- Support for Logitech G Pro X Superlight 2 receiver (Nathan Rossi)
- Fix for retry logic in hidpp_send_message_sync() (Mavroudis Chatzilazaridis)
- Support for new Lighspeed receiver version (Mavroudis Chatzilazaridis)
- Support for Logitech G13 (Leo L. Schwab)
- Backlight support improvement for Logitech G510 (Hans de Goede)
The scroll resolution multipliers are set in the context of
hidinput_connect(), which is only called at probe time: when the host
changes the value on the device with a SET_REPORT(FEATURE), and the device
accepts it, these multipliers are stored on the host side, and used to
calculate the final scroll event values sent to userspace.
After a USB suspend, the resume operation on many hubs and chipsets
involve a USB reset signal as well. A reset on the device side clears all
previous state information, including the value of the multiplier report.
This reset is not handled by the multiplier handling logic, so what ends up
happening is the host is still expecting high-resolution scroll events,
but the device is reset to default resolution, making the effective,
user-perceived scroll speed incredibly slow.
The solution is to renegotiate the multiplier selection after each reset.
This is not the only bug related to the high-resolution scrolling
implementation in the kernel (the other one is
https://bugzilla.kernel.org/show_bug.cgi?id=220144), but for this one,
there is no device side workaround for, leading to poor user experience with our product:
https://github.com/UltimateHackingKeyboard/firmware/issues/1155https://github.com/UltimateHackingKeyboard/firmware/issues/1261https://github.com/UltimateHackingKeyboard/firmware/pull/1355
This patch was tested by an affected user and has been reported to
fix the issue (see discussion in 1355).
Signed-off-by: Benedek Kupper <kupper.benedek@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The mouse portion of the device's Report Descriptor declares 5 buttons but only
declares 3 usages (Button 1 through Button 3). As a result events for the 2
side buttons are not generated.
Detect and repair the Report Descriptor if necessary by changing the Usage
Maximum value from Button 3 to Button 5.
[jkosina@suse.com: standardize changelog a little bit]
Reported-by: Artem <temabiill@gmail.com>
Closes: https://lore.kernel.org/all/CADYkRmrfhRf6VmQjc+su+mepyv=TsHc+aMcL6ryRZ5HTZ8pyFg@mail.gmail.com/
Signed-off-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Tested-by: Artem <temabiill@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Since commit 6f20d32612 ("HID: logitech-dj: Fix error handling in
logi_dj_recv_switch_to_dj_mode()") logi_dj_recv_switch_to_dj_mode()
will return an error when the hid_hw_raw_request() call to enable
[dis]connect events fails.
This can happen when used with a KVM like the Aten CS1784a and the PC
does not have the KVM focus when probe() runs, which causes probe() to
fail after which the receiver will simply not work.
The logi_dj_recv_query_paired_devices() call done at the end of probe()
already ignores any errors for the KVM without focus case. When focus is
restored and an input report is received this will trigger
logi_dj_recv_queue_unknown_work() which retries the query_paired_devices()
call from a workqueue.
To fix the probe() failure let it ignore logi_dj_recv_switch_to_dj_mode()
errors too, track if a successful logi_dj_recv_switch_to_dj_mode() was
done and retry if necessary from logi_dj_recv_queue_unknown_work().
Queurying paired devices while not in dj-mode is not useful and this
will be redone after the unknown work has retried setting dj-mode,
so skip queurying paired devices when not in dj-mode yet.
The new bool to track successful setting of the dj-mode will also cause
setting dj-mode to be retried from the unknown work, if setting dj-mode
failed after a reset_resume.
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
logi_dj_recv_query_paired_devices() and logi_dj_recv_switch_to_dj_mode()
both have 2 callers which all log an error if the function fails. Move
the error logging to inside these 2 functions to remove the duplicated
error logging in the callers.
While at it also move the logi_dj_recv_send_report() call error handling
in logi_dj_recv_switch_to_dj_mode() to directly after the call. That call
only fails if the report cannot be found and in that case it does nothing,
so the msleep() is not necessary on failures.
Fixes: 6f20d32612 ("HID: logitech-dj: Fix error handling in logi_dj_recv_switch_to_dj_mode()")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The Logitech G Pro X Superlight 2 has a lightspeed receiver with a
product id of 0xc54d, this receiver behaves like the receiver used in
the original Logitech G Pro X Superlight (id 0xc547) including the 13
byte mouse reports.
This change adds a definition for this receiver id, and a mapping for
the recvr_type_gaming_hidpp_ls_1_3 type. With this change in place the
receiver now reports the battery status of the connected mouse over
wireless as well as exposing the HID interface needed for userspace to
perform additional configuration with libratbag/Piper.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
For pen and stylus, the ABS_Z event reports ABS_DISTANCE values
in the hid generic kernel driver. This test is to make sure that
the assignment is properly done for all pen and stylus tools.
Same as tilt, distance is an optional event.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Tatsunosuke Tobit <tatsunosuke.tobita@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
HID_GD_Z is mapped to ABS_Z for stylus and pen in hid-input.c. But HID_GD_Z
should be used to report ABS_DISTANCE for stylus and pen as described at:
Documentation/input/event-codes.rst#n226
* ABS_DISTANCE:
- Used to describe the distance of a tool from an interaction surface. This
event should only be emitted while the tool is hovering, meaning in close
proximity of the device and while the value of the BTN_TOUCH code is 0. If
the input device may be used freely in three dimensions, consider ABS_Z
instead.
- BTN_TOOL_<name> should be set to 1 when the tool comes into detectable
proximity and set to 0 when the tool leaves detectable proximity.
BTN_TOOL_<name> signals the type of tool that is currently detected by the
hardware and is otherwise independent of ABS_DISTANCE and/or BTN_TOUCH.
This patch makes the correct mapping. The ABS_DISTANCE is currently not mapped
by any HID usage in hid-generic driver.
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Cc: stable@kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.com>
When pressing the phsyical eraser button (remapped by us to the
Secondary Barrel Switch) while the tip is down, the device
gives us several false reports with a Tip Switch 0:
press| |release
SBS: [0 0 ... 1 1 1 ... 1 0 0 0 0 0 0 ...]
TS: [1 1 ... 1 0 1 ... 1 1 0 0 0 1 1 ...]
In both press/release the number of Tip Switch 0 reports can be up to 4
and *sometimes* the Tip Switch is released in the same report
as the button press/release event.
Paper over this by forcing the tip down for a few reports if it was down
before the button toggled.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/195
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Several bugs as outlined in udev-hid-bpf#66 and udev-hid-bpf!198:
- pressure curve is far from linear
- tilt range is ±60, not ±127
- pressing the second button sets both tip down and
barrel switch
Fix the second button by adding a Secondary Barrel Switch in the
existing padding and check for the tip down/barrel switch down combo.
When both values become true at the same time, set the Secondary Barrel
Switch instead.
Implement a custom pressure curve that maps the hardware range 0-102
linearly to the logical range 0-1224, and maps the hardware range
103-2047 logarithmically to the logical range 1232-2047. This mapping
isn’t perfect, but it’s way more natural than the stock configuration.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jan Felix Langenbach <JanFelix.Langenbach@protonmail.com>
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/200
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The 3Dconnexion SpaceNavigator HID report descriptor declares its axis
data to be "relative" when it is actually "absolute". This quirk was
addressed in the kernel in 2.6.33, but some SpaceNavigator variants have
a slightly different report descriptor whose axis input items are at
different offsets than those assumed by the kernel fixup.
Add a BPF fixup to handle both sets of offsets for known SpaceNavigator
variants if the descriptor has not already been fixed by the kernel.
Signed-off-by: Curran Muhlberger <curran@cs.cornell.edu>
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/181
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Pull HID fixes from Jiri Kosina:
- memory leak fixes in hid-uclogic, hid-ntrig and hid-playstation
drivers (Abdun Nihaal, Masami Ichikawa)
- regression fix for playback handling in hid-pidff (Tomasz Pakuła)
- initialization fix for some amd_sfh platforms (Mario Limonciello)
- a few assorted device-specific ID additions and quirks
* tag 'hid-for-linus-2025111901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: uclogic: Fix potential memory leak in error path
HID: playstation: Fix memory leak in dualshock4_get_calibration_data()
HID: pidff: Fix needs_playback check
HID: corsair-void: Use %pe for printing PTR_ERR
HID: elecom: Add support for ELECOM M-XT3URBK (018F)
HID: hid-input: Extend Elan ignore battery quirk to USB
HID: hid-ntrig: Prevent memory leak in ntrig_report_version()
HID: amd_sfh: Stop sensor before starting
HID: apple: Add SONiX AK870 PRO to non_apple_keyboards quirk list
HID: lenovo: fixup Lenovo Yoga Slim 7x Keyboard rdesc
HID: quirks: work around VID/PID conflict for 0x4c4a/0x4155
Pull memblock fix from Mike Rapoport:
"Fix memblock_estimated_nr_free_pages() for soft-reserved memory
The "soft-reserved" memory regions (EFI_MEMORY_SP) are added to the
memblock.reserved, but not to the memblock.memory. It causes
memblock_estimated_nr_free_pages() to return a value smaller value
than expected, or if it underflows, an extremely large value.
Calculate the number of estimated free pages using
memblock_reserved_kern_size() instead of memblock_reserved_size() to
fix the issue"
* tag 'fixes-2025-11-19' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: fix memblock_estimated_nr_free_pages() for soft-reserved memory
Pull kvm fixes from Paolo Bonzini:
"Arm:
- Only adjust the ID registers when no irqchip has been created once
per VM run, instead of doing it once per vcpu, as this otherwise
triggers a pretty bad conbsistency check failure in the sysreg code
- Make sure the per-vcpu Fine Grain Traps are computed before we load
the system registers on the HW, as we otherwise start running
without anything set until the first preemption of the vcpu
x86:
- Fix selftests failure on AMD, checking for an optimization that was
not happening anymore"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Fix redundant updates of LBR MSR intercepts
KVM: arm64: VHE: Compute fgt traps before activating them
KVM: arm64: Finalize ID registers only once per VM
In uclogic_params_ugee_v2_init_event_hooks(), the memory allocated for
event_hook is not freed in the next error path. Fix that by freeing it.
Fixes: a251d6576d ("HID: uclogic: Handle wireless device reconnection")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The memory allocated for buf is not freed in the error paths when
ps_get_report() fails. Free buf before jumping to transfer_failed label
Fixes: 947992c7fa ("HID: playstation: DS4: Fix calibration workaround for clone devices")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Reviewed-by: Silvan Jegen <s.jegen@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
A small bug made it's way here when rewriting code to Linux quality.
Currently, if an effect is not infinite and a program requests it's
playback with the same number of loops, the play command won't be fired
and if an effect is infinite, the spam will continue.
We want every playback update for non-infinite effects and only some
for infinite (detecting when a program requests stop with 0 which will
be different than previous value which is usually 1 or 255).
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The ELECOM M-XT3URBK trackball has an additional device ID (0x018F), which
shares the same report descriptor as the existing device (0x00FB). However,
the driver does not currently recognize this new ID, resulting in only five
buttons being functional.
This patch adds the new device ID so that all six buttons work properly.
Signed-off-by: Naoki Ueki <naoki25519@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Don't update the LBR MSR intercept bitmaps if they're already up-to-date,
as unconditionally updating the intercepts forces KVM to recalculate the
MSR bitmaps for vmcb02 on every nested VMRUN. The redundant updates are
functionally okay; however, they neuter an optimization in Hyper-V
nested virtualization enlightenments and this manifests as a self-test
failure.
In particular, Hyper-V lets L1 mark "nested enlightenments" as clean, i.e.
tell KVM that no changes were made to the MSR bitmap since the last VMRUN.
The hyperv_svm_test KVM selftest intentionally changes the MSR bitmap
"without telling KVM about it" to verify that KVM honors the clean hint,
correctly fails because KVM notices the changed bitmap anyway:
==== Test Assertion Failure ====
x86/hyperv_svm_test.c:120: vmcb->control.exit_code == 0x081
pid=193558 tid=193558 errno=4 - Interrupted system call
1 0x0000000000411361: assert_on_unhandled_exception at processor.c:659
2 0x0000000000406186: _vcpu_run at kvm_util.c:1699
3 (inlined by) vcpu_run at kvm_util.c:1710
4 0x0000000000401f2a: main at hyperv_svm_test.c:175
5 0x000000000041d0d3: __libc_start_call_main at libc-start.o:?
6 0x000000000041f27c: __libc_start_main_impl at ??:?
7 0x00000000004021a0: _start at ??:?
vmcb->control.exit_code == SVM_EXIT_VMMCALL
Do *not* fix this by skipping svm_hv_vmcb_dirty_nested_enlightenments()
when svm_set_intercept_for_msr() performs a no-op change. changes to
the L0 MSR interception bitmap are only triggered by full CPUID updates
and MSR filter updates, both of which should be rare. Changing
svm_set_intercept_for_msr() risks hiding unintended pessimizations
like this one, and is actually more complex than this change.
Fixes: fbe5e5f030 ("KVM: nSVM: Always recalculate LBR MSR intercepts in svm_update_lbrv()")
Cc: stable@vger.kernel.org
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20251112013017.1836863-1-yosry.ahmed@linux.dev
[Rewritten commit message based on mailing list discussion. - Paolo]
Reviewed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM/arm64 fixes for 6.18, take #3
- Only adjust the ID registers when no irqchip has been created once
per VM run, instead of doing it once per vcpu, as this otherwise
triggers a pretty bad conbsistency check failure in the sysreg code.
- Make sure the per-vcpu Fine Grain Traps are computed before we load
the system registers on the HW, as we otherwise start running without
anything set until the first preemption of the vcpu.
The recent fix to properly initialize the tags of the huge zero folio
had an unfortunate not-so-subtle side effect: it caused the actual
*contents* of the huge zero folio to not be initialized at all when the
hardware didn't support the memory tagging.
The reason was the unfortunate semantics of tag_clear_highpage(): on
hardware that didn't do the tagging, it would silently just not do
anything at all. And since this is done only on arm64 with MTE support,
that basically meant most hardware.
It wasn't necessarily immediately obvious since the huge zero page isn't
necessarily very heavily used - or because it might already be zero
because all-zeroes is the most common pattern. But it ends up causing
random odd user space failures when you do hit it.
The unfortunate semantics have been around for a while, but became a
real bug only when we started actively using __GFP_ZEROTAGS in the
generic get_huge_zero_folio() function - before that, it had only ever
been used in code that checked that the hardware supported it.
Fix this by simply changing the semantics of tag_clear_highpage() to
return whether it actually successfully did something or not. While at
it, also make it initialize multiple pages in one go, since that's
actually what the only caller wants it to do and it simplifies the whole
logic.
Fixes: adfb6609c6 ("mm/huge_memory: initialise the tags of the huge zero folio")
Link: https://lore.kernel.org/all/20251117082023.90176-1-00107082@163.com/
Reviewed-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reported-and-tested-by: David Wang <00107082@163.com>
Reported-and-tested-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull vfs fixes from Christian Brauner:
- Fix unitialized variable in statmount_string()
- Fix hostfs mounting when passing host root during boot
- Fix dynamic lookup to fail on cell lookup failure
- Fix missing file type when reading bfs inodes from disk
- Enforce checking of sb_min_blocksize() calls and update all callers
accordingly
- Restore write access before closing files opened by open_exec() in
binfmt_misc
- Always freeze efivarfs during suspend/hibernate cycles
- Fix statmount()'s and listmount()'s grab_requested_mnt_ns() helper to
actually allow mount namespace file descriptor in addition to mount
namespace ids
- Fix tmpfs remount when noswap is specified
- Switch Landlock to iput_not_last() to remove false-positives from
might_sleep() annotations in iput()
- Remove dead node_to_mnt_ns() code
- Ensure that per-queue kobjects are successfully created
* tag 'vfs-6.18-rc7.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
landlock: fix splats from iput() after it started calling might_sleep()
fs: add iput_not_last()
shmem: fix tmpfs reconfiguration (remount) when noswap is set
fs/namespace: correctly handle errors returned by grab_requested_mnt_ns
power: always freeze efivarfs
binfmt_misc: restore write access before closing files opened by open_exec()
block: add __must_check attribute to sb_min_blocksize()
virtio-fs: fix incorrect check for fsvq->kobj
xfs: check the return value of sb_min_blocksize() in xfs_fs_fill_super
isofs: check the return value of sb_min_blocksize() in isofs_fill_super
exfat: check return value of sb_min_blocksize in exfat_read_boot_sector
vfat: fix missing sb_min_blocksize() return value checks
mnt: Remove dead code which might prevent from building
bfs: Reconstruct file type when loading from disk
afs: Fix dynamic lookup to fail on cell lookup failure
hostfs: Fix only passing host root in boot stage with new mount
fs: Fix uninitialized 'offp' in statmount_string()
Pull sched_ext fixes from Tejun Heo:
"Five fixes addressing PREEMPT_RT compatibility and locking issues.
Three commits fix potential deadlocks and sleeps in atomic contexts on
RT kernels by converting locks to raw spinlocks and ensuring IRQ work
runs in hard-irq context. The remaining two fix unsafe locking in the
debug dump path and a variable dereference typo"
* tag 'sched_ext-for-6.18-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Use IRQ_WORK_INIT_HARD() to initialize rq->scx.kick_cpus_irq_work
sched_ext: Fix possible deadlock in the deferred_irq_workfn()
sched/ext: convert scx_tasks_lock to raw spinlock
sched_ext: Fix unsafe locking in the scx_dump_state()
sched_ext: Fix use of uninitialized variable in scx_bpf_cpuperf_set()
Pull MTD fixes from Miquel Raynal:
"Mostly small misc fixes, here they are sorted by sub-subsystem:
ECC fixes:
- Realtek Kconfig fix
SPI NAND fixes:
- Remove nonexistent QE bit on FMSH FM25S01A
Raw NAND fixes:
- Prevent DMA device NULL pointer dereference in Cadence driver
MTD device fixes:
- Possible integer overflow in read/write ioctls
- Fix the IRQ handler pointer in the onenand driver, even if in
practice it is never dereferenced.
* tag 'mtd/fixes-for-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: onenand: Pass correct pointer to IRQ handler
mtd: spinand: fmsh: remove QE bit for FM25S01A flash
mtd: rawnand: cadence: fix DMA device NULL pointer dereference
mtd: rawnand: realtek: Make rtl_ecc_engine_ops const
mtd: nand: MTD_NAND_ECC_REALTEK should depend on HAS_DMA
mtd: nand: realtek-ecc: Fix a IS_ERR() vs NULL bug in probe
mtdchar: fix integer overflow in read/write ioctls
For PREEMPT_RT kernels, the kick_cpus_irq_workfn() be invoked in
the per-cpu irq_work/* task context and there is no rcu-read critical
section to protect. this commit therefore use IRQ_WORK_INIT_HARD() to
initialize the per-cpu rq->scx.kick_cpus_irq_work in the
init_sched_ext_class().
Signed-off-by: Zqiang <qiang.zhang@linux.dev>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix writing bpf_prog (infos|btfs)_cnt to data file, to not generate
invalid perf.data files in some corner cases.
- Fix 'perf top' segfault by ensuring libbfd is initialized. This is an
opt-in feature due to license incompatibilities.
- Fix segfault in 'perf lock' due to missing kernel map.
- Fix 'perf lock contention' test.
- Don't fail fast path detection if binutils-devel isn't available.
- Sync KVM's vmx.h with the kernel to pick SEAMCALL exit reason.
* tag 'perf-tools-fixes-for-v6.18-2-2025-11-16' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf libbfd: Ensure libbfd is initialized prior to use
perf test: Fix lock contention test
perf lock: Fix segfault due to missing kernel map
tools headers UAPI: Sync KVM's vmx.h with the kernel to pick SEAMCALL exit reason
perf build: Don't fail fast path feature detection when binutils-devel is not available
perf header: Write bpf_prog (infos|btfs)_cnt to data file
Pull misc fixes from Andrew Morton:
"7 hotfixes. 5 are cc:stable, 4 are against mm/
All are singletons - please see the respective changelogs for details"
* tag 'mm-hotfixes-stable-2025-11-16-10-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm, swap: fix potential UAF issue for VMA readahead
selftests/user_events: fix type cast for write_index packed member in perf_test
lib/test_kho: check if KHO is enabled
mm/huge_memory: fix folio split check for anon folios in swapcache
MAINTAINERS: update David Hildenbrand's email address
crash: fix crashkernel resource shrink
mm: fix MAX_FOLIO_ORDER on powerpc configs with hugetlb
Pull firewire fixes from Takashi Sakamoto:
"This includes some fixes for the topology map, newly introduced in
v6.18 kernel"
* tag 'firewire-fixes-6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: fix to update generation field in topology map
firewire: core: Initialize topology_map.lock
Pull EDAC fixes from Borislav Petkov:
- In Versalnet, handle the reporting of non-standard hw errors whose
information can come in more than one remote processor message.
- Explicitly reenable ECC checking after a warm reset in Altera OCRAM
as those registers are reset to default otherwise
- Fix single-bit error injection in Altera EDAC to not inject errors
directly in ECC RAM and thus lead to false double-bit errors due to
same ECC RAM being in concurrent use
* tag 'edac_urgent_for_v6.18_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/altera: Use INTTEST register for Ethernet and USB SBE injection
EDAC/altera: Handle OCRAM ECC enable after warm reset
EDAC/versalnet: Handle split messages for non-standard errors
Since commit 78524b05f1 ("mm, swap: avoid redundant swap device
pinning"), the common helper for allocating and preparing a folio in the
swap cache layer no longer tries to get a swap device reference
internally, because all callers of __read_swap_cache_async are already
holding a swap entry reference. The repeated swap device pinning isn't
needed on the same swap device.
Caller of VMA readahead is also holding a reference to the target entry's
swap device, but VMA readahead walks the page table, so it might encounter
swap entries from other devices, and call __read_swap_cache_async on
another device without holding a reference to it.
So it is possible to cause a UAF when swapoff of device A raced with
swapin on device B, and VMA readahead tries to read swap entries from
device A. It's not easy to trigger, but in theory, it could cause real
issues.
Make VMA readahead try to get the device reference first if the swap
device is a different one from the target entry.
Link: https://lkml.kernel.org/r/20251111-swap-fix-vma-uaf-v1-1-41c660e58562@tencent.com
Fixes: 78524b05f1 ("mm, swap: avoid redundant swap device pinning")
Suggested-by: Huang Ying <ying.huang@linux.alibaba.com>
Signed-off-by: Kairui Song <kasong@tencent.com>
Acked-by: Chris Li <chrisl@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
