Add support for Surface Laptop 7 machines, based on X1E80100.
The feature status is mostly on par with other X Elite machines,
notably lacking:
- USB-A and probably USB-over-Surface-connector (pending NXP retimer
support)
- SD card reader (Realtek RTS5261 connected over PCIe)
- Touchscreen and touchpad support (hid-over-SPI [1])
- Audio (a quick look suggests the setup is very close to the one in
X1E CRD)
The two Surface Laptop 7 SKUs (13.8" and 15") only have very minor
differences, amounting close to none on the software side. Even the
MBN firmware files and ACPI tables are shared between the two machines.
With that in mind, support is added for both, although only the larger
one was physically tested. Display differences will be taken care of
through fused-in EDID and other matters should be solved within the
EC and boot firmware.
[1] https://www.microsoft.com/en-us/download/details.aspx?id=103325
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Link: https://lore.kernel.org/r/20240826-topic-sl7-v2-5-c32ebae78789@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The SM8150 MTP board does not have magically different GPU than the
SM8150, so it cannot use amd,imageon compatible, also pointed by
dtbs_check:
sm8150-mtp.dtb: gpu@2c00000: compatible: 'oneOf' conditional failed, one must be fixed:
['qcom,adreno-640.1', 'qcom,adreno', 'amd,imageon'] is too long
'qcom,adreno-640.1' does not match '^qcom,adreno-[0-9a-f]{8}$'
'qcom,adreno-640.1' does not match '^amd,imageon-200\\.[0-1]$'
'amd,imageon' was expected
The incorrect amd,imageon compatible was added in commit f30ac26def
("arm64: dts: qcom: add sm8150 GPU nodes") to the SM8150 and later moved
to the SM8150 MTP board in commit 1642ab96ef ("arm64: dts: qcom:
sm8150: Don't start Adreno in headless mode") with an intention to allow
headless mode. This should be solved via proper driver quirks, not fake
compatibles.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240821140116.436441-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
IPQ SoCs dont involve RPM in managing NoC related clocks and
there is no NoC scaling. Linux itself handles these clocks.
However, these should not be exposed as just clocks and align
with other Qualcomm SoCs that handle these clocks from a
interconnect provider.
Hence include icc provider capability to the gcc node so that
peripherals can use the interconnect facility to enable these
clocks. Change USB to use the icc-clk framework for the iface
clock.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/20240730054817.1915652-6-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Move lpass codecs va and wsa macros to use the clks directly from
AFE clock controller instead of going via gfm mux like other codec macros
and SoCs.
This makes it more align with the other SoCs and codec macros in this SoC
which take AFE clocks directly. This will also avoid an extra clk mux layer,
provides consistency and avoids the buggy mux driver which will be removed.
This should also fix RB5 audio.
Remove the gfm mux drivers for both audiocc and aoncc.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240815170542.20754-1-srinivas.kandagatla@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The dts and dtsi add support for msm8916 variant of Samsung Galaxy J3
SM-J320YZ smartphone released in 2016.
Add a device tree for SM-J320YZ with initial support for:
- GPIO keys
- SDHCI (internal and external storage)
- USB Device Mode
- UART (on USB connector via the SM5703 MUIC)
- WCNSS (WiFi/BT)
- Regulators
- QDSP6 audio
- Speaker/earpiece/headphones/microphones via digital/analog codec in
MSM8916/PM8916
- WWAN Internet via BAM-DMUX
- Touchscreen
- Accelerometer
There are different variants of J3, with some differences in MUIC, sensor,
NFC and touch key I2C buses.
The common parts are shared in msm8916-samsung-j3-common.dtsi to reduce
duplication.
Signed-off-by: Lin, Meng-Bo <linmengbo06890@proton.me>
Link: https://lore.kernel.org/r/20240804065854.42437-3-linmengbo06890@proton.me
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The SC7180/SM7125 SoCs have a special pin for UFS reset. Generally, this
pin is the same for all devices on the same SoC because it is hardcoded
in the pinctrl driver. Therefore, it might seem appropriate to add this
pin configuration in sc7180.dtsi. However, this pin is defined in the
device-specific DTS files instead of the SoC-level DTS files in all
Qualcomm DTS. To maintain consistency with this approach, we will follow
the same style.
Add reset-gpios to ufs_mem_hc.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Link: https://lore.kernel.org/r/20240731182412.27966-1-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Rename qdss@88800000 memory region as qlink_logging memory region
and add qdss_mem memory region at address of 0x88500000,
qlink_logging is being added at the memory region at the address
of 0x88800000 as the region is being used by modem firmware.
Since different DSM region size is required for different modem
firmware, split mpss_dsmharq_mem region into 2 separate regions.
This would provide the flexibility to remove the region which is
not required for a particular platform. Based on the modem firmware
either both the regions have to be used or only mpss_dsm_mem has
to be used. Also, reduce the size of mpssadsp_mem region.
Signed-off-by: Naina Mehta <quic_nainmeht@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240709064924.325478-4-quic_nainmeht@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The multiport USB controller in the SA8295P ADP is connected to four USB
Type-A ports. VBUS for each of these ports are provided by a
TPS2559QWDRCTQ1 regulator, controlled from PMIC GPIOs.
Add the necessary regulators and GPIO configuration to power these.
It seems reasonable that these regulators should be referenced as vbus
supply of usb-a-connector nodes and controlled by e.g. dwc3, but as this
is not supported in Linux today the regulators are left always-on for
now.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240707085624.3411961-1-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm SM8550 SoC contains 3 Camera Control Interface controllers
very similar to the ones found on other Qualcomm SoCs.
One noticeable difference is that cci@ac16000 controller provides only
one I2C bus and has an additional control over AON CCI pins gpio208
and gpio209, but this feature is not yet supported in the CCI driver.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20240612215835.1149199-4-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Merge the SM8550/SM8650 display clock controller binding header file
merge through a topic branch, to ensure the bindings are kept in sync
between clock and DeviceTree source branches.
