QCOMTEE fix for v7.1
Adding a missing va_end in early return qcomtee_object_user_init()
* tag 'qcomtee-fix-for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tee: qcomtee: add missing va_end in early return qcomtee_object_user_init()
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
OP-TEE fix for v7.1
Prevent possible use after free in supplicant communication.
* tag 'optee-fix-for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tee: optee: prevent use-after-free when the client exits before the supplicant
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Address several teardown issues and resource leaks in the driver's remove
path and error handling:
1. Debounce clock reference leak: The debounce clock (bank->db_clk) is
obtained using of_clk_get() which increments the clock's reference
count, but clk_put() is never called. Register a devm action to
cleanly release it on unbind. Note that of_clk_get(..., 1) remains
necessary over devm_clk_get() because the DT binding does not define
clock-names, precluding name-based lookup.
2. Unregistered chained IRQ handler: The chained IRQ handler is not
disconnected in remove(). If a stray interrupt fires after the driver
is removed, the kernel attempts to execute a stale handler, leading
to a panic. Fix this by clearing the handler in remove().
3. IRQ domain leak: The linear IRQ domain and its generic chips are
allocated manually during probe but never removed. Remove the IRQ
domain during driver teardown to free the associated generic chips
and mappings.
Fixes: 936ee2675e ("gpio/rockchip: add driver for rockchip gpio")
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Marco Scardovi <scardracs@disroot.org>
Link: https://patch.msgid.link/20260526171050.12785-3-scardracs@disroot.org
[Bartosz: don't emit an error message on devres allocation failure]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The bank->clk was previously obtained via of_clk_get() and manually
prepared/enabled. However, it was missing a corresponding clk_put() in
both the error paths and the remove function, leading to a reference leak.
Convert the allocation to devm_clk_get_enabled(), which also properly
propagates failures from clk_prepare_enable() that were previously ignored.
The GPIO bank device uses the same OF node as the previous of_clk_get()
call, so devm_clk_get_enabled(dev, NULL) correctly resolves the same
clock provider entry.
Fix the reference leak and simplify the code by removing the manual
clk_disable_unprepare() calls in the probe error paths and in the
remove function.
Fixes: 936ee2675e ("gpio/rockchip: add driver for rockchip gpio")
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Marco Scardovi <scardracs@disroot.org>
Link: https://patch.msgid.link/20260526171050.12785-2-scardracs@disroot.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
If *ppos is non-zero (user-space write split over multiple calls to
write()) then simple_write_to_buffer() won't initialize the start of the
buffer. Really, non-zero values for *ppos aren't going to work at all.
Check for that and return -EINVAL at the start of the function.
Fixes: 91581c4b3f ("gpio: virtuser: new virtual testing driver for the GPIO API")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://patch.msgid.link/ahP3BJWWy-m_qI0X@stanley.mountain
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
By the time gpio_device_teardown_shared() is called, the parent device
is gone from the global list of GPIO devices and all outstanding SRCU
read-side critical sections have completed. That means that no
concurrent gpio_find_and_request() can call
gpio_shared_add_proxy_lookup() for this device at this time. There's
also no risk of the parent device being re-bound to the driver before
the unbinding completes (including the child devices).
Lockdep produces a false-positive report about a possible circular
dependency as it doesn't know the ordering guarantee. Not taking the
ref->lock in gpio_device_teardown_shared() silences it and is safe to do.
Cc: stable@vger.kernel.org
Fixes: ea513dd3c0 ("gpio: shared: make locking more fine-grained")
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260522-gpio-shared-deadlock-v1-2-76bca088f8c0@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Commit 710abda580 ("gpio: shared: call gpio_chip::of_xlate() if set")
used the mutex embedded in struct gpio_shared_entry to protect the
offset field which now can be modified after assignment. The critical
section however is too wide and introduced a potential deadlock on the
removal of the shared GPIO proxy's parent.
Make the critical section shorter - only protect the offset when it's
being read.
While at it: mention the fact that the entry lock is now also used to
protect against concurrent access to the offset field in the structure's
documentation.
Cc: stable@vger.kernel.org
Fixes: 710abda580 ("gpio: shared: call gpio_chip::of_xlate() if set")
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260522-gpio-shared-deadlock-v1-1-76bca088f8c0@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
TEE fixes for v7.1
Fixing:
- params_from_user() cleanup in error path in tee_ioctl_supp_recv()
- possible tee_shm leak in error path in register_shm_helper()
- padding in struct tee_ioctl_object_invoke_arg
* tag 'tee-fixes-for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tee: fix params_from_user() error path in tee_ioctl_supp_recv
tee: shm: fix shm leak in register_shm_helper()
tee: fix tee_ioctl_object_invoke_arg padding
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The kvm_mmu_rmaps_stat_show() function implements a logarithmic histogram
to collect statistics on the distribution of pte_list_count sizes. However,
it currently uses ffs() (Find First Set), which looks for the least
significant set bit.
Using ffs() leads to severe statistical distortion for any count that is
not a power of two. For example, if a rmap has a pte_list_count of 6
(binary 0110), ffs(6) returns 2, forcing this entry to be erroneously
counted towards the bucket representing a count of 2. In contrast, it
conceptually belongs to the bucket spanning the 4 to 7 range.
Replace ffs() with fls() (Find Last Set) to correctly identify the most
significant set bit (effectively computing floor(log2(count)) + 1). This Ensure
that intermediate counts are correctly categorized into their appropriate
power-of-two order-of-magnitude buckets rather than being severely
under-reported.
Fixes: 3bcd0662d6 ("KVM: X86: Introduce mmu_rmaps_stat per-vm debugfs file")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Link: https://patch.msgid.link/20260528124043.2153-1-lirongqing@baidu.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Before resetting or closing the device, protocol counters should also be
zeroed.
Fixes: d0b137062b ("Bluetooth: hci_sync: Rework init stages")
Signed-off-by: Heitor Alves de Siqueira <halves@igalia.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since hci_dev_close_sync() can now be called during the reset path, we
should also set HCI_CMD_DRAIN_WORKQUEUE. This avoids queuing timeouts
while the hdev workqueue is being drained.
Fixes: 877afadad2 ("Bluetooth: When HCI work queue is drained, only queue chained work")
Signed-off-by: Heitor Alves de Siqueira <halves@igalia.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The current HCI reset function in hci_core.c duplicates most of the work
done by hci_dev_close_sync(), and doesn't handle LE, advertising or
discovery.
Instead of porting these to hci_dev_do_reset(), directly call the
close/open functions from hci_sync to reset the hdev. MGMT now notifies
when a user performs a reset.
Suggested-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Heitor Alves de Siqueira <halves@igalia.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
iso_sock_close() calls iso_sock_clear_timer() before acquiring
lock_sock(sk).
iso_sock_clear_timer() reads iso_pi(sk)->conn twice without the
socket lock held:
if (!iso_pi(sk)->conn)
return;
cancel_delayed_work(&iso_pi(sk)->conn->timeout_work);
Concurrently, iso_conn_del() executes under lock_sock(sk) and calls
iso_chan_del(), which sets iso_pi(sk)->conn to NULL and may result in
the final reference to the connection being dropped:
CPU0 CPU1
---- ----
iso_sock_clear_timer()
if (conn != NULL) ... lock_sock(sk)
iso_chan_del()
iso_pi(sk)->conn = NULL
cancel_delayed_work(conn) /* NULL deref or UAF */
iso_pi(sk)->conn is not stable across the unlock window, causing a
NULL pointer dereference or use-after-free.
Serialize iso_sock_clear_timer() with the socket lock by moving it
inside lock_sock()/release_sock(), matching the pattern used in
iso_conn_del() and all other call sites.
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
iso_recv_frame reads conn->sk under iso_conn_lock but releases the lock
before using sk, with no reference held. A concurrent iso_sock_kill()
can free sk in that window, causing use-after-free on sk->sk_state and
sock_queue_rcv_skb().
Fix by replacing the bare pointer read with iso_sock_hold(conn), which
calls sock_hold() while the spinlock is held, atomically elevating the
refcount before the lock drops. Add a drop_put label so sock_put() is
called on all exit paths where the hold succeeded.
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If dcid is received for an already-assigned destination CID the spec
requires that both channels to be discarded, but calling l2cap_chan_del
may invalidate the tmp cursor created by list_for_each_entry_safe and
in fact it is the wrong procedure as the chan->dcid may be assigned
previously it really needs to be disconnected.
Calling l2cap_chan_clone directly may still lead to l2cap_chan_del so
instead schedule l2cap_chan_timeout with delay 0 to close the channel
asynchronously.
Fixes: 15f02b9105 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_ecred_reconf_rsp() returns early on success without clearing
chan->ident. Every other L2CAP response handler (l2cap_ecred_conn_rsp,
l2cap_le_connect_rsp, l2cap_config_rsp) clears chan->ident after a
successful transaction to prevent the channel from matching subsequent
responses with the recycled ident value.
A remote attacker that completed a reconfiguration as the peer can
replay a failure response with the stale ident, causing the kernel to
match and destroy the already-established channel via
l2cap_chan_del(chan, ECONNRESET).
Clear chan->ident for all matching channels on success, and harden the
failure path by using l2cap_chan_hold_unless_zero() consistent with
other L2CAP handlers (l2cap_le_command_rej, __l2cap_get_chan_by_ident).
Fixes: 15f02b9105 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Zhenghang Xiao <kipreyyy@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
spi_mem_supports_op() accepts a const struct spi_mem_op pointer but
casts away const internally to call spi_mem_adjust_op_freq(). This
mutates the caller's op template, which causes stale max_freq values
when callers reuse persistent templates - subsequent calls won't
re-apply the device frequency cap since spi_mem_adjust_op_freq()
skips non-zero values.
Fix by operating on a stack-local copy instead.
Fixes: a4f8e70d75 ("spi: spi-mem: add spi_mem_adjust_op_freq() in spi_mem_supports_op()")
Cc: Tianyu Xu <xtydtc@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260527173736.2243004-1-s-k6@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The conversion to qnx6_get_folio() in commit b2aa61556f
("qnx6: Convert qnx6_get_page() to qnx6_get_folio()")
introduced a regression in directory iteration. The pointer 'de'
and the 'limit' address were calculated using byte offsets from
a char pointer without scaling by the size of a QNX6 directory
entry.
This causes the driver to read from incorrect memory offsets,
leading to "invalid direntry size" errors and premature
termination of directory scans.
Fix this by casting 'kaddr' to 'struct qnx6_dir_entry *' before
applying the offset and last_entry(...) increments. This allows the
compiler to correctly scale the pointer arithmetic by the 32-byte
stride of the directory entry structure.
Fixes: b2aa61556f ("qnx6: Convert qnx6_get_page() to qnx6_get_folio()")
Cc: stable@vger.kernel.org
Signed-off-by: Arpith Kalaginanavoor <arpithk@nvidia.com>
Link: https://patch.msgid.link/20260526123858.1683035-1-arpithk@nvidia.com
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
atomic_create() in fs/namei.c drops the reference to the dentry
when it returns an error.
This behaviour was imported into dentry_create() so that it
will drop the reference if an error is returned from atomic_create(),
though not if vfs_create() returns an error (in the case where
->atomic_create is not supported).
The caller - nfsd4_create_file() - is made aware of this by checking
path->dentry, which will either be a counted reference to a dentry, or
an error pointer.
However the change to use start_creating()/end_creating() (which landed
shortly before the dentry_create() change landed, though was likely
developed around the same time) means that nfsd4_create_file() *needs* a
valid dentry so that it can unlock the parent.
The net result is that if NFSD exports a filesystem which uses
->atomic_create, and if a call to ->atomic_create returns an error, then
nfsd4_create_file() will pass an error pointer to end_creating()
and the parent will not be unlocked.
Fix this by changing dentry_create() to make sure path->dentry is always
a valid dentry, never an error-pointer. The actual error is already
returned a different way.
Note that if ->atomic_create() returns a different dentry (which may not
be possible in practice) we are guaranteed (because it is only ever
provided by d_spliace_alias()) that it will have the same d_parent and
so it will have the same effect when passed to end_creating().
Fixes: 64a989dbd1 ("VFS/knfsd: Teach dentry_create() to use atomic_open()")
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://patch.msgid.link/177969022571.3379282.16448744624428323496@noble.neil.brown.name
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Benjamin Coddington <bcodding@hammerspace.com>
Reviewed-by: Jori Koolstra <jkoolstra@xs4all.nl>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Ivan Vecera says:
====================
dpll: zl3073x: various fixes
Three fixes for the zl3073x DPLL driver.
Patch 1 exports __dpll_device_change_ntf() for use by drivers that
need to send device change notifications from within callbacks
already running under dpll_lock.
Patch 2 replaces the change_work workqueue mechanism with direct
calls to __dpll_device_change_ntf(), eliminating a race condition
where the work handler could dereference a freed dpll_dev pointer
during device teardown.
Patch 3 moves the freq_monitor flag from per-DPLL to per-device
scope to match the hardware behavior where frequency measurement
registers are shared across all DPLL channels.
====================
Link: https://patch.msgid.link/20260526074525.1451008-1-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The frequency monitoring feature uses shared hardware registers
that measure input reference frequencies independently of
individual DPLL channels. However, the freq_monitor flag was
incorrectly placed in the per-DPLL structure, causing each
channel to track its own enable/disable state independently.
Since the DPLL core calls measured_freq_get() only for the first
pin registration, the measured_freq_check() in the periodic worker
was gated by the per-DPLL freq_monitor flag of whichever channel
happens to be checked. If the first DPLL channel had frequency
monitoring disabled while another had it enabled, measurements
were never reported.
Move freq_monitor from struct zl3073x_dpll to struct zl3073x_dev
so all DPLL channels share a single flag, matching the hardware
behavior. Update freq_monitor_set() to notify other DPLL devices
about the change (like phase_offset_avg_factor_set() already does)
and remove the mode-dependent guard in zl3073x_dpll_changes_check()
since all input pin monitoring (pin state, phase offset, FFO, and
measured frequency) works correctly in all DPLL modes.
Fixes: bfc923b642 ("dpll: zl3073x: implement frequency monitoring")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260526074525.1451008-4-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The change_work was introduced to send device change notifications
from DPLL device callbacks without deadlocking on dpll_lock, since
the callbacks are already invoked under that lock. Now that
__dpll_device_change_ntf() is exported for callers that already
hold dpll_lock, use it directly and remove the change_work
infrastructure entirely.
This eliminates a race condition where change_work could be
re-scheduled after cancel_work_sync() during device teardown,
potentially causing the handler to dereference a freed or NULL
dpll_dev pointer.
Fixes: 9363b48376 ("dpll: zl3073x: Allow to configure phase offset averaging factor")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260526074525.1451008-3-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Export __dpll_device_change_ntf() so that drivers can send device
change notifications from within device callbacks, which are already
called under dpll_lock. Using dpll_device_change_ntf() in that
context would deadlock.
Add lockdep_assert_held() to catch misuse without the lock held.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260526074525.1451008-2-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Vasant has a long history of providing valuable feedback and testing
results for the AMD IOMMU code. Still, too often he gets not Cc'ed on
code changes, so make his reviewer status official.
Acked-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
ASoC: Fixes for v7.1
This round of fixes is mostly Sirini's Qualcomm cleanups that have been
in review for a while, we also have a couple of small fixes from Cássio.
Chuck Lever says:
====================
net/handshake: anchor request lifetime to a pinned file reference
handshake_nl_accept_doit() has accumulated four follow-on fixes
since 3b3009ea8a ("net/handshake: Create a NETLINK service for
handling handshake requests"): 7ea9c1ec66, 7798b59409,
fe67b063f6, and dabac51b81. Each was a local refcount or
NULL-check correction; none moved where the file reference is
owned, and the same code keeps producing the same class of bug.
Reworking the ownership is what breaks the pattern.
For the duration of a request, sock->file has no single owner.
Submit publishes the request without taking a file reference;
accept_doit acquires one inside the handler, after the request
has already left the pending list. The consumer can drop its
own reference at any time, including the moment between
handshake_req_next() popping the request and accept_doit
reaching get_file(). The submit-side sock_hold() pins only
struct sock; struct socket and sock->file remain under the
consumer's control via the file descriptor.
This series places the file reference under unambiguous
ownership. handshake_req_submit() pins it on the request and
completion or cancel drops it (patches 4-5); the submit-side
sock_hold() then becomes redundant, and dropping it also closes
a publish-before-pin race the late sock_hold itself opened
(patch 6). The handshake_complete() API and its consumers move
to a uniform negative-errno sign convention (patch 3), with the
matching sign correction in nvme-tcp (patch 2). Patch 1
hardens hn_lock for BH context, the netns-exit drain fix
builds on the new file-pin infrastructure (patch 8), and new
KUnit file-count assertions verify the refcount contract
(patch 7).
Three things in this restructuring want a careful look. In
handshake_complete(), the fput() of the request's file
reference has to come after hp_done() -- fput() can transitively
run handshake_sk_destruct() and free the request, so the patch
stashes hr_file in a local first. handshake_sk_destruct()
itself is kept on purpose: it owns rhashtable removal and
kfree, and remains the backstop if a consumer path bypasses
handshake_complete() entirely. Third, handshake_req_next() now
returns its request with an extra get_file() held under
hn_lock; accept_doit must consume that reference (FD_PREPARE on
success, explicit fput on the fdf.err path), and any future
caller has to honor the same contract.
v2: https://patch.msgid.link/20260521-handshake-file-pin-v2-0-b9dadc472840@oracle.com
v1: https://patch.msgid.link/20260518-handshake-file-pin-v1-0-4bbcb7e62fda@oracle.com
====================
Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-0-66c616906ead@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The arguments to list_splice_init() in handshake_net_exit() are
reversed. The call moves the local empty "requests" list onto
hn->hn_requests, leaving the local list empty, so the subsequent
drain loop runs zero iterations. Pending handshake requests that
had not yet been accepted are not torn down when the net namespace
is destroyed; each one keeps a reference on a socket file and on
the handshake_req allocation.
Pass the source and destination in the documented order
(list_splice_init(list, head) moves list onto head) so the pending
list is transferred to the local scratch list and drained through
handshake_complete().
Fixing the splice direction exposes a list-corruption race. After
the splice each req->hr_list still has non-empty link pointers,
threading the stack-local scratch list rather than hn_requests.
A concurrent handshake_req_cancel() -- for example, from sunrpc's
TLS timeout on a kernel socket whose netns reference was not
taken -- finds the request through the rhashtable, calls
remove_pending(), and sees !list_empty(&req->hr_list).
__remove_pending_locked() then list_del_init()s an entry off the
scratch list while the drain iterates, corrupting it. The same
call arriving after the drain loop has run list_del() on an
entry hits LIST_POISON instead.
Have remove_pending() check HANDSHAKE_F_NET_DRAINING under
hn_lock and report not-found when drain is in progress. The
drain has already taken ownership; handshake_complete()'s existing
test_and_set on HANDSHAKE_F_REQ_COMPLETED still arbitrates
between drain and cancel for who calls the consumer's hp_done. Use
list_del_init() rather than list_del() in the drain so req->hr_list
does not carry LIST_POISON after drain releases the entry.
The DRAINING guard in remove_pending() makes cancel return false,
but cancel still falls through to test_and_set_bit on
HANDSHAKE_F_REQ_COMPLETED and drops the request's hr_file reference.
Without another pin, if that is the last reference, sk_destruct frees
the request while it is still linked on the drain loop's local list.
Pin each request's hr_file under hn_lock before releasing the list,
and drop that drain pin after the loop finishes with the request.
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-8-66c616906ead@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The new file-reference contract on struct handshake_req is silently
breakable: a missing get_file() at submit or a missing fput() on an
error path leaves the file leaked but does not crash the test, so
the existing absence-of-crash checks pass either way.
Snapshot file_count(filp) before each handshake_req_submit() in
the submit-success, EAGAIN, EBUSY, and cancel tests, and assert
the expected balance after submit and again after cancel. The
already-completed cancel test also asserts the post-complete
balance, which pins down that handshake_complete() drops the
reference and that the subsequent cancel does not double-fput.
The destroy test gets the same treatment before __fput_sync(),
which double-checks that cancel's fput() ran and the only
remaining reference is the one sock_alloc_file() established.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-7-66c616906ead@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
handshake_req_submit() publishes the request via
handshake_req_hash_add() and __add_pending_locked(), drops
hn_lock, and calls handshake_genl_notify() (which can sleep)
before taking sock_hold() on req->hr_sk. A fast tlshd ACCEPT
followed by DONE can drive handshake_complete()'s sock_put()
into the window between the spin_unlock and the late
sock_hold(); on a system where the consumer's fd held the
only sk reference, the late sock_hold() then operates on an
sk whose refcount has reached zero.
The preceding two patches install an explicit file reference
on struct handshake_req. That file pins sock->file, which
pins the embedded struct socket, which defers inet_release()'s
sock_put(). As long as hr_file is held, sk cannot reach refcount
zero from the consumer side, and the submit-side sock_hold()
with its matching sock_put() calls in handshake_complete() and
handshake_req_cancel() is now redundant.
Drop all three. The file reference already keeps each request's
socket alive, and the lifetime story is contained in a single
get_file()/fput() pair.
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-6-66c616906ead@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
handshake_req_next() removes the request from the per-net
pending list and drops hn_lock before handshake_nl_accept_doit()
reads req->hr_sk->sk_socket and dereferences sock->file (once in
FD_PREPARE() and again in get_file()). In that window a
consumer running tls_handshake_cancel() followed by sockfd_put()
(svc_sock_free) or __fput_sync() (xs_reset_transport) releases
sock->file. sock_release() then runs sock_orphan(), zeroing
sk_socket, and frees the struct socket. The accept-side code
either reads NULL through sk_socket or chases freed memory.
The submit-side sock_hold() does not prevent this. sk_refcnt
protects struct sock, but struct socket and sock->file are
independently refcounted via the file descriptor the consumer
owns. Pinning sk leaves sock and sock->file unprotected.
Retarget the accept-side dereferences at req->hr_file, which was
pinned at submit time, instead of req->hr_sk->sk_socket->file.
Pinning on its own is not sufficient: a consumer that cancels
between handshake_req_next() returning and accept_doit reaching
FD_PREPARE() takes the !remove_pending() branch in
handshake_req_cancel() and drops hr_file before the accept side
takes its own reference. Hand off an additional file reference
inside handshake_req_next(), under hn_lock, so the accept side
operates on a reference that no concurrent handshake_req_cancel()
can revoke. FD_PREPARE() consumes that handed-off reference,
either by transferring it to the new fd in fd_publish() or by
dropping it in the cleanup destructor on error; the explicit
get_file() that previously balanced FD_PREPARE() is therefore
redundant and goes away.
Update handshake_req_cancel_test2 and _test3 to simulate the
FD_PREPARE() consumption with an fput() so the kunit file-count
assertions stay balanced.
Reported-by: Chris Mason <clm@meta.com>
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-5-66c616906ead@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
handshake_nl_accept_doit() needs the file pointer backing
req->hr_sk->sk_socket to survive the window between
handshake_req_next() and the subsequent FD_PREPARE() and get_file().
The submit-side sock_hold() does not provide that. sk_refcnt keeps
struct sock alive, but struct socket is owned by sock->file: when
the consumer fputs the last file reference, sock_release() tears
the socket down regardless of any sock_hold.
Add an hr_file pointer to struct handshake_req and acquire an
explicit reference on sock->file during handshake_req_submit().
handshake_complete() and handshake_req_cancel() release the
reference on the completion-bit-winning path.
The submit error path must also release the file reference, but
after rhashtable insertion a concurrent handshake_req_cancel() can
discover the request and race the error path. Gate the error-path
cleanup -- sk_destruct restoration, fput, and request destruction
-- with test_and_set_bit(HANDSHAKE_F_REQ_COMPLETED), the same
serialization handshake_complete() and handshake_req_cancel()
already use. When cancel has already claimed ownership, the submit
error path returns without touching the request; socket teardown
handles final destruction.
The accept-side dereferences are not yet retargeted; that change
comes in the next patch.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-4-66c616906ead@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
handshake_complete() declares status as unsigned int and
tls_handshake_done() negates that value (-status) before handing
it to the TLS consumer. Consumers match on negative errno
constants -- xs_tls_handshake_done() has
switch (status) {
case 0:
case -EACCES:
case -ETIMEDOUT:
lower_transport->xprt_err = status;
break;
default:
lower_transport->xprt_err = -EACCES;
}
so the API as designed expects callers to pass positive errno
values that the tlshd shim then negates.
Three internal callers in handshake_nl_accept_doit(), the
net-exit drain, and a kunit test follow kernel convention and
pass negative errnos -- -EIO, -ETIMEDOUT, -ETIMEDOUT. The
implicit conversion to unsigned int turns -ETIMEDOUT into
0xFFFFFF92; the subsequent -status in tls_handshake_done()
wraps back to 110, the consumer's switch falls through, and
the xprt reports -EACCES on what should be -ETIMEDOUT or -EIO.
Fix the API rather than the call sites. The natural kernel
convention is negative errno in, negative errno out. Change
handshake_complete() and hp_done to take int status, drop the
negation in tls_handshake_done(), and negate once in
handshake_nl_done_doit() where status arrives from the wire
as an unsigned netlink attribute. The three internal callers
were already correct under that convention and need no change.
At the same wire boundary, declare MAX_ERRNO as the netlink
policy upper bound for HANDSHAKE_A_DONE_STATUS. Attribute
validation rejects out-of-range values before
handshake_nl_done_doit() runs, and negating a bounded u32 there
stays within int range -- closing the UBSAN-visible signed-
integer overflow that an unconstrained u32 would invoke.
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-3-66c616906ead@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
nvme_tcp_tls_done() assigns queue->tls_err in three branches. The
ENOKEY lookup failure and the EOPNOTSUPP initializer both store
negative errnos. The third branch, reached when the handshake
layer reports a non-zero status, stores -status.
The handshake layer delivers status to the consumer callback as a
negative errno; the other in-tree consumers --
xs_tls_handshake_done() and the nvmet target callback -- treat
their status argument that way. The extra negation in
nvme_tcp_tls_done() flips the sign, leaving tls_err as a positive
value (for instance, +EIO), which nvme_tcp_start_tls() then
returns to its caller.
Drop the extra negation so queue->tls_err uniformly carries a
negative errno on failure.
Fixes: be8e82caa6 ("nvme-tcp: enable TLS handshake upcall")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-2-66c616906ead@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
nvmet_tcp_state_change(), a socket callback that runs in BH context,
can reach handshake_req_cancel() via nvmet_tcp_schedule_release_queue()
and tls_handshake_cancel(). handshake_req_cancel() acquires
hn->hn_lock with plain spin_lock(). If a process-context thread on
the same CPU holds hn->hn_lock when a softirq invokes the cancel path,
the lock attempt deadlocks. This is the only caller that invokes
tls_handshake_cancel() from BH context; every other consumer calls it
from process context.
Deferring the cancel to process context in the NVMe target is not
straightforward: nvmet_tcp_schedule_release_queue() must call
tls_handshake_cancel() atomically with its state transition to
DISCONNECTING. If the cancel were deferred, the handshake completion
callback could fire in the window before the cancel runs, observe the
unexpected state, and return without dropping its kref on the queue.
Reworking that interlock is considerably more invasive than hardening
the handshake lock. Convert all hn->hn_lock acquisitions from
spin_lock/spin_unlock to spin_lock_bh/spin_unlock_bh so the lock is
never taken with softirqs enabled.
Fixes: 675b453e02 ("nvmet-tcp: enable TLS handshake upcall")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-1-66c616906ead@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
pskb_carve_inside_header() and pskb_carve_inside_nonlinear() both copy
the old skb_shared_info header into a new buffer via memcpy(), which
includes the destructor_arg pointer (uarg) for MSG_ZEROCOPY skbs.
Neither function calls net_zcopy_get() for the new shinfo, creating an
unaccounted holder: every skb_shared_info with destructor_arg set will
call skb_zcopy_clear() once when freed, but the corresponding
net_zcopy_get() was never called for the new copy. Repeated calls
drive uarg->refcnt to zero prematurely, freeing ubuf_info_msgzc while
TX skbs still hold live destructor_arg pointers.
KASAN reports use-after-free on a freed ubuf_info_msgzc:
BUG: KASAN: slab-use-after-free in skb_release_data+0x77b/0x810
Read of size 8 at addr ffff88801574d3e8 by task poc/220
Call Trace:
skb_release_data+0x77b/0x810
kfree_skb_list_reason+0x13e/0x610
skb_release_data+0x4cd/0x810
sk_skb_reason_drop+0xf3/0x340
skb_queue_purge_reason+0x282/0x440
rds_tcp_inc_free+0x1e/0x30
rds_recvmsg+0x354/0x1780
__sys_recvmsg+0xdf/0x180
Allocated by task 219:
msg_zerocopy_realloc+0x157/0x7b0
tcp_sendmsg_locked+0x2892/0x3ba0
Freed by task 219:
ip_recv_error+0x74a/0xb10
tcp_recvmsg+0x475/0x530
The skb consuming the late access still referenced the same uarg via
shinfo->destructor_arg copied by pskb_carve_inside_nonlinear() without
a refcount bump. This has been verified to be reliably exploitable: a
working proof-of-concept achieves full root privilege escalation from
an unprivileged local user on a default kernel configuration.
The fix follows the pattern of pskb_expand_head() which has the same
memcpy/cloned structure. For pskb_carve_inside_header(), net_zcopy_get()
is placed after skb_orphan_frags() succeeds, so the orphan error path
needs no cleanup. For pskb_carve_inside_nonlinear(), net_zcopy_get() is
placed after all failure points and just before skb_release_data(), so
no error path needs cleanup at all -- matching pskb_expand_head() more
closely and avoiding the need for a balancing net_zcopy_put().
Fixes: 6fa01ccd88 ("skbuff: Add pskb_extract() helper function")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Minh Nguyen <minhnguyen.080505@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260526041240.329462-1-minhnguyen.080505@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jijie Shao says:
====================
hibmcge: fix RX packet corruption issue
This series fixes an RX packet corruption issue observed when SMMU is
disabled on the hibmcge driver. The fixes include disabling PCI Relaxed
Ordering and correcting the order of DMA barrier operations in the RX
data sync path.
====================
Link: https://patch.msgid.link/20260525144525.94884-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The dma_rmb() barrier was placed before dma_sync_single_for_cpu(), which
is incorrect. DMA sync must complete first to make the buffer accessible
to the CPU, then the rmb barrier ensures subsequent descriptor reads
observe the latest data written by the hardware.
Reorder the operations so dma_sync_single_for_cpu() is called before
dma_rmb() to guarantee the driver reads consistent data from the DMA
buffer.
Fixes: f72e255940 ("net: hibmcge: Implement rx_poll function to receive packets")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20260525144525.94884-3-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When SMMU is disabled, the hibmcge driver may receive corrupted packets.
The hardware writes packet data and descriptors to the same page, but
with Relaxed Ordering enabled, PCI write transactions may not be
strictly ordered. This can cause the driver to observe a valid
descriptor before the corresponding packet data is fully written.
Fix this by clearing PCI_EXP_DEVCTL_RELAX_EN in the PCI bridge control
register to ensure strict write ordering between packet data and
descriptors.
Fixes: f72e255940 ("net: hibmcge: Implement rx_poll function to receive packets")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20260525144525.94884-2-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jamal Hadi Salim says:
====================
net/sched: Fix packet loops in mirred and netem
This patchset adds a 2-bit per-skb tc_depth counter that travels with
the packet. The existing per-CPU mirred nest tracking loses state
when a packet is deferred through the backlog or moves between CPUs
via XPS/RPS. A per-skb field covers both cases.
Patch 1 adds the tc_depth field in a padding hole in sk_buff.
Patches 2-3 revert the check_netem_in_tree() fix and its tests,
which broke legitimate multi-netem configurations.
Patch 4 uses tc_depth to stop netem duplicate recursion.
Patch 5 uses tc_depth to catch mirred ingress redirect loops.
Patch 6 fixes the infinite loop in the mirred egress blockcast case.
Patch 7 fixes drop stats in early return error scenarios in tcf_mirred_act
for redirect (caught by Sashiko [1]).
Patches 8-9 add mirred and netem test cases.
[1] https://sashiko.dev/#/patchset/20260413082027.2244884-1-hxzene%40gmail.com
====================
Link: https://patch.msgid.link/20260525122556.973584-1-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
tcf_mirred_act() checks sched_mirred_nest against MIRRED_NEST_LIMIT (4)
to prevent deep recursion. However, when the action uses blockcast
(tcfm_blockid != 0), the function returns at the tcf_blockcast() call
BEFORE reaching the counter increment. As a result, the recursion
counter never advances and the limit check is entirely bypassed.
When two devices share a TC egress block with a mirred blockcast rule,
a packet egressing on device A is mirrored to device B via blockcast;
device B's egress TC re-enters tcf_mirred_act() via blockcast and
mirrors back to A, creating an unbounded recursion loop:
tcf_mirred_act -> tcf_blockcast -> tcf_mirred_to_dev -> dev_queue_xmit
-> sch_handle_egress -> tcf_classify -> tcf_mirred_act -> (repeat)
This recursion continues until the kernel stack overflows.
The bug is reachable from an unprivileged user via
unshare(CLONE_NEWUSER | CLONE_NEWNET): user namespaces grant
CAP_NET_ADMIN in the new network namespace, which is sufficient to
create dummy devices, attach clsact qdiscs with shared blocks, and
install mirred blockcast filters.
BUG: TASK stack guard page was hit at ffffc90000b7fff8
Oops: stack guard page: 0000 [#1] SMP KASAN NOPTI
CPU: 2 UID: 1000 PID: 169 Comm: poc Not tainted 7.0.0-rc7-next-20260410
RIP: 0010:xas_find+0x17/0x480
Call Trace:
xa_find+0x17b/0x1d0
tcf_mirred_act+0x640/0x1060
tcf_action_exec+0x400/0x530
basic_classify+0x128/0x1d0
tcf_classify+0xd83/0x1150
tc_run+0x328/0x620
__dev_queue_xmit+0x797/0x3100
tcf_mirred_to_dev+0x7b1/0xf70
tcf_mirred_act+0x68a/0x1060
[repeating ~30+ times until stack overflow]
Kernel panic - not syncing: Fatal exception in interrupt
Fix this by incrementing sched_mirred_nest before calling
tcf_blockcast() and decrementing it on return, mirroring the
non-blockcast path. This ensures subsequent recursive entries see the
updated counter and are correctly limited by MIRRED_NEST_LIMIT.
Fixes: fe946a751d ("net/sched: act_mirred: add loop detection")
Signed-off-by: Kito Xu (veritas501) <hxzene@gmail.com>
Link: https://patch.msgid.link/20260525122556.973584-7-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When mirred redirects to ingress (from either ingress or egress) the loop
state from sched_mirred_dev array dev is lost because of 1) the packet
deferral into the backlog and 2) the fact the sched_mirred_dev array is
cleared. In such cases, if there was a loop we won't discover it.
Here's a simple test to reproduce:
ip a add dev port0 10.10.10.11/24
tc qdisc add dev port0 clsact
tc filter add dev port0 egress protocol ip \
prio 10 matchall action mirred ingress redirect dev port1
tc qdisc add dev port1 clsact
tc filter add dev port1 ingress protocol ip \
prio 10 matchall action mirred egress redirect dev port0
ping -c 1 -W0.01 10.10.10.10
Fixes: fe946a751d ("net/sched: act_mirred: add loop detection")
Tested-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260525122556.973584-6-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
