Since much of the MMIO register access done by the driver is to non-GT
registers, use of 'xe_gt' in these interfaces has been a long-standing
design flaw that's been hard to disentangle.
To avoid a flag day across the whole driver, munge the function names
and add temporary compatibility macros with the original function names
that can accept either the new xe_mmio or the old xe_gt structure as a
parameter. This will allow us to slowly convert parts of the driver
over to the new interface independently.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240910234719.3335472-54-matthew.d.roper@intel.com
Although we want to break the GT-centric nature of the MMIO code in the
general driver, the SRIOV handling still relies on data in a VF
substructure of the GT. So add a GT backpointer, but name it
sriov_vf_gt to make it clear that it's only for this one specific
special case and will not be set or usable for anything else.
v2:
- Store backpointer to the GT itself rather than the SRIOV-specific
substructure. (Michal)
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> # v1
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240910234719.3335472-53-matthew.d.roper@intel.com
By moving the GSI adjustment fields into 'struct xe_mmio' we can replace
the GT's MMIO substructure with another instance of xe_mmio. At the
moment this means MMIO operations wind up pulling information from two
different places (the tile's xe_mmio for the iomap and the GT's xe_mmio
for the adjustment), but we'll address that in future patches.
The type headers change a bit with this change, meaning that various
files should be including xe_device_types.h instead of (or in addition
to) xe_gt_types.h.
v2:
- Fix pre-existing kerneldoc typo while moving the fields (Lucas)
v3:
- Add missing '@' in kerneldoc. (Rodrigo)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240910234719.3335472-49-matthew.d.roper@intel.com
xe_mmio currently has a size parameter that is assigned but never used
anywhere. The current values assigned appear to be the size of the BAR
region assigned for the tile (both for registers and other purposes such
as the GGTT). Since the current field isn't being used for anything,
change the assignments to 4MB (the size of the register region on all
current platform) and rename the field to 'regs_size' to more clearly
describe what it represents. We can use this value in later patches to
help ensure no register accesses accidentally go past the end of the
desired register space (which might not be caught easily if they still
fall within the iomap).
v2:
- s/regs_length/regs_size/ (Lucas)
- Clarify kerneldoc description (Lucas)
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240910234719.3335472-48-matthew.d.roper@intel.com
Pull the 'mmio' substructure from xe_tile out into a dedicated type.
Future patches will expand this structure and then eventually move MMIO
read/write operations over to using this type.
v2:
- Fix kerneldoc of 'size' field. The rename/refocusing of this field
got moved to the next patch of the series. (Lucas)
- Correct commit message; it's the tile, not the device, mmio that's
been pulled out to a separate type. (Michal)
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240910234719.3335472-47-matthew.d.roper@intel.com
Thomas needs 5a498d4d06 ("drm/fbdev-dma: Only install deferred I/O
if necessary") in drm-misc, so start the backmerge cascade.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
Add a subtest that tries to allocate twice the amount of
buffer object memory available, write data to it and then read
all the data back verifying data integrity.
In order to be able to do this on systems that
have no or not enough swap-space available, allocate some memory
as purgeable, and introduce a function to purge such memory from
the TTM swap_notify path.
this test is intended to add test coverage to the current
bo swap path and upcoming shrinking path.
The test has previously been part of the xe bo shrinker series.
v2:
- Skip test if the execution time is expected to be too long.
- Minor code cleanups.
v3:
- Print random seed. (Matthew Auld)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240909085654.5064-1-thomas.hellstrom@linux.intel.com
Three cleanups
- Drop stale exynos file pattern from MAINTAINERS file
The old "exynos" directory is removed from MAINTAINERS as Samsung Exynos display bindings have been relocated. This resolves a warning from get_maintainers.pl about no files matching the outdated directory.
- Constify struct exynos_drm_ipp_funcs
By making struct exynos_drm_ipp_funcs constant, the patch enhances security by moving the structure to a read-only section of memory. This change results in a slight reduction in the data section size.
- Remove unnecessary code
The function exynos_atomic_commit is removed as it became redundant after a previous update. This cleans up the code and eliminates unused function declarations.
One fixup
- Fix wrong assignment in gsc_bind()
A double assignment in gsc_bind() was flagged by the cocci tool and corrected to fix an incorrect assignment, addressing a potential issue introduced in a prior commit.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240909004641.406858-1-inki.dae@samsung.com
Driver Changes:
- Expose fan speed via hwmon (Raag)
- Correction to Wa_14019159160 on ARL (John H)
- Whitelist COMMON_SLICE_CHICKEN1 for UMD access on DG2/MTL/ARL (Dnyaneshwar)
- Do not attempt to load the GSC multiple times to avoid hanging GSC HW (Daniele)
- Populate /sys/class/drm/cardX/engines/ even if one engine fails (Andi)
- Use kmemdup_array instead of kmemdup for multiple allocation (Yu)
- Remove extra unlikely() (Hongbo)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Ztrfr_Wuurfa-3Rv@jlahtine-mobl.ger.corp.intel.com
The 'runtime_status' field is an implementation detail of the
power management code, so a device driver should not normally
touch this:
drivers/gpu/drm/xe/xe_pm.c: In function 'xe_pm_suspending_or_resuming':
drivers/gpu/drm/xe/xe_pm.c:606:26: error: 'struct dev_pm_info' has no member named 'runtime_status'
606 | return dev->power.runtime_status == RPM_SUSPENDING ||
| ^
drivers/gpu/drm/xe/xe_pm.c:607:27: error: 'struct dev_pm_info' has no member named 'runtime_status'
607 | dev->power.runtime_status == RPM_RESUMING;
| ^
drivers/gpu/drm/xe/xe_pm.c:608:1: error: control reaches end of non-void function [-Werror=return-type]
Add an #ifdef check to avoid the build regression.
Fixes: cb85e39dc5 ("drm/xe: Suppress missing outer rpm protection warning")
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240909202521.1018439-1-arnd@kernel.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Pull timer fixes from Borislav Petkov:
- Remove percpu irq related code in the timer-of initialization routine
as it is broken but also unused (Daniel Lezcano)
- Fix return -ETIME when delta exceeds INT_MAX and the next event not
taking effect sometimes (Jacky Bai)
* tag 'timers_urgent_for_v6.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/imx-tpm: Fix next event not taking effect sometime
clocksource/drivers/imx-tpm: Fix return -ETIME when delta exceeds INT_MAX
clocksource/drivers/timer-of: Remove percpu irq related code
Pull perf fixes from Borislav Petkov:
- Fix perf's AUX buffer serialization
- Prevent uninitialized struct members in perf's uprobes handling
* tag 'perf_urgent_for_v6.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/aux: Fix AUX buffer serialization
uprobes: Use kzalloc to allocate xol area
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc/other driver fixes for 6.11-rc7. It's
nothing huge, just a bunch of small fixes of reported problems,
including:
- lots of tiny iio driver fixes
- nvmem driver fixex
- binder UAF bugfix
- uio driver crash fix
- other small fixes
All of these have been in linux-next this week with no reported
problems"
* tag 'char-misc-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
VMCI: Fix use-after-free when removing resource in vmci_resource_remove()
Drivers: hv: vmbus: Fix rescind handling in uio_hv_generic
uio_hv_generic: Fix kernel NULL pointer dereference in hv_uio_rescind
misc: keba: Fix sysfs group creation
dt-bindings: nvmem: Use soc-nvmem node name instead of nvmem
nvmem: Fix return type of devm_nvmem_device_get() in kerneldoc
nvmem: u-boot-env: error if NVMEM device is too small
misc: fastrpc: Fix double free of 'buf' in error path
binder: fix UAF caused by offsets overwrite
iio: imu: inv_mpu6050: fix interrupt status read for old buggy chips
iio: adc: ad7173: fix GPIO device info
iio: adc: ad7124: fix DT configuration parsing
iio: adc: ad_sigma_delta: fix irq_flags on irq request
iio: adc: ads1119: Fix IRQ flags
iio: fix scale application in iio_convert_raw_to_processed_unlocked
iio: adc: ad7124: fix config comparison
iio: adc: ad7124: fix chip ID mismatch
iio: adc: ad7173: Fix incorrect compatible string
iio: buffer-dmaengine: fix releasing dma channel on error
iio: adc: ad7606: remove frstdata check for serial mode
...
Pull USB fixes from Greg KH:
"Here are a handful of small USB fixes for 6.11-rc7. Included in here
are:
- dwc3 driver fixes for two reported problems
- two typec ucsi driver fixes
- cdns2 controller reset fix
All of these have been in linux-next this week with no reported
problems"
* tag 'usb-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Fix cable registration
usb: typec: ucsi: Fix the partner PD revision
usb: cdns2: Fix controller reset issue
usb: dwc3: core: update LC timer as per USB Spec V3.2
usb: dwc3: Avoid waking up gadget during startxfer
Pull clk fixes from Stephen Boyd:
"A pile of Qualcomm clk driver fixes with two main themes: the alpha
PLL driver and shared RCGs, and one fix for the Starfive JH7110 SoC.
- The Alpha PLL clk_ops had multiple problems around setting rates.
There are a handful of patches here that fix masks and skip
enabling the clk from set_rate() when the PLL is disabled. The PLLs
are crucial to operation of the system as almost all frequencies in
the system are derived from them.
- Parking shared RCGs at a slow always on clk at registration time
breaks stuff.
USB host mode can't handle such a slow frequency and the serial
console gets all garbled when the UART clk is handed over to the
kernel. There's a few patches that don't use the shared clk_ops for
the UART clks and another one to skip parking the USB clk at
registration time.
- The Starfive PLL driver used for the CPU was busted causing cpufreq
to fail because the clk didn't change to a safe parent during
set_rate().
The fix is to register a notifier and switch to a safe parent so
the PLL can change rate in a glitch free manner"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: gcc-sc8280xp: don't use parking clk_ops for QUPs
clk: starfive: jh7110-sys: Add notifier for PLL0 clock
clk: qcom: gcc-sm8650: Don't use shared clk_ops for QUPs
clk: qcom: gcc-sm8550: Don't park the USB RCG at registration time
clk: qcom: gcc-sm8550: Don't use parking clk_ops for QUPs
clk: qcom: gcc-x1e80100: Don't use parking clk_ops for QUPs
clk: qcom: ipq9574: Update the alpha PLL type for GPLLs
clk: qcom: gcc-x1e80100: Fix USB 0 and 1 PHY GDSC pwrsts flags
clk: qcom: clk-alpha-pll: Update set_rate for Zonda PLL
clk: qcom: clk-alpha-pll: Fix zonda set_rate failure when PLL is disabled
clk: qcom: clk-alpha-pll: Fix the trion pll postdiv set rate API
clk: qcom: clk-alpha-pll: Fix the pll post div mask
