The existing comment was talking about reading in the write part
and vice versa. While we are here make it more clear why restricting
the syscalls to MIO capable devices is okay.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The value returned by read_tod_clock() will overflow on September 17th 2042.
To avoid that system time jumps back select CLOCKSOURCE_VALIDATE_LAST_CYCLE
which enables a sanity check in order to prevent negative "delta" values.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This is a s390 port of commit 548acf1923 ("x86/mm: Expand the
exception table logic to allow new handling options"), which is needed
for implementing BPF_PROBE_MEM on s390.
The new handler field is made 64-bit in order to allow pointing from
dynamically allocated entries to handlers in kernel text. Unlike on x86,
NULL is used instead of ex_handler_default. This is because exception
tables are used by boot/text_dma.S, and it would be a pain to preserve
ex_handler_default.
The new infrastructure is ignored in early_pgm_check_handler, since
there is no pt_regs.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Replace three implementations with one using using __stringify_in_c
macro conveniently "borrowed" from powerpc and microblaze.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Get rid of FORCE_MAX_ZONEORDER which limited allocations to order 8 (= 1MB)
and use the default, which allows for order 10 (= 4MB) allocations.
Given that s390 allows less than the default this caused some memory
allocation problems more or less unique to s390 from time to time.
Note: this was originally introduced with commit 684de39bd7 ("[S390]
Fix IPL from NSS.") in order to support Named Saved Segments, which
could start/end at an arbitrary 1 megabyte boundary and also before
support for sparsemem vmemmmap was enabled.
Since NSS support is gone, but sparsemem vmemmap support is available
this limitation can go away.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Trimming to MAX_ORDER was originally done in order to avoid to set
HOLES_IN_ZONE, which in turn would enable a quite expensive
pfn_valid() check. pfn_valid() however only checks if a struct page
exists for a given pfn.
With sparsemen vmemmap there are always struct pages, since memmaps
are allocated for whole sections. Therefore remove the HOLES_IN_ZONE
comment and the trimming.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
For non-thinint devices in LPAR, qdio polls an idle Input Queue for a
little while to catch more work. But platform support for thinints has
been around practically _forever_ by now, so this micro-optimization is
seeing 0 actual use. Remove it to reduce the overall complexity of the
hot path.
In the meantime we also grew support for driver-level polling
(eg. NAPI in qeth), so it's quite questionable how useful this would
actually be on current kernels.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The comment is inaccurate, qdio_inbound_q_moved() and/or its callers no
longer get confused by a count of 128 completed SBALs.
Scanning all 128 SBALs at once can improve IRQ reduction (as we now
place the ACK at the right spot), and reduce the amount of processing
needed to handle all completed SBALs.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Old code would only scan up to 127 SBALs at once. So the last statistics
bucket was set aside to count "discovered 127 SBALs with new work"
events.
But nowadays we allow to scan all 128 SBALs for Output Queues, and a
subsequent patch will introduce the same for Input Queues.
So fix up the accounting to use the last bucket only when all 128 SBALs
have been discovered with new work.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
With the removal of the critical section cleanup, we now enter the svc
interrupt handler with interrupts disabled.
Fixes: 0b0ed657fe ("s390: remove critical section cleanup from entry.S")
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Rework of the QCI crypto info and how it is used.
This is only a internal rework but does not affect the way
how the ap bus acts with ap card and queue devices and
domain handling.
Tested on z15, z14, z12 (QCI support) and z196 (no QCI support).
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Commit 50be634507 ("s390/mm: Convert bootmem to memblock") mentions
"The original bootmem allocator is getting replaced by memblock. To
cover the needs of the s390 kdump implementation the physical
memory list is used."
As we can now reference "physmem" managed in the memblock allocator after
init even without ARCH_KEEP_MEMBLOCK, and s390x does no longer need
other memblock metadata after boot (esp., the zcore memmap device that used
it got removed), we can stop setting ARCH_KEEP_MEMBLOCK.
With this change, we no longer create memblocks for standby/hotplugged
memory (added via add_memory()) and free up memblock metadata (except
physmem) after boot.
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Philipp Rudo <prudo@linux.ibm.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200701141830.18749-3-david@redhat.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
"physmem" in the memblock allocator is somewhat weird: it's not actually
used for allocation, it's simply information collected during boot, which
describes the unmodified physical memory map at boot time, without any
standby/hotplugged memory. It's only used on s390 and is currently the
only reason s390 keeps using CONFIG_ARCH_KEEP_MEMBLOCK.
Physmem isn't numa aware and current users don't specify any flags. Let's
hide it from the user, exposing only for_each_physmem(), and simplify. The
interface for physmem is now really minimalistic:
- memblock_physmem_add() to add ranges
- for_each_physmem() / __next_physmem_range() to walk physmem ranges
Don't place it into an __init section and don't discard it without
CONFIG_ARCH_KEEP_MEMBLOCK. As we're reusing __next_mem_range(), remove
the __meminit notifier to avoid section mismatch warnings once
CONFIG_ARCH_KEEP_MEMBLOCK is no longer used with
CONFIG_HAVE_MEMBLOCK_PHYS_MAP.
While fixing up the documentation, sneak in some related cleanups. We can
stop setting CONFIG_ARCH_KEEP_MEMBLOCK for s390 next.
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Message-Id: <20200701141830.18749-2-david@redhat.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This patch introduces the sysfs attributes serialnr and
mkvps for cex2c and cex3c cards. These sysfs attributes
are available for cex4c and higher since
commit 7c4e91c095 ("s390/zcrypt: new sysfs attributes serialnr and mkvps")'
and this patch now provides the same for the older cex2
and cex3 cards.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
There is a state machine held for each ap queue device.
The states and functions related to this where somethimes
noted with _sm_ somethimes without. This patch clarifies
and renames all the ap queue state machine related functions,
enums and defines to have a _sm_ in the name.
There is no functional change coming with this patch - it's
only beautifying code.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
The zcrpyt_unlocked_ioctl() function has become large. So split away
into new static functions the 4 ioctl ICARSAMODEXPO, ICARSACRT,
ZSECSENDCPRB and ZSENDEP11CPRB. This makes the code more readable and
is a preparation step for further improvements needed on these ioctls.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Some beautifications related to the internal only used
struct ap_message and related code. Instead of one int carrying
only the special flag now a u32 flags field is used.
At struct CPRBX the pointers to additional data are now marked
with __user. This caused some changes needed on code, where
these structs are also used within the zcrypt misc functions.
The ica_rsa_* structs now use the generic types __u8, __u32, ...
instead of char, unsigned int.
zcrypt_msg6 and zcrypt_msg50 use min_t() instead of min().
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
In an effort to enable -Wcast-function-type in the top-level Makefile to
support Control Flow Integrity builds, remove all the function callback
casts.
To do this modify the function prototypes accordingly.
Signed-off-by: Oscar Carter <oscar.carter@gmx.com>
Message-Id: <20200627125417.18887-1-oscar.carter@gmx.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
[heiko.carstens@de.ibm.com: coding style changes]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
I can't come up with a satisfying reason why we still need the memory
segment list. We used to represent in the list:
- boot memory
- standby memory added via add_memory()
- loaded dcss segments
When loading/unloading dcss segments, we already track them in a
separate list and check for overlaps
(arch/s390/mm/extmem.c:segment_overlaps_others()) when loading segments.
The overlap check was introduced for some segments in
commit b2300b9efe ("[S390] dcssblk: add >2G DCSSs support and stacked
contiguous DCSSs support.")
and was extended to cover all dcss segments in
commit ca57114609 ("s390/extmem: remove code for 31 bit addressing
mode").
Although I doubt that overlaps with boot memory and standby memory
are relevant, let's reshuffle the checks in load_segment() to request
the resource first. This will bail out in case we have overlaps with
other resources (esp. boot memory and standby memory). The order
is now different compared to segment_unload() and segment_unload(), but
that should not matter.
This smells like a leftover from ancient times, let's get rid of it. We
can now convert vmem_remove_mapping() into a void function - everybody
ignored the return value already.
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200625150029.45019-1-david@redhat.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Tested-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [DCSS]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Message-Id: <20200617212930.GA11728@embeddedor>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
There is no interface to userspace which exposes anything that would
require the struct __debug_entry definition. Therefore remove it from
uapi. This allows to change the definition, since it is only kernel
internally used.
The only exception is the crash utility, however that tool must handle
changes all the time anyway.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
There is not a single user of the debug raw view. Therefore remove it
before anybody uses it. If anybody would make use of the view it would
expose the struct __debug_entry definition to userspace and really
would make it uapi. This wouldn't be good, since the definition is
suboptimal and needs to be changed.
Right now the structure definition is only defined to be uapi, however
there is no user.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Remove unused /sys/kernel/debug/zcore/memmap device.
Since at least version 1.24.0 of s390-tools zfcpdump no longer
needs it and reads /proc/vmcore instead.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Instead of using the old 'jiffies + HZ {/,*} something' calculation
use msecs_to_jiffies() as that makes the code more readable.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Pull ARM OMAP fixes from Arnd Bergmann:
"The OMAP developers are particularly active at hunting down
regressions, so this is a separate branch with OMAP specific
fixes for v5.8:
As Tony explains
"The recent display subsystem (DSS) related platform data changes
caused display related regressions for suspend and resume. Looks
like I only tested suspend and resume before dropping the legacy
platform data, and forgot to test it after dropping it. Turns out
the main issue was that we no longer have platform code calling
pm_runtime_suspend for DSS like we did for the legacy platform data
case, and that fix is still being discussed on the dri-devel list
and will get merged separately. The DSS related testing exposed a
pile other other display related issues that also need fixing
though":
- Fix ti-sysc optional clock handling and reset status checks for
devices that reset automatically in idle like DSS
- Ignore ti-sysc clockactivity bit unless separately requested to
avoid unexpected performance issues
- Init ti-sysc framedonetv_irq to true and disable for am4
- Avoid duplicate DSS reset for legacy mode with dts data
- Remove LCD timings for am4 as they cause warnings now that we're
using generic panels
Other OMAP changes from Tony include:
- Fix omap_prm reset deassert as we still have drivers setting the
pm_runtime_irq_safe() flag
- Flush posted write for ti-sysc enable and disable
- Fix droid4 spi related errors with spi flags
- Fix am335x USB range and a typo for softreset
- Fix dra7 timer nodes for clocks for IPU and DSP
- Drop duplicate mailboxes after mismerge for dra7
- Prevent pocketgeagle header line signal from accidentally setting
micro-SD write protection signal by removing the default mux
- Fix NFSroot flakeyness after resume for duover by switching the
smsc911x gpio interrupt to back to level sensitive
- Fix regression for omap4 clockevent source after recent system
timer changes
- Yet another ethernet regression fix for the "rgmii" vs "rgmii-rxid"
phy-mode
- One patch to convert am3/am4 DT files to use the regular sdhci-omap
driver instead of the old hsmmc driver, this was meant for the
merge window but got lost in the process"
* tag 'arm-omap-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (21 commits)
ARM: dts: am5729: beaglebone-ai: fix rgmii phy-mode
ARM: dts: Fix omap4 system timer source clocks
ARM: dts: Fix duovero smsc interrupt for suspend
ARM: dts: am335x-pocketbeagle: Fix mmc0 Write Protect
Revert "bus: ti-sysc: Increase max softreset wait"
ARM: dts: am437x-epos-evm: remove lcd timings
ARM: dts: am437x-gp-evm: remove lcd timings
ARM: dts: am437x-sk-evm: remove lcd timings
ARM: dts: dra7-evm-common: Fix duplicate mailbox nodes
ARM: dts: dra7: Fix timer nodes properly for timer_sys_ck clocks
ARM: dts: Fix am33xx.dtsi ti,sysc-mask wrong softreset flag
ARM: dts: Fix am33xx.dtsi USB ranges length
bus: ti-sysc: Increase max softreset wait
ARM: OMAP2+: Fix legacy mode dss_reset
bus: ti-sysc: Fix uninitialized framedonetv_irq
bus: ti-sysc: Ignore clockactivity unless specified as a quirk
bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit
ARM: dts: omap4-droid4: Fix spi configuration and increase rate
bus: ti-sysc: Flush posted write on enable and disable
soc: ti: omap-prm: use atomic iopoll instead of sleeping one
...
Pull ARM SoC fixes from Arnd Bergmann:
"Here are a couple of bug fixes, mostly for devicetree files
NXP i.MX:
- Use correct voltage on some i.MX8M board device trees to avoid
hardware damage
- Code fixes for a compiler warning and incorrect reference counting,
both harmless.
- Fix the i.MX8M SoC driver to correctly identify imx8mp
- Fix watchdog configuration in imx6ul-kontron device tree.
Broadcom:
- A small regression fix for the Raspberry-Pi firmware driver
- A Kconfig change to use the correct timer driver on Northstar
- A DT fix for the Luxul XWC-2000 machine
- Two more DT fixes for NSP SoCs
STmicroelectronics STI
- Revert one broken patch for L2 cache configuration
ARM Versatile Express:
- Fix a regression by reverting a broken DT cleanup
TEE drivers:
- MAINTAINERS: change tee mailing list"
* tag 'arm-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
Revert "ARM: sti: Implement dummy L2 cache's write_sec"
soc: imx8m: fix build warning
ARM: imx6: add missing put_device() call in imx6q_suspend_init()
ARM: imx5: add missing put_device() call in imx_suspend_alloc_ocram()
soc: imx8m: Correct i.MX8MP UID fuse offset
ARM: dts: imx6ul-kontron: Change WDOG_ANY signal from push-pull to open-drain
ARM: dts: imx6ul-kontron: Move watchdog from Kontron i.MX6UL/ULL board to SoM
arm64: dts: imx8mm-beacon: Fix voltages on LDO1 and LDO2
arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2 voltage range
arm64: dts: imx8mm-evk: correct ldo1/ldo2 voltage range
ARM: dts: NSP: Correct FA2 mailbox node
ARM: bcm2835: Fix integer overflow in rpi_firmware_print_firmware_revision()
MAINTAINERS: change tee mailing list
ARM: dts: NSP: Disable PL330 by default, add dma-coherent property
ARM: bcm: Select ARM_TIMER_SP804 for ARCH_BCM_NSP
ARM: dts: BCM5301X: Add missing memory "device_type" for Luxul XWC-2000
arm: dts: vexpress: Move mcc node back into motherboard node
Pull timer fix from Ingo Molnar:
"A single DocBook fix"
* tag 'timers-urgent-2020-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Fix kerneldoc system_device_crosststamp & al
Pull perf fix from Ingo Molnar:
"A single Kbuild dependency fix"
* tag 'perf-urgent-2020-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/rapl: Fix RAPL config variable bug
Pull EFI fixes from Ingo Molnar:
- Fix build regression on v4.8 and older
- Robustness fix for TPM log parsing code
- kobject refcount fix for the ESRT parsing code
- Two efivarfs fixes to make it behave more like an ordinary file
system
- Style fixup for zero length arrays
- Fix a regression in path separator handling in the initrd loader
- Fix a missing prototype warning
- Add some kerneldoc headers for newly introduced stub routines
- Allow support for SSDT overrides via EFI variables to be disabled
- Report CPU mode and MMU state upon entry for 32-bit ARM
- Use the correct stack pointer alignment when entering from mixed mode
* tag 'efi-urgent-2020-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/libstub: arm: Print CPU boot mode and MMU state at boot
efi/libstub: arm: Omit arch specific config table matching array on arm64
efi/x86: Setup stack correctly for efi_pe_entry
efi: Make it possible to disable efivar_ssdt entirely
efi/libstub: Descriptions for stub helper functions
efi/libstub: Fix path separator regression
efi/libstub: Fix missing-prototype warning for skip_spaces()
efi: Replace zero-length array and use struct_size() helper
efivarfs: Don't return -EINTR when rate-limiting reads
efivarfs: Update inode modification time for successful writes
efi/esrt: Fix reference count leak in esre_create_sysfs_entry.
efi/tpm: Verify event log header before parsing
efi/x86: Fix build with gcc 4
Pull scheduler fixes from Borislav Petkov:
"The most anticipated fix in this pull request is probably the horrible
build fix for the RANDSTRUCT fail that didn't make -rc2. Also included
is the cleanup that removes those BUILD_BUG_ON()s and replaces it with
ugly unions.
Also included is the try_to_wake_up() race fix that was first
triggered by Paul's RCU-torture runs, but was independently hit by
Dave Chinner's fstest runs as well"
* tag 'sched_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/cfs: change initial value of runnable_avg
smp, irq_work: Continue smp_call_function*() and irq_work*() integration
sched/core: s/WF_ON_RQ/WQ_ON_CPU/
sched/core: Fix ttwu() race
sched/core: Fix PI boosting between RT and DEADLINE tasks
sched/deadline: Initialize ->dl_boosted
sched/core: Check cpus_mask, not cpus_ptr in __set_cpus_allowed_ptr(), to fix mask corruption
sched/core: Fix CONFIG_GCC_PLUGIN_RANDSTRUCT build fail
Pull x86 fixes from Borislav Petkov:
- AMD Memory bandwidth counter width fix, by Babu Moger.
- Use the proper length type in the 32-bit truncate() syscall variant,
by Jiri Slaby.
- Reinit IA32_FEAT_CTL during wakeup to fix the case where after
resume, VMXON would #GP due to VMX not being properly enabled, by
Sean Christopherson.
- Fix a static checker warning in the resctrl code, by Dan Carpenter.
- Add a CR4 pinning mask for bits which cannot change after boot, by
Kees Cook.
- Align the start of the loop of __clear_user() to 16 bytes, to improve
performance on AMD zen1 and zen2 microarchitectures, by Matt Fleming.
* tag 'x86_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm/64: Align start of __clear_user() loop to 16-bytes
x86/cpu: Use pinning mask for CR4 bits needing to be 0
x86/resctrl: Fix a NULL vs IS_ERR() static checker warning in rdt_cdp_peer_get()
x86/cpu: Reinitialize IA32_FEAT_CTL MSR on BSP during wakeup
syscalls: Fix offset type of ksys_ftruncate()
x86/resctrl: Fix memory bandwidth counter width for AMD
Pull RCU-vs-KCSAN fixes from Borislav Petkov:
"A single commit that uses "arch_" atomic operations to avoid the
instrumentation that comes with the non-"arch_" versions.
In preparation for that commit, it also has another commit that makes
these "arch_" atomic operations available to generic code.
Without these commits, KCSAN uses can see pointless errors"
* tag 'rcu_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rcu: Fixup noinstr warnings
locking/atomics: Provide the arch_atomic_ interface to generic code
Pull objtool fixes from Borislav Petkov:
"Three fixes from Peter Zijlstra suppressing KCOV instrumentation in
noinstr sections.
Peter Zijlstra says:
"Address KCOV vs noinstr. There is no function attribute to
selectively suppress KCOV instrumentation, instead teach objtool
to NOP out the calls in noinstr functions"
This cures a bunch of KCOV crashes (as used by syzcaller)"
* tag 'objtool_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix noinstr vs KCOV
objtool: Provide elf_write_{insn,reloc}()
objtool: Clean up elf_write() condition
Pull x86 entry fixes from Borislav Petkov:
"This is the x86/entry urgent pile which has accumulated since the
merge window.
It is not the smallest but considering the almost complete entry core
rewrite, the amount of fixes to follow is somewhat higher than usual,
which is to be expected.
Peter Zijlstra says:
'These patches address a number of instrumentation issues that were
found after the x86/entry overhaul. When combined with rcu/urgent
and objtool/urgent, these patches make UBSAN/KASAN/KCSAN happy
again.
Part of making this all work is bumping the minimum GCC version for
KASAN builds to gcc-8.3, the reason for this is that the
__no_sanitize_address function attribute is broken in GCC releases
before that.
No known GCC version has a working __no_sanitize_undefined, however
because the only noinstr violation that results from this happens
when an UB is found, we treat it like WARN. That is, we allow it to
violate the noinstr rules in order to get the warning out'"
* tag 'x86_entry_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Fix #UD vs WARN more
x86/entry: Increase entry_stack size to a full page
x86/entry: Fixup bad_iret vs noinstr
objtool: Don't consider vmlinux a C-file
kasan: Fix required compiler version
compiler_attributes.h: Support no_sanitize_undefined check with GCC 4
x86/entry, bug: Comment the instrumentation_begin() usage for WARN()
x86/entry, ubsan, objtool: Whitelist __ubsan_handle_*()
x86/entry, cpumask: Provide non-instrumented variant of cpu_is_offline()
compiler_types.h: Add __no_sanitize_{address,undefined} to noinstr
kasan: Bump required compiler version
x86, kcsan: Add __no_kcsan to noinstr
kcsan: Remove __no_kcsan_or_inline
x86, kcsan: Remove __no_kcsan_or_inline usage
Some performance regression on reaim benchmark have been raised with
commit 070f5e860e ("sched/fair: Take into account runnable_avg to classify group")
The problem comes from the init value of runnable_avg which is initialized
with max value. This can be a problem if the newly forked task is finally
a short task because the group of CPUs is wrongly set to overloaded and
tasks are pulled less agressively.
Set initial value of runnable_avg equals to util_avg to reflect that there
is no waiting time so far.
Fixes: 070f5e860e ("sched/fair: Take into account runnable_avg to classify group")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200624154422.29166-1-vincent.guittot@linaro.org
