Now that we have DRM_BRIDGE_ATTACH_NO_CONNECTOR framework, handle the
HDCP state change in bridge atomic check as well to enable correct
functioning for HDCP in both DRM_BRIDGE_ATTACH_NO_CONNECTOR and
!DRM_BRIDGE_ATTACH_NO_CONNECTOR case.
Without this patch, when using DRM_BRIDGE_ATTACH_NO_CONNECTOR flag, HDCP
state changes would not be properly handled during atomic commits,
potentially leading to HDCP authentication failures or incorrect
protection status for content requiring HDCP encryption.
Fixes: 6a3608eae6 ("drm: bridge: cdns-mhdp8546: Enable HDCP")
Signed-off-by: Harikrishna Shenoy <h-shenoy@ti.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patch.msgid.link/20251209120332.3559893-4-h-shenoy@ti.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Add cdns_mhdp_bridge_mode_valid() to check if specific mode is valid for
this bridge or not. In the legacy usecase with
!DRM_BRIDGE_ATTACH_NO_CONNECTOR we were using the hook from
drm_connector_helper_funcs but with DRM_BRIDGE_ATTACH_NO_CONNECTOR
we need to have mode_valid() in drm_bridge_funcs.
Without this patch, when using DRM_BRIDGE_ATTACH_NO_CONNECTOR
flag, the cdns_mhdp_bandwidth_ok() function would not be called
during mode validation, potentially allowing modes that exceed
the bridge's bandwidth capabilities to be incorrectly marked as
valid.
Fixes: c932ced6b5 ("drm/tidss: Update encoder/bridge chain connect model")
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Harikrishna Shenoy <h-shenoy@ti.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20251209120332.3559893-3-h-shenoy@ti.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
In case if we get errors in cdns_mhdp_link_up() or cdns_mhdp_reg_read()
in atomic_enable, we will go to cdns_mhdp_modeset_retry_fn() and will hit
NULL pointer while trying to access the mutex. We need the connector to
be set before that. Unlike in legacy cases with flag
!DRM_BRIDGE_ATTACH_NO_CONNECTOR, we do not have connector initialised
in bridge_attach(), so add the mhdp->connector_ptr in device structure
to handle both cases with DRM_BRIDGE_ATTACH_NO_CONNECTOR and
!DRM_BRIDGE_ATTACH_NO_CONNECTOR, set it in atomic_enable() earlier to
avoid possible NULL pointer dereference in recovery paths like
modeset_retry_fn() with the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag set.
Fixes: c932ced6b5 ("drm/tidss: Update encoder/bridge chain connect model")
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Harikrishna Shenoy <h-shenoy@ti.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patch.msgid.link/20251209120332.3559893-2-h-shenoy@ti.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Add a new kunit test gpu_test_buddy_alloc_range() that exercises the
__gpu_buddy_alloc_range() exact-range allocation path, triggered when
start + size == end with flags=0.
The test covers:
- Basic exact-range allocation of the full mm
- Exact-range allocation of equal sub-ranges (quarters)
- Minimum chunk-size exact ranges at start, middle, and end offsets
- Non power-of-two mm size with multiple roots, including cross-root
exact-range allocation
- Randomized exact-range allocations of N contiguous page-aligned
slices in random order
- Negative: partially allocated range must reject overlapping exact
alloc
- Negative: checkerboard allocation pattern rejects exact range over
partially occupied pairs
- Negative: misaligned start, unaligned size, and out-of-bounds end
- Free and re-allocate the same exact range across multiple iterations
- Various power-of-two exact ranges at natural alignment
Cc: Christian König <christian.koenig@amd.com>
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Sanjay Yadav <sanjay.kumar.yadav@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patch.msgid.link/20260302150947.47535-2-sanjay.kumar.yadav@intel.com
Add KUnit test to validate offset-aligned allocations in the DRM buddy
allocator.
Validate offset-aligned allocation:
The test covers allocations with sizes smaller than the alignment constraint
and verifies correct size preservation, offset alignment, and behavior across
multiple allocation sizes. It also exercises fragmentation by freeing
alternating blocks and confirms that allocation fails once all aligned offsets
are consumed.
Stress subtree_max_alignment propagation:
Exercise subtree_max_alignment tracking by allocating blocks with descending
alignment constraints and freeing them in reverse order. This verifies that
free-tree augmentation correctly propagates the maximum offset alignment
present in each subtree at every stage.
v2:
- Move the patch to gpu/tests/gpu_buddy_test.c file.
v3:
- Fixed build warnings reported by kernel test robot <lkp@intel.com>
v4:(Matthew)
- Use IS_ALIGNED() instead of manual alignment checks
- Simplify order iteration loop for readability
- Remove extra newline
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260306060155.2114-2-Arunpravin.PaneerSelvam@amd.com
Large alignment requests previously forced the buddy allocator to search by
alignment order, which often caused higher-order free blocks to be split even
when a suitably aligned smaller region already existed within them. This led
to excessive fragmentation, especially for workloads requesting small sizes
with large alignment constraints.
This change prioritizes the requested allocation size during the search and
uses an augmented RB-tree field (subtree_max_alignment) to efficiently locate
free blocks that satisfy both size and offset-alignment requirements. As a
result, the allocator can directly select an aligned sub-region without
splitting larger blocks unnecessarily.
A practical example is the VKCTS test
dEQP-VK.memory.allocation.basic.size_8KiB.reverse.count_4000, which repeatedly
allocates 8 KiB buffers with a 256 KiB alignment. Previously, such allocations
caused large blocks to be split aggressively, despite smaller aligned regions
being sufficient. With this change, those aligned regions are reused directly,
significantly reducing fragmentation.
This improvement is visible in the amdgpu VRAM buddy allocator state
(/sys/kernel/debug/dri/1/amdgpu_vram_mm). After the change, higher-order blocks
are preserved and the number of low-order fragments is substantially reduced.
Before:
order- 5 free: 1936 MiB, blocks: 15490
order- 4 free: 967 MiB, blocks: 15486
order- 3 free: 483 MiB, blocks: 15485
order- 2 free: 241 MiB, blocks: 15486
order- 1 free: 241 MiB, blocks: 30948
After:
order- 5 free: 493 MiB, blocks: 3941
order- 4 free: 246 MiB, blocks: 3943
order- 3 free: 123 MiB, blocks: 4101
order- 2 free: 61 MiB, blocks: 4101
order- 1 free: 61 MiB, blocks: 8018
By avoiding unnecessary splits, this change improves allocator efficiency and
helps maintain larger contiguous free regions under heavy offset-aligned
allocation workloads.
v2:(Matthew)
- Update augmented information along the path to the inserted node.
v3:
- Move the patch to gpu/buddy.c file.
v4:(Matthew)
- Use the helper instead of calling _ffs directly
- Remove gpu_buddy_block_order(block) >= order check and drop order
- Drop !node check as all callers handle this already
- Return larger than any other possible alignment for __ffs64(0)
- Replace __ffs with __ffs64
v5:(Matthew)
- Drop subtree_max_alignment initialization at gpu_block_alloc()
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260306060155.2114-1-Arunpravin.PaneerSelvam@amd.com
While dev_pm_domain_detach_list() itself contains the necessary NULL check,
the access to struct dev_pm_domain_list->num_pds does not and thus faults
on devices with <=1 power domains (where the struct dev_pm_domain_list
machinery is skipped for simplicity).
This can be reproduced on AM625, which produces the following log[1]:
[ 10.820056] powervr fd00000.gpu: Direct firmware load for powervr/rogue_33.15.11.3_v1.fw failed with error -2
[ 10.831903] powervr fd00000.gpu: [drm] *ERROR* failed to load firmware powervr/rogue_33.15.11.3_v1.fw (err=-2)
...
[ 10.844023] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
...
[ 11.090162] Call trace:
[ 11.092600] pvr_power_domains_fini+0x18/0xa0 [powervr] (P)
[ 11.098218] pvr_probe+0x100/0x14c [powervr]
[ 11.102505] platform_probe+0x5c/0xa4
Fixes: e19cc5ab34 ("drm/imagination: Use dev_pm_domain_attach_list()")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/r/c353fdef-9ccd-4a11-a527-ab4a792d8e70@sirena.org.uk/ [1]
Tested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20260227-single-domain-power-fixes-v1-1-d37ba0825f7c@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Parse the data lane count out of DT. Limit the supported data lanes
to 1..4 which is the maximum available DSI pairs on the connector of
any known panels which may use this bridge. Internally, this bridge
is an ChipOne ICN6211 which loads its register configuration from a
dedicated storage and its I2C does not seem to be accessible. The
ICN6211 also supports up to 4 DSI lanes, so this is a hard limit.
To avoid any breakage on old DTs where the parsing of data lanes from
DT may fail, fall back to the original hard-coded value of 2 lanes and
warn user.
The lane configuration is preconfigured in the bridge for each of the
WaveShare panels. The 13.3" DSI panel works with 4-lane configuration,
others seem to use 2-lane configuration. This is a hardware property,
so the actual count should come from DT.
Reviewed-by: Joseph Guo <qijian.guo@nxp.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260115024004.660986-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Describe 1..4 DSI lanes as supported. Internally, this bridge is
an ChipOne ICN6211 which loads its register configuration from a
dedicated storage and its I2C does not seem to be accessible. The
ICN6211 supports up to 4 DSI lanes, so this is a hard limit for
this bridge. The lane configuration is preconfigured in the bridge
for each of the WaveShare panels.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260115024004.660986-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Implement per-user resource limits to prevent resource exhaustion.
Root users can allocate all available contexts (128) and doorbells
(255), while non-root users are limited to half of the available
resources (64 contexts and 127 doorbells respectively).
This prevents scenarios where a single user could monopolize NPU
resources and starve other users on multi-user systems.
Change doorbell ID and command queue ID allocation errors to debug
messages as those are user triggered.
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Link: https://patch.msgid.link/20260302202207.469442-1-maciej.falkowski@linux.intel.com
Replace the internal DRM framebuffer with a DRM client buffer. The
client buffer allocates the DRM framebuffer on a file and also uses
GEM object handles via the regular ADDFB2 interfaces. This unifies
framebuffer allocation for clients in user space and gma500's internal
fbdev emulation.
Also simplify the clean-up side of the fbdev emulation.
Later patches will allow for streamlining gma500's framebuffer code and
DRM's fbdev emulation in general.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patch.msgid.link/20260206133458.226467-5-tzimmermann@suse.de
Replace the geometry and size calculation in gma500's fbdev emulation
with DRM format helpers. This consists of 4CC lookup from the fbdev
parameters, format loockup, pitch calculation and size calculation.
Then allocate the GEM buffer object for the framebuffer memory from
the calculated size.
As before, fallback to 16-bit colors if the stolen memory is insufficient
for 32-bit colors. But look at the result from psb_gem_create() instead
of guessing before the allocation. The new method is more reliable when
others allocate from stolen video memory (e.g., cursors).
Set up mode_cmd with the calculated values just before allocating the
framebuffer. This code will later be replaced with a DRM client buffer.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patch.msgid.link/20260206133458.226467-4-tzimmermann@suse.de
In order to avoid any probe ordering issue, the best practice is to move
the secondary MIPI-DSI device registration and attachment to the
MIPI-DSI host at probe time.
Besides solving the probe ordering problems, this makes the bridge work
with R-Car DU. The R-Car DU will attempt to locate the DSI host bridge in
its own rcar_du_probe()->rcar_du_modeset_init()->rcar_du_encoder_init()
by calling of_drm_find_bridge() which calls of_drm_find_and_get_bridge()
and iterates over bridge_list to locate the DSI host bridge.
However, unless the WS driver calls mipi_dsi_attach() in probe(), the
DSI host bridge .attach callback rcar_mipi_dsi_host_attach() is not
called and the DSI host bridge is not added into bridge_list. Therefore
the of_drm_find_and_get_bridge() called from du_probe() will never find
the DSI host bridge and probe will indefinitelly fail with -EPROBE_DEFER.
The circular dependency here is, that if rcar_du_encoder_init() would
manage to find the DSI host bridge, it would call the WS driver .attach
callback ws_bridge_bridge_attach(), but this is too late and can never
happen. This change avoids the circular dependency.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20260206125801.78705-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Introduce gpu_buddy_assert(), a small helper that wraps WARN_ON() and,
when CONFIG_KUNIT is enabled, also calls kunit_fail_current_test() so
that any active KUnit test is marked as failed. In non-KUnit builds
the macro reduces to WARN_ON(), preserving existing behaviour.
Stringify the asserted condition in the failure message to make it easy
to identify which assertion fired. Leave the WARN_ON() in
gpu_buddy_block_trim() unchanged, as it returns -EINVAL and the caller
already observes the failure via the return code.
Cc: Christian König <christian.koenig@amd.com>
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Sanjay Yadav <sanjay.kumar.yadav@intel.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patch.msgid.link/20260227130037.53615-2-sanjay.kumar.yadav@intel.com
xe_gsc_proxy_remove undoes what is done in both xe_gsc_proxy_init and
xe_gsc_proxy_start; however, if we fail between those 2 calls, it is
possible that the HW forcewake access hasn't been initialized yet and so
we hit errors when the cleanup code tries to write GSC register. To
avoid that, split the cleanup in 2 functions so that the HW cleanup is
only called if the HW setup was completed successfully.
Since the HW cleanup (interrupt disabling) is now removed from
xe_gsc_proxy_remove, the cleanup on error paths in xe_gsc_proxy_start
must be updated to disable interrupts before returning.
Fixes: ff6cd29b69 ("drm/xe: Cleanup unwind of gt initialization")
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20260220225308.101469-1-zhanjun.dong@intel.com
drm-misc-next for v7.1:
UAPI Changes:
connector:
- Add panel_type property
fourcc:
- Add ARM interleaved 64k modifier
nouveau:
- Query Z-Cull info with DRM_IOCTL_NOUVEAU_GET_ZCULL_INFO
Cross-subsystem Changes:
coreboot:
- Clean up coreboot framebuffer support
dma-buf:
- Provide revoke mechanism for shared buffers
- Rename move_notify callback to invalidate_mappings and update users.
- Always enable move_notify
- Support dma_fence_was_initialized() test
- Protect dma_fence_ops by RCU and improve locking
- Fix sparse warnings
Core Changes:
atomic:
- Allocate drm_private_state via callback and convert drivers
atomic-helper:
- Use system_percpu_wq
buddy:
- Make buddy allocator available to all DRM drivers
- Document flags and structures
colorop:
- Add destroy helper and convert drivers
fbdev-emulation:
- Clean up
gem:
- Fix drm_gem_objects_lookup() error cleanup
Driver Changes:
amdgpu:
- Set panel_type to OELD for eDP
atmel-hlcdc:
- Support sana5d65 LCD controller
bridge:
- anx7625: Support USB-C plus DT bindings
- connector: Fix EDID detection
- dw-hdmi-qp: Support Vendor-Specfic and SDP Infoframes; improve others
- fsl-ldb: Fix visual artifacts plus related DT property 'enable-termination-resistor'
- imx8qxp-pixel-link: Improve bridge reference handling
- lt9611: Support Port-B-only input plus DT bindings
- tda998x: Support DRM_BRIDGE_ATTACH_NO_CONNECTOR; Clean up
- Support TH1520 HDMI plus DT bindings
- Clean up
imagination:
- Clean up
komeda:
- Fix integer overflow in AFBC checks
mcde:
- Improve bridge handling
nouveau:
- Provide Z-cull info to user space
- gsp: Support GA100
- Shutdown on PCI device shutdown
- Clean up
panel:
- panel-jdi-lt070me05000: Use mipi-dsi multi functions
- panel-edp: Support Add AUO B116XAT04.1 (HW: 1A); Support CMN N116BCL-EAK (C2); Support FriendlyELEC plus DT changes
- Fix Kconfig dependencies
panthor:
- Add tracepoints for power and IRQs
rcar-du:
- dsi: fix VCLK calculation
rockchip:
- vop2: Use drm_ logging functions
- Support DisplayPort on RK3576
sysfb:
- corebootdrm: Support system framebuffer on coreboot firmware; detect orientation
- Clean up pixel-format lookup
sun4i:
- Clean up
tilcdc:
- Use DT bindings scheme
- Use managed DRM interfaces
- Support DRM_BRIDGE_ATTACH_NO_CONNECTOR
- Clean up a lot of obsolete code
v3d:
- Clean up
vc4:
- Use system_percpu_wq
- Clean up
verisilicon:
- Support DC8200 plus DT bindings
virtgpu:
- Support PRIME imports with enabled 3D
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260226143615.GA47200@linux.fritz.box
Pull kvm fixes from Paolo Bonzini:
"Arm:
- Make sure we don't leak any S1POE state from guest to guest when
the feature is supported on the HW, but not enabled on the host
- Propagate the ID registers from the host into non-protected VMs
managed by pKVM, ensuring that the guest sees the intended feature
set
- Drop double kern_hyp_va() from unpin_host_sve_state(), which could
bite us if we were to change kern_hyp_va() to not being idempotent
- Don't leak stage-2 mappings in protected mode
- Correctly align the faulting address when dealing with single page
stage-2 mappings for PAGE_SIZE > 4kB
- Fix detection of virtualisation-capable GICv5 IRS, due to the
maintainer being obviously fat fingered... [his words, not mine]
- Remove duplication of code retrieving the ASID for the purpose of
S1 PT handling
- Fix slightly abusive const-ification in vgic_set_kvm_info()
Generic:
- Remove internal Kconfigs that are now set on all architectures
- Remove per-architecture code to enable KVM_CAP_SYNC_MMU, all
architectures finally enable it in Linux 7.0"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: always define KVM_CAP_SYNC_MMU
KVM: remove CONFIG_KVM_GENERIC_MMU_NOTIFIER
KVM: arm64: Deduplicate ASID retrieval code
irqchip/gic-v5: Fix inversion of IRS_IDR0.virt flag
KVM: arm64: Revert accidental drop of kvm_uninit_stage2_mmu() for non-NV VMs
KVM: arm64: Fix protected mode handling of pages larger than 4kB
KVM: arm64: vgic: Handle const qualifier from gic_kvm_info allocation type
KVM: arm64: Remove redundant kern_hyp_va() in unpin_host_sve_state()
KVM: arm64: Fix ID register initialization for non-protected pKVM guests
KVM: arm64: Optimise away S1POE handling when not supported by host
KVM: arm64: Hide S1POE from guests when not supported by the host
Pull debugobjects fix from Thomas Gleixner:
"A single fix for debugobjects.
The deferred page initialization prevents debug objects from
allocating slab pages until the initialization is complete. That
causes depletion of the pool and disabling of debugobjects.
The reason is that debugobjects uses __GFP_HIGH for allocations as it
might be invoked from arbitrary contexts. When PREEMPT_COUNT is
disabled there is no way to know whether the context is safe to set
__GFP_KSWAPD_RECLAIM.
This worked until v6.18. Since then allocations w/o a reclaim flag
cause new_slab() to end up in alloc_frozen_pages_nolock_noprof(),
which returns early when deferred page initialization has not yet
completed.
Work around that when PREEMPT_COUNT is enabled as the preempt counter
allows debugobjects to add __GFP_KSWAPD_RECLAIM to the GFP flags when
the context is preemtible. When PREEMPT_COUNT is disabled the context
is unknown and the reclaim bit can't be set because the caller might
hold locks which might deadlock in the allocator.
That makes debugobjects depend on PREEMPT_COUNT ||
!DEFERRED_STRUCT_PAGE_INIT, which limits the coverage slightly, but
keeps it functional for most cases"
* tag 'core-debugobjects-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobject: Make it work with deferred page initialization - again
Pull x86 fixes from Ingo Molnar:
- Fix speculative safety in fred_extint()
- Fix __WARN_printf() trap in early_fixup_exception()
- Fix clang-build boot bug for unusual alignments, triggered by
CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B=y
- Replace the final few __ASSEMBLY__ stragglers that snuck in lately
into non-UAPI x86 headers and use __ASSEMBLER__ consistently (again)
* tag 'x86-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/headers: Replace __ASSEMBLY__ stragglers with __ASSEMBLER__
x86/cfi: Fix CFI rewrite for odd alignments
x86/bug: Handle __WARN_printf() trap in early_fixup_exception()
x86/fred: Correct speculative safety in fred_extint()
Pull timer fix from Ingo Molnar:
"Improve the inlining of jiffies_to_msecs() and jiffies_to_usecs(), for
the common HZ=100, 250 or 1000 cases. Only use a function call for odd
HZ values like HZ=300 that generate more code.
The function call overhead showed up in performance tests of the TCP
code"
* tag 'timers-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time/jiffies: Inline jiffies_to_msecs() and jiffies_to_usecs()
Pull scheduler fixes from Ingo Molnar:
- Fix zero_vruntime tracking when there's a single task running
- Fix slice protection logic
- Fix the ->vprot logic for reniced tasks
- Fix lag clamping in mixed slice workloads
- Fix objtool uaccess warning (and bug) in the
!CONFIG_RSEQ_SLICE_EXTENSION case caused by unexpected un-inlining,
which triggers with older compilers
- Fix a comment in the rseq registration rseq_size bound check code
- Fix a legacy RSEQ ABI quirk that handled 32-byte area sizes
differently, which special size we now reached naturally and want to
avoid. The visible ugliness of the new reserved field will be avoided
the next time the RSEQ area is extended.
* tag 'sched-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: slice ext: Ensure rseq feature size differs from original rseq size
rseq: Clarify rseq registration rseq_size bound check comment
sched/core: Fix wakeup_preempt's next_class tracking
rseq: Mark rseq_arm_slice_extension_timer() __always_inline
sched/fair: Fix lag clamp
sched/eevdf: Update se->vprot in reweight_entity()
sched/fair: Only set slice protection at pick time
sched/fair: Fix zero_vruntime tracking
Pull perf events fixes from Ingo Molnar:
- Fix lock ordering bug found by lockdep in perf_event_wakeup()
- Fix uncore counter enumeration on Granite Rapids and Sierra Forest
- Fix perf_mmap() refcount bug found by Syzkaller
- Fix __perf_event_overflow() vs perf_remove_from_context() race
* tag 'perf-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix __perf_event_overflow() vs perf_remove_from_context() race
perf/core: Fix refcount bug and potential UAF in perf_mmap
perf/x86/intel/uncore: Add per-scheduler IMC CAS count events
perf/core: Fix invalid wait context in ctx_sched_in()
Pull locking fix from Ingo Molnar:
"Now that LLVM 22 has been released officially, require a release
version to use the new CONFIG_WARN_CONTEXT_ANALYSIS feature.
In particular this avoids the widely used Android clang 22.0.1
pre-release build which is known to be broken for this usecase"
* tag 'locking-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lib/Kconfig.debug: Require a release version of LLVM 22 for context analysis
Pull irqchip driver fixes from Ingo Molnar:
- Fix frozen interrupt bug in the sifive-plic driver
- Limit per-device MSI interrupts on uncommon gic-v3-its hardware
variants
- Address Sparse warning by constifying a variable in the MMP driver
- Revert broken commit and also fix an error check in the ls-extirq
driver
* tag 'irq-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/ls-extirq: Fix devm_of_iomap() error check
Revert "irqchip/ls-extirq: Use for_each_of_imap_item iterator"
irqchip/mmp: Make icu_irq_chip variable static const
irqchip/gic-v3-its: Limit number of per-device MSIs to the range the ITS supports
irqchip/sifive-plic: Fix frozen interrupt due to affinity setting
Pull SCSI fixes from James Bottomley:
"All changes in drivers (well technically SES is enclosure services,
but its change is minor). The biggest is the write combining change in
lpfc followed by the additional NULL checks in mpi3mr"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Fix shift out of bounds when MAXQ=32
scsi: ufs: core: Move link recovery for hibern8 exit failure to wl_resume
scsi: ufs: core: Fix possible NULL pointer dereference in ufshcd_add_command_trace()
scsi: snic: MAINTAINERS: Update snic maintainers
scsi: snic: Remove unused linkstatus
scsi: pm8001: Fix use-after-free in pm8001_queue_command()
scsi: mpi3mr: Add NULL checks when resetting request and reply queues
scsi: ufs: core: Reset urgent_bkops_lvl to allow runtime PM power mode
scsi: ses: Fix devices attaching to different hosts
scsi: ufs: core: Fix RPMB region size detection for UFS 2.2
scsi: storvsc: Fix scheduling while atomic on PREEMPT_RT
scsi: lpfc: Properly set WC for DPP mapping
Pull bpf fixes from Alexei Starovoitov:
- Fix alignment of arm64 JIT buffer to prevent atomic tearing (Fuad
Tabba)
- Fix invariant violation for single value tnums in the verifier
(Harishankar Vishwanathan, Paul Chaignon)
- Fix a bunch of issues found by ASAN in selftests/bpf (Ihor Solodrai)
- Fix race in devmpa and cpumap on PREEMPT_RT (Jiayuan Chen)
- Fix show_fdinfo of kprobe_multi when cookies are not present (Jiri
Olsa)
- Fix race in freeing special fields in BPF maps to prevent memory
leaks (Kumar Kartikeya Dwivedi)
- Fix OOB read in dmabuf_collector (T.J. Mercier)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (36 commits)
selftests/bpf: Avoid simplification of crafted bounds test
selftests/bpf: Test refinement of single-value tnum
bpf: Improve bounds when tnum has a single possible value
bpf: Introduce tnum_step to step through tnum's members
bpf: Fix race in devmap on PREEMPT_RT
bpf: Fix race in cpumap on PREEMPT_RT
selftests/bpf: Add tests for special fields races
bpf: Retire rcu_trace_implies_rcu_gp() from local storage
bpf: Delay freeing fields in local storage
bpf: Lose const-ness of map in map_check_btf()
bpf: Register dtor for freeing special fields
selftests/bpf: Fix OOB read in dmabuf_collector
selftests/bpf: Fix a memory leak in xdp_flowtable test
bpf: Fix stack-out-of-bounds write in devmap
bpf: Fix kprobe_multi cookies access in show_fdinfo callback
bpf, arm64: Force 8-byte alignment for JIT buffer to prevent atomic tearing
selftests/bpf: Don't override SIGSEGV handler with ASAN
selftests/bpf: Check BPFTOOL env var in detect_bpftool_path()
selftests/bpf: Fix out-of-bounds array access bugs reported by ASAN
selftests/bpf: Fix array bounds warning in jit_disasm_helpers
...
Pull driver core fixes from Danilo Krummrich:
- Do not register imx_clk_scu_driver in imx8qxp_clk_probe(); besides
fixing two other issues, this avoids a deadlock in combination with
commit dc23806a7c ("driver core: enforce device_lock for
driver_match_device()")
- Move secondary node lookup from device_get_next_child_node() to
fwnode_get_next_child_node(); this avoids issues when users switch
from the device API to the fwnode API
- Export io_define_{read,write}!() to avoid unused import warnings when
CONFIG_PCI=n
* tag 'driver-core-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
clk: scu/imx8qxp: do not register driver in probe()
rust: io: macro_export io_define_read!() and io_define_write!()
device property: Allow secondary lookup in fwnode_get_next_child_node()
Pull smb client fixes from Steve French:
- Two multichannel fixes
- Locking fix for superblock flags
- Fix to remove debug message that could log password
- Cleanup fix for setting credentials
* tag 'v7.0rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: Use snprintf in cifs_set_cifscreds
smb: client: Don't log plaintext credentials in cifs_set_cifscreds
smb: client: fix broken multichannel with krb5+signing
smb: client: use atomic_t for mnt_cifs_flags
smb: client: fix cifs_pick_channel when channels are equally loaded
