Previous changes separated the uses of pmu_event and pmu_metric,
however, both structures contained all the variables of event and
metric. This change removes the event variables from metric and the
metric variables from event.
Note, this change removes the setting of evsel's metric_name/expr as
these fields are no longer part of struct pmu_event. The metric
remains but is no longer implicitly requested when the event is. This
impacts a few Intel uncore events, however, as the ScaleUnit is shared
by the event and the metric this utility is questionable. Also the
MetricNames look broken (contain spaces) in some cases and when trying
to use the functionality with '-e' the metrics fail but regular
metrics with '-M' work. For example, on SkylakeX '-M' works:
```
$ perf stat -M LLC_MISSES.PCIE_WRITE -a sleep 1
Performance counter stats for 'system wide':
0 UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 # 57896.0 Bytes LLC_MISSES.PCIE_WRITE (49.84%)
7,174 UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 (49.85%)
0 UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3 (50.16%)
63 UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 (50.15%)
1.004576381 seconds time elapsed
```
whilst the event '-e' version is broken even with --group/-g (fwiw, we should also remove -g [1]):
```
$ perf stat -g -e LLC_MISSES.PCIE_WRITE -g -a sleep 1
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Performance counter stats for 'system wide':
27,316 Bytes LLC_MISSES.PCIE_WRITE
1.004505469 seconds time elapsed
```
The code also carries warnings where the user is supposed to select
events for metrics [2] but given the lack of use of such a feature,
let's clean the code and just remove.
[1] https://lore.kernel.org/lkml/20220707195610.303254-1-irogers@google.com/
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/perf/util/stat-shadow.c?id=01b8957b738f42f96a130079bc951b3cc78c5b8a#n425
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230126233645.200509-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This release adds following change:
- Minor fixes for coverity static analysis
- Don't read cpufreq on offline CPUs
- SST turbo-freq enable on auto mode when user disables SMT from
kernel command line
- Fix uncore frequency display
- Set uncore frequency max/min limits on perf level change
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When perf level is changed, uncore limits can change. Set the uncore
limits via Linux uncore sysfs, when user changes perf level with
-o option.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Need memory frequency quirk as Sapphire Rapids in Emerald Rapids.
So add Emerald Rapids CPU model check in is_spr_platform().
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: Subject, changelog and code edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Uncore P1 is not uncore minmum frequency. This is uncore base frequency.
Correct display from uncore-frequency-min(MHz)
to uncore-frequency-base(Mhz).
To get uncore min frequency use mailbox command
CONFIG_TDP_GET_RATIO_INFO. Use this mailbox to get uncore frequency
limits when present.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When SMT is disabled from kernel command line, sibling CPUs still
appears in the sysfs as offline CPUs. This is a problem when turbo-freq
is enabled in auto mode. They are still assigned to CLOS value
of 3 as they are still in the present CPU list. But they are not in the
sibling list of a CPU. When the CPU is a high priority CPU, because of
sibling it will be still set to CLOS to 3 as CLOS is assigned at core
level not at CPU level.
So, avoid setting CLOS 3 to offline CPU.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Due to some recent kernel changes, reading cpufreq attributes like
scaling_max_freq on offline CPUs returns error. So avoid reading
cpufreq attributes on offline CPUs.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
strlen() and strtok() takes null-termimated strings as input.
Make sure these strings are null-terminated before using them.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
struct isst_id *id is a pointer, comparing it with less than zero is wrong.
The check is there to make sure the id->pkg and id->die is set to -1, when
it is illegal or unavailable. Here comparing with MAX_PACKAGE_COUNT and
MAX_DIE_PER_PACKAGE is sufficient.
Hence remove the wrong check.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: Subject and changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Right now there is no way to provide additional cflags/ldflags when
building tools/vm binaries. And using eg. make CFLAGS=<options> will
override the CFLAGS being set in the Makefile, making the build fail since
it requires the include of the ../lib dir (for libapi).
This change then allows you to specify:
CFLAGS=<options> LDFLAGS=<options> make V=1 -C tools/vm
And the options will be correctly appended as can be seen from the
make output.
Link: https://lkml.kernel.org/r/20230116224921.4106324-1-herton@redhat.com
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Justin Forbes <jforbes@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Scott Weaver <scweaver@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
__GFP_ATOMIC serves little purpose. Its main effect is to set
ALLOC_HARDER which adds a few little boosts to increase the chance of an
allocation succeeding, one of which is to lower the water-mark at which it
will succeed.
It is *always* paired with __GFP_HIGH which sets ALLOC_HIGH which also
adjusts this watermark. It is probable that other users of __GFP_HIGH
should benefit from the other little bonuses that __GFP_ATOMIC gets.
__GFP_ATOMIC also gives a warning if used with __GFP_DIRECT_RECLAIM.
There is little point to this. We already get a might_sleep() warning if
__GFP_DIRECT_RECLAIM is set.
__GFP_ATOMIC allows the "watermark_boost" to be side-stepped. It is
probable that testing ALLOC_HARDER is a better fit here.
__GFP_ATOMIC is used by tegra-smmu.c to check if the allocation might
sleep. This should test __GFP_DIRECT_RECLAIM instead.
This patch:
- removes __GFP_ATOMIC
- allows __GFP_HIGH allocations to ignore watermark boosting as well
as GFP_ATOMIC requests.
- makes other adjustments as suggested by the above.
The net result is not change to GFP_ATOMIC allocations. Other
allocations that use __GFP_HIGH will benefit from a few different extra
privileges. This affects:
xen, dm, md, ntfs3
the vermillion frame buffer
hibernation
ksm
swap
all of which likely produce more benefit than cost if these selected
allocation are more likely to succeed quickly.
[mgorman: Minor adjustments to rework on top of a series]
Link: https://lkml.kernel.org/r/163712397076.13692.4727608274002939094@noble.neil.brown.name
Link: https://lkml.kernel.org/r/20230113111217.14134-7-mgorman@techsingularity.net
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON selftests for sysfs (sysfs.sh) tests if some writes to DAMON sysfs
interface files fails as expected. It makes the test results noisy with
the failure error message because it tests a number of such failures.
Redirect the expected failure error messages to /dev/null to make the
results clean.
Link: https://lkml.kernel.org/r/20230110190400.119388-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jonathan writes:
1st set of IIO new device support, features and cleanups for the 6.3 cycle
The usual mixed bag. So far this has been a quiet cycle for IIO.
New device support
* adi,ad8686
- Add support for the AD5337 DAC - ID and 8 bit channel support.
* maxim,max5522
- New driver for this 2 channel DAC.
* nxp,imx93-adc
- New driver for this SoC ADC which is a fresh IP that will probably
turn up in additional SoCs going forwards.
* st,magn
- Add support for magnetometer part of LSM303C which is very similar
to standalone LIS3MDL already supported.
* ti,ads7924
- New driver for this 4 channel, 12-bit I2C ADC.
* ti,lmp92064
- New driver for this 12 bit SPI ADC.
* ti,tmag5273
- New driver for this 3D Hall-Effect Sensor.
Features
* core
- Add a standard structure for the value pairs in IIO_VAL_INT_PLUS_MICRO
available attributes and similar.
* cirrus,ep93xx
- Add DT binding docs and convert driver to DT based probing.
- Enable testing building with CONFIG_COMPILE_TEST.
* st,stm32-dfsdm
- Enable ID register support for discovery of hardware capabilities on
some devices.
Cleanups and minor fixes
* core
- Drop the custom iio_sysfs_match_string_with_gaps().
The special ability of this function to skip gaps in an array
was never used by any upstream driver.
- Sort headers whilst touching this file.
* tools
- Fix memory leak in iio_utils.c
* various
- leftover i2c probe_new() conversions.
- scnprintf() -> sysfs_emit() cleanups.
- hand rolled devm enables -> devm_regulator[_bulk]_get_enable()
- typo fixes
- dt-binding cleanup (whitespace, excess quotes and similar)
* adi,ad7746
- Set variable without pointless conditional.
* fsl,mma9551
- Squash false positives about use of uninitialized variable where
garbage undergoes an endian conversion before being ignored.
* measspec,ms5611
- Switch to fully devm_ managed probe() and so drop explicit remove()
* qcom,spmi-adc
- Use dev_err_probe() to suppress deferred print.
* qcom,spmi-adc5
- Define a missing channel used for battery identification.
* qcom,spmi-iadc
- Document a compatible seen in wild.
* semtech,sx9360
- Fix units on semtech,resolution dt-binding.
* sensiron,scd30
- dev_err_probe() usage to simplify error paths a little.
* st,lsm6dsx
- Add missing mount matrix for the gyro IIO device.
* taos,tsl2563
- Respect firmware configured interrupt polarity if present.
- Use i2c_smbus_write_word_data() in a few cases not previously covered.
- Factor out duplicated interrupt configuration.
- Switch to GENMASK() / BIT() from hand coded equivalents.
- Tidy up unused definitions.
- Use dev_err_probe() as appropriate.
- Drop platform_data as no in kernel users and there are better ways to
do equivalent if any are added.
- Add local struct device variable to tidy up code.
- Avoid dance via i2c_client to get the drvdata.
- Tidy up headers ordering and Makefile ordering.
* ti,adc128s052
- Use new spi_get_device_match_data().
- Drop ACPI_PTR() protection.
- Sort headers whilst here.
- Use asm instead of incorrect include of asm-generic/unaligned.h
* vishay,vcn4000
- Interrupt support for vcnl4040 (lots of refactoring needed)
* xilinx,ams
- Use fwnode_device_is_compatible() instead of open coding it.
* tag 'iio-for-6.3a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (71 commits)
iio: adc: ad7291: Fix indentation error by adding extra spaces
iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_config_word()
iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_status_word()
dt-bindings: iio/proximity: semtech,sx9360: Fix 'semtech,resolution' type
iio: imu: fix spdx format
iio: adc: imx93: Fix spelling mistake "geting" -> "getting"
dt-bindings: iio: cleanup examples - indentation
dt-bindings: iio: use lowercase hex in examples
dt-bindings: iio: correct node names in examples
dt-bindings: iio: minor whitespace cleanups
dt-bindings: iio: drop unneeded quotes
dt-bindings: iio: adc: Add NXP IMX93 ADC
iio: adc: add imx93 adc support
dt-bindings: iio: adc: add Texas Instruments ADS7924
iio: adc: ti-ads7924: add Texas Instruments ADS7924 driver
iio: imu: st_lsm6dsx: add 'mount_matrix' sysfs entry to gyro channel.
iio: imu: st_lsm6dsx: fix naming of 'struct iio_info' in st_lsm6dsx_shub.c.
iio: light: vcnl4000: Add interrupt support for vcnl4040
iio: light: vcnl4000: Make irq handling more generic
iio: light: vcnl4000: Prepare for more generic setup
...
Introduce xdp_features tool in order to test XDP features supported by
the NIC and match them against advertised ones.
In order to test supported/advertised XDP features, xdp_features must
run on the Device Under Test (DUT) and on a Tester device.
xdp_features opens a control TCP channel between DUT and Tester devices
to send control commands from Tester to the DUT and a UDP data channel
where the Tester sends UDP 'echo' packets and the DUT is expected to
reply back with the same packet. DUT installs multiple XDP programs on the
NIC to test XDP capabilities and reports back to the Tester some XDP stats.
Currently xdp_features supports the following XDP features:
- XDP_DROP
- XDP_ABORTED
- XDP_PASS
- XDP_TX
- XDP_REDIRECT
- XDP_NDO_XMIT
Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/7c1af8e7e6ef0614cf32fa9e6bdaa2d8d605f859.1675245258.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a Netlink spec-compatible family for netdevs.
This is a very simple implementation without much
thought going into it.
It allows us to reap all the benefits of Netlink specs,
one can use the generic client to issue the commands:
$ ./cli.py --spec netdev.yaml --dump dev_get
[{'ifindex': 1, 'xdp-features': set()},
{'ifindex': 2, 'xdp-features': {'basic', 'ndo-xmit', 'redirect'}},
{'ifindex': 3, 'xdp-features': {'rx-sg'}}]
the generic python library does not have flags-by-name
support, yet, but we also don't have to carry strings
in the messages, as user space can get the names from
the spec.
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Co-developed-by: Marek Majtyka <alardam@gmail.com>
Signed-off-by: Marek Majtyka <alardam@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/327ad9c9868becbe1e601b580c962549c8cd81f2.1675245258.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
xdp_synproxy/xdp fails in CI with:
Error: bpf_tc_hook_create: File exists
The XDP version of the test should not be calling bpf_tc_hook_create();
the reason it's happening anyway is that if we don't specify --tc on the
command line, tc variable remains uninitialized.
Fixes: 784d5dc0ef ("selftests/bpf: Add selftests for raw syncookie helpers in TC mode")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Reported-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230202235335.3403781-1-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, can and netfilter.
Current release - regressions:
- phy: fix null-deref in phy_attach_direct
- mac802154: fix possible double free upon parsing error
Previous releases - regressions:
- bpf: preserve reg parent/live fields when copying range info,
prevent mis-verification of programs as safe
- ip6: fix GRE tunnels not generating IPv6 link local addresses
- phy: dp83822: fix null-deref on DP83825/DP83826 devices
- sctp: do not check hb_timer.expires when resetting hb_timer
- eth: mtk_sock: fix SGMII configuration after phylink conversion
Previous releases - always broken:
- eth: xdp: execute xdp_do_flush() before napi_complete_done()
- skb: do not mix page pool and page referenced frags in GRO
- bpf:
- fix a possible task gone issue with bpf_send_signal[_thread]()
- fix an off-by-one bug in bpf_mem_cache_idx() to select the right
cache
- add missing btf_put to register_btf_id_dtor_kfuncs
- sockmap: fon't let sock_map_{close,destroy,unhash} call itself
- gso: fix null-deref in skb_segment_list()
- mctp: purge receive queues on sk destruction
- fix UaF caused by accept on already connected socket in exotic
socket families
- tls: don't treat list head as an entry in tls_is_tx_ready()
- netfilter: br_netfilter: disable sabotage_in hook after first
suppression
- wwan: t7xx: fix runtime PM implementation
Misc:
- MAINTAINERS: spring cleanup of networking maintainers"
* tag 'net-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
mtk_sgmii: enable PCS polling to allow SFP work
net: mediatek: sgmii: fix duplex configuration
net: mediatek: sgmii: ensure the SGMII PHY is powered down on configuration
MAINTAINERS: update SCTP maintainers
MAINTAINERS: ipv6: retire Hideaki Yoshifuji
mailmap: add John Crispin's entry
MAINTAINERS: bonding: move Veaceslav Falico to CREDITS
net: openvswitch: fix flow memory leak in ovs_flow_cmd_new
net: ethernet: mtk_eth_soc: disable hardware DSA untagging for second MAC
virtio-net: Keep stop() to follow mirror sequence of open()
selftests: net: udpgso_bench_tx: Cater for pending datagrams zerocopy benchmarking
selftests: net: udpgso_bench: Fix racing bug between the rx/tx programs
selftests: net: udpgso_bench_rx/tx: Stop when wrong CLI args are provided
selftests: net: udpgso_bench_rx: Fix 'used uninitialized' compiler warning
can: mcp251xfd: mcp251xfd_ring_set_ringparam(): assign missing tx_obj_num_coalesce_irq
can: isotp: split tx timer into transmission and timeout
can: isotp: handle wait_event_interruptible() return values
can: raw: fix CAN FD frame transmissions over CAN XL devices
can: j1939: fix errant WARN_ON_ONCE in j1939_session_deactivate
hv_netvsc: Fix missed pagebuf entries in netvsc_dma_map/unmap()
...
Show the branch speculation info if provided by the branch recording
hardware feature. This can be useful for optimizing code further.
The speculation info is appended to the end of the list of fields so any
existing tools that use "/" as a delimiter for access fields via an index
remain unaffected. Also show "-" instead of "N/A" when speculation info
is unavailable because "/" is used as the field separator.
E.g.
$ perf record -j any,u,save_type ./test_branch
$ perf script --fields brstacksym
Before:
[...]
check_match+0x60/strcmp+0x0/P/-/-/0/CALL
do_lookup_x+0x3c5/check_match+0x0/P/-/-/0/CALL
[...]
After:
[...]
check_match+0x60/strcmp+0x0/P/-/-/0/CALL/NON_SPEC_CORRECT_PATH
do_lookup_x+0x3c5/check_match+0x0/P/-/-/0/CALL/NON_SPEC_CORRECT_PATH
[...]
The bitfield swapping scheme used duing sample parsing has changed
because of the addition of new branch flags, namely "spec", "new_type"
and "priv". Earlier, these were all part of the "reserved" field but
now, each of these fields get swapped separately. Change the expected
flag values accordingly for the test to pass.
E.g.
$ perf test -v 27
Before:
27: Sample parsing :
--- start ---
test child forked, pid 61979
parsing failed for sample_type 0x800
test child finished with -1
---- end ----
Sample parsing: FAILED!
After:
27: Sample parsing :
--- start ---
test child forked, pid 63293
test child finished with 0
---- end ----
Sample parsing: Ok
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: x86@kernel.org
Link: https://lore.kernel.org/r/56e272583552526e999ba0b536ac009ae3613966.1675333809.git.sandipan.das@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current display code for perf stat iterates given cpus and build the
aggr map to collect the event data for the aggregation mode.
But uncore events have their own cpu maps and it won't guarantee that
it'd match to the aggr map. For example, per-package uncore events
would generate a single value for each socket. When user asks per-core
aggregation mode, the output would contain 0 values for other cores.
Thus it needs to check the uncore PMU's cpumask and if it matches to the
current aggregation id.
Before:
$ sudo ./perf stat -a --per-core -e power/energy-pkg/ sleep 1
Performance counter stats for 'system wide':
S0-D0-C0 1 3.73 Joules power/energy-pkg/
S0-D0-C1 0 <not counted> Joules power/energy-pkg/
S0-D0-C2 0 <not counted> Joules power/energy-pkg/
S0-D0-C3 0 <not counted> Joules power/energy-pkg/
1.001404046 seconds time elapsed
Some events weren't counted. Try disabling the NMI watchdog:
echo 0 > /proc/sys/kernel/nmi_watchdog
perf stat ...
echo 1 > /proc/sys/kernel/nmi_watchdog
The core 1, 2 and 3 should not be printed because the event is handled
in a cpu in the core 0 only. With this change, the output becomes like
below.
After:
$ sudo ./perf stat -a --per-core -e power/energy-pkg/ sleep 1
Performance counter stats for 'system wide':
S0-D0-C0 1 2.09 Joules power/energy-pkg/
Fixes: b897613510 ("perf stat: Update event skip condition for system-wide per-thread mode and merged uncore and hybrid events")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Ian Rogers <irogers@google.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230125192431.2929677-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The -S/--callstack-filter is to limit display entries having the given
string in the callstack (not only in the caller in the output).
The following example shows lock contention results if the callstack
has 'net' substring somewhere. Note that the caller '__dev_queue_xmit'
does not match to it, but it has 'inet6_csk_xmit' in the callstack.
This applies even if you don't use -v option to show the full callstack.
$ sudo ./perf lock con -abv -S net sleep 1
...
contended total wait max wait avg wait type caller
5 70.20 us 16.13 us 14.04 us spinlock __dev_queue_xmit+0xb6d
0xffffffffa5dd1c60 _raw_spin_lock+0x30
0xffffffffa5b8f6ed __dev_queue_xmit+0xb6d
0xffffffffa5cd8267 ip6_finish_output2+0x2c7
0xffffffffa5cdac14 ip6_finish_output+0x1d4
0xffffffffa5cdb477 ip6_xmit+0x457
0xffffffffa5d1fd17 inet6_csk_xmit+0xd7
0xffffffffa5c5f4aa __tcp_transmit_skb+0x54a
0xffffffffa5c6467d tcp_keepalive_timer+0x2fd
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230126000936.3017683-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
