In smu_v14_0_0_set_soft_freq_limited_range(), the gfxclk floor is
programmed via SetHardMinGfxClk together with SetSoftMaxGfxClk. Under
power_dpm_force_performance_level=high this pins HardMin to peak gfxclk.
In PMFW arbitration HardMin has higher priority than SoftMax, so the
firmware thermal/PPT throttler cannot clamp gfxclk via SoftMax once
HardMin is set to peak. Replace SetHardMinGfxClk with SetSoftMinGfxclk
so the driver still requests peak performance but the firmware
throttler retains the ability to clamp gfxclk under thermal/PPT
pressure. SoftMax handling is unchanged and no other clock domains
are affected.
Signed-off-by: Priya Hosur <Priya.Hosur@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3ea273267f)
Cc: stable@vger.kernel.org
When mapping VRAM pages into the GART page table,
amdgpu_gart_map_vram_range() assumes that the system page size is the
same as the GPU page size.
On systems with non-4K page sizes, multiple GPU pages can exist within
a single CPU page. As a result, the mappings are created incorrectly
because fewer page table entries are programmed than required.
Fix this by programming the mappings correctly for non-4K page size
systems.
Fixes: 237d623ae6 ("drm/amdgpu/gart: Add helper to bind VRAM pages (v2)")
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a8f0bc2238)
Cc: stable@vger.kernel.org
In case when queue_create fails and mqd has already been
allocated and hence wptr_obj is not cleaned up.
So moving that cleanup part to mqd_destroy so it takes
care of all the cases of clean up and during tear down of
the queue.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 43355f62cd)
Use find_next_zero_bit() to locate the next free seq slot bit
instead of the current walk, for more efficient bitmap scanning.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ff905a9b62)
Mesa userqueues free does not wait for the free to complete and go ahead
in unmapping the vital bos while kernel is still in queue free and
corresponding cleanup.
So ideally we don't need the logging for that and hence remove the warn
message as this is expected behaviour and functionally, we are making
sure to wait for the required fences before unmap.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 758a868043)
The v11 MQD manager incorrectly assigned the CP-compute variants of
checkpoint_mqd/restore_mqd for KFD_MQD_TYPE_SDMA queues. These functions
use sizeof(struct v11_compute_mqd) (2048 bytes) instead of sizeof(struct
v11_sdma_mqd) (512 bytes), causing a 1536-byte overflow.
During CRIU checkpoint of an SDMA queue on Navi3x:
- checkpoint_mqd() reads 2048 bytes from a 512-byte SDMA MQD buffer,
leaking 1536 bytes of adjacent GTT memory to userspace
During CRIU restore:
- restore_mqd() writes 2048 bytes into a 512-byte SDMA MQD buffer,
corrupting 1536 bytes of adjacent GTT memory (often the ring buffer
or neighboring MQDs)
This is a copy-paste regression unique to v11. All other ASIC backends
(cik, vi, v9, v10, v12) correctly use the SDMA-specific variants.
Add checkpoint_mqd_sdma() and restore_mqd_sdma() functions that properly
handle the smaller v11_sdma_mqd structure, matching the pattern used in
other MQD managers.
Fixes: cc009e613d ("drm/amdkfd: Add KFD support for soc21 v3")
Assisted-by: Claude:Sonnet 4-5
Signed-off-by: Andrew Martin <andrew.martin@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6fa41db7ff)
Cc: stable@vger.kernel.org
When usr_queue_id_array is NULL and num_queues is non-zero,
get_queue_ids() returns NULL. The callers check only IS_ERR() on the
return value; since IS_ERR(NULL) == false the check passes, and
suspend_queues() calls q_array_invalidate() which immediately
dereferences NULL while iterating num_queues times.
Userspace can trigger this via kfd_ioctl_set_debug_trap() by supplying
num_queues > 0 with a zero queue_array_ptr, causing a kernel panic.
A NULL usr_queue_id_array with num_queues == 0 is a legitimate no-op
(q_array_invalidate never executes, and resume_queues already guards
all queue_ids dereferences behind a NULL check). Return ERR_PTR(-EINVAL)
only when num_queues is non-zero and the pointer is absent; both callers
already propagate IS_ERR() returns correctly to userspace.
Fixes: a70a93fa56 ("drm/amdkfd: add debug suspend and resume process queues operation")
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f165a82cdf)
Cc: stable@vger.kernel.org
Problem:
While developing the amd_close_race IGT test (which intentionally triggers
execute permission faults by removing VM_PAGE_EXECUTABLE from GPU page table
entries), we discovered that on Navi10 (GFX 10.1.x) these faults produce
zero diagnostic output. The GPU simply hangs silently for ~10s until the
scheduler timeout fires. There is no way to distinguish an execute
permission fault from any other type of GPU hang.
Root cause:
GFX 10.1.x defaults to noretry=0, which sets
RETRY_PERMISSION_OR_INVALID_PAGE_FAULT=1 in the GFXHUB UTCL2 registers
(gfxhub_v2_0.c line 313). With this bit set, permission faults (valid PTE,
wrong R/W/X bits) are handled entirely within the UTCL1/UTCL2 hardware
loop: UTCL2 returns an XNACK to UTCL1, and UTCL1 re-requests the
translation indefinitely, expecting software to eventually fix the
permission bits (as happens in SVM/HMM recovery). No interrupt of any kind
reaches the IH ring.
This is different from invalid-page faults (V=0) which DO generate a retry
fault interrupt that the driver can escalate to a no-retry fault. Permission
faults with valid PTEs loop silently forever in hardware.
GFX 10.3+ already defaults to noretry=1, which makes permission faults
generate immediate L2 protection fault interrupts. GFX 10.1.x was
inadvertently left out of this default.
Fix:
Change the noretry=1 threshold from IP_VERSION(10, 3, 0) to
IP_VERSION(10, 1, 0) in amdgpu_gmc_noretry_set(). This is a one-line
change that aligns GFX 10.1.x behavior with GFX 10.3+ and all newer
generations.
With noretry=1, the existing non-retry fault handler
(gmc_v10_0_process_interrupt) already decodes and prints the full
GCVM_L2_PROTECTION_FAULT_STATUS register including PERMISSION_FAULTS,
faulting address, VMID, PASID, and process name. No additional logging
code is needed — the fix is purely routing permission faults to the
existing, fully-capable non-retry interrupt handler.
v2: Dropped GFX10-specific logging from gmc_v10_0.c and
kfd_int_process_v10.c (Felix Kuehling). v1 added logging in the retry
fault handler, but with noretry=1 permission faults take the non-retry
path — the v1 retry handler code was dead and would never execute.
Tested on Navi10 (GFX 10.1.10):
- Execute permission faults now produce immediate, clear output:
[gfxhub] page fault (src_id:0 ring:64 vmid:4 pasid:592)
Process amd_close_race pid 13380 thread amd_close_race pid 13384
in page at address 0x40001000 from client 0x1b (UTCL2)
GCVM_L2_PROTECTION_FAULT_STATUS:0x00700881
PERMISSION_FAULTS: 0x8
- No regressions with properly-mapped GPU workloads
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit eb21edd24c)
Cc: stable@vger.kernel.org
When the fault stop mode isn't AMDGPU_VM_FAULT_STOP_ALWAYS,
these bits should be programmed to 0.
Program CRASH_ON_NO_RETRY_FAULT and CRASH_ON_RETRY_FAULT
always, to make sure to clear the bits when we don't want
to crash.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d0cd99e730)
For PTE creation use asic specific physical page base address mask
v2: Change variable name from pa_mask to pte_addr_mask
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2ea9898859)
SMU messages may use fewer arguments than the available argument registers,
the previous code only wrote used registers and left the rest unchanged,
so stale values from a prior message could persist.
Write all argument registers for each message and zero the unused tail
to keep command arguments deterministic and avoid unintended carry-over.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e03b635f61)
smu_v13_0_0_get_power_limit() and smu_v13_0_7_get_power_limit() mix
runtime power_limit with PP table limits when reporting default/min/max.
When current power limit query succeeds, default_power_limit was set to the
runtime value instead of the PP table default, and min/max could be derived
from inconsistent bases (MsgLimits/runtime), leading to incorrect cap info.
Use SocketPowerLimitAc/Dc as the PP default base (pp_limit), keep
current_power_limit as runtime value, and derive min/max from pp_limit with
OD percentages.
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5227
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1eaf26db95)
Cc: stable@vger.kernel.org
On SMU v13.0.10, sending PrepareMp1ForUnload with the default
parameter may leave the device in an inaccessible state. This can
affect runtime power management and partial PnP flows.
e.g: kexec, driver unload, boco/d3cold.
Pass the required workaround parameter 0x55, when preparing MP1 for
unload on SMU v13.0.10, keep the existing behavior for other SMU
versions.
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5133
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4e8ee1afee)
Cc: stable@vger.kernel.org
If the driver only preempts queues, there can still be inflight waves,
pending dispatch state, or resume/redispatch possibility tied to the
same queue. Then the VM/TTM side may proceed to move/unmap queue related
BOs during evicting userq objects while shader TCP clients still need to
access them.
So for eviction, unmap is safer because it makes the queue nonrunnable
before memory backing is invalidated. Meanwhile, for a idle queue it's
more sutiable for unmapping it rather preempt and unmapping also can
save more processing time than preempt.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d87c9d8672)
wait_on_destroy_queue() drops locks to wait for queue resume, allowing
a concurrent destroy to free the queue. Use is_being_destroyed flag to
serialize destruction.
Reviewed-by: Amir Shetaia <Amir.Shetaia@amd.com>
Signed-off-by: Alysa Liu <Alysa.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ac081deaf1)
[Why & How]
All record-chain walk loops in bios_parser.c and bios_parser2.c use
for(;;) and only terminate on a 0xFF record_type sentinel or zero
record_size. A malformed VBIOS image missing the terminator record
causes unbounded iteration at probe time, potentially hundreds of
thousands of iterations with record_size=1. In the final iterations
near the BIOS image boundary, struct casts beyond the 2-byte header
validated by GET_IMAGE can also read out of bounds.
Cap all 14 record-chain walk loops to BIOS_MAX_NUM_RECORD (256)
iterations. The atombios.h defines up to 22 distinct record types
and atomfirmware.h has 13. Assuming an average of less than 10
records per type (which is reasonable since most are connector-
based) 256 is a generous upper bound.
Fixes: 4562236b3b ("drm/amd/dc: Add dc display driver (v2)")
Assisted-by: Copilot:claude-opus-4.6 Mythos
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 95700a3d66)
Cc: stable@vger.kernel.org
[Why & How]
During HDCP 2.x repeater authentication over HDMI, the driver reads the
sink's RxStatus register and extracts a 10-bit message size field (max
value 1023). This value is used as the read length for the ReceiverID
list without being clamped to the size of the destination buffer
rx_id_list[177]. A malicious HDMI repeater could advertise a message
size larger than the buffer, causing an out-of-bounds write during the
I2C read.
Clamp the read length in mod_hdcp_read_rx_id_list() to the size of the
rx_id_list buffer, matching the approach already used in the DP branch.
Fixes: eff682f83c ("drm/amd/display: Add DDC handles for HDCP2.2")
Assisted-by: Copilot:claude-opus-4.6
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 229212219e)
Cc: stable@vger.kernel.org
[Why & How]
gpio_bitshift is a uint8_t read directly from the VBIOS GPIO pin table.
If the value is >= 32, the expression "1 << gpio_bitshift" triggers
undefined behaviour in C (shift count exceeds type width). On x86 the
shift is silently masked to 5 bits, producing an incorrect GPIO mask
that may cause wrong MMIO register bits to be toggled.
Validate gpio_bitshift before use and return BP_RESULT_BADBIOSTABLE for
out-of-range values.
Fixes: ae79c310b1 ("drm/amd/display: Add DCE12 bios parser support")
Assisted-by: Copilot:claude-opus-4.6
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit eadf438ab8)
Cc: stable@vger.kernel.org
[Why & How]
dal_vector_reserve() computes the allocation size as
"capacity * vector->struct_size" using uint32_t arithmetic, which can
silently wrap to a small value on overflow. This would cause krealloc to
return a smaller buffer than expected, leading to heap overflows on
subsequent vector appends.
Replace krealloc() with krealloc_array() which performs an internal
overflow check and returns NULL on wrap, preventing the issue.
Fixes: 2004f45ef8 ("drm/amd/display: Use kernel alloc/free")
Assisted-by: Copilot:claude-opus-4.6
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3766856864)
Cc: stable@vger.kernel.org
[Why & How]
dp_sdp_message_debugfs_write() dereferences connector->base.state->crtc
without checking for NULL. A connector can be connected but not bound to
any CRTC (e.g. after hot-plug before the next atomic commit), causing a
kernel crash when writing to the sdp_message debugfs node.
The function also ignores the user-provided size argument and always
passes 36 bytes to copy_from_user(), reading past the user buffer when
size < 36.
Fix both issues by:
- Returning -ENODEV when connector->base.state or state->crtc is NULL
- Clamping write_size to min(size, sizeof(data))
Fixes: c7ba3653e9 ("drm/amd/display: Generic SDP message access in amdgpu")
Assisted-by: Copilot:claude-opus-4.6
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6ab4c36a52)
Cc: stable@vger.kernel.org
[Why & How]
The VBIOS integrated info tables (v1_11 and v2_1) contain HdmiRegNum and
Hdmi6GRegNum fields that are used as loop bounds when copying retimer I2C
register settings into fixed-size arrays (dp*_ext_hdmi_reg_settings[9]
and dp*_ext_hdmi_6g_reg_settings[3]). These u8 fields are not validated
before use, so a malformed VBIOS can specify values up to 255, causing an
out-of-bounds heap write during driver probe.
Clamp each register count to the destination array size using min_t()
before the copy loops, in both get_integrated_info_v11() and
get_integrated_info_v2_1().
Assisted-by: GitHub Copilot:claude-opus-4.6
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5a7f0ef901)
Cc: stable@vger.kernel.org
[Why & How]
The aux_rd_interval array in struct dc_lttpr_caps is declared with
MAX_REPEATER_CNT - 1 (7) elements, indexed 0..6. However, the offset
parameter passed to dp_get_eq_aux_rd_interval() can be as large as
MAX_REPEATER_CNT (8) when a sink reports 8 LTTPR repeaters via DPCD.
This leads to an out-of-bounds read of aux_rd_interval[7] when offset
is 8.
Fix this by growing aux_rd_interval to MAX_REPEATER_CNT elements to
accommodate the full range of valid repeater counts defined by the DP
spec.
Assisted-by: GitHub Copilot:Claude claude-4-opus
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a55a458a8d)
Cc: stable@vger.kernel.org
The cpu_id attribute supplied by user space through
UVERBS_ATTR_ALLOC_DMAH_CPU_ID is passed directly to cpumask_test_cpu()
without first verifying that the value is within the valid CPU range.
Passing such untrusted data to cpumask_test_cpu() may lead to an
out-of-bounds read of the underlying cpumask bitmap: the helper expands
to a test_bit() that indexes the bitmap by cpu_id / BITS_PER_LONG with
no bound check.
In addition, on kernels built with CONFIG_DEBUG_PER_CPU_MAPS it trips
the WARN_ON_ONCE() in cpumask_check(); combined with panic_on_warn this
turns a bad user input into a machine reboot.
Reject any cpu_id that is not smaller than nr_cpu_ids with -EINVAL
before it is used.
Reported by Smatch.
Fixes: d83edab562 ("RDMA/core: Introduce a DMAH object and its alloc/free APIs")
Link: https://patch.msgid.link/r/20260525142136.28165-1-yishaih@nvidia.com
Cc: stable@vger.kernel.org
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/ag68qoAW3P04J7pT@stanley.mountain/
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix host controller programming for eMMC fixed driver type
MMC host:
- dw_mmc-rockchip: Add missing private data for very old controllers
- litex_mmc: Fix clock management
- renesas_sdhi: Add OF entry for RZ/G2H SoC
- sdhci: Manage signal voltage switch during system resume for some hosts
- sdhci-of-dwcmshc: Fix reset, clk and SDIO support for Eswin EIC7700"
* tag 'mmc-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci: add signal voltage switch in sdhci_resume_host
mmc: dw_mmc-rockchip: Add missing private data for very old controllers
mmc: litex_mmc: Set mandatory idle clocks before CMD0
mmc: litex_mmc: Use DIV_ROUND_UP for more accurate clock calculation
mmc: renesas_sdhi: Add OF entry for RZ/G2H SoC
mmc: sdhci-of-dwcmshc: Fix reset, clk, and SDIO support for Eswin EIC7700
mmc: core: Fix host controller programming for fixed driver type
Pull cgroup fixes from Tejun Heo:
"One cpuset fix and a maintenance update, both low-risk:
- Fix cpuset partition CPU accounting under sibling CPU exclusion
that could produce wrong CPU assignments and trigger
scheduling-domain warnings. Includes selftests.
- Update an email address in MAINTAINERS"
* tag 'cgroup-for-7.1-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Change Ridong's email
cgroup/cpuset: Add test cases for sibling CPU exclusion on partition update
cgroup/cpuset: Use effective_xcpus in partcmd_update add/del mask calculation
Pull sched_ext fixes from Tejun Heo:
"Two low-risk fixes:
- Drop a spurious warning that can fire during cgroup migration while
a sched_ext scheduler is loaded
- Fix a drgn-based debug script that broke after scheduler state
moved into a per-scheduler struct"
* tag 'sched_ext-for-7.1-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Don't warn on NULL cgrp_moving_from in scx_cgroup_move_task()
tools/sched_ext: Fix scx_show_state per-scheduler state reads
bluetoothd has a bug with makes it send extra bytes as part of
MGMT_OP_ADD_EXT_ADV_DATA which are now being checked to be the
exact the expected length, relax this so only when the expected
length is greater than the data length to cause an error since
that would result in accessing invalid memory, otherwise just
ignore the extra bytes.
Link: https://lore.kernel.org/linux-bluetooth/20260602204749.210857-1-luiz.dentz@gmail.com/T/#u
Fixes: d3f7d17960 ("Bluetooth: MGMT: validate Add Extended Advertising Data length")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
sco_sock_connect() copies the destination address into sco_pi(sk)->dst
under lock_sock(), then releases the lock and calls sco_connect(),
which reads dst, src, setting, and codec without holding lock_sock() in
hci_get_route() and hci_connect_sco().
These fields may be modified concurrently by connect(), bind(), or
setsockopt() on the same socket, resulting in data-races reported by
KCSAN.
Fix this by snapshotting dst, src, setting, and codec under lock_sock()
at the start of sco_connect() before passing them to hci_get_route()
and hci_connect_sco().
BUG: KCSAN: data-race in memcmp+0x45/0xb0
race at unknown origin, with read to 0xffff88800e6b0dd0 of 1 bytes
by task 315 on cpu 0:
memcmp+0x45/0xb0
hci_connect_acl+0x1b7/0x6b0
hci_connect_sco+0x4d/0xb30
sco_sock_connect+0x27b/0xd60
__sys_connect_file+0xbd/0xe0
__sys_connect+0xe0/0x110
__x64_sys_connect+0x40/0x50
x64_sys_call+0xcad/0x1c60
do_syscall_64+0x133/0x590
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: 9a8ec9e8eb ("Bluetooth: SCO: Fix possible circular locking dependency on sco_connect_cfm")
Signed-off-by: SeungJu Cheon <suunj1331@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
iso_connect_bis(), iso_connect_cis(), iso_listen_bis(), and
iso_conn_big_sync() call hci_get_route() using iso_pi(sk)->dst,
iso_pi(sk)->src, and iso_pi(sk)->src_type without holding lock_sock().
These fields may be modified concurrently by connect() or setsockopt()
on the same socket, resulting in data-races reported by KCSAN.
Fix this by snapshotting the required fields under lock_sock() before
calling hci_get_route().
BUG: KCSAN: data-race in memcmp+0x45/0xb0
race at unknown origin, with read to 0xffff8880122135cf of 1 bytes
by task 333 on cpu 1:
memcmp+0x45/0xb0
hci_get_route+0x27e/0x490
iso_connect_cis+0x4c/0xa10
iso_sock_connect+0x60e/0xb30
__sys_connect_file+0xbd/0xe0
__sys_connect+0xe0/0x110
__x64_sys_connect+0x40/0x50
x64_sys_call+0xcad/0x1c60
do_syscall_64+0x133/0x590
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: 241f51931c ("Bluetooth: ISO: Avoid circular locking dependency")
Signed-off-by: SeungJu Cheon <suunj1331@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In iso_sock_rebind_bc(), the bis pointer is cached, then the socket lock is
dropped:
bis = iso_pi(sk)->conn->hcon;
/* Release the socket before lookups since that requires hci_dev_lock
* which shall not be acquired while holding sock_lock for proper
* ordering.
*/
release_sock(sk);
hci_dev_lock(bis->hdev);
During the unlocked window, could a concurrent close() destroy the connection
and free the bis structure, causing hci_dev_lock(bis->hdev) to access memory
after it is freed, fix this by using the hdev reference which was safely
acquired via iso_conn_get_hdev().
Fixes: d3413703d5 ("Bluetooth: ISO: Add support to bind to trigger PAST")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_get_route() returns a reference-counted hci_dev pointer via
hci_dev_hold(). The function exits normally or with an error without ever
releasing it.
Fixes: 07a9342b94 ("Bluetooth: ISO: Send BIG Create Sync via hci_sync")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Early failures in Bluetooth HCI UART configuration leak SRCU percpu
memory.
When device initialization fails before hci_register_dev() completes,
the HCI_UNREGISTER flag is never set. As a result, when the device
reference count reaches zero, bt_host_release() evaluates this flag as
false and falls back to a direct kfree(hdev).
Because hci_release_dev() is bypassed, the SRCU struct initialized
early in hci_alloc_dev() is never cleaned up, resulting in a leak of
percpu memory.
Fix the leak by explicitly calling cleanup_srcu_struct() in the
fallback (unregistered) branch of bt_host_release() before freeing
the device.
Reported-by: syzbot+535ecc844591e50588a5@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=535ecc844591e50588a5
Tested-by: syzbot+535ecc844591e50588a5@syzkaller.appspotmail.com
Fixes: 1d6123102e ("Bluetooth: hci_core: Fix use-after-free in vhci_flush()")
Signed-off-by: Bharath Reddy <kbreddy.rpbc@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
A BNEP peer can send a short BNEP SDU. bnep_rx_frame() reads the
packet type byte immediately and, for control packets, reads the control
opcode and setup UUID-size byte before proving that those bytes are
present. bnep_rx_control() also dereferences the control opcode without
rejecting an empty control payload.
Use skb_pull_data() for the fixed fields in bnep_rx_frame() so a NULL
return gates each dereference. Split the control handler so the frame
path can pass an opcode that has already been pulled, and keep the
byte-buffer wrapper for extension control payloads.
For BNEP_SETUP_CONN_REQ, name the UUID-size byte before pulling the
setup payload. struct bnep_setup_conn_req carries destination and source
service UUIDs after that byte, each uuid_size bytes, so the parser now
documents that tuple explicitly instead of leaving the pull length as an
opaque multiplication.
Validation reproduced this kernel report:
KASAN slab-out-of-bounds in bnep_rx_frame.isra.0+0x130c/0x1790
The buggy address belongs to the object at ffff88800c0f7908 which belongs
to the cache kmalloc-8 of size 8
The buggy address is located 0 bytes to the right of allocated 1-byte
region [ffff88800c0f7908, ffff88800c0f7909)
Read of size 1
Call trace:
dump_stack_lvl+0xb3/0x140 (?:?)
print_address_description+0x57/0x3a0 (?:?)
bnep_rx_frame+0x130c/0x1790 (net/bluetooth/bnep/core.c:306)
print_report+0xb9/0x2b0 (?:?)
__virt_addr_valid+0x1ba/0x3a0 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
kasan_addr_to_slab+0x21/0x60 (?:?)
kasan_report+0xe0/0x110 (?:?)
process_one_work+0xfce/0x17e0 (kernel/workqueue.c:3200)
worker_thread+0x65c/0xe40 (?:?)
__kthread_parkme+0x184/0x230 (?:?)
kthread+0x35e/0x470 (?:?)
_raw_spin_unlock_irq+0x28/0x50 (?:?)
ret_from_fork+0x586/0x870 (?:?)
__switch_to+0x74f/0xdc0 (?:?)
ret_from_fork_asm+0x1a/0x30 (?:?)
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Assisted-by: Codex:gpt-5.5
Signed-off-by: Zhang Cen <rollkingzzc@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Existing advertising instances can already hold the maximum extended
advertising payload. When hci_adv_bcast_annoucement() prepends the
Broadcast Announcement service data to that payload, the combined data
may no longer fit in the temporary buffer used to rebuild the
advertising data.
Reject that case before copying the existing payload and report the
failure through the device log. This keeps the existing advertising
data intact and avoids overrunning the temporary buffer.
Fixes: 5725bc6082 ("Bluetooth: hci_sync: Fix broadcast/PA when using an existing instance")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Assisted-by: Codex:GPT-5.4
Signed-off-by: Yuqi Xu <xuyq21@lenovo.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
net/bluetooth/l2cap_core.c:l2cap_sig_channel() accepts BR/EDR
signaling packets up to the channel MTU and dispatches each command
without enforcing the signaling MTU (MTUsig). A Bluetooth BR/EDR peer
within radio range can send a fixed-channel CID 0x0001 packet that is
larger than MTUsig and contains many L2CAP_ECHO_REQ commands before
pairing. In a real-radio stock-kernel run, one 681-byte signaling
packet containing 168 zero-length ECHO_REQ commands made the target
transmit 168 ECHO_RSP frames over about 220 ms.
Impact: a Bluetooth BR/EDR peer within radio range, before pairing, can
force 168 ECHO_RSP frames from one 681-byte fixed-channel signaling
packet containing packed ECHO_REQ commands.
Define Linux's BR/EDR signaling MTU as the spec minimum of 48 bytes and
reject any larger signaling packet with one L2CAP_COMMAND_REJECT_RSP
carrying L2CAP_REJ_MTU_EXCEEDED before any command is dispatched.
The Bluetooth Core spec wording for MTUExceeded says the reject
identifier shall match the first request command in the packet, and
that packets containing only responses shall be silently discarded.
Linux intentionally deviates from that prescription: silently
discarding desynchronizes the peer because the remote stack never
learns its responses were dropped, and locating the first request
command requires walking command headers past MTUsig, i.e. processing
bytes from a packet we have already decided is too large to process.
We therefore always emit one reject and use the identifier from the
first command header, a single fixed-offset byte read.
The unrestricted BR/EDR signaling parser and ECHO_REQ response path both
trace to the initial git import; no later introducing commit is
available for a Fixes tag.
Cc: stable@vger.kernel.org
Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Link: https://lore.kernel.org/r/20260518002800.1361430-1-michael.bommarito@gmail.com
Link: https://lore.kernel.org/r/20260520135034.1060859-1-michael.bommarito@gmail.com
Link: https://lore.kernel.org/r/20260521000555.3712030-1-michael.bommarito@gmail.com
Assisted-by: Claude:claude-opus-4-7
Assisted-by: Codex:gpt-5-5-xhigh
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The RFCOMM MCC handlers cast skb->data to protocol-specific structs
without validating skb->len first. A malicious remote device can send
truncated MCC frames and trigger out-of-bounds reads in these handlers.
Fix this by using skb_pull_data() to validate and access the required
data before dereferencing it.
rfcomm_recv_rpn() requires special handling since ETSI TS 07.10 allows
1-byte RPN requests. Handle this by validating only the DLCI byte first,
and validating the full struct only when len > 1.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Suggested-by: Muhammad Bilal <meatuni001@gmail.com>
Signed-off-by: SeungJu Cheon <suunj1331@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
tlv_data_is_valid() reads each advertising data field length from
data[i], then inspects data[i + 1] for managed EIR types before
checking that the current field still fits inside the supplied buffer.
A malformed field whose length byte is the last byte of the buffer can
therefore make the parser read one byte past the advertising data.
KASAN reported the following when a malformed MGMT_OP_ADD_ADVERTISING
request reached that path:
BUG: KASAN: vmalloc-out-of-bounds in tlv_data_is_valid()
Read of size 1
Call trace:
tlv_data_is_valid()
add_advertising()
hci_mgmt_cmd()
hci_sock_sendmsg()
Move the existing element-length check before any type-octet inspection
so each non-empty element is proven to contain its type byte before the
parser looks at data[i + 1].
Fixes: 2bb36870e8 ("Bluetooth: Unify advertising instance flags check")
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Zhang Cen <rollkingzzc@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
rfcomm_get_sock_by_channel() scans rfcomm_sk_list under the list lock,
but returns the selected listener after dropping that lock without
taking a reference. rfcomm_connect_ind() then locks the listener,
queues a child socket on it, and may notify it after unlocking it.
The buggy scenario involves two paths, with each column showing the
order within that path:
rfcomm_connect_ind(): listener close:
1. Find parent in 1. close() enters
rfcomm_get_sock_by_channel() rfcomm_sock_release().
2. Drop rfcomm_sk_list.lock 2. rfcomm_sock_shutdown()
without pinning parent. closes the listener.
3. Call lock_sock(parent) and 3. rfcomm_sock_kill()
bt_accept_enqueue(parent, unlinks and puts parent.
sk, true).
4. Read parent flags and may 4. parent can be freed.
call sk_state_change().
If close wins the race, parent can be freed before
rfcomm_connect_ind() reaches lock_sock(), bt_accept_enqueue(), or the
deferred-setup callback.
Take a reference on the listener before leaving rfcomm_sk_list.lock.
After lock_sock() succeeds, recheck that it is still in BT_LISTEN
before queueing a child, cache the deferred-setup bit while the parent
is locked, and drop the reference after the last parent use.
KASAN reported a slab-use-after-free in lock_sock_nested() from
rfcomm_connect_ind(), with the freeing stack going through
rfcomm_sock_kill() and rfcomm_sock_release().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Zhang Cen <rollkingzzc@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Return INVALID_INPUT, not MISSING_INPUT, if the guest provides an unaligned
address for a GUEST_REQUEST, and/or attempts to use the same page for the
source and destination. The inputs are obviously invalid, not missing.
Opportunistically move the checks out of sev_es_validate_vmgexit(), to
continue the march towards reducing the scope of the helper, and to help
guide future changes into correctly handling bad input.
Fixes: 88caf544c9 ("KVM: SEV: Provide support for SNP_GUEST_REQUEST NAE event")
Fixes: 74458e4859 ("KVM: SEV: Provide support for SNP_EXTENDED_GUEST_REQUEST NAE event")
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-22-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20260529183549.1104619-22-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
