Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter, wireless and Bluetooth.
Current release - fix to a fix:
- Bluetooth: MGMT: fix backward compatibility with bluetoothd
which adds stray bytes to MGMT_OP_ADD_EXT_ADV_DATA
Previous releases - regressions:
- af_unix: fix inq_len update inaccuracy on partial read
- eth: fec: fix pinctrl default state restore order on resume
- wifi: iwlwifi:
- mvm: don't support the reset handshake for old firmwares
- pcie: simplify the resume flow if fast resume is not used,
work around NIC access failures
Previous releases - always broken:
- Bluetooth: L2CAP: reject BR/EDR signaling packets over MTUsig
- sctp: fix a couple of bugs in COOKIE_ECHO processing
- sched: fix pedit partial COW leading to page cache corruption
- wifi: nl80211: reject oversized EMA RNR lists
- netfilter:
- conntrack_irc: fix possible out-of-bounds read
- bridge: make ebt_snat ARP rewrite writable
- appletalk: zero-initialize aarp_entry to prevent heap info leak
- ipv4: restrict IPOPT_SSRR and IPOPT_LSRR options
- mptcp: fix number of bugs reported by AI scans and discovered
during NVMe over MPTCP testing"
* tag 'net-7.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
Reapply "bnxt_en: bring back rtnl_lock() in the bnxt_open() path"
udp: clear skb->dev before running a sockmap verdict
sctp: purge outqueue on stale COOKIE-ECHO handling
bonding: annotate data-races arcound churn variables
net/802/mrp: fix vector attribute parsing in mrp_pdu_parse_vecattr
rtase: Avoid sleeping in get_stats64()
ieee802154: 6lowpan: only accept IPv6 packets in lowpan_xmit()
ipv6: mcast: Fix use-after-free when processing MLD queries
selftests: net: add vxlan vnifilter notification test
vxlan: vnifilter: fix spurious notification on VNI update
vxlan: vnifilter: send notification on VNI add
rtase: Reset TX subqueue when clearing TX ring
octeontx2-af: npc: Fix CPT channel mask in npc_install_flow
dt-bindings: ethernet: eswin: fix hsp-sp-csr backward compatibility
sctp: validate cached peer INIT chunk length in COOKIE_ECHO processing
net/sched: fix pedit partial COW leading to page cache corruption
vsock/vmci: fix sk_ack_backlog leak on failed handshake
net: bonding: fix NULL pointer dereference in bond_do_ioctl()
geneve: fix length used in GRO hint UDP checksum adjustment
net: ethernet: mtk_eth_soc: Fix use-after-free in metadata dst teardown
...
Pull SoC fixes from Arnd Bergmann:
"Following the previous set of fixes, this addresses another
significant number of small issues found in firmware drivers (tee,
optee, qcomtee, qcom ice, exynos acpm) drivers through various tools.
This is about error handling, resource leaks, concurrency and a
use-after-free bug.
The fixes for the Qualcomm ICE driver also introduce interface changes
in the UFS and MMC drivers using it.
Outside of firmware drivers, there are a few fixes across the tree:
- Minor driver code mistakes in the Atmel EBI memory controller, the
i.MX soc ID driver and socfpga boot logic
- A defconfig change to avoid a boot time regression on multiple
qualcomm boards
- Device tree fixes for qualcomm, at91 and gemini, addressing mostly
minor configuration mistakes"
* tag 'soc-fixes-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (28 commits)
firmware: samsung: acpm: Fix infinite loop on sequence number exhaustion
firmware: samsung: acpm: Fix missing LKMM barriers in sequence allocator
firmware: samsung: acpm: Fix false timeouts and Use-After-Free in polling
ARM: dts: gemini: Fix partition offsets
ARM: socfpga: Fix OF node refcount leak in SMP setup
soc: qcom: ice: Fix the error code when 'qcom,ice' property is not found
arm64: dts: qcom: eliza: Add power-domain and iface clk for ice node
arm64: dts: qcom: milos: Add power-domain and iface clk for ice node
tee: qcomtee: add missing va_end in early return qcomtee_object_user_init()
tee: fix params_from_user() error path in tee_ioctl_supp_recv
tee: shm: fix shm leak in register_shm_helper()
tee: fix tee_ioctl_object_invoke_arg padding
arm64: defconfig: Enable PCI M.2 power sequencing driver
scsi: ufs: ufs-qcom: Remove NULL check from devm_of_qcom_ice_get()
mmc: sdhci-msm: Remove NULL check from devm_of_qcom_ice_get()
soc: qcom: ice: Return proper error codes from devm_of_qcom_ice_get() instead of NULL
soc: qcom: ice: Return -ENODEV if the ICE platform device is not found
soc: qcom: ice: Fix race between qcom_ice_probe() and of_qcom_ice_get()
ARM: dts: microchip: sam9x7: fix GMAC clock configuration
firmware: samsung: acpm: Fix mailbox channel leak on probe error
...
Pull USB and Thunderbolt fixes from Greg KH:
"Here is a set of USB fixes and new device ids for 7.1-rc6. Nothing
major in here, just lots of tiny fixes for reported issues found by
users and some older patches found by some scanning tools. Included in
here are:
- typec fixes found by fuzzers that have decided to finally look at
that device interaction path (i.e. before a driver is bound to a
device)
- typec fixes for issues found by users
- thunderbolt driver fixes for reported problems
- cdns3 driver fixes
- dwc3 driver fixes
- new device quirks added
- usb serial driver fixes for broken devices
- other small driver fixes
All of these have been in linux-next for over a week with no reported
issues"
* tag 'usb-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (54 commits)
USB: serial: cypress_m8: validate interrupt packet headers
USB: serial: safe_serial: fix memory corruption with small endpoint
USB: serial: omninet: fix memory corruption with small endpoint
USB: serial: mxuport: fix memory corruption with small endpoint
USB: serial: cypress_m8: fix memory corruption with small endpoint
USB: cdc-acm: Fix bit overlap and move quirk definitions to header
usb: dwc2: Fix use after free in debug code
usb: chipidea: core: convert ci_role_switch to local variable
usb: gadget: f_fs: serialize DMABUF cancel against request completion
usb: gadget: f_fs: copy only received bytes on short ep0 read
usb: gadget: dummy_hcd: Reject hub port requests for non-existent ports
dt-bindings: usb: Fix EIC7700 USB reset's issue
usbip: vudc: Fix use after free bug in vudc_remove due to race condition
dt-bindings: usb: ti,omap4-musb: Drop duplicate 'usb-phy' property constraints
usb: storage: Add quirks for PNY Elite Portable SSD
USB: quirks: add NO_LPM for Lenovo ThinkPad USB-C Dock Gen2 hub controllers
usb: usbtmc: reject interrupt endpoints with small wMaxPacketSize
usb: usbtmc: check URB actual_length for interrupt-IN notifications
xhci: tegra: Fix ghost USB device on dual-role port unplug
usb: gadget: uvc: hold opts->lock across XU walks in uvc_function_bind
...
Qualcomm driver fixes for v7.1
The Qualcomm ICE driver suffers from race conditions between probe() and
get() and will in certain cases return the wrong error code, which
results in storage drivers failing to probe. Fix these issues.
Also correct the DeviceTree binding, to ensure that relevant clocks are
described and voted for, to prevent the driver from accessing unclocked
hardware during boot.
* tag 'qcom-drivers-fixes-for-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: ice: Fix the error code when 'qcom,ice' property is not found
scsi: ufs: ufs-qcom: Remove NULL check from devm_of_qcom_ice_get()
mmc: sdhci-msm: Remove NULL check from devm_of_qcom_ice_get()
soc: qcom: ice: Return proper error codes from devm_of_qcom_ice_get() instead of NULL
soc: qcom: ice: Return -ENODEV if the ICE platform device is not found
soc: qcom: ice: Fix race between qcom_ice_probe() and of_qcom_ice_get()
soc: qcom: ice: Allow explicit votes on 'iface' clock for ICE
dt-bindings: crypto: qcom,ice: Fix missing power-domain and iface clk
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull drm fixes from Dave Airlie:
"Regular fixes pull, amdgpu/xe being the usual, with bonus msm content
to bulk things out, otherwise it has the usual scattered changes, with
amdxdna dropping a badly thought out userspace api.
gem:
- clean up LRU locking
msm:
- Core:
- Fixed bindings for SM8650, SM8750 and Eliza
- Don't use UTS_RELEASE directly
- Fix typo in clock-names property
- DPU:
- Fixed CWB description on Kaanapali
- Fixed scanline strides for YUV UBWC formats
- Stopped DSI register dumping to access past the end of region
- DSI:
- Fix dumping unaligned regions
- GPU:
- Fix GMEM_BASE for a6xx gen3
- Fix userspace reachable crash on a2xx-a4xx
- Fix sysprof_active for counter collection with IFPC enabled GPUs
- Fix shrinker lockdep
amdgpu:
- Userq fixes
- VPE fix
- SMU 15 fix
- Misc fixes
- VCE fixes
- DC bios parsing fixes
- DC aux fix
- Mode1 reset fix
- RAS fixes
amdkfd:
- Misc fixes
radeon:
- CS parser fix
xe:
- SRIOV related fixes
- Fix leak and double-free
- Multi-cast register fixes
- Multi-queue fix
i915:
- Fix joiner color pipeline selection [display]
- Fix readback for target_rr in Adaptive Sync SDP [dp]
- Apply Intel DPCD workaround when SDP on prior line used [psr]
amdxdna:
- remove mmap and export for ubuf
bridge:
- chipone-icn6211: managed bridge cleanup
- lt66121: acquire reset GPIO
- megachips: fix clean up on failed IRQ requests
v3d:
- fix UAF in error code paths
- release GEM-object ref on free'd jobs
virtio:
- use uninterruptible resv locking in plane updates
mediatek:
- fix sparse warnings"
* tag 'drm-fixes-2026-05-23' of https://gitlab.freedesktop.org/drm/kernel: (78 commits)
drm/xe/oa: Fix exec_queue leak on width check in stream open
drm/virtio: use uninterruptible resv lock for plane updates
drm/amdgpu: fix handling in amdgpu_userq_create
drm/radeon/evergreen_cs: Add missing NULL prefix check in surface check
drm/amdgpu: userq_va_mapped should remain true once done
drm/amdgpu: avoid integer overflow in VA range check
drm/amd/ras: Fix UMC error address allocation leak
drm/amdgpu: unmap all user mappings of framebuffer and doorbell before mode1 reset
drm/amd/display: Validate payload length and link_index in dc_process_dmub_aux_transfer_async
drm/amd/display: Validate GPIO pin LUT table size before iterating
drm/amd/display: Fix integer overflow in bios_get_image()
drm/amdkfd: Check bounds for allocate_sdma_queue restore_sdma_id
drm/amdgpu: use atomic operation to achieve lockless serialization
drm/amdkfd: Check bounds on allocate_doorbell
drm/amdgpu/vce3: Fix VCE 3 firmware size and offsets
drm/amdgpu/vce2: Fix VCE 2 firmware size and offsets
drm/amdgpu/vce1: Stop using amdgpu_vce_resume
drm/amdgpu/vce1: Fix VCE 1 firmware size and offsets
drm/amdgpu/vce1: Don't repeat GTT MGR node allocation
drm/amdgpu/vce1: Check if VRAM address is lower than GART.
...
Pull spi fixes from Mark Brown:
"Another batch of driver fixes from Johan fixing error handling paths,
plus another from Felix. We also have a new device ID added in the DT
bindings for SpacemiT K3"
* tag 'spi-fix-v7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: dt-bindings: fsl-qspi: support SpacemiT K3
spi: ti-qspi: fix use-after-free after DMA setup failure
spi: sprd: fix error pointer deref after DMA setup failure
spi: qup: fix error pointer deref after DMA setup failure
spi: mtk-snfi: Fix resource leak in mtk_snand_read_page_cache()
spi: ep93xx: fix error pointer deref after DMA setup failure
Pull sound fixes from Takashi Iwai:
"As expected, we still continue receiving lots of small fixes.
One major change is about HD-audio pending IRQ handling, but this
would influence only on odd machines or slow VMs. There are a few
other fixes for the core part, but most of them are not-too-serious
UAF fixes, while the rest are mostly device-specific fixes and quirks.
ALSA Core:
- Fix for PCM silencing with bogus iov_iter
- Fixes for past-the-end iterators in timer and seq
- Serialization of UMP output teardown
- Rate-limit ELD parsing errors
HD-audio:
- Fixes for IRQ work handling and SSID matching
- Various Realtek quirks for HP and ASUS laptops, including LED fixes
ASoC:
- Intel: ACPI match table updates for PTL, NVL, and ARL platforms
- Cirrus Logic: Fixes for cs-amp-lib and cs35l56 codecs
- Various platform fixes for AMD, FSL SAI, TI OMAP, and Qualcomm
- DT-binding fix for MediaTek
Others:
- USB ua101: Reject too-short USB descriptors
- Scarlett2: Fix for flash writes
- ASIHPI: Fix for potential OOB access
- AMD SPI: Fix for bus number in ACPI probe
MAINTAINERS:
- Updates for SOF and TI maintainers"
* tag 'sound-7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (47 commits)
ASoC: codecs: pcm512x: fix null-ptr dereference in pcm512x_overclock_xxx_put()
ASoC: Intel: soc-acpi-intel-ptl-match: Remove unnecessary cs42l43 match
ASoC: soc-acpi-intel-ptl-match: Make Chrome matches conditional
ASoC: Intel: soc-acpi: Add entry for sof_es8336 in NVL match table.
ASoC: Intel: sof_sdw: Add support for nvlrvp in NVL platform
ASoC: cs-amp-lib: Fix typo in error message: write -> read
ASoC: cs-amp-lib: Fix missing dput() after debugfs_lookup()
ASoC: cs-amp-lib: Fix wrong sizeof() in _cs_amp_set_efi_calibration_data()
ASoC: cs35l56: Fix flushing of IRQ work in cs35l56_sdw_remove()
MAINTAINERS: ASoC: Intel/SOF: Remove Ranjani Sridharan as maintainer
ALSA: seq: Serialize UMP output teardown with event_input
ALSA: scarlett2: Allow flash writes ending at segment boundary
ALSA: hda/realtek: Add LED quirk for HP ProBook 430 G6
ALSA: hda/intel: Make sure to cancel irq-pending work at closing PCM stream
ALSA: hda: Move irq pending work into hda-intel stream
ASoC: soc-utils: Add missing va_end in snd_soc_ret()
ALSA: ua101: Reject too-short USB descriptors
ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP 16 Piston OmniBook X
ALSA: seq: avoid past-the-end iterator in snd_seq_create_port()
ALSA: timer: avoid past-the-end iterator in snd_timer_dev_register()
...
The EIC7700 USB requires a USB PHY reset operation; otherwise, the USB
will not work. The reason why the USB driver that was applied can work
properly is that the USB PHY has already been reset in ESWIN's U-Boot.
However, the proper functioning of the USB driver should not be dependent
on the bootloader. Therefore, it is necessary to incorporate the USB PHY
reset signal into the DT bindings.
This patch does not introduce any backward incompatibility since the dts
is not upstream yet. As array of reset operations are used in the driver,
no modifications to the USB controller driver are needed.
Fixes: c640a4239d ("dt-bindings: usb: Add ESWIN EIC7700 USB controller")
Cc: stable <stable@kernel.org>
Signed-off-by: Hang Cao <caohang@eswincomputing.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260415064238.1784-1-caohang@eswincomputing.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The deprecated 'usb-phy' property is documented already in usb.yaml and
doesn't need a type definition here. It just needs constraints on how
many entries there are.
As this is a host controller, reference usb-hcd.yaml which then
references usb.yaml.
Fixes: 70fcdc82cf ("dt-bindings: usb: ti,omap4-musb: convert to DT schema")
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260508182556.1759173-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document two optional cells in eswin,hsp-sp-csr for the TXD and RXD
delay control register offsets.
These registers are used by the driver to clear any residual delay
configuration left by the bootloader, ensuring that MAC-side RGMII delay
settings are applied solely according to the kernel configuration.
Add a reference to the EIC7700X SoC Technical Reference Manual for
background information about the HSP CSR block.
Fixes: 888bd0eca9 ("dt-bindings: ethernet: eswin: Document for EIC7700 SoC")
Signed-off-by: Zhi Li <lizhi2@eswincomputing.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260518022023.427-1-lizhi2@eswincomputing.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fixes for v7.1:
Core:
- Fixed bindings for SM8650, SM8750 and Eliza
- Don't use UTS_RELEASE directly
- Fix typo in clock-names property
DPU:
- Fixed CWB description on Kaanapali
- Fixed scanline strides for YUV UBWC formats
- Stopped DSI register dumping to access past the end of region
DSI:
- Fix dumping unaligned regions
GPU:
- Fix GMEM_BASE for a6xx gen3
- Fix userspace reachable crash on a2xx-a4xx
- Fix sysprof_active for counter collection with IFPC enabled GPUs
- Fix shrinker lockdep
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <rob.clark@oss.qualcomm.com>
Link: https://patch.msgid.link/CACSVV02cTK7h=d0uqanRE-cj35THDqFjqsTB_2zQV1Mcw77aNw@mail.gmail.com
The DT bindings for inline-crypto engine do not specify the UFS_PHY_GDSC
power-domain and iface clock. Without enabling the iface clock and the
associated power-domain the ICE hardware cannot function correctly and
leads to unclocked hardware accesses being observed during probe.
Fix the DT bindings for inline-crypto engine to require the UFS_PHY_GDSC
power-domain and iface clock for new devices (Eliza and Milos) introduced
in the current release (7.1) with yet-to-stabilize ABI, while preserving
backward compatibility for older devices.
Fixes: 618195a7ac ("dt-bindings: crypto: qcom,inline-crypto-engine: Document the Eliza ICE")
Fixes: 85faec1e85 ("dt-bindings: crypto: qcom,inline-crypto-engine: document the Milos ICE")
Reviewed-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260416-qcom_ice_power_and_clk_vote-v5-1-5ccf5d7e2846@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The i2c block on the Apple silicon t8122 (M3) SoC is compatible with the
existing driver. Add "apple,t8122-i2c" as SoC specific compatible under
"apple,t8103-i2c" used by the deriver.
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- add data_race() in rtc_dev_poll()
Drivers:
- remove i2c_match_id usage
- abx80x: Disable alarm feature if no interrupt attached
- ti-k3: support resuming from IO DDR low power mode"
* tag 'rtc-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: abx80x: Disable alarm feature if no interrupt attached
rtc: ntxec: fix OF node reference imbalance
rtc: pic32: allow driver to be compiled with COMPILE_TEST
rtc: ti-k3: Add support to resume from IO DDR low power mode
rtc: cmos: Use platform_get_irq_optional() in cmos_platform_probe()
dt-bindings: rtc: add olpc,xo1-rtc to trivial-rtc
dt-bindings: rtc: sc2731: Add compatible for SC2730
rtc: add data_race() in rtc_dev_poll()
rtc: armada38x: zalloc + calloc to single allocation
dt-bindings: rtc: isl12026: convert to YAML schema
dt-bindings: rtc: microcrystal,rv3028: Allow to specify vdd-supply
rtc: max77686: convert to i2c_new_ancillary_device
dt-bindings: rtc: mpfs-rtc: permit resets
rtc: rx8025: Remove use of i2c_match_id()
rtc: rv8803: Remove use of i2c_match_id()
rtc: rs5c372: Remove use of i2c_match_id()
rtc: pcf2127: Remove use of i2c_match_id()
rtc: m41t80: Remove use of i2c_match_id()
rtc: abx80x: Remove use of i2c_match_id()
Pull char / misc / IIO / and others driver updates from Greg KH:
"Here is the char/misc/iio and other smaller driver subsystem updates
for 7.1-rc1. Lots of stuff in here, all tiny, but relevant for the
different drivers they touch. Major points in here is:
- the usual large set of new IIO drivers and updates for that
subsystem (the large majority of this diffstat)
- lots of comedi driver updates and bugfixes
- coresight driver updates
- interconnect driver updates and additions
- mei driver updates
- binder (both rust and C versions) updates and fixes
- lots of other smaller driver subsystem updates and additions
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (405 commits)
coresight: tpdm: fix invalid MMIO access issue
mei: me: add nova lake point H DID
mei: lb: add late binding version 2
mei: bus: add mei_cldev_uuid
w1: ds2490: drop redundant device reference
bus: mhi: host: pci_generic: Add Telit FE912C04 modem support
mei: csc: wake device while reading firmware status
mei: csc: support controller with separate PCI device
mei: convert PCI error to common errno
mei: trace: print return value of pci_cfg_read
mei: me: move trace into firmware status read
mei: fix idle print specifiers
mei: me: use PCI_DEVICE_DATA macro
sonypi: Convert ACPI driver to a platform one
misc: apds990x: fix all kernel-doc warnings
most: usb: Use kzalloc_objs for endpoint address array
hpet: Convert ACPI driver to a platform one
misc: vmw_vmci: Fix spelling mistakes in comments
parport: Remove completed item from to-do list
char: remove unnecessary module_init/exit functions
...
Pull spi fixes from Mark Brown:
"This is quite a big set of fixes, almost all from Johan Hovold who is
on an ongoing quest to clean up issues with probe and removal handling
in drivers.
There isn't anything too concerning here especially with the
deregistration stuff which will very rarely get run in production
systems since this is all platform devices in the SoC on embedded
hardware, but it's all real issues which should be fixed. There's more
in flight here.
We also have a few other minor fixes, one from Felix Gu along the same
lines as Johan's work and a couple of documentation things"
* tag 'spi-fix-v7.1-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (23 commits)
spi: fix controller cleanup() documentation
spi: fix resource leaks on device setup failure
spi: axiado: clean up probe return value
spi: axiado: rename probe error labels
spi: axiado: fix runtime pm imbalance on probe failure
spi: orion: clean up probe return value
spi: orion: fix clock imbalance on registration failure
spi: orion: fix runtime pm leak on unbind
spi: imx: fix runtime pm leak on probe deferral
spi: mpc52xx: fix use-after-free on registration failure
spi: Fix the error description in the `ptp_sts_word_post` comment
spi: topcliff-pch: fix use-after-free on unbind
spi: topcliff-pch: fix controller deregistration
spi: orion: fix controller deregistration
spi: mxic: fix controller deregistration
spi: mpc52xx: fix use-after-free on unbind
spi: mpc52xx: fix controller deregistration
spi: cadence-quadspi: fix controller deregistration
spi: cadence: fix controller deregistration
spi: mtk-snfi: fix memory leak in probe
...
Pull sound fixes from Takashi Iwai:
"Here are the rest of small updates for 7.1-rc1. All small fixes mostly
for device-specific issues or regressions.
Core:
- Fix a potential data race in fasync handling
USB-audio:
- New device support: Line6 POD HD PRO, NexiGo N930W webcam
- Fixes for Audio Advantage Micro II SPDIF switch and E-MU sample
rates
- Limit UAC2 rate parsing to prevent potential overflows
HD-Audio:
- Device-specific quirks for HP, Acer, and Honor laptops
- Fix for TAS2781 SPI device abnormal sound
- Move Intel firmware loading into probe work to avoid stalling
ASoC:
- New support for TI TAS5832
- Fixes for SoundWire SDCA/DisCo boolean parsing
- Driver-specific fixes for Intel SOF, ES8311, RT1320, and PXA2xx
Misc:
- Fixes for resource leaks and data races in 6fire, caiaq, als4000,
and pcmtest drivers"
* tag 'sound-fix-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (41 commits)
Revert "ALSA: pcmtest: fix reference leak on failed device registration"
ASoC: tas2781: Add tas5832 support
ASoC: dt-bindings: ti,tas2781: Add TAS5832 support
ALSA: usb-audio: Fix Audio Advantage Micro II SPDIF switch
ALSA: usb-audio: Avoid false E-MU sample-rate notifications
ASoC: sdw_utils: cs42l43: allow spk component names to be combined
ASoC: qcom: x1e80100: limit speaker volumes
ALSA: hda/realtek - Add mute LED support for HP Victus 15-fa2xxx
ALSA: pcmtest: Fix resource leaks in module init error paths
ALSA: usb-audio/line6: Add support for POD HD PRO
ALSA: hda/realtek: Add LED fixup for HP EliteBook 6 G2a Laptops
ASoC: SDCA: Fix reading of mipi-sdca-control-deferrable
regmap: sdw-mbq: Allow defers on undeferrable controls
Revert "ALSA: usb-audio: Add quirk for SmartlinkTechnology M01"
ALSA: als4000: Fix capture trigger chip->mode race
ALSA: core: Fix potential data race at fasync handling
ALSA: hda/tas2781: Fix sound abnormal issue on some SPI device
ALSA: hda/realtek: add quirk for Acer Nitro 16 AN16-41
ALSA: caiaq: Fix control_put() result and cache rollback
ALSA: pcmtest: fix reference leak on failed device registration
...
Pull more i2c updates from Wolfram Sang:
- cx92755: convert I2C bindings to DT schema
- mediatek: add optional bus power management during transfers
- pxa: handle early bus busy condition
- MAINTAINERS: update I2C RUST entry
* tag 'i2c-for-7.1-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: add Rust I2C tree and update Igor Korotin's email
i2c: mediatek: add bus regulator control for power saving
dt-bindings: i2c: cnxt,cx92755-i2c: Convert to DT schema
i2c: pxa: handle 'Early Bus Busy' condition on Armada 3700
Pull more SoC updates from Arnd Bergmann:
"These are the contents that arrived during the easter vacation and
didn't make it into the last 7.0 bugfixes or the first set of branches
for the merge window. Aside from a reset controller bugfix and an
update to the MAINTAINERS entry, this is all devicetree changes.
The Marvell devicetree updates contain the usual minor updates and
bugfixes, along with a two larger but trivial patches to drop unused
dtsi files, the single broadcom fix addresses a build time warning
introduced during the merge window.
The freescale, amlogic, and apple changes missed the last fixes branch
for 7.0"
* tag 'soc-late-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits)
arm64: dts: meson-gxl-p230: fix ethernet PHY interrupt number
arm64: dts: amlogic: meson-axg: Add missing cache information to cpu0
arm64: dts: amlogic: t7: khadas-vim4: fix board model name
arm64: dts: amlogic: Fix GIC register ranges for Amlogic T7
arm64: dts: amlogic: t7: khadas-vim4: fix memory layout for 8GB RAM
arm64: dts: amlogic: s6: Drop CPU masks from GICv3 PPI interrupts
Documentation/process: maintainer-soc: Document purpose of defconfigs
Documentation/process: maintainer-soc: Trim from trivial ask-DT
ARM: dts: bcm4709: fix bus range assignment
arm64: dts: apple: Fix spelling error
dt-bindings: Update Sasha Finkelstein's email address
mailmap: Update Sasha Finkelstein's email address
arm64: dts: marvell: armada-37xx: swap PHYs' order in USB3 controller node
arm64: dts: marvell: armada-37xx: use 'usb2-phy' in USB3 controller's phy-names
arm64: dts: imx8mm-tqma8mqml: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mn-tqma8mqnl: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mm-emtop-som: Correct PAD settings for PMIC_nINT
reset: amlogic: t7: Fix null reset ops
arm64: dts: imx8mp-data-modul-edm-sbc: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mp-dhcom-som: Correct PAD settings for PMIC_nINT
...
Pull input updates from Dmitry Torokhov:
- a new charlieplex GPIO keypad driver
- an update to aw86927 driver to support 86938 chip
- an update for Chrome OS EC keyboard driver to support Fn-<key> keymap
extension
- an UAF fix in debugfs teardown in EDT touchscreen driver
- a number of conversions for input drivers to use guard() and __free()
cleanup primitives
- several drivers for bus mice (inport, logibm) and other very old
devices have been removed
- OLPC HGPK PS/2 protocol has been removed as it's been broken and
inactive for 10 something years
- dedicated kpsmoused has been removed from psmouse driver
- other assorted cleanups and fixups
* tag 'input-for-v7.1-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (101 commits)
Input: charlieplex_keypad - add GPIO charlieplex keypad
dt-bindings: input: add GPIO charlieplex keypad
dt-bindings: input: add settling-time-us common property
dt-bindings: input: add debounce-delay-ms common property
Input: imx_keypad - fix spelling mistake "Colums" -> "Columns"
Input: edt-ft5x06 - fix use-after-free in debugfs teardown
Input: ims-pcu - fix heap-buffer-overflow in ims_pcu_process_data()
Input: ct82c710 - remove driver
Input: mk712 - remove driver
Input: logibm - remove driver
Input: inport - remove driver
Input: qt1070 - inline i2c_check_functionality check
Input: qt1050 - inline i2c_check_functionality check
Input: aiptek - validate raw macro indices before updating state
Input: gf2k - skip invalid hat lookup values
Input: xpad - add RedOctane Games vendor id
Input: xpad - remove stale TODO and changelog header
Input: usbtouchscreen - refactor endpoint lookup
Input: aw86927 - add support for Awinic AW86938
dt-bindings: input: awinic,aw86927: Add Awinic AW86938
...
Pull clk updates from Stephen Boyd:
"We've finally gotten rid of the struct clk_ops::round_rate() code
after months of effort from Brian Masney. Now the only option is to
use determine_rate(), which is good because that takes a struct
argument instead of just a couple unsigned longs, allowing us to
easily modify the way we determine and set rates in the clk tree.
Beyond that core framework change we've got the typical pile of new
SoC clk driver additions, fixes for clk data and/or adding missing
clks because the consumer driver using those clks wasn't ready, etc.
The usual suspects are all here: Qualcomm, Samsung, Mediatek, and
Rockchip along with some newcomers making RISC-V SoCs like ESWIN's
eic700 and Tenstorrent's Atlantis. The clk driver side of this looks
pretty normal.
Core:
- Remove the round_rate() clk op (yay!)
New Drivers:
- ESWIN eic700 SoC clk support
- Econet EN751221 SoC clock/reset support
- Global TCSR, RPMh, and display clock controller support for the
Qualcomm Eliza platform
- TCSR, the multiple global, and the RPMh clock controller support
for the Qualcomm Nord platform
- GPU clock controller support for Qualcomm SM8750
- Video and GPU clock controller support for Qualcomm Glymur
- Global clock controller support for Qualcomm IPQ5210
- Axis ARTPEC-9: Add new PLL clocks and new drivers for eight clock
controllers on the SoC
- ExynosAutov920: Add G3D (GPU) clock controller
- Clock driver for the Rockchip RV1103B SoC
- Initial support for the Renesas RZ/G3L (R9A08G046) SoC
- Clock and reset controllers (e.g. PRCM) in the Tenstorrent Atlantis SoC"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (132 commits)
clk: visconti: pll: initialize clk_init_data to zero
clk: fsl-sai: Add MCLK generation support
clk: fsl-sai: Extract clock setup into fsl_sai_clk_register()
dt-bindings: clock: fsl-sai: Document clock-cells = <1> support
clk: fsl-sai: Add i.MX8M support with 8 byte register offset
clk: fsl-sai: Sort the headers
dt-bindings: clock: fsl-sai: Document i.MX8M support
clk: qcom: gcc: Add multiple global clock controller driver for Nord SoC
clk: qcom: rpmh: Add support for Nord rpmh clocks
clk: qcom: Add TCSR clock driver for Nord SoC
dt-bindings: clock: qcom: Add Nord Global Clock Controller
dt-bindings: clock: qcom-rpmhcc: Add support for Nord SoCs
dt-bindings: clock: qcom: Document the Nord SoC TCSR Clock Controller
clk: qcom: gcc-x1e80100: Keep GCC USB QTB clock always ON
clk: qcom: Constify list of critical CBCR registers
clk: qcom: Constify qcom_cc_driver_data
clk: qcom: videocc-glymur: Constify qcom_cc_desc
clk: qcom: Add a driver for SM8750 GPU clocks
dt-bindings: clock: qcom: Add SM8750 GPU clocks
clk: qcom: ipq-cmn-pll: Add IPQ8074 SoC support
...
Pull SCSI updates from James Bottomley:
"Usual driver updates (ufs, lpfc, fnic, target, mpi3mr).
The substantive core changes are adding a 'serial' sysfs attribute and
getting sd to support > PAGE_SIZE sectors"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (98 commits)
scsi: target: Don't validate ignored fields in PROUT PREEMPT
scsi: qla2xxx: Use nr_cpu_ids instead of NR_CPUS for qp_cpu_map allocation
scsi: ufs: core: Disable timestamp for Kioxia THGJFJT0E25BAIP
scsi: mpi3mr: Fix typo
scsi: sd: fix missing put_disk() when device_add(&disk_dev) fails
scsi: libsas: Delete unused to_dom_device() and to_dev_attr()
scsi: storvsc: Handle PERSISTENT_RESERVE_IN truncation for Hyper-V vFC
scsi: iscsi_tcp: Remove unneeded selections of CRYPTO and CRYPTO_MD5
scsi: lpfc: Update lpfc version to 15.0.0.0
scsi: lpfc: Add PCI ID support for LPe42100 series adapters
scsi: lpfc: Introduce 128G link speed selection and support
scsi: lpfc: Check ASIC_ID register to aid diagnostics during failed fw updates
scsi: lpfc: Update construction of SGL when XPSGL is enabled
scsi: lpfc: Remove deprecated PBDE feature
scsi: lpfc: Add REG_VFI mailbox cmd error handling
scsi: lpfc: Log MCQE contents for mbox commands with no context
scsi: lpfc: Select mailbox rq_create cmd version based on SLI4 if_type
scsi: lpfc: Break out of IRQ affinity assignment when mask reaches nr_cpu_ids
scsi: ufs: core: Make the header files self-contained
scsi: ufs: core: Remove an include directive from ufshcd-crypto.h
...
Pull LED updates from Lee Jones:
Core:
- Implement fallback to software node name for LED names
- Fix formatting issues in `led-core.c` reported by checkpatch.pl
- Make `led_remove_lookup()` NULL-aware
- Switch from `class_find_device_by_of_node()` to
`class_find_device_by_fwnode()`
- Drop the unneeded dependency on `OF_GPIO` from `LEDS_NETXBIG`
in Kconfig
Kinetic KTD2692:
- Make the `ktd2692_timing` variable static to resolve a
sparse warning
LGM SSO:
- Fix a typo in the `GET_SRC_OFFSET` macro
- Remove a duplicate assignment of `priv->mmap` in
`intel_sso_led_probe()`
Multicolor:
- Fix a signedness error by changing the `intensity_value` type
to `unsigned int`
Qualcomm LPG:
- Prevent array overflow when selecting high-resolution values
Spreadtrum SC2731:
- Add a compatible string for the SC2730 PMIC LED controller
TI LM3642:
- Use `guard(mutex)` to simplify locking and avoid manual
`mutex_unlock()` calls
TI LP5569:
- Use `sysfs_emit()` instead of `sprintf()` for sysfs outputs
TI LP5860:
- Add the `enable-gpios` property for the `VIO_EN` pin"
TI LP8860:
- Do not unconditionally program the EEPROM on probe
- Hold the mutex lock for the entirety of the EEPROM programming
process
- Return directly from `lp8860_init()` instead of using empty `goto`
statements
- Use a single regmap table and an access table instead of separate
maps for normal and EEPROM registers
- Remove an unused read of the `STATUS` register during EEPROM
programming
TTY Trigger:
- Prefer `IS_ERR_OR_NULL()` over manual NULL checks"
* tag 'leds-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds:
leds: class: Make led_remove_lookup() NULL-aware
leds: led-class: Switch to using class_find_device_by_fwnode()
leds: Kconfig: Drop unneeded dependency on OF_GPIO
leds: lm3642: Use guard to simplify locking
leds: core: Fix formatting issues
leds: core: Implement fallback to software node name for LED names
leds: lgm-sso: Fix typo in macro for src offset
dt-bindings: leds: lp5860: add enable-gpio
leds: Prefer IS_ERR_OR_NULL over manual NULL check
dt-bindings: leds: sc2731: Add compatible for SC2730
leds: lp8860: Do not always program EEPROM on probe
leds: lp8860: Remove unused read of STATUS register
leds: lp8860: Hold lock for all of EEPROM programming
leds: lp8860: Return directly from lp8860_init
leds: lp8860: Use a single regmap table
leds: lgm-sso: Remove duplicate assignments for priv->mmap
leds: qcom-lpg: Check for array overflow when selecting the high resolution
leds: ktd2692: Make ktd2692_timing variable static
leds: lp5569: Use sysfs_emit instead of sprintf()
leds: multicolor: Change intensity_value to unsigned int
Pull MFD updates from Lee Jones:
"Core:
- Add a resource-managed version of alloc_workqueue()
(`devm_alloc_workqueue()`)
- Preserve the Open Firmware (OF) node when an ACPI handle
is present
Apple SMC:
- Wire up the Apple SMC power driver by adding a new MFD cell
Atmel HLCDC:
- Fetch the LVDS PLL clock as a fallback if the generic sys_clk
is unavailable
Broadcom BCM2835 PM:
- Add support for the BCM2712 power management device
- Introduce a hardware type identifier to distinguish SoC variants
Congatec CGBC, KEMPLD, RSMU, Si476x:
- Fix various kernel-doc warnings and correct struct member names
DLN2:
- Drop redundant USB device references and switch to managed
resource allocations
- Update bare 'unsigned' types to 'unsigned int'
ENE KB3930:
- Use the of_device_is_system_power_controller() wrapper
EZX PCAP:
- Avoid rescheduling after destroying the workqueue by switching
to a device-managed workqueue
- Drop redundant memory allocation error messages
- Return directly instead of using empty goto statements
Freescale i.MX25 TSADC:
- Convert devicetree bindings from TXT to YAML format
Freescale MC13xxx:
- Fix a memory leak in subdevice platform data allocation by
using devm_kmemdup()
Intel LPC ICH:
- Expose a software node for the GPIO controller cell to fix
GPIO lookups
Intel LPSS:
- Add PCI IDs for the Intel Nova Lake-H platform
Maxim MAX77620:
- Convert devicetree bindings from TXT to YAML format
- Document an optional I2C address for the MAX77663 RTC device
Maxim MAX77705:
- Make the max77705_pm_ops variable static to resolve a
sparse warning
MediaTek MT6397:
- Correct the hardware CIDs for the MT6328, MT6331, and MT6332
PMICs to allow proper driver binding
ROHM BD71828:
- Enable system wakeup via the power button
ROHM BD72720:
- Add a new compatible string for the ROHM BD73900 PMIC
SpacemiT P1:
- Drop the deprecated "vin-supply" property from the devicetree
bindings
- Add individual regulator supply properties to match actual
hardware topology
STMicroelectronics STPMIC1:
- Attempt system shutdown a second time to handle transient I2C
communication failures
Viperboard:
- Drop redundant USB device references"
* tag 'mfd-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (28 commits)
mfd: core: Preserve OF node when ACPI handle is present
mfd: ene-kb3930: Use of_device_is_system_power_controller() wrapper
mfd: intel-lpss: Add Intel Nova Lake-H PCI IDs
dt-bindings: mfd: max77620: Document optional RTC address for MAX77663
dt-bindings: mfd: max77620: Convert to DT schema
mfd: ezx-pcap: Avoid rescheduling after destroying workqueue
mfd: ezx-pcap: Return directly instead of empty gotos
mfd: ezx-pcap: Drop memory allocation error message
mfd: bcm2835-pm: Add BCM2712 PM device support
mfd: bcm2835-pm: Introduce SoC-specific type identifier
dt-bindings: mfd: bd72720: Add ROHM BD73900
mfd: si476x: Fix kernel-doc warnings
mfd: rsmu: Remove a empty kernel-doc line
mfd: kempld: Fix kernel-doc struct member names
mfd: congatec: Fix kernel-doc struct member names
dt-bindings: mfd: Convert fsl-imx25-tsadc.txt to yaml format
mfd: viperboard: Drop redundant device reference
mfd: dln2: Switch to managed resources and fix bare unsigned types
mfd: macsmc: Wire up Apple SMC power driver
mfd: mt6397: Properly fix CID of MT6328, MT6331 and MT6332
...
Apple SoC fixes for 7.0
Two commits without any functional changes that arrived just before the
merge window opened:
- Update Sasha's email address in all dt-bindings, MAINTAINERS and add
him to mailmap
- Fix a typo in spi1-nvram.dtsi
* tag 'apple-soc-fixes-7.0' of https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux:
arm64: dts: apple: Fix spelling error
dt-bindings: Update Sasha Finkelstein's email address
mailmap: Update Sasha Finkelstein's email address
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* arm/fixes:
arm64: dts: imx8mm-tqma8mqml: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mn-tqma8mqnl: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mm-emtop-som: Correct PAD settings for PMIC_nINT
reset: amlogic: t7: Fix null reset ops
arm64: dts: imx8mp-data-modul-edm-sbc: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mp-dhcom-som: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mp-ultra-mach-sbc: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mp-sr-som: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mp-nitrogen-som: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mp-aristainetos3a-som-v1: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mp-edm-g: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mp-icore-mx8mp: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mp-navqp: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mp-debix-som-a: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mp-debix-model-a: Correct PAD settings for PMIC_nINT
dt-bindings: arm64: add Marvell 7k COMe boards
i2c-host for v7.1, part 2
- cx92755: convert I2C bindings to DT schema
- mediatek: add optional bus power management during transfers
- pxa: handle early bus busy condition
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 7.1-rc1.
Lots of little things in here, nothing major, just constant
improvements, updates, and new features. Highlights are:
- new USB power supply driver support.
These changes did touch outside of drivers/usb/ but got acks from
the relevant mantainers for them.
- dts file updates and conversions
- string function conversions into "safer" ones
- new device quirks
- xhci driver updates
- usb gadget driver minor fixes
- typec driver additions and updates
- small number of thunderbolt driver changes
- dwc3 driver updates and additions of new hardware support
- other minor driver updates
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'usb-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (176 commits)
usb: dwc3: starfive: Add JHB100 USB 2.0 DRD controller
dt-bindings: usb: dwc3: add support for StarFive JHB100
dt-bindings: usb: atmel,at91sam9rl-udc: convert to DT schema
dt-bindings: usb: atmel,at91rm9200-udc: convert to DT schema
dt-bindings: usb: generic-ehci: fix schema structure and add at91sam9g45 constraints
dt-bindings: usb: generic-ohci: add AT91RM9200 OHCI binding support
arm: dts: at91: remove unused #address-cells/#size-cells from sam9x60 udc node
drivers/usb/host: Fix spelling error 'seperate' -> 'separate'
usbip: tools: add hint when no exported devices are found
USB: serial: iuu_phoenix: fix iuutool author name
usb: gadget: f_ncm: validate minimum block_len in ncm_unwrap_ntb()
usb: gadget: f_phonet: fix skb frags[] overflow in pn_rx_complete()
usb: gadget: f_hid: Add missing error code
usb: typec: cros_ec_ucsi: Load driver from OF and ACPI definitions
dt-bindings: chrome: Add cros-ec-ucsi compatibility to typec binding
USB: of: Simplify with scoped for each OF child loop
usbip: validate number_of_packets in usbip_pack_ret_submit()
usb: gadget: renesas_usb3: validate endpoint index in standard request handlers
usb: core: config: reverse the size check of the SSP isoc endpoint descriptor
usb: typec: ucsi: Set usb mode on partner change
...
Pull tty/serial updates from Greg KH:
"Here is the set of tty and serial driver changes for 7.1-rc1.
Not much here this cycle, biggest thing is the removal of an old
driver that never got any actual hardware support (esp32), and the
second try to moving the tty ports to their own workqueues (first try
was in 7.0-rc1 but was reverted due to problems)
Otherwise it's just a small set of driver updates and some vt modifier
key enhancements.
All have been in linux-next for a while with no reported issues"
* tag 'tty-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (35 commits)
tty: serial: ip22zilog: Fix section mispatch warning
hvc/xen: Check console connection flag
serial: sh-sci: Add support for RZ/G3L RSCI
dt-bindings: serial: renesas,rsci: Document RZ/G3L SoC
tty: atmel_serial: update outdated reference to atmel_tasklet_func()
serial: xilinx_uartps: Drop unused include
serial: qcom-geni: drop stray newline format specifier
serial: 8250: loongson: Enable building on MIPS Loongson64
dt-bindings: serial: 8250: Add Loongson 3A4000 uart compatible
serial: 8250_fintek: Add support for F81214E
tty: tty_port: add workqueue to flip TTY buffer
vt: support ITU-T T.416 color subparameters
serial: qcom-geni: Fix RTS behavior with flow control
tty: serial: imx: keep dma request disabled before dma transfer setup
tty: serial: 8250: Add SystemBase Multi I/O cards
serial: pic32_uart: allow driver to be compiled on all architectures with COMPILE_TEST
serial: tegra: remove Kconfig dependency on APB DMA controller
dt-bindings: serial: amlogic,meson-uart: Add compatible string for A9
dt-bindings: serial: atmel,at91-usart: add microchip,lan9691-usart
serial: auart: check clk_enable() return in console write
...
Pull pin control updates from Linus Walleij:
"Core changes:
- Perform basic checks on pin config properties so as not to allow
directly contradictory settings such as setting a pin to more than
one bias or drive mode
- Handle input-threshold-voltage-microvolt property
- Introduce pinctrl_gpio_get_config() handling in the core for SCMI
GPIO using pin control
New drivers:
- GPIO-by-pin control driver (also appearing in the GPIO pull
request) fulfilling a promise on a comment from Grant Likely many
years ago: "can't GPIO just be a front-end for pin control?" it
turns out it can, if and only if you design something new from
scratch, such as SCMI
- Broadcom BCM7038 as a pinctrl-single delegate
- Mobileye EyeQ6Lplus OLB pin controller
- Qualcomm Eliza and Hawi families TLMM pin controllers
- Qualcomm SDM670 and Milos family LPASS LPI pin controllers
- Qualcomm IPQ5210 pin controller
- Realtek RTD1625 pin controller support
- Rockchip RV1103B pin controller support
- Texas Instruments AM62L as a pinctrl-single delegate
Improvements:
- Set config implementation for the Spacemit K1 pin controller"
* tag 'pinctrl-v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (84 commits)
pinctrl: qcom: Add Hawi pinctrl driver
dt-bindings: pinctrl: qcom: Describe Hawi TLMM block
dt-bindings: pinctrl: pinctrl-max77620: convert to DT schema
pinctrl: single: Add bcm7038-padconf compatible matching
dt-bindings: pinctrl: pinctrl-single: Add brcm,bcm7038-padconf
dt-bindings: pinctrl: apple,pinctrl: Add t8122 compatible
pinctrl: qcom: sdm670-lpass-lpi: label variables as static
pinctrl: sophgo: pinctrl-sg2044: Fix wrong module description
pinctrl: sophgo: pinctrl-sg2042: Fix wrong module description
pinctrl: qcom: add sdm670 lpi tlmm
dt-bindings: pinctrl: qcom: Add SDM670 LPASS LPI pinctrl
dt-bindings: qcom: lpass-lpi-common: add reserved GPIOs property
pinctrl: qcom: Introduce IPQ5210 TLMM driver
dt-bindings: pinctrl: qcom: add IPQ5210 pinctrl
pinctrl: qcom: Drop redundant intr_target_reg on modern SoCs
pinctrl: qcom: eliza: Fix interrupt target bit
pinctrl: core: Don't use "proxy" headers
pinctrl: amd: Support new ACPI ID AMDI0033
pinctrl: renesas: rzg2l: Drop superfluous blank line
pinctrl: renesas: rzg2l: Fix save/restore of {IOLH,IEN,PUPD,SMT} registers
...
Pull i2c updates from Wolfram Sang:
"The biggest news in this pull request is that it will start the last
cycle of me handling the I2C subsystem. From 7.2. on, I will pass
maintainership to Andi Shyti who has been maintaining the I2C drivers
for a while now and who has done a great job in doing so.
We will use this cycle for a hopefully smooth transition. Thanks must
go to Andi for stepping up! I will still be around for guidance.
Updates:
- generic cleanups in npcm7xx, qcom-cci, xiic and designware DT
bindings
- atr: use kzalloc_flex for alias pool allocation
- ixp4xx: convert bindings to DT schema
- ocores: use read_poll_timeout_atomic() for polling waits
- qcom-geni: skip extra TX DMA TRE for single read messages
- s3c24xx: validate SMBus block length before using it
- spacemit: refactor xfer path and add K1 PIO support
- tegra: identify DVC and VI with SoC data variants
- tegra: support SoC-specific register offsets
- xiic: switch to devres and generic fw properties
- xiic: skip input clock setup on non-OF systems
- various minor improvements in other drivers
rtl9300:
- add per-SoC callbacks and clock support for RTL9607C
- add support for new 50 kHz and 2.5 MHz bus speeds
- general refactoring in preparation for RTL9607C support
New support:
- DesignWare GOOG5000 (ACPI HID)
- Intel Nova Lake (ACPI ID)
- Realtek RTL9607C
- SpacemiT K3 binding
- Tegra410 register layout support"
* tag 'i2c-for-7.1-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (40 commits)
i2c: usbio: Add ACPI device-id for NVL platforms
i2c: qcom-geni: Avoid extra TX DMA TRE for single read message in GPI mode
i2c: atr: use kzalloc_flex
i2c: spacemit: introduce pio for k1
i2c: spacemit: move i2c_xfer_msg()
i2c: xiic: skip input clock setup on non-OF systems
i2c: xiic: use numbered adapter registration
i2c: xiic: cosmetic: use resource format specifier in debug log
i2c: xiic: cosmetic cleanup
i2c: xiic: switch to generic device property accessors
i2c: xiic: remove duplicate error message
i2c: xiic: switch to devres managed APIs
i2c: rtl9300: add RTL9607C i2c controller support
i2c: rtl9300: introduce new function properties to driver data
i2c: rtl9300: introduce clk struct for upcoming rtl9607 support
dt-bindings: i2c: realtek,rtl9301-i2c: extend for clocks and RTL9607C support
i2c: rtl9300: introduce a property for 8 bit width reg address
i2c: rtl9300: introduce F_BUSY to the reg_fields struct
i2c: rtl9300: introduce max length property to driver data
i2c: rtl9300: split data_reg into read and write reg
...
Pull MTD updates from Miquel Raynal:
"MTD changes:
- mtdconcat finally makes it in, after several years of being merged
and reverted
- Baikal SoC support is being removed, so MTD bits are being removed
as well
- misc cleanups
NAND changes:
- SunXi driver support for new versions of the Allwinner NAND
controller.
- DT-binding improvements and cleanups.
- A few fixes (Realtek ECC and Winbond SPI NAND), aside with the
usual load of misc changes.
SPI NOR fixes:
- Enable die erase on MT35XU02GCBA. We knew this flash needed this
fixup since 7f77c561e2 ("mtd: spi-nor: micron-st: add TODO for
fixing mt35xu02gcba") but did not add it due to lack of hardware to
test on.
- Fix locking on some Winbond w25q series flashes.
- Fix Auto Address Increment (AAI) writes on SST that flashes that
start on odd address. The write enable latch needs to be set again
after the single byte program"
* tag 'mtd/for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (44 commits)
mtd: spinand: winbond: Declare the QE bit on W25NxxJW
mtd: spi-nor: micron-st: Enable die erase support for MT35XU02GCBA
mtd: spi-nor: winbond: Fix locking support for w25q256jw
mtd: spi-nor: sst: Fix write enable before AAI sequence
mtd: spi-nor: winbond: Fix locking support for w25q64jvm
mtd: spi-nor: winbond: Fix locking support for w25q256jwm
dt-bindings: mtd: mxc-nand: add missing compatible string and ref to nand-controller-legacy.yaml
dt-bindings: mtd: gpmi-nand: ref to nand-controller-legacy.yaml
dt-bindings: mtd: refactor NAND bindings and add nand-controller-legacy.yaml
mtd: spinand: winbond: Clarify when to enable the HS bit
mtd: rawnand: sunxi: introduce maximize variable user data length
mtd: rawnand: sunxi: fix typos in comments
mtd: rawnand: sunxi: change error prone variable name
mtd: rawnand: sunxi: remove dead code
mtd: rawnand: sunxi: make the code more self-explanatory
mtd: rawnand: sunxi: replace hard coded value by a define - take2
mtd: rawnand: sunxi: do not count BBM bytes twice
mtd: rawnand: sunxi: fix sunxi_nfc_hw_ecc_read_extra_oob
mtd: rawnand: sunxi: sunxi_nand_ooblayout_free code clarification
mtd: cmdlinepart: use a flexible array member
...
Pull remoteproc updates from Bjorn Andersson:
- Move requesting of IRQs in TI Keystone driver to probe time instead
of remoteproc start, to allow better handling of errors.
- Introduce support for more than 10 entries in the Qualcomm minidump
implementation.
- Add audio DSP remoteproc support for the Qualcomm Eliza platform. Add
modem remoteproc support for the Qualcomm MDM9607, MSM8917, MSM8937,
and MSM8940 platforms.
- Add list of Qualcomm QMI service ids to the QMI header file, in order
to avoid sprinkling them across the various drivers using them.
Migrate sysmon to use this constant.
- Fix several issues related to DeviceTree parsing and mailbox handling
in the Xilinx R5F remote processor driver.
- Fix incorrect error checks in reserved memory handling and polish the
code across i.MX and TI drivers.
* tag 'rproc-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (35 commits)
remoteproc: qcom: pas: Add Eliza ADSP support
dt-bindings: remoteproc: qcom,milos-pas: Document Eliza ADSP
remoteproc: qcom: Add missing space before closing bracket
dt-bindings: remoteproc: qcom: Drop types for firmware-name
remoteproc: qcom: Fix minidump out-of-bounds access on subsystems array
dt-bindings: remoteproc: k3-r5f: Add memory-region-names
dt-bindings: remoteproc: k3-r5f: Split up memory regions
remoteproc: use SIZE_MAX in rproc_u64_fit_in_size_t()
dt-bindings: remoteproc: qcom,sm8550-pas: Add Glymur CDSP
dt-bindings: remoteproc: qcom,sm8550-pas: Add Glymur ADSP
remoteproc: xlnx: Release mailbox channels on shutdown
remoteproc: sysmon: Use the unified QMI service ID instead of defining it locally
remoteproc: xlnx: Only access buffer information if IPI is buffered
remoteproc: xlnx: Avoid mailbox setup
remoteproc: keystone: Request IRQs in probe()
remoteproc: pru: Remove empty remove callback
remoteproc: pru: Use rproc_of_parse_firmware() to get firmware name
remoteproc: da8xx: Reorder resource fetching in probe()
remoteproc: da8xx: Remove unused local struct data
remoteproc: da8xx: Use dev_err_probe()
...
