During early development a dependedncy was added on having FA64
available so we could use the full FPSIMD register set in the signal
handler which got copied over into the SSVE+ZA registers test case.
Subsequently the ABI was finialised so the handler is run with streaming
mode disabled meaning this is redundant but the dependency was never
removed, do so now.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230202-arm64-kselftest-sve-za-fa64-v1-1-5c5f3dabe441@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When copying the EXTRA context our calculation of the amount of data we
need to copy is incorrect, we only calculate the amount of data needed
within uc_mcontext.__reserved, not taking account of the fixed portion
of the context. Add in the offset of the reserved data so that we copy
everything we should.
This will only cause test failures in cases where the last context in the
EXTRA context is smaller than the missing data since we don't currently
validate any of the register data and all the buffers we copy into are
statically allocated so default to zero meaning that if we walk beyond the
end of what we copied we'll encounter what looks like a context with magic
and length both 0 which is a valid terminator record.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230201-arm64-kselftest-full-extra-v1-1-93741f32dd29@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We have two IS1 filters of the OCELOT_VCAP_KEY_ANY key type (the one with
"action vlan pop" and the one with "action vlan modify") and one of the
OCELOT_VCAP_KEY_IPV4 key type (the one with "action skbedit priority").
But we have no IS1 filter with the OCELOT_VCAP_KEY_ETYPE key type, and
there was an uncaught breakage there.
To increase test coverage, convert one of the OCELOT_VCAP_KEY_ANY
filters to OCELOT_VCAP_KEY_ETYPE, by making the filter also match on the
MAC SA of the traffic sent by mausezahn, $h1_mac.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230205192409.1796428-2-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This reverts commit 115d9d77bb.
The pages being freed by memblock_free_late() have already been
initialized, but if they are in the deferred init range,
__free_one_page() might access nearby uninitialized pages when trying to
coalesce buddies. This can, for example, trigger this BUG:
BUG: unable to handle page fault for address: ffffe964c02580c8
RIP: 0010:__list_del_entry_valid+0x3f/0x70
<TASK>
__free_one_page+0x139/0x410
__free_pages_ok+0x21d/0x450
memblock_free_late+0x8c/0xb9
efi_free_boot_services+0x16b/0x25c
efi_enter_virtual_mode+0x403/0x446
start_kernel+0x678/0x714
secondary_startup_64_no_verify+0xd2/0xdb
</TASK>
A proper fix will be more involved so revert this change for the time
being.
Fixes: 115d9d77bb ("mm: Always release pages to the buddy allocator in memblock_free_late().")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Link: https://lore.kernel.org/r/20230207082151.1303-1-dev@aaront.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
In a previous commit, Ubuntu kernel code version is correctly set
by retrieving the information from /proc/version_signature.
commit<5b3d72987701d51bf31823b39db49d10970f5c2d>
(libbpf: Improve LINUX_VERSION_CODE detection)
The /proc/version_signature file doesn't present in at least the
older versions of Debian distributions (eg, Debian 9, 10). The Debian
kernel has a similar issue where the release information from uname()
syscall doesn't give the kernel code version that matches what the
kernel actually expects. Below is an example content from Debian 10.
release: 4.19.0-23-amd64
version: #1 SMP Debian 4.19.269-1 (2022-12-20) x86_64
Debian reports incorrect kernel version in utsname::release returned
by uname() syscall, which in older kernels (Debian 9, 10) leads to
kprobe BPF programs failing to load due to the version check mismatch.
Fortunately, the correct kernel code version presents in the
utsname::version returned by uname() syscall in Debian kernels. This
change adds another get kernel version function to handle Debian in
addition to the previously added get kernel version function to handle
Ubuntu. Some minor refactoring work is also done to make the code more
readable.
Signed-off-by: Hao Xiang <hao.xiang@bytedance.com>
Signed-off-by: Ho-Ren (Jack) Chuang <horenchuang@bytedance.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230203234842.2933903-1-hao.xiang@bytedance.com
The page_fault_test KVM selftest requires userfaultfd but the config
fragment for the KVM selftests does not enable it, meaning that those tests
are skipped in CI systems that rely on appropriate settings in the config
fragments except on S/390 which happens to have it in defconfig. Enable
the option in the config fragment so that the tests get run.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20230202-kvm-selftest-userfaultfd-v1-1-8186ac5a33a5@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Perf BPF filter test fails in environment where "kernel-debuginfo"
is not installed.
Test failure logs:
<<>>
42: BPF filter :
42.1: Basic BPF filtering : Ok
42.2: BPF pinning : Ok
42.3: BPF prologue generation : FAILED!
<<>>
Enabling verbose option provided debug logs, which says debuginfo
needs to be installed. Snippet of verbose logs:
<<>>
42.3: BPF prologue generation :
--- start ---
test child forked, pid 28218
<<>>
Rebuild with CONFIG_DEBUG_INFO=y, or install an appropriate debuginfo
package.
bpf_probe: failed to convert perf probe events
Failed to add events selected by BPF
test child finished with -1
---- end ----
BPF filter subtest 3: FAILED!
<<>>
Here the subtest "BPF prologue generation" failed and logs shows
debuginfo is needed. After installing kernel-debuginfo package, testcase
passes.
The "BPF prologue generation" subtest failed because, the do_test()
returns TEST_FAIL without checking the error type returned by
parse_events_load_bpf_obj().
parse_events_load_bpf_obj() can also return error of type -ENODATA
incase kernel-debuginfo package is not installed. Fix this by adding
check for -ENODATA error.
Test result after the patch changes:
Test failure logs:
<<>>
42: BPF filter :
42.1: Basic BPF filtering : Ok
42.2: BPF pinning : Ok
42.3: BPF prologue generation : Skip (clang/debuginfo isn't installed or environment missing BPF support)
<<>>
Fixes: ba1fae431e ("perf test: Add 'perf test BPF'")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/linux-perf-users/Y7bIk77mdE4j8Jyi@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The "bpf" tests fails in environment with missing libtraceevent support
as below:
# ./perf test 36
36: BPF filter :
36.1: Basic BPF filtering : FAILED!
36.2: BPF pinning : FAILED!
36.3: BPF prologue generation : FAILED!
The environment has clang but missing the libtraceevent devel. Hence
perf is compiled without libtraceevent support.
Detailed logs:
./perf test -v "Basic BPF filtering"
Failed to add BPF event syscalls:sys_enter_epoll_pwait
bpf: tracepoint call back failed, stop iterate
Failed to add events selected by BPF
The bpf tests tris to add probe event which fails at
"parse_events_add_tracepoint" function due to missing libtraceevent. Add
check for "HAVE_LIBTRACEEVENT" in the "tests/bpf.c" before proceeding
with the test.
With the change,
# ./perf test 36
36: BPF filter :
36.1: Basic BPF filtering : Skip (not compiled in or missing libtraceevent support)
36.2: BPF pinning : Skip (not compiled in or missing libtraceevent support)
36.3: BPF prologue generation : Skip (not compiled in or missing libtraceevent support)
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230131135001.54578-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a suite covering mcast_n_groups and mcast_max_groups bridge features.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The testsuite that checks for mcast_max_groups functionality will need to
wipe the added groups as well. Add helpers to build an IGMP or MLD packets
announcing that host is leaving a given group.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The testsuite that checks for mcast_max_groups functionality will need
to generate IGMP and MLD packets with configurable number of (S,G)
addresses. To that end, further extend igmpv3_is_in_get() and
mldv2_is_in_get() to allow a list of IP addresses instead of one
address.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to generate IGMPv3 and MLDv2 packets on the fly, the
functions that generate these packets need to be able to generate
packets for different groups and different sources. Generating MLDv2
packets further needs the source address of the packet for purposes of
checksum calculation. Add the necessary parameters, and generate the
payload accordingly by dispatching to helpers added in the previous
patches.
Adjust the sole client, bridge_mdb.sh, as well.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to generate IGMPv3 and MLDv2 packets on the fly, we will need
helpers to calculate the packet checksum.
The approach presented in this patch revolves around payload templates
for mausezahn. These are mausezahn-like payload strings (01:23:45:...)
with possibly one 2-byte sequence replaced with the word PAYLOAD. The
main function is payload_template_calc_checksum(), which calculates
RFC 1071 checksum of the message. There are further helpers to then
convert the checksum to the payload format, and to expand it.
For IPv6, MLDv2 message checksum is computed using a pseudoheader that
differs from the header used in the payload itself. The fact that the
two messages are different means that the checksum needs to be
returned as a separate quantity, instead of being expanded in-place in
the payload itself. Furthermore, the pseudoheader includes a length of
the message. Much like the checksum, this needs to be expanded in
mausezahn format. And likewise for number of addresses for (S,G)
entries. Thus we have several places where a computed quantity needs
to be presented in the payload format. Add a helper u16_to_bytes(),
which will be used in all these cases.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to generate IGMPv3 and MLDv2 packets on the fly, we will need
helpers to expand IPv4 and IPv6 addresses given as parameters in
mausezahn payload notation. Add helpers that do it.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
These functions will be helpful for other testsuites as well. Extract them
to a common place.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Yet another fix for non-CPU accesses to the memory backing the
VGICv3 subsystem
- A set of fixes for the setlftest checking for the S1PTW behaviour
after the fix that went in ealier in the cycle"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: aarch64: Test read-only PT memory regions
KVM: selftests: aarch64: Fix check of dirty log PT write
KVM: selftests: aarch64: Do not default to dirty PTE pages on all S1PTWs
KVM: selftests: aarch64: Relax userfaultfd read vs. write checks
KVM: arm64: Allow no running vcpu on saving vgic3 pending table
KVM: arm64: Allow no running vcpu on restoring vgic3 LPI pending status
KVM: arm64: Add helper vgic_write_guest_lock()
KVM/arm64 fixes for 6.2, take #3
- Yet another fix for non-CPU accesses to the memory backing
the VGICv3 subsystem
- A set of fixes for the setlftest checking for the S1PTW
behaviour after the fix that went in ealier in the cycle
With each test taking 4 seconds the runtime of pcm-test can add up. Since
generally each card in the system is physically independent and will be
unaffected by what's going on with other cards we can mitigate this by
testing each card in parallel. Make a list of cards as we enumerate the
system and then start a thread for each, then join the threads to ensure
they have all finished. The threads each run the same tests we currently
run for each PCM on the card before exiting.
The list of PCMs is kept global since it helps with global operations
like working out our planned number of tests and identifying missing PCMs
and it seemed neater to check for PCMs on the right card in the card
thread than make every PCM loop iterate over cards as well.
We don't run per-PCM tests in parallel since in embedded systems it can
be the case that resources are shared between the PCMs and operations on
one PCM on a card may constrain what can be done on another PCM on the same
card leading to potentially unstable results.
We use a mutex to ensure that the reporting of results is serialised and we
don't have issues with anything like the current test number, we could do
this in the kselftest framework but it seems like this might cause problems
for other tests that are doing lower level testing and building in
constrained environments such as nolibc so this seems more sensible.
Note that the ordering of the tests can't be guaranteed as things stand,
this does not seem like a major problem since the numbering of tests often
changes as test programs are changed so results parsers are expected to
rely on the test name rather than the test numbers. We also now prefix the
machine generated test name when printing the description of the test since
this is logged before streaming starts.
On my two card desktop system this reduces the overall runtime by a
third.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230203-alsa-pcm-test-card-thread-v1-1-59941640ebba@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Retire Latency field is added in the var3_w of the
PERF_SAMPLE_WEIGHT_STRUCT. The Retire Latency reports the number of
elapsed core clocks between the retirement of the instruction indicated
by the Instruction Pointer field of the PEBS record and the retirement
of the prior instruction. That's quite useful to display the information
with perf script.
Add a new field retire_lat for the Retire Latency information.
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20230104201349.1451191-9-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The Retire Latency field is added in the var3_w of the
PERF_SAMPLE_WEIGHT_STRUCT. The Retire Latency reports pipeline stall of
this instruction compared to the previous instruction in cycles. That's
quite useful to display the information with perf mem report.
The p_stage_cyc for Power is also from the var3_w. Union the p_stage_cyc
and retire_lat to share the code.
Implement X86 specific codes to display the X86 specific header.
Add a new sort key retire_lat for the Retire Latency.
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20230104201349.1451191-8-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It'd be useful to filter other than the current aggregation mode. For
example, users may want to see callstacks for specific locks only. Or
they may want tasks from a certain callstack.
The tracepoints already collected the information but it needs to check
the condition again when processing the event. And it needs to change
BPF to allow the key combinations.
The lock contentions on 'rcu_state' spinlock can be monitored:
$ sudo perf lock con -abv -L rcu_state sleep 1
...
contended total wait max wait avg wait type caller
4 151.39 us 62.57 us 37.85 us spinlock rcu_core+0xcb
0xffffffff81fd1666 _raw_spin_lock_irqsave+0x46
0xffffffff8172d76b rcu_core+0xcb
0xffffffff822000eb __softirqentry_text_start+0xeb
0xffffffff816a0ba9 __irq_exit_rcu+0xc9
0xffffffff81fc0112 sysvec_apic_timer_interrupt+0xa2
0xffffffff82000e46 asm_sysvec_apic_timer_interrupt+0x16
0xffffffff81d49f78 cpuidle_enter_state+0xd8
0xffffffff81d4a259 cpuidle_enter+0x29
1 30.21 us 30.21 us 30.21 us spinlock rcu_core+0xcb
0xffffffff81fd1666 _raw_spin_lock_irqsave+0x46
0xffffffff8172d76b rcu_core+0xcb
0xffffffff822000eb __softirqentry_text_start+0xeb
0xffffffff816a0ba9 __irq_exit_rcu+0xc9
0xffffffff81fc00c4 sysvec_apic_timer_interrupt+0x54
0xffffffff82000e46 asm_sysvec_apic_timer_interrupt+0x16
1 28.84 us 28.84 us 28.84 us spinlock rcu_accelerate_cbs_unlocked+0x40
0xffffffff81fd1c60 _raw_spin_lock+0x30
0xffffffff81728cf0 rcu_accelerate_cbs_unlocked+0x40
0xffffffff8172da82 rcu_core+0x3e2
0xffffffff822000eb __softirqentry_text_start+0xeb
0xffffffff816a0ba9 __irq_exit_rcu+0xc9
0xffffffff81fc0112 sysvec_apic_timer_interrupt+0xa2
0xffffffff82000e46 asm_sysvec_apic_timer_interrupt+0x16
0xffffffff81d49f78 cpuidle_enter_state+0xd8
...
To see tasks calling 'rcu_core' function:
$ sudo perf lock con -abt -S rcu_core sleep 1
contended total wait max wait avg wait pid comm
19 23.46 us 2.21 us 1.23 us 0 swapper
2 18.37 us 17.01 us 9.19 us 2061859 ThreadPoolForeg
3 5.76 us 1.97 us 1.92 us 3909 pipewire-pulse
1 2.26 us 2.26 us 2.26 us 1809271 MediaSu~isor #2
1 1.97 us 1.97 us 1.97 us 1514882 Chrome_ChildIOT
1 987 ns 987 ns 987 ns 3740 pipewire-pulse
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230203021324.143540-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull misc fixes from Andrew Morton:
"25 hotfixes, mainly for MM. 13 are cc:stable"
* tag 'mm-hotfixes-stable-2023-02-02-19-24-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (26 commits)
mm: memcg: fix NULL pointer in mem_cgroup_track_foreign_dirty_slowpath()
Kconfig.debug: fix the help description in SCHED_DEBUG
mm/swapfile: add cond_resched() in get_swap_pages()
mm: use stack_depot_early_init for kmemleak
Squashfs: fix handling and sanity checking of xattr_ids count
sh: define RUNTIME_DISCARD_EXIT
highmem: round down the address passed to kunmap_flush_on_unmap()
migrate: hugetlb: check for hugetlb shared PMD in node migration
mm: hugetlb: proc: check for hugetlb shared PMD in /proc/PID/smaps
mm/MADV_COLLAPSE: catch !none !huge !bad pmd lookups
Revert "mm: kmemleak: alloc gray object for reserved region with direct map"
freevxfs: Kconfig: fix spelling
maple_tree: should get pivots boundary by type
.mailmap: update e-mail address for Eugen Hristev
mm, mremap: fix mremap() expanding for vma's with vm_ops->close()
squashfs: harden sanity check in squashfs_read_xattr_id_table
ia64: fix build error due to switch case label appearing next to declaration
mm: multi-gen LRU: fix crash during cgroup migration
Revert "mm: add nodes= arg to memory.reclaim"
zsmalloc: fix a race with deferred_handles storing
...
