cmd_state_init() initializes the command state with memset(0xff),
leaving dma->len at U64_MAX to signal missing setup. The only setter
is NPU_SET_DMA0_LEN; if userspace omits this command and issues
NPU_OP_DMA_START, dma->len remains U64_MAX.
In dma_length(), a positive stride added to U64_MAX wraps to a small
value. With size0 == 1, check_mul_overflow() does not trigger and
dma_length() returns 0 instead of U64_MAX. The caller's U64_MAX check
then passes, region_size[] stays 0, and the bounds check in
ethosu_job.c is bypassed, allowing hardware to execute DMA with stale
physical addresses.
Fix by checking for U64_MAX at the start of dma_length() before any
arithmetic, consistent with the sentinel value used throughout the
driver to detect uninitialized fields.
Fixes: 5a5e9c0228 ("accel: Add Arm Ethos-U NPU driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260524130319.12747-1-meatuni001@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
dma_length() derives DMA region usage from command stream values and
updates region_size[]:
len = ((len + stride[0]) * size0 + stride[1]) * size1
region_size[region] = max(..., len + dma->offset)
Several arithmetic issues can corrupt the derived region size:
- signed stride values may underflow when added to len
- intermediate multiplications may overflow
- len + dma->offset may overflow during region_size updates
- dma_length() error returns were not validated by the caller
region_size[] is later used by ethosu_job.c to validate command stream
accesses against GEM buffer sizes. Arithmetic wraparound can therefore
under-report region usage and bypass the bounds validation.
Fix by validating signed additions, using overflow helpers for
multiplications and offset updates, and propagating dma_length()
failures to the caller.
Fixes: 5a5e9c0228 ("accel: Add Arm Ethos-U NPU driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260524103710.47397-1-meatuni001@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
On non-U65 hardware (e.g. U85), opcode 0x4093 is NPU_SET_WEIGHT2_LENGTH.
The BASE handler for the same opcode correctly assigns to
st.weight[2].base, but the LENGTH handler mistakenly assigns cmds[1]
to st.weight[1].length instead of st.weight[2].length.
This leaves weight[2].length at its initialised sentinel value of
0xffffffff and corrupts weight[1].length with the user-supplied value,
breaking the software bounds-check state for both weight buffers on U85.
Fix the index to match the BASE handler.
Fixes: 5a5e9c0228 ("accel: Add Arm Ethos-U NPU driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260523210840.92039-3-meatuni001@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
NPU_OP_RESIZE is a U85-only command that the driver does not yet
implement. The existing WARN_ON(1) placeholder fires unconditionally
whenever userspace submits this command via DRM_IOCTL_ETHOSU_GEM_CREATE,
causing unbounded kernel log spam.
If panic_on_warn is set the kernel panics, giving any unprivileged user
with access to the DRM device a trivial denial-of-service primitive.
Replace the WARN_ON(1) with an explicit -EINVAL return so the ioctl
rejects the command before it reaches hardware.
Fixes: 5a5e9c0228 ("accel: Add Arm Ethos-U NPU driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260523210840.92039-2-meatuni001@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
NPU_SET_IFM_REGION extracts the region index with param & 0x7f, giving
a maximum value of 127. However region_size[] and output_region[] in
struct ethosu_validated_cmdstream_info are both sized to
NPU_BASEP_REGION_MAX (8), giving valid indices [0..7].
Every other region assignment in the same switch uses param & 0x7:
NPU_SET_OFM_REGION: st.ofm.region = param & 0x7;
NPU_SET_IFM2_REGION: st.ifm2.region = param & 0x7;
NPU_SET_WEIGHT_REGION: st.weight[0].region = param & 0x7;
NPU_SET_SCALE_REGION: st.scale[0].region = param & 0x7;
The 0x7f mask on IFM is inconsistent and appears to be a typo.
feat_matrix_length() and calc_sizes() use the region index directly
as an array subscript into the kzalloc'd info struct:
info->region_size[fm->region] = max(...);
A userspace caller supplying NPU_SET_IFM_REGION with param > 7 causes
a write up to 127*8 = 1016 bytes past the start of region_size[],
corrupting adjacent kernel heap data.
Fix by applying the same & 0x7 mask used by all other region
assignments.
Fixes: 5a5e9c0228 ("accel: Add Arm Ethos-U NPU driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260523195159.55801-1-meatuni001@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter, wireless and Bluetooth.
Current release - fix to a fix:
- Bluetooth: MGMT: fix backward compatibility with bluetoothd
which adds stray bytes to MGMT_OP_ADD_EXT_ADV_DATA
Previous releases - regressions:
- af_unix: fix inq_len update inaccuracy on partial read
- eth: fec: fix pinctrl default state restore order on resume
- wifi: iwlwifi:
- mvm: don't support the reset handshake for old firmwares
- pcie: simplify the resume flow if fast resume is not used,
work around NIC access failures
Previous releases - always broken:
- Bluetooth: L2CAP: reject BR/EDR signaling packets over MTUsig
- sctp: fix a couple of bugs in COOKIE_ECHO processing
- sched: fix pedit partial COW leading to page cache corruption
- wifi: nl80211: reject oversized EMA RNR lists
- netfilter:
- conntrack_irc: fix possible out-of-bounds read
- bridge: make ebt_snat ARP rewrite writable
- appletalk: zero-initialize aarp_entry to prevent heap info leak
- ipv4: restrict IPOPT_SSRR and IPOPT_LSRR options
- mptcp: fix number of bugs reported by AI scans and discovered
during NVMe over MPTCP testing"
* tag 'net-7.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
Reapply "bnxt_en: bring back rtnl_lock() in the bnxt_open() path"
udp: clear skb->dev before running a sockmap verdict
sctp: purge outqueue on stale COOKIE-ECHO handling
bonding: annotate data-races arcound churn variables
net/802/mrp: fix vector attribute parsing in mrp_pdu_parse_vecattr
rtase: Avoid sleeping in get_stats64()
ieee802154: 6lowpan: only accept IPv6 packets in lowpan_xmit()
ipv6: mcast: Fix use-after-free when processing MLD queries
selftests: net: add vxlan vnifilter notification test
vxlan: vnifilter: fix spurious notification on VNI update
vxlan: vnifilter: send notification on VNI add
rtase: Reset TX subqueue when clearing TX ring
octeontx2-af: npc: Fix CPT channel mask in npc_install_flow
dt-bindings: ethernet: eswin: fix hsp-sp-csr backward compatibility
sctp: validate cached peer INIT chunk length in COOKIE_ECHO processing
net/sched: fix pedit partial COW leading to page cache corruption
vsock/vmci: fix sk_ack_backlog leak on failed handshake
net: bonding: fix NULL pointer dereference in bond_do_ioctl()
geneve: fix length used in GRO hint UDP checksum adjustment
net: ethernet: mtk_eth_soc: Fix use-after-free in metadata dst teardown
...
Pull tracing fix from Steven Rostedt:
- Fix CFI violation in probestub function
The probestub is a function to allow tprobes to hook to a tracepoint
to gain access to its parameters.
The function itself is only referenced by the tracepoint structure
which lives in the __tracepoint section. objtool explicitly ignores
that section and when processing functions in the kernel, if it
detects one that has no references it will seal it to have its ENDBR
stripped on boot up.
This means the probstub function will have its ENDBR stripped and if
a tprobe is attached to it with IBT enabled, it will go *boom*.
* tag 'trace-v7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix CFI violation in probestub being called by tprobes
Pull s390 fixes from Alexander Gordeev:
- Enable IOMMUFD and VFIO cdev such that PCI pass-through to
QEMU/KVM can optionally utilize native IOMMUFD
- With HAVE_ARCH_BUG_FORMAT enabled the BUG infrastructure might
misinterpret flags or fault. Fix this by moving the "format"
field emission into __BUG_ENTRY()
- The generic version of _THIS_IP_ is known to be brittle and may
break with current and future GCC and Clang optimizations. Fix
it by overriding _THIS_IP_
* tag 's390-7.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: Implement _THIS_IP_ using inline asm
s390/bug: Always emit format word in __BUG_ENTRY
s390/configs: Enable IOMMUFD and VFIO cdev in defconfigs
This reverts commit 850d9248d2.
This reapplies commit 325eb217e4 ("bnxt_en: bring back rtnl_lock()
in the bnxt_open() path").
Breno reports a lockdep warning in bnxt. During FW reset the driver
may end up calling netif_set_real_num_tx_queues() (if queue count
changes), so calls to bnxt_open() still require rtnl_lock.
net/sched/sch_generic.c:1416 suspicious rcu_dereference_protected() usage!
dev_qdisc_change_real_num_tx+0x54/0xe0
netif_set_real_num_tx_queues+0x4ed/0xa80
__bnxt_open_nic+0x9cb/0x3490
bnxt_open+0x1cb/0x370
bnxt_fw_reset_task+0x80d/0x1e80
process_scheduled_works+0x9c1/0x13b0
The reverted commit was just an optimization / experiment
so let's go back to taking the lock.
Reported-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/ah726OtFX-Qw3U-R@gmail.com
Fixes: 850d9248d2 ("Revert "bnxt_en: bring back rtnl_lock() in the bnxt_open() path"")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260603195845.2574426-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On the UDP receive path skb->dev is repurposed as dev_scratch (the
truesize/state cache set by udp_set_dev_scratch()), through the
union { struct net_device *dev; unsigned long dev_scratch; } in sk_buff.
When a UDP socket is in a sockmap, sk_data_ready is
sk_psock_verdict_data_ready(), which calls udp_read_skb() -> recv_actor()
(sk_psock_verdict_recv) to run the attached SK_SKB verdict program in softirq.
If that program calls a socket-lookup helper (bpf_sk_lookup_tcp/udp,
bpf_skc_lookup_tcp), bpf_skc_lookup() does:
if (skb->dev)
caller_net = dev_net(skb->dev);
skb->dev still holds the dev_scratch value (a non-NULL integer), so dev_net()
dereferences it as a struct net_device * and the kernel takes a general
protection fault on a non-canonical address in softirq:
Oops: general protection fault, probably for non-canonical address 0x1010000800004a0
CPU: 1 UID: 0 PID: 1406 Comm: syz.2.19 Not tainted 7.1.0-rc6 #1 PREEMPT(full)
RIP: 0010:bpf_skc_lookup net/core/filter.c:7033 [inline]
RIP: 0010:bpf_sk_lookup+0x45/0x160 net/core/filter.c:7047
Call Trace:
<IRQ>
bpf_prog_4675cb904b7071f8+0x12e/0x14e
bpf_prog_run_pin_on_cpu+0xc6/0x1f0
sk_psock_verdict_recv+0x1ba/0x350
udp_read_skb+0x31a/0x370
sk_psock_verdict_data_ready+0x2e3/0x600
__udp_enqueue_schedule_skb+0x4c8/0x650
udpv6_queue_rcv_one_skb+0x3ec/0x740
udp6_unicast_rcv_skb+0x11d/0x140
ip6_protocol_deliver_rcu+0x61e/0x950
ip6_input_finish+0xa9/0x150
NF_HOOK+0x286/0x2f0
ip6_input+0x117/0x220
NF_HOOK+0x286/0x2f0
__netif_receive_skb+0x85/0x200
process_backlog+0x374/0x9a0
__napi_poll+0x4f/0x1c0
net_rx_action+0x3b0/0x770
handle_softirqs+0x15a/0x460
do_softirq+0x57/0x80
</IRQ>
The rmem charge that dev_scratch accounted for is released by skb_recv_udp() on
dequeue, just above, so the scratch is dead by the time recv_actor() runs. Clear
skb->dev so bpf_skc_lookup() falls back to sock_net(skb->sk), which
skb_set_owner_sk_safe() set just above.
Fixes: 965b57b469 ("net: Introduce a new proto_ops ->read_skb()")
Cc: stable@vger.kernel.org
Signed-off-by: Sechang Lim <rhkrqnwk98@gmail.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260603162737.697215-1-rhkrqnwk98@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sctp_stream_update() is only invoked when the association is moved into
COOKIE_WAIT during association setup/reconfiguration. In this path, the
outbound stream scheduler state (stream->out_curr) is expected to be
clean, since no user data should have been transmitted yet unless the
state machine has already partially progressed.
However, a corner case exists in sctp_sf_do_5_2_6_stale(): when a
Stale Cookie ERROR is received, the association is rolled back from
COOKIE_ECHOED to COOKIE_WAIT. In this scenario, user data may already
have been queued and even bundled with the COOKIE-ECHO chunk.
During the rollback, sctp_stream_update() frees the old stream table
and installs a new one, but it does not invalidate stream->out_curr.
As a result, out_curr may still point to a freed sctp_stream_out
entry from the previous stream state.
Later, SCTP scheduler dequeue paths (FCFS, RR, PRIO, etc.) rely on
stream->out_curr->ext, which can lead to use-after-free once the old
stream state has been released via sctp_stream_free().
This results in crashes such as (reported by Yuqi):
BUG: KASAN: slab-use-after-free in sctp_sched_fcfs_dequeue+0x13a/0x140
Read of size 8 at addr ff1100004d4d3208 by task mini_poc/9312
CPU: 1 UID: 1001 PID: 9312 Comm: mini_poc Not tainted
7.1.0-rc1-00305-gbd3a4795d574 #5 PREEMPT(full)
sctp_sched_fcfs_dequeue+0x13a/0x140
sctp_outq_flush+0x1603/0x33e0
sctp_do_sm+0x31c9/0x5d30
sctp_assoc_bh_rcv+0x392/0x6f0
sctp_inq_push+0x1db/0x270
sctp_rcv+0x138d/0x3c10
Fix this by fully purging the association outqueue when handling the
Stale Cookie case. This ensures all pending transmit and retransmit
state is dropped, and any scheduler cached pointers are invalidated,
making it safe to rebuild stream state during COOKIE_WAIT restart.
Updating only stream->out_curr would be insufficient, since queued
and retransmittable data would still reference the old stream state and
trigger later use-after-free in dequeue paths.
Fixes: 5bbbbe32a4 ("sctp: introduce stream scheduler foundations")
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Reported-by: Yuqi Xu <xuyq21@lenovo.com>
Reported-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/94318159b9052907a6cbb7256aee8b5f8dfbfccb.1780510304.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These fields are updated asynchronously by the bonding state machine
in ad_churn_machine() while holding bond->mode_lock.
bond_info_show_slave() and bond_fill_slave_info() read them without
bond->mode_lock being held, we need to add READ_ONCE() and
WRITE_ONCE() annotations.
Note that AD_CHURN_MONITOR, AD_CHURN, and AD_NO_CHURN are defined
exclusively in (kernel private) include/net/bond_3ad.h header.
They should be moved to include/uapi/linux/if_bonding.h or userspace
tools will have to hardcode their values.
Fixes: 4916f2e2f3 ("bonding: print churn state via netlink")
Fixes: 14c9551a32 ("bonding: Implement port churn-machine (AD standard 43.4.17).")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260603123514.388226-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In mrp_pdu_parse_vecattr(), vector attribute events are encoded three
per byte and valen tracks the number of events left to process.
The parser decrements valen after processing the first and second events
from each event byte, but not after processing the third one. When valen
is exactly a multiple of three, the loop continues after the last valid
event and consumes the next byte as a new event byte, applying a
spurious event to the MRP applicant state.
Additionally, when valen is zero the parser unconditionally consumes
attrlen bytes as FirstValue and advances the offset, even though per
IEEE 802.1ak a VectorAttribute with only a LeaveAllEvent has valen of
zero and no FirstValue or Vector fields. This corrupts the offset for
subsequent PDU parsing.
Also, when valen exceeds three the loop crosses byte boundaries but
the attribute value is not incremented between the last event of one
byte and the first event of the next. This causes the first event of
the next byte to use the same attribute value as the third event
rather than the next consecutive value.
Decrement valen after processing the third event, skip FirstValue
consumption when valen is zero, and increment the attribute value at
the end of each loop iteration.
Fixes: febf018d22 ("net/802: Implement Multiple Registration Protocol (MRP)")
Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn>
Reported-by: Ao Wang <wangao@seu.edu.cn>
Reported-by: Xuewei Feng <fengxw06@126.com>
Reported-by: Qi Li <qli01@tsinghua.edu.cn>
Reported-by: Ke Xu <xuke@tsinghua.edu.cn>
Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Link: https://patch.msgid.link/20260603060016.21522-1-zhaoyz24@mails.tsinghua.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .ndo_get_stats64 callback must not sleep because it can be
called when reading /proc/net/dev.
rtase_get_stats64() calls rtase_dump_tally_counter(), which polls
the tally counter dump bit with read_poll_timeout(). This may
sleep while waiting for the hardware counter dump to complete.
Use read_poll_timeout_atomic() instead to avoid sleeping in the
get_stats64() path.
Fixes: 0796004899 ("rtase: Implement net_device_ops")
Cc: stable@vger.kernel.org
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Link: https://patch.msgid.link/20260603061816.31356-1-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The aoe driver (or similar) generates a non-IPv6 packet
(e.g., ETH_P_AOE) and queues it for transmission via dev_queue_xmit()
on a 6LoWPAN interface (configured by the user or test case).
Since the packet is not IPv6, the 6LoWPAN header_ops->create function
(lowpan_header_create or header_create) returns early without initializing
the lowpan_addr_info structure in the skb headroom.
In the transmit function (lowpan_xmit), the driver calls lowpan_header
(or setup_header) which unconditionally copies and uses the lowpan_addr_info
from the headroom, which contains uninitialized data.
Fix this by dropping non IPv6 packets.
A similar fix is needed in net/bluetooth/6lowpan.c bt_xmit().
Fixes: 4dc315e267 ("ieee802154: 6lowpan: move transmit functionality")
Reported-by: syzbot+f13c19f75e1097abd116@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6a1fd763.278b5b03.2bcf39.0049.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260603072955.4032221-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When processing an MLD query, a pointer to the multicast group address
is retrieved when initially parsing the packet. This pointer is later
dereferenced without being reloaded despite the fact that the skb header
might have been reallocated following the pskb_may_pull() calls, leading
to a use-after-free [1].
Fix by copying the multicast group address when the packet is initially
parsed.
[1]
BUG: KASAN: slab-use-after-free in __mld_query_work (net/ipv6/mcast.c:1512)
Read of size 8 at addr ffff8881154b8e90 by task kworker/4:1/118
Workqueue: mld mld_query_work
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_address_description.constprop.0 (mm/kasan/report.c:378)
print_report (mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
__mld_query_work (net/ipv6/mcast.c:1512)
mld_query_work (net/ipv6/mcast.c:1563)
process_one_work (kernel/workqueue.c:3314)
worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
</TASK>
[...]
Freed by task 118:
kasan_save_stack (mm/kasan/common.c:57)
kasan_save_track (mm/kasan/common.c:78)
kasan_save_free_info (mm/kasan/generic.c:584)
__kasan_slab_free (mm/kasan/common.c:253 mm/kasan/common.c:285)
kfree (./include/linux/kasan.h:235 mm/slub.c:2689 mm/slub.c:6251 mm/slub.c:6566)
pskb_expand_head (net/core/skbuff.c:2335)
__pskb_pull_tail (net/core/skbuff.c:2878 (discriminator 4))
__mld_query_work (net/ipv6/mcast.c:1495 (discriminator 1))
mld_query_work (net/ipv6/mcast.c:1563)
process_one_work (kernel/workqueue.c:3314)
worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
Fixes: 97300b5fdf ("[MCAST] IPv6: Check packet size when process Multicast")
Reported-by: Leo Lin <leo@depthfirst.com>
Reviewed-by: David Ahern <dahern@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://patch.msgid.link/20260603101811.612594-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andy Roulin says:
====================
vxlan: vnifilter: fix VNI add/update notifications
When a vxlan device has vnifilter enabled, userspace observers
(e.g., bridge monitor vni) miss VNI add events and see spurious
notifications on no-op VNI re-adds.
Patch 1 fixes the missing notification on VNI add: vxlan_vni_add()
guarded the notification on a 'changed' flag that vxlan_vni_update_group()
only sets when a multicast group or remote is supplied, so VNIs added
without a group (e.g., L3 VXLAN) were silently created.
Patch 2 fixes the spurious notification on VNI update: vxlan_vni_update()
tested 'if (changed)' against a bool pointer instead of dereferencing it,
so every re-add produced a notification regardless of whether anything
actually changed.
Patch 3 adds a selftest covering both bugs along with a few related
cases (add with remote, remote update, delete-nonexistent).
====================
Link: https://patch.msgid.link/20260602185138.253265-1-aroulin@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a selftest for VXLAN vnifilter netlink notifications that verifies
RTM_NEWTUNNEL and RTM_DELTUNNEL are sent correctly when VNIs are added,
deleted, or updated, and that no spurious notifications are sent when
a VNI is re-added with the same attributes.
Signed-off-by: Andy Roulin <aroulin@nvidia.com>
Acked-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260602185138.253265-4-aroulin@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a VNI is re-added with the same attributes (e.g. same group or no
group), vxlan_vni_update() sends a spurious RTM_NEWTUNNEL notification
even though nothing changed.
The bug is that 'if (changed)' tests whether the pointer is non-NULL,
not the bool value it points to. Since every caller passes a valid
pointer, the condition is always true and the notification fires
unconditionally.
Fix by dereferencing the pointer: 'if (*changed)'.
Reproducer:
# ip link add vxlan100 type vxlan dstport 4789 local 10.0.0.1 \
nolearning external vnifilter
# ip link set vxlan100 up
# bridge monitor vni &
# bridge vni add vni 1000 dev vxlan100
# bridge vni add vni 1000 dev vxlan100 # spurious notification
Fixes: f9c4bb0b24 ("vxlan: vni filtering support on collect metadata device")
Signed-off-by: Andy Roulin <aroulin@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260602185138.253265-3-aroulin@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a new VNI is added to a vxlan device with vnifilter enabled,
no RTM_NEWTUNNEL notification is sent to userspace. This means
'bridge monitor vni' never shows VNI add events, even though
VNI delete events are reported correctly.
The bug is in vxlan_vni_add(), where the notification is guarded by
'if (changed)'. The 'changed' flag is set by vxlan_vni_update_group()
only when the multicast group or remote IP is modified, but for a
new VNI added without a group (e.g. in L3 VxLAN interface scenarios),
the function returns early without setting changed=true. Since this
is a new VNI, the notification should be sent unconditionally.
The notification is not guarded by the return value of
vxlan_vni_update_group() because, at this point, the VNI has already
been inserted into the hash table and list with no rollback on error.
The VNI will be visible in 'bridge vni show' regardless, so userspace
should be informed. This is consistent with vxlan_vni_del() which also
notifies unconditionally.
The 'if (changed)' guard remains correct in vxlan_vni_update(), which
handles the case where a VNI already exists and is being re-added --
there, we only want to notify if the group/remote actually changed.
Reproducer:
# ip link add vxlan100 type vxlan dstport 4789 local 10.0.0.1 \
nolearning external vnifilter
# ip link set vxlan100 up
# bridge monitor vni &
# bridge vni add vni 1000 dev vxlan100 # no notification
# bridge vni delete vni 1000 dev vxlan100 # notification received
Fixes: f9c4bb0b24 ("vxlan: vni filtering support on collect metadata device")
Reported-by: Chirag Shah <chirag@nvidia.com>
Signed-off-by: Andy Roulin <aroulin@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260602185138.253265-2-aroulin@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rtase_tx_clear() clears the TX ring and resets the ring indexes.
However, the TX queue state and BQL accounting are not reset at
the same time.
This may leave __QUEUE_STATE_STACK_XOFF asserted after
rtase_sw_reset(), preventing new TX packets from being scheduled.
Reset the TX subqueue when clearing the TX ring so the TX queue
state and BQL accounting are restored together.
Fixes: 5a2a2f1524 ("rtase: Implement the rtase_down function")
Cc: stable@vger.kernel.org
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260602114659.12335-1-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a listening SCTP server processes a COOKIE_ECHO chunk, the cached
peer INIT chunk embedded after the cookie is parsed and its parameters
are later walked by sctp_process_init() using sctp_walk_params().
However, the chunk header length of this cached INIT chunk was not
validated against the remaining buffer in the COOKIE_ECHO payload. If
the length field is inflated, the parameter walk can run beyond the
actual received data, leading to out-of-bounds reads and potential
memory corruption during later parameter handling (e.g. STATE_COOKIE
processing and kmemdup() copies).
Add a bounds check in sctp_unpack_cookie() to ensure the cached INIT
chunk length does not exceed the available data in the COOKIE_ECHO
buffer before it is used.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Brian Geffon <bgeffon@google.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/eb60825fa22d6f9e663c7d4dbb69f397b5d34d42.1780362366.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcf_pedit_act() computes the COW range for skb_ensure_writable()
once before the key loop using tcfp_off_max_hint, but the hint does
not account for the runtime header offset added by typed keys. This
can leave part of the write region un-COW'd.
Fix by moving skb_ensure_writable() inside the per-key loop where
the actual write offset is known, and add overflow checking on the
offset arithmetic. For negative offsets (e.g. Ethernet header edits
at ingress), use skb_cow() to COW the headroom instead. Guard
offset_valid() against INT_MIN, where negation is undefined.
Fixes: 8b796475fd ("net/sched: act_pedit: really ensure the skb is writable")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Reported-by: Keenan Dong <keenanat2000@gmail.com>
Reported-by: Han Guidong <2045gemini@gmail.com>
Reported-by: Zhang Cen <rollkingzzc@gmail.com>
Reviewed-by: Han Guidong <2045gemini@gmail.com>
Tested-by: Han Guidong <2045gemini@gmail.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Tested-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Tested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Rajat Gupta <rajat.gupta@oss.qualcomm.com>
Link: https://patch.msgid.link/20260531123221.48732-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Setting up the interface when suspended/resumeing fail on this card.
Adding a reset and delay quirk will eliminate this problem.
usb 1-1: new full-speed USB device number 2 using xhci-hcd
usb 1-1: New USB device found, idVendor=3c20, idProduct=3d21
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: AB13X USB Audio
usb 1-1: Manufacturer: Generic
usb 1-1: SerialNumber: 20210726905926
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/TYUPR06MB62174610061C213260E1A992D2102@TYUPR06MB6217.apcprd06.prod.outlook.com
snd_pcm_drain() uses init_waitqueue_entry which does not clear
entry.prev/next, and add_wait_queue with a conditional
remove_wait_queue that is skipped when to_check is no longer
in the group after concurrent UNLINK. The orphaned wait entry
remains on the unlinked substream sleep queue. On the next
drain iteration, add_wait_queue adds the entry to a new queue
while still linked on the old one, corrupting both lists. A
subsequent wake_up dereferences NULL at the func pointer
(mapped from the spinlock at offset 0 of the misinterpreted
wait_queue_head_t), causing a kernel panic.
Replace init_waitqueue_entry/add_wait_queue/conditional
remove_wait_queue with init_wait_entry/prepare_to_wait/
finish_wait. init_wait_entry clears prev/next via
INIT_LIST_HEAD on each iteration and sets
autoremove_wake_function which auto-removes the entry on
wake-up. finish_wait safely handles both the already-removed
and still-queued cases.
Fixes: 9b1dbd69ba ("ALSA: pcm: fix use-after-free on linked stream runtime in snd_pcm_drain")
Signed-off-by: Ji'an Zhou <eilaimemedsnaimel@gmail.com>
Link: https://patch.msgid.link/20260604142559.3840881-1-eilaimemedsnaimel@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASoC: Fixes for v7.1
There's only one actual fix here, for the TDM configuration on the
Freescale SAI controller, everytihng else is DMI quirks for AMD systems.
One of those is relatively large as it adds a bunch of different structs
but it's all data.
The rvgen parser for LTL stores literal true values in the python
representation (capitalised True), this doesn't build in C.
The Literal class should already handle this case but ASTNode skips its
strigification method and converts the value (true/false) directly.
Fix by delegating ASTNode stringification to the Literal and Variable
classes instead of bypassing them.
Fixes: 97ffa4ce6a ("verification/rvgen: Add support for linear temporal logic")
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260514152055.229162-8-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
After rvgen was refactored to use subparsers, the common options (-a and
-D) were left in the main parser. This meant that they needed to be
called /before/ the subcommand and using them without subcommand was
allowed. This is not the original intent.
rvgen -D "some description" container -n name
Define the options as parent in the subparsers to allow them to be used
from both subcommands together with other options.
rvgen container -n name -D "some description"
Fixes: 5270a0e304 ("verification/dot2k: Replace is_container() hack with subparsers")
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260514152055.229162-7-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
__start_to_invariant_check() and __get_constraint_env() parse the
environment variable's name from sources that have it padded with the
monitor name. This is removed using rstrip(), which is not meant to
strip a substring but rather a set of characters.
Use removesuffix() to actually get rid of the trailing _<monitor name>.
Fixes: a82adadb16 ("verification/rvgen: Add support for Hybrid Automata")
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260601153840.124372-12-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Currently if ikm_setup_trace_instance() fails, the tool returns without
any cleanup, if rv was called with both -t and -r, this means the
reactor is not going to be cleared.
Jump to the cleanup label to restore the reactor if necessary.
Fixes: 6d60f89691 ("tools/rv: Add in-kernel monitor interface")
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260514152055.229162-5-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
When listing monitors within a specific container (rv list <container>),
the tool incorrectly matched monitors if the requested container name
was only a prefix of the actual container (e.g., 'rv list sche' would
incorrectly list monitors from 'sched:').
Fix this by ensuring the container name is an exact match and is
immediately followed by the ':' separator.
Fixes: eba321a16f ("tools/rv: Add support for nested monitors")
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260514152055.229162-3-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
__ikm_find_monitor_name() relies on strstr() to find a monitor by name,
which fails if the target monitor is a substring of a previously listed
monitor.
Fix it by tokenizing the available_monitors file and matching full
tokens instead.
Fixes: eba321a16f ("tools/rv: Add support for nested monitors")
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260514152055.229162-2-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
ikm_fill_monitor_definition() copies monitor name and description with
strncpy(), but does not guarantee NUL termination when source strings are
equal to or longer than the destination buffers.
Clamp copies to sizeof(dst) - 1 and explicitly append '\0' for both fields
to keep them safe for later string operations.
Suggested-by: unknownbbqrx <dev@unknownbbqr.xyz>
Fixes: 6d60f89691 ("tools/rv: Add in-kernel monitor interface")
Link: https://lore.kernel.org/r/20260604120946.90302-2-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
In the SET_GLOBAL ioctl, v3d_perfmon_find() bumps the reference count on
the perfmon it returns, but v3d_perfmon_set_global_ioctl() and
v3d_perfmon_delete() fail to release that reference on several paths:
1. v3d_perfmon_set_global_ioctl() leaks the reference on its error
paths.
2. CLEAR_GLOBAL leaks both the find reference and the reference
previously stashed in v3d->global_perfmon by the SET_GLOBAL ioctl
that configured it.
3. Destroying a perfmon that is the current global perfmon leaks the
reference stashed by the SET_GLOBAL ioctl.
Release each of these references explicitly.
Cc: stable@vger.kernel.org
Fixes: c6eabbab35 ("drm/v3d: Add DRM_IOCTL_V3D_PERFMON_SET_GLOBAL")
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260531-v3d-perfmon-lifetime-v2-1-60ed4485a203@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
In the schedule-disable done path for suspend, we
signal the suspend fence before clearing pending_disable.
That wakeup can let suspend_wait complete and resume be queued
immediately. The resume path may then reach enable_scheduling()
while pending_disable is still set and hit the
!exec_queue_pending_disable(q) assertion.
Fix this by clearing pending_disable before signaling
the suspend fence, so any resumed transition observes a
consistent state.
Fixes: 87651f31ae ("drm/xe/guc_submit: fix race around suspend_pending")
Cc: stable@vger.kernel.org # v7.0+
Signed-off-by: Tangudu Tilak Tirumalesh <tilak.tirumalesh.tangudu@intel.com>
Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20260603065217.3131066-3-tilak.tirumalesh.tangudu@intel.com
(cherry picked from commit 4b1ae138b0e103d753773956a84eebc2edbf62c4)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This reverts commit 8533051ce9.
The idle-skip optimization bypasses GuC suspend, so the GPU may not
perform the context switch that flushes TLB entries for invalidated
userptr VMAs. In LR/preempt-fence VM mode, this can lead to missed TLB
invalidation and page faults during userptr invalidation tests.
Restore unconditional schedule toggling on suspend so the context-switch
TLB flush is always performed.
This optimization will be reintroduced with a fix that does not skip
suspend in LR/preempt-fence VM mode.
Fixes: 8533051ce9 ("drm/xe: Skip exec queue schedule toggle if queue is idle during suspend")
Cc: stable@vger.kernel.org # v7.0+
Suggested-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Signed-off-by: Tangudu Tilak Tirumalesh <tilak.tirumalesh.tangudu@intel.com>
Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20260603065217.3131066-2-tilak.tirumalesh.tangudu@intel.com
(cherry picked from commit 6a1e7934d9a6cf46aecae00a99c2603d1295e170)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
tmigr_handle_remote_cpu() skips timer_expire_remote() when cpu ==
smp_processor_id(), assuming the local softirq path already handled this
CPU's timers.
This assumption is wrong because jiffies can advance after the handling of
the CPU's global timers in run_timer_base(BASE_GLOBAL) and before
tmigr_handle_remote() evaluates the expiry times.
As a consequence a timer which expires after the CPU local timer wheel
advanced and becomes expired in the remote handling is ignored and the
callback is never invoked and removed from the timer wheel.
What's worse is that fetch_next_timer_interrupt_remote() keeps reporting it
as expired, and the event is re-queued with expires == now on each
iteration. The goto-again loop spins indefinitely.
Fix this by calling timer_expire_remote() unconditionally. That's minimal
overhead for the common case as __run_timer_base() returns immediately if
there is nothing to expire in the local wheel.
[ tglx: Amend change log and add a comment ]
Fixes: 7ee9887703 ("timers: Implement the hierarchical pull model")
Reported-by: Alon Kariv <alonka@amazon.com>
Signed-off-by: Amit Matityahu <amitmat@amazon.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260603170139.33628-1-amitmat@amazon.com
When KVM added a lockdep assertion to catch unexpected cases where guest
CPUID lookups are performed in IRQ disabled context, it used
"linux/lockdep.h" for header inclusion even though lockdep.h is a
kernel wide header. Switch to using <linux/lockdep.h>.
Fixes: 9717efbe5b ("KVM: x86: Disallow guest CPUID lookups when IRQs are disabled")
Signed-off-by: Kai Huang <kai.huang@intel.com>
Link: https://patch.msgid.link/20260604011106.315176-1-kai.huang@intel.com
[sean: add Fixes, Kai is too polite :-)]
Signed-off-by: Sean Christopherson <seanjc@google.com>
When vmci_transport_recv_connecting_server() returns an error,
vmci_transport_recv_listen() calls vsock_remove_pending() but never
calls sk_acceptq_removed(). This leaves sk_ack_backlog incremented
permanently.
Repeated handshake failures (malformed packets, queue pair alloc
failure, event subscribe failure) cause sk_ack_backlog to climb
toward sk_max_ack_backlog. Once it reaches the limit the listener
permanently refuses all new connections with -ECONNREFUSED, a
silent denial of service requiring a process restart to recover.
The two existing sk_acceptq_removed() calls in af_vsock.c do not
cover this path: line 764 checks vsock_is_pending() which returns
false after vsock_remove_pending(), and line 1889 is only reached
on successful accept().
Fix by balancing sk_acceptq_added() with sk_acceptq_removed() on
the error path.
Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Cc: stable@vger.kernel.org
Signed-off-by: Raf Dickson <rafdog35@gmail.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260526104356.469928-1-rafdog35@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ASUS Vivobook 18 M1807GA (AMD ACP7.x, PCI 1022:15e2, subsystem
1043:3531) exposes a single Realtek RT721 SDCA codec on SoundWire link 1.
The BIOS reports the ACP audio config flag as 0 (SoundWire mode), so
snd_pci_ps claims the device, brings up the SoundWire managers and
enumerates the RT721 peripheral (sdw:0:1:025d:0721:01); the rt721-sdca
codec driver binds successfully.
No sound card is created, however: acp63_sdw_machine_select() walks
snd_soc_acpi_amd_acp70_sdw_machines[] and finds no entry whose declared
SoundWire peripherals are all present on the bus. The only existing RT721
entry, acp70_rt721_l1u0_tas2783x2_l1u8b, additionally requires two
TAS2783 amplifiers and deliberately exposes the RT721 as jack + DMIC
only. This M1807GA variant has no external amplifiers - the RT721's
internal AIF2 amplifier path drives the speakers - so that entry never
matches and no machine device is registered.
Add a standalone RT721 machine entry for link 1 exposing all three RT721
endpoints (jack/AIF1, speaker amplifier/AIF2, DMIC/AIF3), mirroring the
standalone RT722 configuration. Place it after the TAS2783 combo entry so
platforms that do have the external amplifiers continue to match the more
specific entry first.
ACPI _ADR of the codec: 0x000130025D072101
(link_id=1 version=3 mfg_id=0x025d Realtek part_id=0x0721 class=0x01).
Verified on the hardware: with the entry present the amd_sdw machine
binds, an "amd-soundwire" card is registered exposing the rt721-sdca
AIF1 (SimpleJack) and AIF2 (SmartAmp) PCM devices, and audio plays out
of the built-in speakers.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221282
Signed-off-by: Aleksander Pshenitsyn <brains.fatman@gmail.com>
Link: https://patch.msgid.link/20260531101159.14241-1-brains.fatman@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The MSI Raider A18 HX A9WJG has an internal digital microphone
connected through AMD ACP6x, but this machine does not expose the
AcpDmicConnected ACPI property, so acp_yc_mach does not bind.
Add a DMI quirk for this model.
This was tested on an MSI Raider A18 HX A9WJG with board MS-182L,
BIOS E182LAMS.31A, AMD ACP6x rev 0x62, and Realtek ALC274. After
applying the quirk, the internal microphone appears as an acp6x DMIC
capture device and records correctly.
Signed-off-by: David Glushkov <david.glushkov@sntiq.com>
Link: https://patch.msgid.link/20260531214512.170716-1-david.glushkov@sntiq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When configuring 32 slots TDM (channels == slots == 32), the xMR
(Mask Register) write used:
~0UL - ((1 << min(channels, slots)) - 1)
The literal "1" is a signed 32-bit int. Shifting it by 32 positions is
undefined behaviour which may set this register to 0xFFFFFFFF, masking
all 32 slots.
Use GENMASK_U32() macro instead. For 32 slots this produces a zero mask:
~GENMASK_U32(31, 0) = ~0xFFFFFFFF = 0x00000000
Behaviour for fewer than 32 slots is unchanged.
Fixes: 770f58d7d2 ("ASoC: fsl_sai: Support multiple data channel enable bits")
Cc: stable@vger.kernel.org
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://patch.msgid.link/20260601083327.1535185-1-chancel.liu@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In bond_do_ioctl(), slave_dev is obtained via __dev_get_by_name() which
can return NULL if the requested interface name does not exist. However,
the subsequent slave_dbg() call is placed before the NULL check:
slave_dev = __dev_get_by_name(net, ifr->ifr_slave);
slave_dbg(bond_dev, slave_dev, "slave_dev=%p:\n", slave_dev); //here
if (!slave_dev)
return -ENODEV;
The slave_dbg() macro expands to netdev_dbg(bond_dev, "(slave %s): " fmt,
(slave_dev)->name, ...) which unconditionally dereferences slave_dev->name
before the NULL check is performed. This results in a NULL pointer
dereference kernel oops when a user calls bonding ioctl (e.g.
SIOCBONDENSLAVE, SIOCBONDRELEASE, etc.) with a non-existent slave
interface name.
This is reachable from userspace via the bonding ioctl interface with
CAP_NET_ADMIN capability, making it a potential local denial-of-service
vector.
Fix by moving the slave_dbg() call after the NULL check.
Fixes: e2a7420df2 ("bonding/main: convert to using slave printk macros")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: ZhaoJinming <zhaojinming@uniontech.com>
Link: https://patch.msgid.link/20260601085649.4029067-1-zhaojinming@uniontech.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The probestub is a function to allow tprobes to hook to a tracepoint to
gain access to its parameters. The function itself is only referenced by
the tracepoint structure which lives in the __tracepoint section. objtool
explicitly ignores that section and when processing functions in the
kernel, if it detects one that has no references it will seal it to have
its ENDBR stripped on boot up.
This means when a tprobe is attached to the sched_wakeup tracepoint, when it
is triggered it will call __probestub_sched_wakeup and due to the missing
ENDBR on a CFI-enabled machine it will take a #CP exception.
Fix this by adding CFI_NOSEAL annotation to probestub declaration.
Cc: stable@vger.kernel.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://patch.msgid.link/20260603153147.573589-1-eva.kurchatova@virtuozzo.com
Fixes: d5173f7537 ("objtool: Exclude __tracepoints data from ENDBR checks")
Signed-off-by: Eva Kurchatova <eva.kurchatova@virtuozzo.com>
[ Updated change log ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
A bug was reported where the parsing of multi-character short options,
be it a short option with an argument specified without space (e.g.
"-p100") or multiple short options in one argument (e.g. -un), ignores
options specific to individual tools.
Furthermore, if the rest of the option is supposed to be an argument, it
gets reinterpreted as a string of options. For example, -p100 gets
interpreted as -100, which is due to hackish implementation read as
--no-thread --no-irq --no-irq with timerlat hist, causing rtla to error
out:
$ rtla timerlat hist -p100
no-irq and no-thread set, there is nothing to do here
This behavior is caused by getopt_long() being called twice on each
argument, once in common_parse_options(), once in [tool]_parse_args():
- common_parse_options() calls getopt_long() with an array of options
common for all rtla tools, while suppressing errors (opterr = 0).
- If the option fails to parse, common_parse_options() returns 0.
- If 0 is returned from common_parse_options(), [tool]_parse_args()
calls getopt_long() again, with its own set of options.
* [tool] means one of {osnoise,timerlat}_{top,hist}
At least in glibc, getopt_long() increments its internal nextchar
variable even if the option is not recognized. That means that in the
case of "-p100", common_parse_options() sets nextchar pointing to '1',
and timerlat_hist_parse_args() sees '1', not 'p'; the same then repeats
for the first and second '0'.
As there is no way to restore the correct internal state of
getopt_long() reliably, fix the issue by merging the common options back
to the longopt array and option string of the [tool]_parse_args()
functions using a macro; only the switch part is left in the original
function, which is renamed to set_common_option().
Fixes: 850cd24cb6 ("tools/rtla: Add common_parse_options()")
Reported-by: John Kacur <jkacur@redhat.com>
Tested-by: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/r/20260602125506.3325345-1-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
