Pull bpf fixes from Alexei Starovoitov:
- Fix incorrect usage of BPF_TRAMP_F_ORIG_STACK in riscv JIT (Menglong
Dong)
- Fix reference count leak in bpf_prog_test_run_xdp() (Tetsuo Handa)
- Fix metadata size check in bpf_test_run() (Toke Høiland-Jørgensen)
- Check that BPF insn array is not allowed as a map for const strings
(Deepanshu Kartikey)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix reference count leak in bpf_prog_test_run_xdp()
bpf: Reject BPF_MAP_TYPE_INSN_ARRAY in check_reg_const_str()
selftests/bpf: Update xdp_context_test_run test to check maximum metadata size
bpf, test_run: Subtract size of xdp_frame from allowed metadata size
riscv, bpf: Fix incorrect usage of BPF_TRAMP_F_ORIG_STACK
Pull x86 kvm fixes from Paolo Bonzini:
- Avoid freeing stack-allocated node in kvm_async_pf_queue_task
- Clear XSTATE_BV[i] in guest XSAVE state whenever XFD[i]=1
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
selftests: kvm: Verify TILELOADD actually #NM faults when XFD[18]=1
selftests: kvm: try getting XFD and XSAVE state out of sync
selftests: kvm: replace numbered sync points with actions
x86/fpu: Clear XSTATE_BV[i] in guest XSAVE state whenever XFD[i]=1
x86/kvm: Avoid freeing stack-allocated node in kvm_async_pf_queue_task
Pull x86 fix from Ingo Molnar:
"Disable GCOV instrumentation in the SEV noinstr.c collection of SEV
noinstr methods, to further robustify the code"
* tag 'x86-urgent-2026-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Disable GCOV on noinstr object
In a vain attempt to consolidate the email zoo switch everything to the
kernel.org account.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull RISC-V fixes from Paul Walmsley:
"Notable changes include a fix to close one common microarchitectural
attack vector for out-of-order cores. Another patch exposed an
omission in my boot test coverage, which is currently missing
relocatable kernels. Otherwise, the fixes seem to be settling down for
us.
- Fix CONFIG_RELOCATABLE=y boots by building Image files from
vmlinux, rather than vmlinux.unstripped, now that the .modinfo
section is included in vmlinux.unstripped
- Prevent branch predictor poisoning microarchitectural attacks that
use the syscall index as a vector by using array_index_nospec() to
clamp the index after the bounds check (as x86 and ARM64 already
do)
- Fix a crash in test_kprobes when building with Clang
- Fix a deadlock possible when tracing is enabled for SBI ecalls
- Fix the definition of the Zk standard RISC-V ISA extension bundle,
which was missing the Zknh extension
- A few other miscellaneous non-functional cleanups, removing unused
macros, fixing an out-of-date path in code comments, resolving a
compile-time warning for a type mismatch in a pr_crit(), and
removing an unnecessary header file inclusion"
* tag 'riscv-for-linus-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: trace: fix snapshot deadlock with sbi ecall
riscv: remove irqflags.h inclusion in asm/bitops.h
riscv: cpu_ops_sbi: smp_processor_id() returns int, not unsigned int
riscv: configs: Clean up references to non-existing configs
riscv: kexec_image: Fix dead link to boot-image-header.rst
riscv: pgtable: Cleanup useless VA_USER_XXX definitions
riscv: cpufeature: Fix Zk bundled extension missing Zknh
riscv: fix KUnit test_kprobes crash when building with Clang
riscv: Sanitize syscall table indexing under speculation
riscv: boot: Always make Image from vmlinux, not vmlinux.unstripped
When loading guest XSAVE state via KVM_SET_XSAVE, and when updating XFD in
response to a guest WRMSR, clear XFD-disabled features in the saved (or to
be restored) XSTATE_BV to ensure KVM doesn't attempt to load state for
features that are disabled via the guest's XFD. Because the kernel
executes XRSTOR with the guest's XFD, saving XSTATE_BV[i]=1 with XFD[i]=1
will cause XRSTOR to #NM and panic the kernel.
E.g. if fpu_update_guest_xfd() sets XFD without clearing XSTATE_BV:
------------[ cut here ]------------
WARNING: arch/x86/kernel/traps.c:1524 at exc_device_not_available+0x101/0x110, CPU#29: amx_test/848
Modules linked in: kvm_intel kvm irqbypass
CPU: 29 UID: 1000 PID: 848 Comm: amx_test Not tainted 6.19.0-rc2-ffa07f7fd437-x86_amx_nm_xfd_non_init-vm #171 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:exc_device_not_available+0x101/0x110
Call Trace:
<TASK>
asm_exc_device_not_available+0x1a/0x20
RIP: 0010:restore_fpregs_from_fpstate+0x36/0x90
switch_fpu_return+0x4a/0xb0
kvm_arch_vcpu_ioctl_run+0x1245/0x1e40 [kvm]
kvm_vcpu_ioctl+0x2c3/0x8f0 [kvm]
__x64_sys_ioctl+0x8f/0xd0
do_syscall_64+0x62/0x940
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
---[ end trace 0000000000000000 ]---
This can happen if the guest executes WRMSR(MSR_IA32_XFD) to set XFD[18] = 1,
and a host IRQ triggers kernel_fpu_begin() prior to the vmexit handler's
call to fpu_update_guest_xfd().
and if userspace stuffs XSTATE_BV[i]=1 via KVM_SET_XSAVE:
------------[ cut here ]------------
WARNING: arch/x86/kernel/traps.c:1524 at exc_device_not_available+0x101/0x110, CPU#14: amx_test/867
Modules linked in: kvm_intel kvm irqbypass
CPU: 14 UID: 1000 PID: 867 Comm: amx_test Not tainted 6.19.0-rc2-2dace9faccd6-x86_amx_nm_xfd_non_init-vm #168 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:exc_device_not_available+0x101/0x110
Call Trace:
<TASK>
asm_exc_device_not_available+0x1a/0x20
RIP: 0010:restore_fpregs_from_fpstate+0x36/0x90
fpu_swap_kvm_fpstate+0x6b/0x120
kvm_load_guest_fpu+0x30/0x80 [kvm]
kvm_arch_vcpu_ioctl_run+0x85/0x1e40 [kvm]
kvm_vcpu_ioctl+0x2c3/0x8f0 [kvm]
__x64_sys_ioctl+0x8f/0xd0
do_syscall_64+0x62/0x940
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
---[ end trace 0000000000000000 ]---
The new behavior is consistent with the AMX architecture. Per Intel's SDM,
XSAVE saves XSTATE_BV as '0' for components that are disabled via XFD
(and non-compacted XSAVE saves the initial configuration of the state
component):
If XSAVE, XSAVEC, XSAVEOPT, or XSAVES is saving the state component i,
the instruction does not generate #NM when XCR0[i] = IA32_XFD[i] = 1;
instead, it operates as if XINUSE[i] = 0 (and the state component was
in its initial state): it saves bit i of XSTATE_BV field of the XSAVE
header as 0; in addition, XSAVE saves the initial configuration of the
state component (the other instructions do not save state component i).
Alternatively, KVM could always do XRSTOR with XFD=0, e.g. by using
a constant XFD based on the set of enabled features when XSAVEing for
a struct fpu_guest. However, having XSTATE_BV[i]=1 for XFD-disabled
features can only happen in the above interrupt case, or in similar
scenarios involving preemption on preemptible kernels, because
fpu_swap_kvm_fpstate()'s call to save_fpregs_to_fpstate() saves the
outgoing FPU state with the current XFD; and that is (on all but the
first WRMSR to XFD) the guest XFD.
Therefore, XFD can only go out of sync with XSTATE_BV in the above
interrupt case, or in similar scenarios involving preemption on
preemptible kernels, and it we can consider it (de facto) part of KVM
ABI that KVM_GET_XSAVE returns XSTATE_BV[i]=0 for XFD-disabled features.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 820a6ee944 ("kvm: x86: Add emulation for IA32_XFD", 2022-01-14)
Signed-off-by: Sean Christopherson <seanjc@google.com>
[Move clearing of XSTATE_BV from fpu_copy_uabi_to_guest_fpstate
to kvm_vcpu_ioctl_x86_set_xsave. - Paolo]
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull arm64 fixes from Catalin Marinas:
- Do not return false if !preemptible() in current_in_efi(). EFI
runtime services can now run with preemption enabled
- Fix uninitialised variable in the arm MPAM driver, reported by sparse
- Fix partial kasan_reset_tag() use in change_memory_common() when
calculating page indices or comparing ranges
- Save/restore TCR2_EL1 during suspend/resume, otherwise the E0POE bit
is lost
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix cleared E0POE bit after cpu_suspend()/resume()
arm64: mm: Fix incomplete tag reset in change_memory_common()
arm_mpam: Stop using uninitialized variables in __ris_msmon_read()
arm64/efi: Don't fail check current_in_efi() if preemptible
Pull SoC fixes from Arnd Bergmann:
"The main code change is a revert of the Raspberry Pi RP1 overlay
support that was decided to not be ready.
The other fixes are all for devicetree sources:
- ethernet configuration on ixp42x-actiontec-mi424wr is board
revision specific
- validation warning fixes for imx27/imx51/imx6, hikey960 and k3
- Minor corrections across imx8 boards, addressing all types of
issues with interrups, dma, ethernet and clock settings, all simple
one-line changes"
* tag 'soc-fixes-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
arm64: dts: hisilicon: hikey960: Drop "snps,gctl-reset-quirk" and "snps,tx_de_emphasis*" properties
Documentation/process: maintainer-soc: Mark 'make' as commands
Documentation/process: maintainer-soc: Be more explicit about defconfig
arm64: dts: mba8mx: Fix Ethernet PHY IRQ support
arm64: dts: imx8qm-ss-dma: correct the dma channels of lpuart
arm64: dts: imx8mp: Fix LAN8740Ai PHY reference clock on DH electronics i.MX8M Plus DHCOM
arm64: dts: freescale: tx8p-ml81: fix eqos nvmem-cells
arm64: dts: freescale: moduline-display: fix compatible
dt-bindings: arm: fsl: moduline-display: fix compatible
ARM: dts: imx6q-ba16: fix RTC interrupt level
arm64: dts: freescale: imx95-toradex-smarc: fix SMARC_SDIO_WP label position
arm64: dts: freescale: imx95-toradex-smarc: use edge trigger for ethphy1 interrupt
arm64: dts: add off-on-delay-us for usdhc2 regulator
arm64: dts: imx8qm-mek: correct the light sensor interrupt type to low level
ARM: dts: nxp: imx: Fix mc13xxx LED node names
arm64: dts: imx95: correct I3C2 pclk to IMX95_CLK_BUSWAKEUP
MAINTAINERS: Fix a linusw mail address
arm64: dts: broadcom: rp1: drop RP1 overlay
arm64: dts: broadcom: bcm2712: fix RP1 endpoint PCI topology
misc: rp1: drop overlay support
...
Pull PCI fixes from Bjorn Helgaas:
- Remove ASPM L0s support for MSM8996 SoC since we now enable L0s when
advertised, and it caused random hangs on this device (Manivannan
Sadhasivam)
- Fix meson-pcie to report that the link is up while in ASPM L0s or L1,
since those are active states from the software point of view, and
treating the link as down caused config access failures (Bjorn
Helgaas)
- Fix up sparc DTS BAR descriptions that are above 4GB but not marked
as prefetchable, which caused resource assignment and driver probe
failures after we converted from the SPARC pcibios_enable_device() to
the generic version (Ilpo Järvinen)
* tag 'pci-v6.19-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
sparc/PCI: Correct 64-bit non-pref -> pref BAR resources
PCI: meson: Report that link is up while in ASPM L0s and L1 states
PCI: qcom: Remove ASPM L0s support for MSM8996 SoC
TCR2_ELx.E0POE is set during smp_init().
However, this bit is not reprogrammed when the CPU enters suspension and
later resumes via cpu_resume(), as __cpu_setup() does not re-enable E0POE
and there is no save/restore logic for the TCR2_ELx system register.
As a result, the E0POE feature no longer works after cpu_resume().
To address this, save and restore TCR2_EL1 in the cpu_suspend()/cpu_resume()
path, rather than adding related logic to __cpu_setup(), taking into account
possible future extensions of the TCR2_ELx feature.
Fixes: bf83dae90f ("arm64: enable the Permission Overlay Extension for EL0")
Cc: <stable@vger.kernel.org> # 6.12.x
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Running KASAN KUnit tests with {HW,SW}_TAGS mode triggers a fault in
change_memory_common():
Call trace:
change_memory_common+0x168/0x210 (P)
set_memory_ro+0x20/0x48
vmalloc_helpers_tags+0xe8/0x338
kunit_try_run_case+0x74/0x188
kunit_generic_run_threadfn_adapter+0x30/0x70
kthread+0x11c/0x200
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
# vmalloc_helpers_tags: try faulted
not ok 67 vmalloc_helpers_tags
Commit a06494adb7 ("arm64: mm: use untagged address to calculate page index")
fixed a KASAN warning in the BPF subsystem by adding kasan_reset_tag() to
the index calculation. In the execmem flow:
bpf_prog_pack_alloc()
-> bpf_jit_alloc_exec()
-> execmem_alloc()
The returned address from execmem_vmalloc/execmem_cache_alloc is passed
through kasan_reset_tag(), so start has no tag while area->addr still
retains the original tag. The fix correctly handled this case by resetting
the tag on area->addr:
(start - (unsigned long)kasan_reset_tag(area->addr)) >> PAGE_SHIFT
However, in normal vmalloc paths, both start and area->addr have matching
tags(or no tags). Resetting only area->addr causes a mismatch when
subtracting a tagged address from an untagged one, resulting in an
incorrect index.
Fix this by resetting tags on both addresses in the index calculation.
This ensures correct results regardless of the tag state of either address.
Tested with KASAN KUnit tests under CONFIG_KASAN_GENERIC,
CONFIG_KASAN_SW_TAGS, and CONFIG_KASAN_HW_TAGS - all pass. Also verified
the original BPF KASAN warning from [1] is still fixed.
[1] https://lore.kernel.org/all/20251118164115.GA3977565@ax162/
Fixes: a06494adb7 ("arm64: mm: use untagged address to calculate page index")
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
If sbi_ecall.c's functions are traceable,
echo "__sbi_ecall:snapshot" > /sys/kernel/tracing/set_ftrace_filter
may get the kernel into a deadlock.
(Functions in sbi_ecall.c are excluded from tracing if
CONFIG_RISCV_ALTERNATIVE_EARLY is set.)
__sbi_ecall triggers a snapshot of the ringbuffer. The snapshot code
raises an IPI interrupt, which results in another call to __sbi_ecall
and another snapshot...
All it takes to get into this endless loop is one initial __sbi_ecall.
On RISC-V systems without SSTC extension, the clock events in
timer-riscv.c issue periodic sbi ecalls, making the problem easy to
trigger.
Always exclude the sbi_ecall.c functions from tracing to fix the
potential deadlock.
sbi ecalls can easiliy be logged via trace events, excluding ecall
functions from function tracing is not a big limitation.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://patch.msgid.link/20251223135043.1336524-1-martin@kaiser.cx
Signed-off-by: Paul Walmsley <pjw@kernel.org>
SPARC T5-2 dts describes some PCI BARs as 64-bit resources without the
pref(etchable) bit (0x83... vs 0xc3... in assigned-addresses) for address
ranges above the 4G threshold. Such resources cannot be placed into a
non-prefetchable PCI bridge window that is capable only of 32-bit
addressing. As such, it looks like the platform is improperly described by
the dts.
The kernel detects this problem (see the IORESOURCE_PREFETCH check in
pci_find_parent_resource()) and fails to assign these BAR resources to the
resource tree due to lack of a compatible bridge window.
Prior to 754babaaf3 ("sparc/PCI: Remove pcibios_enable_device() as they
do nothing extra") SPARC arch code did not test whether device resources
were successfully in the resource tree when enabling a device, effectively
hiding the problem. After removing the arch-specific enable code,
pci_enable_resources() refuses to enable the device when it finds not all
mem resources are assigned, and therefore mpt3sas can't be enabled:
pci 0001:04:00.0: reg 0x14: [mem 0x801110000000-0x80111000ffff 64bit]
pci 0001:04:00.0: reg 0x1c: [mem 0x801110040000-0x80111007ffff 64bit]
pci 0001:04:00.0: BAR 1 [mem 0x801110000000-0x80111000ffff 64bit]: can't claim; no compatible bridge window
pci 0001:04:00.0: BAR 3 [mem 0x801110040000-0x80111007ffff 64bit]: can't claim; no compatible bridge window
mpt3sas 0001:04:00.0: BAR 1 [mem size 0x00010000 64bit]: not assigned; can't enable device
For clarity, this filtered log only shows failures for one mpt3sas device
but other devices fail similarly. In the reported case, the end result with
all the failures is an unbootable system.
Things appeared to "work" before 754babaaf3 ("sparc/PCI: Remove
pcibios_enable_device() as they do nothing extra") because the resource
tree is agnostic to whether PCI BAR resources are properly in the tree or
not. So as long as there was a parent resource (e.g. a root bus resource)
that contains the address range, the resource tree code just places
resource request underneath it without any consideration to the
intermediate BAR resource. While it worked, it's incorrect setup still.
Add an OF fixup to set the IORESOURCE_PREFETCH flag for a 64-bit PCI
resource that has the end address above 4G requiring placement into the
prefetchable window. Also log the issue.
Fixes: 754babaaf3 ("sparc/PCI: Remove pcibios_enable_device() as they do nothing extra")
Reported-by: Nathaniel Roach <nroach44@gmail.com>
Closes: https://github.com/sparclinux/issues/issues/22
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Nathaniel Roach <nroach44@gmail.com>
Link: https://patch.msgid.link/20251124170411.3709-1-ilpo.jarvinen@linux.intel.com
The arch/riscv/include/asm/bitops.h does not functionally require
including /linux/irqflags.h. Additionally, adding
arch/riscv/include/asm/percpu.h causes a circular inclusion:
kernel/bounds.c
->include/linux/log2.h
->include/linux/bitops.h
->arch/riscv/include/asm/bitops.h
->include/linux/irqflags.h
->include/linux/find.h
->return val ? __ffs(val) : size;
->arch/riscv/include/asm/bitops.h
The compilation log is as follows:
CC kernel/bounds.s
In file included from ./include/linux/bitmap.h:11,
from ./include/linux/cpumask.h:12,
from ./arch/riscv/include/asm/processor.h:55,
from ./arch/riscv/include/asm/thread_info.h:42,
from ./include/linux/thread_info.h:60,
from ./include/asm-generic/preempt.h:5,
from ./arch/riscv/include/generated/asm/preempt.h:1,
from ./include/linux/preempt.h:79,
from ./arch/riscv/include/asm/percpu.h:8,
from ./include/linux/irqflags.h:19,
from ./arch/riscv/include/asm/bitops.h:14,
from ./include/linux/bitops.h:68,
from ./include/linux/log2.h:12,
from kernel/bounds.c:13:
./include/linux/find.h: In function 'find_next_bit':
./include/linux/find.h:66:30: error: implicit declaration of function '__ffs' [-Wimplicit-function-declaration]
66 | return val ? __ffs(val) : size;
| ^~~~~
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Acked-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Link: https://patch.msgid.link/20251216014721.42262-2-cuiyunhui@bytedance.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
"snps,tx_de_emphasis" is supposed to be a u8, not a u32. Since it is big
endian, 0 will be read rather than 1. The DWC3 Linux driver simply ORs
the value if "snps,tx_de_emphasis_quirk" is set, so the 2 properties
have no effect. (The driver doesn't clear the field either which is
another problem).
"snps,gctl-reset-quirk" is not documented nor used in the driver, so
drop it as well.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260105174002.2997615-1-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX fixes for 6.19:
- A mba8mx fix from Alexander Stein to correct Ethernet PHY IRQ trigger
type
- An i.MX95 fix from Carlos Song to correct I3C2 pclk
- A couple of imx8qm-mek changes from Haibo Chen to fix light sensor
interrupt type and usdhc2 regulator configuration
- An imx6q-ba16 change from Ian Ray to fix RTC interrupt level
- An imx8mp-dhcom-som change from Marek Vasut to fix sporadic Ethernet
link bouncing caused by interruptions on the PHY reference clock
- A couple of imx8mp-tx8p changes from Maud Spierings to fix compatible
and eqos nvmem-cells
- An ARM i.MX fix from Rob Herring to correct mc13xxx LED node names
- An imx8qm-ss-dma change from Sherry Sun to correct DMA channels for
LPUART
- A couple of imx95-toradex-smarc changes from Vitor Soares to fix
ethphy1 interrupt and SMARC_SDIO_WP label position
* tag 'imx-fixes-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: mba8mx: Fix Ethernet PHY IRQ support
arm64: dts: imx8qm-ss-dma: correct the dma channels of lpuart
arm64: dts: imx8mp: Fix LAN8740Ai PHY reference clock on DH electronics i.MX8M Plus DHCOM
arm64: dts: freescale: tx8p-ml81: fix eqos nvmem-cells
arm64: dts: freescale: moduline-display: fix compatible
dt-bindings: arm: fsl: moduline-display: fix compatible
ARM: dts: imx6q-ba16: fix RTC interrupt level
arm64: dts: freescale: imx95-toradex-smarc: fix SMARC_SDIO_WP label position
arm64: dts: freescale: imx95-toradex-smarc: use edge trigger for ethphy1 interrupt
arm64: dts: add off-on-delay-us for usdhc2 regulator
arm64: dts: imx8qm-mek: correct the light sensor interrupt type to low level
ARM: dts: nxp: imx: Fix mc13xxx LED node names
arm64: dts: imx95: correct I3C2 pclk to IMX95_CLK_BUSWAKEUP
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom ARM64-SoC Device Tree fixes for
6.19, please pull the following:
- Andrea fixes the RP1 DeviceTree hierarchy and drop overlay support,
this resolves a number of DTC warnings and other issues
* tag 'arm-soc/for-6.19/devicetree-arm64-fixes' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: rp1: drop RP1 overlay
arm64: dts: broadcom: bcm2712: fix RP1 endpoint PCI topology
misc: rp1: drop overlay support
dt-bindings: misc: pci1de4,1: add required reg property for endpoint
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
As EFI runtime services can now be run without disabling preemption remove
the check for non preemptible in current_in_efi(). Without this change,
firmware errors that were previously recovered from by
__efi_runtime_kernel_fixup_exception() will lead to a kernel oops.
Fixes: a5baf582f4 ("arm64/efi: Call EFI runtime services without disabling preemption")
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Richard Lyu <richard.lyu@suse.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The Zk extension is a bundle consisting of Zkn, Zkr, and Zkt. The Zkn
extension itself is a bundle consisting of Zbkb, Zbkc, Zbkx, Zknd, Zkne,
and Zknh.
The current implementation of riscv_zk_bundled_exts manually listed
the dependencies but missed RISCV_ISA_EXT_ZKNH.
Fix this by introducing a RISCV_ISA_EXT_ZKN macro that lists the Zkn
components and using it in both riscv_zk_bundled_exts and
riscv_zkn_bundled_exts.
This adds the missing Zknh extension to Zk and reduces code duplication.
Fixes: 0d8295ed97 ("riscv: add ISA extension parsing for scalar crypto")
Link: https://patch.msgid.link/20231114141256.126749-4-cleger@rivosinc.com/
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Link: https://patch.msgid.link/20251223-zk-missing-zknh-v1-1-b627c990ee1a@riscstar.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
With Debian clang version 19.1.7 (3+build5) there are calls to
kasan_check_write() from __sev_es_nmi_complete(), which violates noinstr. Fix
it by disabling GCOV for the noinstr object, as has been done for previous
such instrumentation issues.
Note that this file already disables __SANITIZE_ADDRESS__ and
__SANITIZE_THREAD__, thus calls like kasan_check_write() ought to be nops
regardless of GCOV. This has been fixed in other patches. However, to avoid
any other accidental instrumentation showing up, (and since, in principle GCOV
is instrumentation and hence should be disabled for noinstr code anyway),
disable GCOV overall as well.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Marco Elver <elver@google.com>
Link: https://patch.msgid.link/20251216-gcov-inline-noinstr-v3-3-10244d154451@google.com
Pull x86 fix from Ingo Molnar:
"Fix the AMD microcode Entrysign signature checking code to include
more models"
* tag 'x86-urgent-2026-01-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Fix Entrysign revision check for Zen5/Strix Halo
kvm_async_pf_queue_task() can incorrectly try to kfree() a node
allocated on the stack of kvm_async_pf_task_wait_schedule().
This occurs when a task requests a PF while another task's PF request
with the same token is still pending. Since the token is derived from
the (u32)address in exc_page_fault(), two different tasks can generate
the same token.
Currently, kvm_async_pf_queue_task() assumes that any entry found in the
list is a dummy entry and tries to kfree() it. To fix this, add a flag
to the node structure to distinguish stack-allocated nodes, and only
kfree() the node if it is a dummy entry.
Signed-off-by: Ryosuke Yasuoka <ryasuoka@redhat.com>
Message-ID: <20251206140939.144038-1-ryasuoka@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enhance the bpf_arch_text_poke() function to enable accurate location
of BPF program entry points.
When modifying the entry point of a BPF program, skip the "move t0, ra"
instruction to ensure the correct logic and copy of the jump address.
Cc: stable@vger.kernel.org
Fixes: 677e6123e3 ("LoongArch: BPF: Disable trampoline for kernel module function trace")
Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Remove the previous restrictions that blocked the tracing of kernel
module functions. Fix the issue that previously caused kernel lockups
when attempting to trace module functions.
Before entering the trampoline code, the return address register ra
shall store the address of the next assembly instruction after the
'bl trampoline' instruction, which is the traced function address, and
the register t0 shall store the parent function return address. Refine
the trampoline return logic to ensure that register data remains correct
when returning to both the traced function and the parent function.
Before this patch was applied, the module_attach test in selftests/bpf
encountered a deadlock issue. This was caused by an incorrect jump
address after the trampoline execution, which resulted in an infinite
loop within the module function.
Cc: stable@vger.kernel.org
Fixes: 677e6123e3 ("LoongArch: BPF: Disable trampoline for kernel module function trace")
Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Call the next bpf prog and skip the first instruction of TCC
initialization.
A total of 7 instructions are skipped:
'move t0, ra' 1 inst
'move_imm + jirl' 5 inst
'addid REG_TCC, zero, 0' 1 inst
Relevant test cases: the tailcalls test item in selftests/bpf.
Cc: stable@vger.kernel.org
Fixes: 677e6123e3 ("LoongArch: BPF: Disable trampoline for kernel module function trace")
Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Modify the build_prologue() function to ensure the return address
register ra is saved to t0 before entering trampoline operations.
This change ensures the accurate return address handling when a BPF
program calls another BPF program, preventing errors in the BPF-to-BPF
call chain.
Cc: stable@vger.kernel.org
Fixes: 677e6123e3 ("LoongArch: BPF: Disable trampoline for kernel module function trace")
Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The bpf_tail_call() index should be treated as a u32 value. Let's
zero-extend it to avoid calling wrong BPF progs. See similar fixes
for x86 [1]) and arm64 ([2]) for more details.
[1]: 90caccdd8c
[2]: 16338a9b3a
Cc: stable@vger.kernel.org
Fixes: 5dc615520c ("LoongArch: Add BPF JIT support")
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The kfunc calls are native calls so they should follow LoongArch calling
conventions. Sign extend its arguments properly to avoid kernel panic.
This is done by adding a new emit_abi_ext() helper. The emit_abi_ext()
helper performs extension in place meaning a value already store in the
target register (Note: this is different from the existing sign_extend()
helper and thus we can't reuse it).
Cc: stable@vger.kernel.org
Fixes: 5dc615520c ("LoongArch: Add BPF JIT support")
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Refactor the register restoration sequence in the ftrace_common_return
function to clearly distinguish between the logic of normal returns and
direct call returns in function tracing scenarios. The logic is as
follows:
1. In the case of a normal return, the execution flow returns to the
traced function, and ftrace must ensure that the register data is
consistent with the state when the function was entered.
ra = parent return address; t0 = traced function return address.
2. In the case of a direct call return, the execution flow jumps to the
custom trampoline function, and ftrace must ensure that the register
data is consistent with the state when ftrace was entered.
ra = traced function return address; t0 = parent return address.
Cc: stable@vger.kernel.org
Fixes: 9cdc3b6a29 ("LoongArch: ftrace: Add direct call support")
Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
This patch allows the LoongArch BPF JIT to handle recoverable memory
access errors generated by BPF_PROBE_MEM* instructions.
When a BPF program performs memory access operations, the instructions
it executes may trigger ADEM exceptions. The kernel’s built-in BPF
exception table mechanism (EX_TYPE_BPF) will generate corresponding
exception fixup entries in the JIT compilation phase; however, the
architecture-specific trap handling function needs to proactively call
the common fixup routine to achieve exception recovery.
do_ade(): fix EX_TYPE_BPF memory access exceptions for BPF programs,
ensure safe execution.
Relevant test cases: illegal address access tests in module_attach and
subprogs_extable of selftests/bpf.
Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
According to the following function definitions, __kernel_text_address()
already checks __module_text_address(), so it should remove the check of
__module_text_address() in bt_address() at least.
int __kernel_text_address(unsigned long addr)
{
if (kernel_text_address(addr))
return 1;
...
return 0;
}
int kernel_text_address(unsigned long addr)
{
bool no_rcu;
int ret = 1;
...
if (is_module_text_address(addr))
goto out;
...
return ret;
}
bool is_module_text_address(unsigned long addr)
{
guard(rcu)();
return __module_text_address(addr) != NULL;
}
Furthermore, there are two checks of __kernel_text_address(), one is in
bt_address() and the other is after calling bt_address(), it looks like
redundant.
Handle the exception address first and then use __kernel_text_address()
to validate the calculated address for exception or the normal address
in bt_address(), then it can remove the check of __kernel_text_address()
after calling bt_address().
Just remove unnecessary checks, no functional changes intended.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
For 32BIT platform _PAGE_PROTNONE is 0, so set a VMA to be VM_NONE or
VM_SHARED will make pages non-present, then cause Oops with kernel page
fault.
Fix it by set correct protection_map[] for VM_NONE/VM_SHARED, replacing
_PAGE_PROTNONE with _PAGE_PRESENT.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
According to the "LoongArch Reference Manual Volume 1: Basic
Architecture", begin with LA664 CPU core there are more features
supported which are indicated in CPUCFG2 and CPUCFG3. This patch
completes the definitions of them so as to match the architecture
specification.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Clang misinterprets the placement of test_kprobes_addresses and
test_kprobes_functions arrays when they are not explicitly assigned
to a data section. This can lead to kmalloc_array() allocation
errors and KUnit failures.
When testing the Clang-compiled code in QEMU, this warning was emitted:
WARNING: CPU: 1 PID: 3000 at mm/page_alloc.c:5159 __alloc_frozen_pages_noprof+0xe6/0x2fc mm/page_alloc.c:5159
Further investigation revealed that the test_kprobes_addresses array
appeared to have over 100,000 elements, including invalid addresses;
whereas, according to test-kprobes-asm.S, test_kprobes_addresses
should only have 25 elements.
When compiling the kernel with GCC, the kernel boots correctly.
This patch fixes the issue by adding .section .rodata to explicitly
place arrays in the read-only data segment.
For detailed debug and analysis, see:
https://github.com/j1akai/temp/blob/main/20251113/readme.md
v1 -> v2：
- Drop changes to .align, and .globl.
Signed-off-by: Jiakai Xu <xujiakai2025@iscas.ac.cn>
Signed-off-by: Jiakai Xu <jiakaiPeanut@gmail.com>
Link: https://patch.msgid.link/738dd4e2.ff73.19a7cd7b4d5.Coremail.xujiakai2025@iscas.ac.cn
Link: https://github.com/llvm/llvm-project/issues/168308
Link: https://patch.msgid.link/20251226032317.1523764-1-jiakaiPeanut@gmail.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The syscall number is a user-controlled value used to index into the
syscall table. Use array_index_nospec() to clamp this value after the
bounds check to prevent speculative out-of-bounds access and subsequent
data leakage via cache side channels.
Signed-off-by: Lukas Gerlach <lukas.gerlach@cispa.de>
Link: https://patch.msgid.link/20251218191332.35849-3-lukas.gerlach@cispa.de
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Since commit 4b47a3aefb ("kbuild: Restore pattern to avoid stripping
.rela.dyn from vmlinux") vmlinux has .rel*.dyn preserved. Therefore, use
vmlinux to produce Image, not vmlinux.unstripped.
Doing so fixes booting a RELOCATABLE=y Image with kexec. The problem is
caused by this chain of events:
- Since commit 3e86e4d74c ("kbuild: keep .modinfo section in
vmlinux.unstripped"), vmlinux.unstripped gets a .modinfo section.
- The .modinfo section has SHF_ALLOC, so it ends up in Image, at the end
of it.
- The Image header's image_size field does not expect to include
.modinfo and does not account for it, since it should not be in Image.
- If .modinfo is large enough, the file size of Image ends up larger
than image_size, which eventually leads to it failing
sanity_check_segment_list().
Using vmlinux instead of vmlinux.unstripped means that the unexpected
.modinfo section is gone from Image, fixing the file size problem.
Cc: stable@vger.kernel.org
Fixes: 3e86e4d74c ("kbuild: keep .modinfo section in vmlinux.unstripped")
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Han Gao <gaohan@iscas.ac.cn>
Link: https://patch.msgid.link/20251230-riscv-vmlinux-not-unstripped-v1-1-15f49df880df@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The commit 616effc027 ("arm64: dts: imx8: Fix lpuart DMA channel
order") swap uart rx and tx channel at common imx8-ss-dma.dtsi. But miss
update imx8qm-ss-dma.dtsi.
The commit 5a8e9b022e ("arm64: dts: imx8qm-ss-dma: Pass lpuart
dma-names") just simple add dma-names as binding doc requirement.
Correct lpuart0 - lpuart3 dma rx and tx channels, and use defines for
the FSL_EDMA_RX flag.
Fixes: 5a8e9b022e ("arm64: dts: imx8qm-ss-dma: Pass lpuart dma-names")
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add missing 'clocks' property to LAN8740Ai PHY node, to allow the PHY driver
to manage LAN8740Ai CLKIN reference clock supply. This fixes sporadic link
bouncing caused by interruptions on the PHY reference clock, by letting the
PHY driver manage the reference clock and assure there are no interruptions.
This follows the matching PHY driver recommendation described in commit
bedd8d78ab ("net: phy: smsc: LAN8710/20: add phy refclk in support")
Fixes: 8d6712695b ("arm64: dts: imx8mp: Add support for DH electronics i.MX8M Plus DHCOM and PDK2")
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Tested-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
On this SoM eqos is the primary ethernet interface, Ka-Ro fuses the
address for it in eth_mac1, eth_mac2 seems to be left unfused. In their
downstream u-boot they fetch it from eth_mac1 [1][2], by setting alias
of eqos to ethernet0, the driver then fetches the mac address based on
the alias number.
Set eqos to read from eth_mac1 instead of eth_mac2. Also set fec to
point at eth_mac2 as it may be fused later even though it is disabled
by default.
With this changed barebox is now capable of loading the correct address.
Link: 3805432784/drivers/net/dwc_eth_qos.c (L1167) [1]
Link: 3805432784/arch/arm/dts/imx8mp-karo.dtsi (L12) [2]
Fixes: bac63d7c5f ("arm64: dts: freescale: add Ka-Ro Electronics tx8p-ml81 COM")
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The compatibles should include the SoM compatible, this board is based
on the Ka-Ro TX8P-ML81 SoM, so add it to allow using shared code in the
bootloader which uses upstream Linux devicetrees as a base.
Also add the hardware revision to the board compatible to handle
revision specific quirks in the bootloader/userspace.
This is a breaking change, but it is early enough that it can be
corrected without causing any issues.
Fixes: 03f07be54c ("arm64: dts: freescale: Add the GOcontroll Moduline Display baseboard")
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
RTC interrupt level should be set to "LOW". This was revealed by the
introduction of commit:
f181987ef4 ("rtc: m41t80: use IRQ flags obtained from fwnode")
which changed the way IRQ type is obtained.
Fixes: 56c27310c1 ("ARM: dts: imx: Add Advantech BA-16 Qseven module")
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
