The pkey handlers should only check, if the length of a key blob is big
enough for holding a key. Larger blobs should be tolerated.
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
CPU hotplug remove handling triggers the following function
call sequence:
CPUHP_AP_PERF_S390_SF_ONLINE --> s390_pmu_sf_offline_cpu()
...
CPUHP_AP_PERF_ONLINE --> perf_event_exit_cpu()
The s390 CPUMF sampling CPU hotplug handler invokes:
s390_pmu_sf_offline_cpu()
+--> cpusf_pmu_setup()
+--> setup_pmc_cpu()
+--> deallocate_buffers()
This function de-allocates all sampling data buffers (SDBs) allocated
for that CPU at event initialization. It also clears the
PMU_F_RESERVED bit. The CPU is gone and can not be sampled.
With the event still being active on the removed CPU, the CPU event
hotplug support in kernel performance subsystem triggers the
following function calls on the removed CPU:
perf_event_exit_cpu()
+--> perf_event_exit_cpu_context()
+--> __perf_event_exit_context()
+--> __perf_remove_from_context()
+--> event_sched_out()
+--> cpumsf_pmu_del()
+--> cpumsf_pmu_stop()
+--> hw_perf_event_update()
to stop and remove the event. During removal of the event, the
sampling device driver tries to read out the remaining samples from
the sample data buffers (SDBs). But they have already been freed
(and may have been re-assigned). This may lead to a use after free
situation in which case the samples are most likely invalid. In the
best case the memory has not been reassigned and still contains
valid data.
Remedy this situation and check if the CPU is still in reserved
state (bit PMU_F_RESERVED set). In this case the SDBs have not been
released an contain valid data. This is always the case when
the event is removed (and no CPU hotplug off occured).
If the PMU_F_RESERVED bit is not set, the SDB buffers are gone.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Fix format string in pr_err() and use the built-in
hexadecimal prefix %#x to display a number with a leading
hexadecimal indicator 0x.
No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use sf_buffer_available() consistently throughtout the code
to test for the existence of sampling buffer.
No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When the sampling buffer allocation fails in
__hw_perf_event_init(), jump to the end of the function
and return the result. This is consistent with the other
error handling and return conditions in this function.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-By: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Event delete removes an event from the event list, but common
code invokes the PMU's enable function later on. This happens
in event_sched_out() and leads to the following call sequence:
event_sched_out()
+--> cpumsf_pmu_del()
+--> cpumsf_pmu_enable()
In cpumsf_pmu_enable() return immediately when the event is not
active. Also remove an unneeded if clause. That if() statement
is only reached when flag PMU_F_IN_USE has been set in
cpumsf_pmu_add(). And this function also sets cpuhw->event
to a valid value.
Remove WARN_ON_ONCE() statement which never triggered.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This new pkey handler module supports the conversion of
Ultravisor retrievable secrets to protected keys.
The new module pkey-uv.ko is able to retrieve and verify
protected keys backed up by the Ultravisor layer which is
only available within protected execution environment.
The module is only automatically loaded if there is the
UV CPU feature flagged as available. Additionally on module
init there is a check for protected execution environment
and for UV supporting retrievable secrets. Also if the kernel
is not running as a protected execution guest, the module
unloads itself with errno ENODEV.
The pkey UV module currently supports these Ultravisor
secrets and is able to retrieve a protected key for these
UV secret types:
- UV_SECRET_AES_128
- UV_SECRET_AES_192
- UV_SECRET_AES_256
- UV_SECRET_AES_XTS_128
- UV_SECRET_AES_XTS_256
- UV_SECRET_HMAC_SHA_256
- UV_SECRET_HMAC_SHA_512
- UV_SECRET_ECDSA_P256
- UV_SECRET_ECDSA_P384
- UV_SECRET_ECDSA_P521
- UV_SECRET_ECDSA_ED25519
- UV_SECRET_ECDSA_ED448
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
There is a static array of pkey handler kernel module names
used in case the pkey_handler_request_modules() is invoked.
This static array is walked through and if the module is not
already loaded a module_request() is performed.
This patch reworks the code to instead of unconditionally
building up a list of module names into the array, only the
pkey handler modules available based on the current kernel
config options are inserted.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Fix all the complains from checkpatch for the pkey header file:
CHECK: No space is necessary after a cast
+ PKEY_TYPE_CCA_DATA = (__u32) 1,
CHECK: Please use a blank line after function/struct/union/enum declarations
+};
+#define PKEY_GENSECK _IOWR(PKEY_IOCTL_MAGIC, 0x01, struct pkey_genseck)
Suggested-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Rework the verification of protected keys by simple check
for the correct AES wrapping key verification pattern.
A protected key always carries the AES wrapping key
verification pattern within the blob. The old code really
used the protected key for an en/decrypt operation and by
doing so, verified the AES WK VP. But a much simpler and
more generic way is to extract the AES WK VP value from the
key and compare it with AES WK VP from a freshly created
dummy protected key. This also eliminates the limitation to
only be able to verify AES protected keys. With this change
any kind of known protected key can be verified.
Suggested-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The calculation of the length of a protected key based on
the protected key type is scattered over certain places within
the pkey code. By introducing a new inline function
pkey_keytype_to_size() this can be centralized and the calling
code can be reduced and simplified.
With this also comes a slight rework of the generation of
protected keys. Now the pkey_pckmo module is able to generate
all but ECC keys.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reflect the updated content in the query information UVC to the sysfs at
/sys/firmware/query
* new UV-query sysfs entry for the maximum number of retrievable
secrets the UV can store for one secure guest.
* new UV-query sysfs entry for the maximum number of association
secrets the UV can store for one secure guest.
* max_secrets contains the sum of max association and max retrievable
secrets.
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Link: https://lore.kernel.org/r/20241024062638.1465970-7-seiden@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Provide a kernel API to retrieve secrets from the UV secret store.
Add two new functions:
* `uv_get_secret_metadata` - get metadata for a given secret identifier
* `uv_retrieve_secret` - get the secret value for the secret index
With those two functions one can extract the secret for a given secret
id, if the secret is retrievable.
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Link: https://lore.kernel.org/r/20241024084107.2418186-1-seiden@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Utilize the new Query Ultravisor Keys UVC to give user space the
information which host-keys are installed on the system.
Create a new sysfs directory 'firmware/uv/keys' that contains the hash
of the host-key and the backup host-key of that system. Additionally,
the file 'all' contains the response from the UVC possibly containing
more key-hashes than currently known.
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Link: https://lore.kernel.org/r/20241023075529.2561384-1-seiden@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the netiucv code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the vfio_ap code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Tested-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the char/vmur code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the char/sclp_cpi_sys code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the char/sclp_ocf code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the char/vmlogrdr code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the char/tape_core code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the block/dcssblk code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the cio/scm code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the cio/css code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Tested-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the cio/ccwgroup code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Tested-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the cio/cmf code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the cio/device code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Tested-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the cio/chp code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Tested-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the zfcp code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Tested-by: Benjamin Block <bblock@linux.ibm.com>
Acked-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the s390/crypto code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred over
sprintf for presenting attributes to user space. Convert the left-over
uses in the s390/ipl code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred over
sprintf for presenting attributes to user space. Convert the left-over
uses in the s390/nospec-sysfs code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred over
sprintf for presenting attributes to user space. Convert the left-over
uses in the s390/perf_event code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred over
sprintf for presenting attributes to user space. Convert the left-over
uses in the s390/smp code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred over
sprintf for presenting attributes to user space. Convert the left-over
uses in the s390/time code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred over
sprintf for presenting attributes to user space. Convert the left-over
uses in the s390/topology code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
s390 sets "elfcorehdr_addr = ELFCORE_ADDR_MAX;" early during
setup_arch() to deactivate the "elfcorehdr= kernel" parameter,
resulting in is_kdump_kernel() returning "false".
During vmcore_init()->elfcorehdr_alloc(), if on a dump kernel and
allocation succeeded, elfcorehdr_addr will be set to a valid address
and is_kdump_kernel() will consequently return "true".
is_kdump_kernel() should return a consistent result during all boot
stages, and properly return "true" if in a kdump environment - just
like it is done on powerpc where "false" is indicated in fadump
environments, as added in commit b098f1c323 ("powerpc/fadump: make
is_kdump_kernel() return false when fadump is active").
Similarly provide a custom is_kdump_kernel() implementation that will only
return "true" in kdump environments, and will do so consistently during
boot.
Update the documentation of dump_available().
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Link: https://lore.kernel.org/r/20241023090651.1115507-1-david@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
kernel_page_present() was intentionally not implemented when adding
ARCH_HAS_SET_DIRECT_MAP support, since it was only used for suspend/resume
which is not supported anymore on s390.
A new bpf use case led to a compile error specific to s390. Even though
this specific use case went away implement kernel_page_present(), so that
the API is complete and potential future users won't run into this problem.
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Closes: https://lore.kernel.org/all/045de961-ac69-40cc-b141-ab70ec9377ec@iogearbox.net
Fixes: 0490d6d7ba ("s390/mm: enable ARCH_HAS_SET_DIRECT_MAP")
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Starting with commit 2297791c92 ("s390/cio: dont unregister
subchannel from child-drivers"), CIO does not unregister subchannels
when the attached device is invalid or unavailable. Instead, it
allows subchannels to exist without a connected device. However, if
the DNV value is 0, such as, when all the CHPIDs of a subchannel are
configured in standby state, the subchannel is unregistered, which
contradicts the current subchannel specification.
Update the logic so that subchannels are not unregistered based
on the DNV value. Also update the SCHIB information even if the
DNV bit is zero.
Suggested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Fixes: 2297791c92 ("s390/cio: dont unregister subchannel from child-drivers")
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Fixed some confusing typos that were currently identified with codespell,
the details are as follows:
-in the code comments:
drivers/s390/cio/chsc.c:379: EBCIDC ==> EBCDIC
drivers/s390/cio/cio.h:22: sublass ==> subclass
drivers/s390/cio/cmf.c:49: exended ==> extended
drivers/s390/cio/cmf.c:138: sinlge ==> single
drivers/s390/cio/cmf.c:1230: Reenable ==> Re-enable
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Link: https://lore.kernel.org/r/20240929080353.11690-1-shenlichuan@vivo.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
