After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/gpio/ to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20241016152435.38149-2-u.kleine-koenig@baylibre.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use devres to drop all goto labels from probe() and remove the driver
remove() callback. While at it: drop the unnecessary dev_info() message
as not only should the driver be quiet when successful, the message is
also wrong: the device was probed at this point, the driver had been
registered earlier.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241014092227.78886-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
FTDI FT2232H is a USB to GPIO chip. Sealevel produces some devices
with this chip. FT2232H presents itself as a composite device with two
interfaces (each is an "MPSSE"). Each MPSSE has two banks (high and low)
of 8 GPIO each. I believe some MPSSE's have only one bank, but I don't
know how to identify them (I don't have any for testing) and as a result
are unsupported for the time being.
Additionally, this driver provides software polling-based interrupts for
edge detection. For the Sealevel device I have to test with, this works
well because there is hardware debouncing. From talking to Sealevel's
people, this is their preferred way to do edge detection.
Signed-off-by: Mary Strodl <mstrodl@csh.rit.edu>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241009131131.1618329-1-mstrodl@csh.rit.edu
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In the 7th generation of the SoC from Aspeed, the control logic of the
GPIO controller has been updated to support per-pin control. Each pin now
has its own 32-bit register, allowing for individual control of the pin's
value, direction, interrupt type, and other settings. The permission for
coprocessor access is supported by the hardware but hasn't been
implemented in the current patch.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20241008081450.1490955-8-billy_tsai@aspeedtech.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use module_platform_driver() to replace module_platform_driver_probe().
The former utilizes platform_driver_register(), which allows the driver to
defer probing when it doesn't acquire the necessary resources due to probe
order. In contrast, the latter uses __platform_driver_probe(), which
includes the comment "Note that this is incompatible with deferred
probing." Since our GPIO driver requires access to the clock resource, the
former is more suitable.
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20241008081450.1490955-4-billy_tsai@aspeedtech.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Pull smb client fixes from Steve French:
"Two fixes for Windows symlink handling"
* tag '6.12-rc2-cifs-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix creating native symlinks pointing to current or parent directory
cifs: Improve creating native symlinks pointing to directory
Pull USB fixes from Greg KH:
"Here are some small USB fixes for some reported problems for 6.12-rc3.
Include in here is:
- fix for yurex driver that was caused in -rc1
- build error fix for usbg network filesystem code
- onboard_usb_dev build fix
- dwc3 driver fixes for reported errors
- gadget driver fix
- new USB storage driver quirk
- xhci resume bugfix
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
net/9p/usbg: Fix build error
USB: yurex: kill needless initialization in yurex_read
Revert "usb: yurex: Replace snprintf() with the safer scnprintf() variant"
usb: xhci: Fix problem with xhci resume from suspend
usb: misc: onboard_usb_dev: introduce new config symbol for usb5744 SMBus support
usb: dwc3: core: Stop processing of pending events if controller is halted
usb: dwc3: re-enable runtime PM after failed resume
usb: storage: ignore bogus device raised by JieLi BR21 USB sound chip
usb: gadget: core: force synchronous registration
Pull driver core fixes from Greg KH:
"Here is a single driver core fix, and a .mailmap update.
The fix is for the rust driver core bindings, turned out that the
from_raw binding wasn't a good idea (don't want to pass a pointer to a
reference counted object without actually incrementing the pointer.)
So this change fixes it up as the from_raw binding came in in -rc1.
The other change is a .mailmap update.
Both have been in linux-next for a while with no reported issues"
* tag 'driver-core-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
mailmap: update mail for Fiona Behrens
rust: device: change the from_raw() function
Pull powerpc fix from Michael Ellerman:
- Fix crash in memcpy on 8xx due to dcbz workaround since recent
changes
Thanks to Christophe Leroy.
* tag 'powerpc-6.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/8xx: Fix kernel DTLB miss on dcbz
Pull SCSI fixes from James Bottomley:
"Four small fixes, three in drivers and one in the FC transport class
to add idempotence to state setting"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_transport_fc: Allow setting rport state to current state
scsi: wd33c93: Don't use stale scsi_pointer value
scsi: fnic: Move flush_work initialization out of if block
scsi: ufs: Use pre-calculated offsets in ufshcd_init_lrb()
Pull hwmon fixes from Guenter Roeck:
- Add missing dependencies on REGMAP_I2C for several drivers
- Fix memory leak in adt7475 driver
- Relabel Columbiaville temperature sensor in intel-m10-bmc-hwmon
driver to match other sensor labels
* tag 'hwmon-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (max1668) Add missing dependency on REGMAP_I2C
hwmon: (ltc2991) Add missing dependency on REGMAP_I2C
hwmon: (adt7470) Add missing dependency on REGMAP_I2C
hwmon: (adm9240) Add missing dependency on REGMAP_I2C
hwmon: (mc34vr500) Add missing dependency on REGMAP_I2C
hwmon: (tmp513) Add missing dependency on REGMAP_I2C
hwmon: (adt7475) Fix memory leak in adt7475_fan_pwm_config()
hwmon: intel-m10-bmc-hwmon: relabel Columbiaville to CVL Die Temperature
Pull kselftest fixes from Shuah Khan:
"Fixes for build, run-time errors, and reporting errors:
- ftrace: regression test for a kernel crash when running function
graph tracing and then enabling function profiler.
- rseq: fix for mm_cid test failure.
- vDSO:
- fixes to reporting skip and other error conditions
- changes unconditionally build chacha and getrandom tests on all
architectures to make it easier for them to run in CIs
- build error when sched.h to bring in CLONE_NEWTIME define"
* tag 'linux_kselftest-fixes-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
ftrace/selftest: Test combination of function_graph tracer and function profiler
selftests/rseq: Fix mm_cid test failure
selftests: vDSO: Explicitly include sched.h
selftests: vDSO: improve getrandom and chacha error messages
selftests: vDSO: unconditionally build getrandom test
selftests: vDSO: unconditionally build chacha test
Pull devicetree fixes from Rob Herring:
- Disable kunit tests for arm64+ACPI
- Fix refcount issue in kunit tests
- Drop constraints on non-conformant 'interrupt-map' in fsl,ls-extirq
- Drop type ref on 'msi-parent in fsl,qoriq-mc binding
- Move elgin,jg10309-01 to its own binding from trivial-devices
* tag 'devicetree-fixes-for-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: Skip kunit tests when arm64+ACPI doesn't populate root node
of: Fix unbalanced of node refcount and memory leaks
dt-bindings: interrupt-controller: fsl,ls-extirq: workaround wrong interrupt-map number
dt-bindings: misc: fsl,qoriq-mc: remove ref for msi-parent
dt-bindings: display: elgin,jg10309-01: Add own binding
Pull fbdev platform driver fix from Helge Deller:
"Switch fbdev drivers back to struct platform_driver::remove()
Now that 'remove()' has been converted to the sane new API, there's
no reason for the 'remove_new()' use, so this converts back to the
traditional and simpler name.
See commits
5c5a7680e6 ("platform: Provide a remove callback that returns no value")
0edb555a65 ("platform: Make platform_driver::remove() return void")
for background to this all"
* tag 'fbdev-for-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: Switch back to struct platform_driver::remove()
Pull gpio fixes from Bartosz Golaszewski:
- fix clock handle leak in probe() error path in gpio-aspeed
- add a dummy register read to ensure the write actually completed
* tag 'gpio-fixes-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: aspeed: Use devm_clk api to manage clock source
gpio: aspeed: Add the flush write to ensure the write complete.
Pull NFS client fixes from Anna Schumaker:
"Localio Bugfixes:
- remove duplicated include in localio.c
- fix race in NFS calls to nfsd_file_put_local() and nfsd_serv_put()
- fix Kconfig for NFS_COMMON_LOCALIO_SUPPORT
- fix nfsd_file tracepoints to handle NULL rqstp pointers
Other Bugfixes:
- fix program selection loop in svc_process_common
- fix integer overflow in decode_rc_list()
- prevent NULL-pointer dereference in nfs42_complete_copies()
- fix CB_RECALL performance issues when using a large number of
delegations"
* tag 'nfs-for-6.12-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: remove revoked delegation from server's delegation list
nfsd/localio: fix nfsd_file tracepoints to handle NULL rqstp
nfs_common: fix Kconfig for NFS_COMMON_LOCALIO_SUPPORT
nfs_common: fix race in NFS calls to nfsd_file_put_local() and nfsd_serv_put()
NFSv4: Prevent NULL-pointer dereference in nfs42_complete_copies()
SUNRPC: Fix integer overflow in decode_rc_list()
sunrpc: fix prog selection loop in svc_process_common
nfs: Remove duplicated include in localio.c
Pull RCU fix from Neeraj Upadhyay:
"Fix rcuog kthread wakeup invocation from softirq context on a CPU
which has been marked offline.
This can happen when new callbacks are enqueued from a softirq on an
offline CPU before it calls rcutree_report_cpu_dead(). When this
happens on NOCB configuration, the rcuog wake-up is deferred through
an IPI to an online CPU. This is done to avoid call into the scheduler
which can risk arming the RT-bandwidth after hrtimers have been
migrated out and disabled.
However, doing IPI call from softirq is not allowed: Fix this by
forcing deferred rcuog wakeup through the NOCB timer when the CPU is
offline"
* tag 'rcu.fixes.6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux:
rcu/nocb: Fix rcuog wake-up from offline softirq
Pull xen fix from Juergen Gross:
"A fix for topology information of Xen PV guests"
* tag 'for-linus-6.12a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: mark boot CPU of PV guest in MSR_IA32_APICBASE
Pull io_uring fixes from Jens Axboe:
- Explicitly have a mshot_finished condition for IORING_OP_RECV in
multishot mode, similarly to what IORING_OP_RECVMSG has. This doesn't
fix a bug right now, but it makes it harder to actually have a bug
here if a request takes multiple iterations to finish.
- Fix handling of retry of read/write of !FMODE_NOWAIT files. If they
are pollable, that's all we need.
* tag 'io_uring-6.12-20241011' of git://git.kernel.dk/linux:
io_uring/rw: allow pollable non-blocking attempts for !FMODE_NOWAIT
io_uring/rw: fix cflags posting for single issue multishot read
Pull power management fixes from Rafael Wysocki:
"These address two issues in the TPMI module of the Intel RAPL power
capping driver and one issue in the processor part of the Intel
int340x thermal driver, update a CPU ID list and register definitions
needed for RAPL PL4 support and remove some unused code.
Specifics:
- Fix the TPMI_RAPL_REG_DOMAIN_INFO register offset in the TPMI part
of the Intel RAPL power capping driver, make it ignore minor
hardware version mismatches (which only indicate exposing
additional features) and update register definitions in it to
enable PL4 support (Zhang Rui)
- Add Arrow Lake-U to the list of processors supporting PL4 in the
MSR part of the Intel RAPL power capping driver (Sumeet Pawnikar)
- Remove excess pci_disable_device() calls from the processor part of
the int340x thermal driver to address a warning triggered during
module unload and remove unused CPU hotplug code related to RAPL
support from it (Zhang Rui)"
* tag 'pm-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: int340x: processor: Add MMIO RAPL PL4 support
thermal: intel: int340x: processor: Remove MMIO RAPL CPU hotplug support
powercap: intel_rapl_msr: Add PL4 support for Arrowlake-U
powercap: intel_rapl_tpmi: Ignore minor version change
thermal: intel: int340x: processor: Fix warning during module unload
powercap: intel_rapl_tpmi: Fix bogus register reading
Pull thermal control fixes from Rafael Wysocki:
"Address possible use-after-free scenarios during the processing of
thermal netlink commands and during thermal zone removal (Rafael
Wysocki)"
* tag 'thermal-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Free tzp copy along with the thermal zone
thermal: core: Reference count the zone in thermal_zone_get_by_id()
Pull ACPI fixes from Rafael Wysocki:
"Reduce the number of ACPI IRQ override DMI quirks by combining quirks
that cover similar systems while making them cover additional models
at the same time (Hans de Goede)"
* tag 'acpi-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: resource: Fold Asus Vivobook Pro N6506M* DMI quirks together
ACPI: resource: Fold Asus ExpertBook B1402C* and B1502C* DMI quirks together
ACPI: resource: Make Asus ExpertBook B2502 matches cover more models
ACPI: resource: Make Asus ExpertBook B2402 matches cover more models
Pull pmdomain fixes from Ulf Hansson:
"pmdomain core:
- Fix alloc/free in dev_pm_domain_attach|detach_list()
pmdomain providers:
- qcom: Fix the return of uninitialized variable
pmdomain consumers:
- drm/tegra/gr3d: Revert conversion to dev_pm_domain_attach|detach_list()
OPP core:
- Fix error code in dev_pm_opp_set_config()"
* tag 'pmdomain-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
PM: domains: Fix alloc/free in dev_pm_domain_attach|detach_list()
Revert "drm/tegra: gr3d: Convert into dev_pm_domain_attach|detach_list()"
pmdomain: qcom-cpr: Fix the return of uninitialized variable
OPP: fix error code in dev_pm_opp_set_config()
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Prevent splat from warning when setting maximum DMA segment
MMC host:
- mvsdio: Drop sg_miter support for PIO as it didn't work
- sdhci-of-dwcmshc: Prevent stale interrupt for the T-Head 1520
variant"
* tag 'mmc-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-of-dwcmshc: Prevent stale command interrupt handling
Revert "mmc: mvsdio: Use sg_miter for PIO"
mmc: core: Only set maximum DMA segment size if DMA is supported
Pull ata fixes from Niklas Cassel:
- Fix a hibernate regression where the disk was needlessly spun down
and then immediately spun up both when entering and when resuming
from hibernation (me)
- Update the MAINTAINERS file to remove remnants from Jens
maintainership of libata (Damien)
* tag 'ata-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata: Update MAINTAINERS file
ata: libata: avoid superfluous disk spin down + spin up during hibernation
