Capable bit is set in the AER
Capabilities and Control register. Introduce a tlp_header_logged() helper
to check whether the TLP Header / Prefix Log is populated and use it in
the two places which currently match against AER_LOG_TLP_MASKS directly.
For Uncorrectable Internal Errors, logging of the TLP Header / Prefix is
optional per PCIe r7.0 sec 6.2.7. If needed, drivers could indicate
through a flag whether devices are capable and tlp_header_logged() could
then check that flag.
pcitools introduced macros for newer errors with commit 144b0911cc0b
("ls-ecaps: extend decode support for more fields for AER CE and UE
status"):
https://git.kernel.org/pub/scm/utils/pciutils/pciutils.git/commit/?id=144b0911cc0b
Unfortunately some of those macros are overly long:
PCI_ERR_UNC_POISONED_TLP_EGRESS
PCI_ERR_UNC_DMWR_REQ_EGRESS_BLOCKED
PCI_ERR_UNC_IDE_CHECK
PCI_ERR_UNC_MISR_IDE_TLP
PCI_ERR_UNC_PCRC_CHECK
PCI_ERR_UNC_TLP_XLAT_EGRESS_BLOCKED
This seems unsuitable for <linux/pci_regs.h>, so shorten to:
PCI_ERR_UNC_POISON_BLK
PCI_ERR_UNC_DMWR_BLK
PCI_ERR_UNC_IDE_CHECK
PCI_ERR_UNC_MISR_IDE
PCI_ERR_UNC_PCRC_CHECK
PCI_ERR_UNC_XLAT_BLK
Note that some of the existing macros in <linux/pci_regs.h> do not match
exactly with pcitools (e.g. PCI_ERR_UNC_SDES versus PCI_ERR_UNC_SURPDN),
so it does not seem mandatory for them to be identical.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/5f707caf1260bd8f15012bb032f7da9a9b898aba.1756712066.git.lukas@wunner.de
The so-called fullmac devices rely on firmware functionality and/or API to
change BSS parameters. Today there are limited drivers supporting the
nl80211 primitive, but they only handle a subset of the bss parameters
passed if any. The mac80211 driver does handle all parameters and stores
their configured values. Some of the BSS parameters were already conditional
by wiphy->features. For these the wiphy->bss_param_support and wiphy->features
fields are silently aligned in wiphy_register(). Maybe better to issue a warning
instead when they are misaligned.
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250817190435.1495094-2-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
An S1G TIM PVB is encoded differently compared to a non-s1g TIM PVB.
As the AP dictates which encoding mode it uses, here we only implement
block bitmap encoding. This is the default encoding mode used by
all current vendor implementations.
Additionally, S1G has a maximum AID count of 8192, however we are
limiting the current implementation to 1600. This has no resemblence
to the standard and is purely an implementation detail. The reason for
this is due to the TIM elements maximum length of 255. This allows for,
at most, 25 encoded blocks for a PVB encoded with block bitmap. Support
for the maximum of 8192 AIDs will require an implementation of page slicing
to be added to mac80211.
As a result, we perform extra validation on both the STA and AP side
when receiving an AID as an S1G interface.
Add support for block bitmap encoding for an S1G AP and limit the
maximum AID count to 1600 for the current mac80211 implementations.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250725132221.258217-2-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
