UAPI Changes:
- Add madvise interface (Himal Prasad Ghimiray)
- Add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count and
memory attributes (Himal Prasad Ghimiray)
- Handle Firmware reported Hardware Errors notifying userspace with
device wedged uevent (Riana Tauro)
Cross-subsystem Changes:
- Add a vendor-specific recovery method to drm device wedged uevent
(Riana Tauro)
Driver Changes:
- Use same directory structure in debugfs as in sysfs (Michal Wajdeczko)
- Cleanup and future-proof VRAM region initialization (Piotr Piórkowski)
- Add G-states and PCIe link states to debugfs (Soham Purkait)
- Cleanup eustall debug messages (Harish Chegondi)
- Add SR-IOV support to restore Compression Control Surface (CCS) to
Xe2 and later (Satyanarayana K V P)
- Enable SR-IOV PF mode by default on supported platforms without
needing CONFIG_DRM_XE_DEBUG and mark some platforms behind
force_probe as supported (Michal Wajdeczko)
- More targeted log messages (Michal Wajdeczko)
- Cleanup STEER_SEMAPHORE/MCFG_MCR_SELECTOR usage (Nitin Gote)
- Use common code to emit flush (Tvrtko Ursulin)
- Add/extend more HW workarounds and tunings for Xe2 and Xe3
(Sk Anirban, Tangudu Tilak Tirumalesh, Nitin Gote, Chaitanya Kumar Borah)
- Add a generic dependency scheduler to help with TLB invalidations
and future scenarios (Matthew Brost)
- Use DRM scheduler for delayed GT TLB invalidations (Matthew Brost)
- Error out on incorrect device use in configfs
(Michal Wajdeczko, Lucas De Marchi)
- Refactor configfs attributes (Michal Wajdeczko / Lucas De Marchi)
- Allow configuring future VF devices via configfs (Michal Wajdeczko)
- Implement some missing XeLP workarounds (Tvrtko Ursulin)
- Generalize WA BB setup/emission and add support for
mid context restore BB, aka indirect context (Tvrtko Ursulin)
- Prepare the driver to expose mmio regions to userspace
in future (Ilia Levi)
- Add more GuC load error status codes (John Harrison)
- Document DRM_XE_GEM_CREATE_FLAG_DEFER_BACKING (Priyanka Dandamudi)
- Disable CSC and RPM on VFs (Lukasz Laguna, Satyanarayana K V P)
- Fix oops in xe_gem_fault with PREEMPT_RT (Maarten Lankhorst)
- Skip LMTT update if no LMEM was provisioned (Michal Wajdeczko)
- Add support to VF migration (Tomasz Lis)
- Use a helper for guc_waklv_enable functions (Jonathan Cavitt)
- Prepare GPU SVM for migration of THP (Francois Dugast)
- Program LMTT directory pointer on all GTs within a tile
(Piotr Piórkowski)
- Rename XE_WA to XE_GT_WA to better convey its scope vs the device WAs
(Matt Atwood)
- Allow to match devices on PCI devid/vendorid only (Lucas De Marchi)
- Improve PDE PAT index selection (Matthew Brost)
- Consolidate ASID allocation in xe_vm_create() vs
xe_vm_create_ioctl() (Piotr Piórkowski)
- Resize VF BARS to max possible size according to number of VFs
(Michał Winiarski)
- Untangle vm_bind_ioctl cleanup order (Christoph Manszewski)
- Start fixing usage of XE_PAGE_SIZE vs PAGE_SIZE to improve
compatibility with non-x86 arch (Simon Richter)
- Improve tile vs gt initialization order and accounting
(Gustavo Sousa)
- Extend WA kunit test to PTL
- Ensure data is initialized before transferring to pcode
(Stuart Summers)
- Add PSMI support for HW validation (Lucas De Marchi,
Vinay Belgaumkar, Badal Nilawar)
- Improve xe_dma_buf test (Thomas Hellström, Marcin Bernatowicz)
- Fix basename() usage in generator with !glibc (Carlos Llamas)
- Ensure GT is in C0 during resumes (Xin Wang)
- Add TLB invalidation abstraction (Matt Brost, Stuart Summers)
- Make MI_TLB_INVALIDATE conditional on migrate (Matthew Auld)
- Prepare xe_nvm to be initialized early for future use cases
(Riana Tauro)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/nuejxdhnalyok7tzwkrj67dwjgdafwp4mhdejpyyqnrh4f2epq@nlldovuflnbx
Update the legacy (non-DC) display code to respect the maximum
pixel clock for HDMI and DVI-D. Reject modes that would require
a higher pixel clock than can be supported.
Also update the maximum supported HDMI clock value depending on
the ASIC type.
For reference, see the DC code:
check max_hdmi_pixel_clock in dce*_resource.c
v2:
Fix maximum clocks for DVI-D and DVI/HDMI adapters.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Read link setting inside mode validation is not always the final downlink setting.
It is found true in Synaptics branch device.
At bootup, the preferred mode being set right after 1080p is set. It occurred
before graphic load. That modeset switch in a short period of time makes
the branch device switch back and forth from lower and higher link rate,
observed at Synaptics branch device.
DP2 RTK hub on the other hand, sticks to highest available downlink rate after bootup.
Existing check of runtime downlink setting in mode validation shows asynchronous at
branch device link switch, i.e., downlink switch to higher link rate not yet complete
when the mode validation tries to probe the downlink setting. That makes mode validation
checking downlink setting making wrong decision by pruning modes that should pass the
validation after the downlink setting switch is complete.
[how]
If Synaptics is found at the last branch, skip checking downlink setting
at mode validation.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Previously, when calculating dto phase, we would incorrectly fail when phase
<=0 without additionally checking for the integer value. This meant that
calculations would incorrectly fail when the desired pixel clock was an exact
multiple of the reference clock.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Clay King <clayking@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Bounding box values can be stored in multiple locations. (e.g. PMFW, VBIOS, DMUB).
The source and interpretation of these values can vary with DCN revision
so there should be a component that can gather these values and translate
them accordingly
[How]
Have component start with the statically defined values as a base.
Then update them as needed with DCN-specific logic
Guard this component with FPU flags since values need to be in float point.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Custom brightness curve works by walking through all data points one
by one. When the brightness value is at either extreme this is a lot
of data points to walk. This is especially noticeable when moving a
brightness slider around how it can lag.
[How]
Bisect the data points to find the closest for interpolation.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
-Pipe splitting allows for clocks to be reduced, but when using TMDS 420,
reduced clocks lead to missed clocks cycles on clock resyncing
[How]
-Impose a minimum clock when using TMDS 420
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Relja Vojvodic <rvojvodi@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The patch uses power state of VCN instances for requesting video
profile.
In idle worker of a vcn instance, when there is no outstanding
submisssion or fence, the instance is put to power gated state. When
all instances are powered off that means video profile is no longer
required. A request is made to turn off video profile.
A job submission starts with begin_use of ring, and at that time
vcn instance state is changed to power on. Subsequently a check is
made for active video profile, and if not active, a request is made.
Fixes: 3b669df92c ("drm/amdgpu/vcn: adjust workload profile handling")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1:
1. Unified amdgpu ip block name print with format
"{ip_type}_v{major}_{minor}_{rev}"
2. Avoid IP block name conflicts for SMU/PSP ip block
v2:
Update IP block print format to keep legacy IP block name (Alex)
"{ip_type}_v{major}_{minor}_{rev} ({funcs->name})"
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Using the previous firmware could lead to problems with
PROTECTED_FENCE_SIGNAL commands, specifically causing register
conflicts between MCU_DBG0 and MCU_DBG1.
The updated firmware versions ensure proper alignment
and unification of the SDMA_SUBOP_PROTECTED_FENCE_SIGNAL value with SDMA 7.x,
resolving these hardware coordination issues
Fixes: e8cca30d8b ("drm/amdgpu/sdma6: add ucode version checks for userq support")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Notify pmfw when bad page threshold is exceeded, no matter the module
parameter 'bad_page_threshold' is set or not.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For multiple VCN instances case we get multiple lines of the same
message like below:
amdgpu 0000:43:00.0: amdgpu: Found VCN firmware Version ENC: 1.24 DEC: 9 VEP: 0 Revision: 11
amdgpu 0000:43:00.0: amdgpu: Found VCN firmware Version ENC: 1.24 DEC: 9 VEP: 0 Revision: 11
By adding instance number to the log message for multiple VCN instances,
each line will clearly indicate which VCN instance it refers to.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use max() to reduce the code and improve readability.
No functional changes.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix a kernel-doc warning by documenting the num_rmcm_3dluts member of struct mpc_color_caps.
v2: improve comment (Melissa)
Signed-off-by: Kavithesh A.S <kavitheshnitt@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm-misc-next for v6.18:
UAPI Changes:
atomic:
- Reallow no-op async page flips
Cross-subsystem Changes:
hid:
- i2c-hid: Make elan touch controllers power on after panel is enabled
video:
- Improve pixel-format handling for struct screen_info
Core Changes:
display:
- dp: Fix command length
Driver Changes:
amdxdna:
- Fixes
bridge:
- Add support for Radxa Ra620 plus DT bindings
msm:
- Fix VMA allocation
panel:
- ilitek-ili9881c: Refactor mode setting; Add support for Bestar
BSD1218-A101KL68 LCD plus DT bindings
- lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings
rockchip:
- dsi2: Add support for RK3576 plus DT bindings
stm:
- Clean up logging
vesadrm:
- Support 8-bit palette mode
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250828065714.GA11906@linux.fritz.box
When clearing VRAM we should be able to skip invalidating the TLBs if we
are only using the identity map to access VRAM (which is the common
case), since no modifications are made to PTEs on the fly. Also since we
use huge 1G entries within the identity map, there should be a pretty
decent chance that the next packet(s) (if also clears) can avoid a tree
walk if we don't shoot down the TLBs, like if we have to process a long
stream of clears.
For normal moves/copies, we usually always end up with the src or dst
being system memory, meaning we can't only rely on the identity map and
will also need to emit PTEs and so will always require a TLB flush.
v2:
- Update commit to explain the situation for normal copies (Matt B)
- Rebase on latest changes
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250808110452.467513-2-matthew.auld@intel.com
The frontend exposes an API to the driver to send invalidations, handles
sequence number assignment, synchronization (fences), and provides a
timeout mechanism. The backend issues the actual invalidation to the
hardware (or firmware).
The new layering easily allows issuing TLB invalidations to different
hardware or firmware interfaces.
Normalize some naming while here too.
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250826182911.392550-10-stuart.summers@intel.com
Currently the CT lock is used to cover TLB invalidation
sequence number updates. In an effort to separate the GuC
back end tracking of communication with the firmware from
the front end TLB sequence number tracking, add a new lock
here to specifically track those sequence number updates
coming in from the user.
Apart from the CT lock, we also have a pending lock to
cover both pending fences and sequence numbers received
from the back end. Those cover interrupt cases and so
it makes not to overload those with sequence numbers
coming in from new transactions. In that way, we'll employ
a mutex here.
v2: Actually add the correct lock rather than just dropping
it... (Matt)
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250826182911.392550-2-stuart.summers@intel.com
Although it's possible to change the attributes in runtime, they have no
effect after the driver is already bound to the device. Check for that
and return -EBUSY in that case.
This should help users understand what's going on when the behavior is
not changing even if the value from the configfs is "right", but it got
to that state too late.
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Link: https://lore.kernel.org/r/20250826153210.3068808-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
If the doorbell is invalid, be sure to set the r to an error
state so the function returns an error.
Reviewed-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The minimum firmware versions required for user queue functionality
have been increased to address an issue where the queue privilege
state was lost during queue connect operations.
The problem occurred because the privilege state was being restored
to its initial value at the beginning of the function, overwriting
the state that was properly set during the queue connect case.
This commit updates the minimum version requirements:
- ME firmware from 2390 to 2420
- PFP firmware from 2530 to 2580
- MEC firmware from 2600 to 2650
- MES firmware remains at 120
These updated firmware versions contain the necessary fixes to
properly maintain queue privilege state throughout connect operations.
Fixes: 61ca97e959 ("drm/amdgpu: Add fw minimum version check for usermode queue")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to cancel any outstanding work at both suspend
and driver teardown. Move the cancel to hw_fini which
gets called in both cases.
Reviewed-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
