Wedge the entire device, not just GT which may have triggered the wedge.
To implement this, cleanup the layering so xe_device_declare_wedged()
calls into the lower layers (GT) to ensure entire device is wedged.
While we are here, also signal any pending GT TLB invalidations upon
wedging device.
Lastly, short circuit reset wait if device is wedged.
v2:
- Short circuit reset wait if device is wedged (Local testing)
Fixes: 8ed9aaae39 ("drm/xe: Force wedged state and block GT reset upon any GPU hang")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240716063902.1390130-1-matthew.brost@intel.com
Wa_15015404425 asks us to perform four "dummy" writes to a
non-existent register offset before every real register read.
Although the specific offset of the writes doesn't directly
matter, the workaround suggests offset 0x130030 as a good target
so that these writes will be easy to recognize and filter out in
debugging traces.
V5(MattR):
- Avoid negating an equality comparison
V4(MattR):
- Use writel and remove xe_reg usage
V3(MattR):
- Define dummy reg local to function
- Avoid tracing dummy writes
- Update commit message
V2:
- Add WA to 8/16/32bit reads also - MattR
- Corrected dummy reg address - MattR
- Use for loop to avoid mental pause - JaniN
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240709155606.2998941-1-tejas.upadhyay@intel.com
Due to the current design of the BO and VRAM manager, any object
with XE_BO_FLAG_PINNED flag, which the PF driver uses during VF
LMEM provisionining, is created with the TTM_PL_FLAG_CONTIGUOUS
flag, which may cause VRAM fragmentation that prevents subsequent
allocations of larger objects, like fair VF LMEM provisioning.
To avoid such failures, round down fair VF LMEM provisioning size
to next power of two size, to compensate what xe_ttm_vram_mgr is
doing to achieve contiguous allocations.
Fixes: ac6598aed1 ("drm/xe/pf: Add support to configure SR-IOV VFs")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240711192320.1198-2-michal.wajdeczko@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The test case logic is implemented by the functions compiled as
part of the core Xe driver module and then exported to build and
register the test suite in the live test module.
But we don't need to export individual test case functions, we may
just export the entire test suite. And we don't need to register
this test suite in a separate file, it can be done in the main
file of the live test module.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708111210.1154-5-michal.wajdeczko@intel.com
The test case logic is implemented by the functions compiled as
part of the core Xe driver module and then exported to build and
register the test suite in the live test module.
But we don't need to export individual test case functions, we may
just export the entire test suite. And we don't need to register
this test suite in a separate file, it can be done in the main
file of the live test module.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708111210.1154-4-michal.wajdeczko@intel.com
The test case logic is implemented by the functions compiled as
part of the core Xe driver module and then exported to build and
register the test suite in the live test module.
But we don't need to export individual test case functions, we may
just export the entire test suite. And we don't need to register
this test suite in a separate file, it can be done in the main
file of the live test module.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708111210.1154-3-michal.wajdeczko@intel.com
The test case logic is implemented by the functions compiled as
part of the core Xe driver module and then exported to build and
register the test suite in the live test module.
But we don't need to export individual test case functions, we may
just export the entire test suite. And we don't need to register
this test suite in a separate file, it can be done in the main
file of the live test module.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708111210.1154-2-michal.wajdeczko@intel.com
Update PT layer so if a memory allocation for a PTE fails the error can
be propagated to the user without requiring the VM to be killed.
v5:
- change return value invalidation_fence_init to void (Matthew Auld)
v7:
- Invert i,j usage in two places (Matthew Auld)
- s/0/NULL (Matthew Auld)
- Don't ignore return value of xe_pt_new_shared (Matthew Auld)
- Don't check for NULL in xe_pt_entry (Matthew Auld)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240704041652.272920-7-matthew.brost@intel.com
This aligns with the uAPI of an array of binds or single bind that
results in multiple GPUVA ops to be considered a single atomic
operations.
The design is roughly:
- xe_vma_ops is a list of xe_vma_op (GPUVA op)
- each xe_vma_op resolves to 0-3 PT ops
- xe_vma_ops creates a single job
- if at any point during binding a failure occurs, xe_vma_ops contains
the information necessary unwind the PT and VMA (GPUVA) state
v2:
- add missing dma-resv slot reservation (CI, testing)
v4:
- Fix TLB invalidation (Paulo)
- Add missing xe_sched_job_last_fence_add/test_dep check (Inspection)
v5:
- Invert i, j usage (Matthew Auld)
- Add helper to test and add job dep (Matthew Auld)
- Return on anything but -ETIME for cpu bind (Matthew Auld)
- Return -ENOBUFS if suballoc of BB fails due to size (Matthew Auld)
- s/do/Do (Matthew Auld)
- Add missing comma (Matthew Auld)
- Do not assign return value to xe_range_fence_insert (Matthew Auld)
v6:
- s/0x1ff/MAX_PTE_PER_SDI (Matthew Auld, CI)
- Check to large of SA in Xe to avoid triggering WARN (Matthew Auld)
- Fix checkpatch issues
v7:
- Rebase
- Support more than 510 PTEs updates in a bind job (Paulo, mesa testing)
v8:
- Rebase
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240704041652.272920-5-matthew.brost@intel.com
In Xe, the perf layer allows capture of HW counter streams. These HW
counters are generally performance related but don't have to be necessarily
so. Also, the name "perf" is a carryover from i915 and is not preferred.
Here we propose the name "observation" for this common layer which allows
capture of different types of these counter streams.
v2: Rename observability layer to observation layer (Lucas/Rodrigo)
v3: Rename sysctl file to "observation_paranoid" (Jose)
Fixes: 52c2e956dc ("drm/xe/perf/uapi: "Perf" layer to support multiple perf counter stream types")
Fixes: fe8929bdf8 ("drm/xe/perf/uapi: Add perf_stream_paranoid sysctl")
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703164801.2561423-1-ashutosh.dixit@intel.com
Our debugfs allows to view and change VFs' provisioning configs.
If we attempt to experiment with VFs provisioning before enabling
them, this early config will affect fair provisioning calculations,
and will also be overwritten, which is undesirable behavior.
To improve this, check if the VFs configs are empty (unprovisioned)
before starting the fair provisioning procedure.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240701102738.934-2-michal.wajdeczko@intel.com
A couple copy/paste mistakes in the code that selects steering targets
for OADDRM and INSTANCE0 unintentionally clobbered the steering target
for DSS ranges in some cases.
The OADDRM/INSTANCE0 values were also not assigned as intended, although
that mistake wound up being harmless since the desired values for those
specific ranges were '0' which the kzalloc of the GT structure should
have already taken care of implicitly.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240626210536.1620176-2-matthew.d.roper@intel.com
It's not very obvious what the difference is between the 'size' and
'n_entries' fields of the MOCS structure. Rename both fields slightly
and add some comments explaining that one is the documentation-defined
table size, while the other is the number of entries that can be
programmed into the hardware (and the documented table size can
potentially be smaller than the number of hardware entries).
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627203741.2042752-4-matthew.d.roper@intel.com
Rely more heavily on assertions to describe the MOCS programming
invariants. CI checks these assertions and will ensure no violations
sneak in due to programmer error, so we can remove some of the redundant
WARN and silent return checks from non-debug builds.
Also tweak/augment some of the existing assertions: there's no reason
we'd ever want a platform not to have a MOCS 'ops' structure hooked up
so ensure info->ops is non-NULL. Likewise, we should never have a case
where the bspec-defined MOCS setting table is larger than the number of
MOCS registers exposed by the hardware, so add an extra assert on those
sizes as well.
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627203741.2042752-3-matthew.d.roper@intel.com
Per client engine utilization uses RING_TIMESTAMP to return
drm-total-cycles to the user. Current code uses XE_FW_GT to read this
register on the first available engine in a GT. When testing on DG2, it
is observed that this value is 0 when running test on some engines. To
resolve that, get the hwe domain specific FW for reading the engine
timestamp.
v2:
- update commit message
- use domain specific FW (Matt)
v3:
- Drop check for hwe in the helper (Matt, Michal)
v4:
- checkpatch fixes
v5: Rebase
Fixes: 188ced1e0f ("drm/xe/client: Print runtime to fdinfo")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627235105.2631135-1-umesh.nerlige.ramappa@intel.com
