While using "return" when calling a void returning function inside a
function that returns void doesn't cause a compiler warning, it looks
weird. Convert the bunch of if() statements to a switch() and remove
these return statements.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
xpcs_config_usxgmii() is only called from the xpcs_link_up() method, so
let's name it similarly to the SGMII and 1000BASEX functions.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
xpcs_link_up_sgmii() and xpcs_link_up_1000basex() are almost identical
with the exception of checking the speed and duplex for 1000BASE-X.
Combine the two functions.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We can now see that we have an open-coded version of
mii_bmcr_encode_fixed() when this is called with SPEED_1000:
val = BMCR_SPEED1000;
if (duplex == DUPLEX_FULL)
val |= BMCR_FULLDPLX;
Replace this with a call to mii_bmcr_encode_fixed().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Remove an unnecessary switch() statement in xpcs_link_up_1000basex().
The only value this switch statement is interested in is SPEED_1000,
all other values lead to an error. Replace this with a simple if()
statement.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As a general policy, we refer our generic register definitions over
vendor specific definitions. In XPCS, it appears that the register
layout follows a BMCR, BMSR and ADVERTISE register definition. We
already refer to this BMCR register using several different macros
which is confusing.
Convert the following register definitions to generic versions:
DW_VR_MII_MMD_CTRL => MII_BMCR
MDIO_CTRL1 => MII_BMCR
AN_CL37_EN => BMCR_ANENABLE
SGMII_SPEED_SS6 => BMCR_SPEED1000
SGMII_SPEED_SS13 => BMCR_SPEED100
MDIO_CTRL1_RESET => BMCR_RESET
DW_VR_MII_MMD_STS => MII_BMSR
DW_VR_MII_MMD_STS_LINK_STS => BMSR_LSTATUS
DW_FULL_DUPLEX => ADVERTISE_1000XFULL
iDW_HALF_DUPLEX => ADVERTISE_1000XHALF
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 02b34d03a2 ("netdevsim: add dummy macsec offload") pads u64
number to 8 characters using "%08llx" format specifier.
Changing format specifier to "%016llx" ensures that no matter the value
the representation of number in log is always the same length.
Before this patch, entry in log for value '1' would say:
removing SecY with SCI 00000001 at index 2
After this patch is applied, entry in log will say:
removing SecY with SCI 0000000000000001 at index 2
Signed-off-by: Ales Nezbeda <anezbeda@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20241017131933.136971-1-anezbeda@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support for reading SFP module info and digital diagnostic
monitoring data if supported by the module. The only Aquantia
controller without an integrated PHY is the AQC100 which belongs to
the B0 revision, that's why it's only implemented there.
The register information was extracted from a diagnostic tool made
publicly available by Dell, but all code was written from scratch by me.
This has been tested to work with a variety of both optical and direct
attach modules I had lying around and seems to work fine with all of
them, including the diagnostics if supported by an optical module.
All tests have been done with an AQC100 on an TL-NT521F card on firmware
version 3.1.121 (current at the time of this patch).
Signed-off-by: Lorenz Brun <lorenz@brun.one>
Reviewed-by: Simon Horman <horms@kernel.org>
Message-ID: <20241018171721.2577386-1-lorenz@brun.one>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Add error pointer check after calling otx2_mbox_get_rsp().
Fixes: ab58a416c9 ("octeontx2-pf: cn10k: Get max mtu supported from admin function")
Signed-off-by: Dipendra Khadka <kdipendra88@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Refactor the send_msg_fragmented() function by extracting the logic for
sending the message body into a new function called
send_fragmented_body().
Now, send_msg_fragmented() handles appending the release and header, and
then delegates the task of breaking up the body and sending the
fragments to send_fragmented_body().
This is the final flow now:
When send_ext_msg_udp() is called to send a message, it will:
- call send_msg_no_fragmentation() if no fragmentation is needed
or
- call send_msg_fragmented() if fragmentation is needed
* send_msg_fragmented() appends the header to the buffer, which is
be persisted until the function returns
* call send_fragmented_body() to iterate and populate the body of
the message. It will not touch the header, and it will only
replace the body, writing the msgbody and/or userdata.
Also add some comment to make the code easier to review.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Do not pass userdata to send_msg_fragmented, since we can get it later.
This will be more useful in the next patch, where send_msg_fragmented()
will be split even more, and userdata is only necessary in the last
function.
Suggested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Refactor the code by extracting the logic for appending the
release into the buffer into a separate function.
The goal is to reduce the size of send_msg_fragmented() and improve
code readability.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The current check to determine if the message body was fully sent is
difficult to follow. To improve clarity, introduce a variable that
explicitly tracks whether the message body (msgbody) has been completely
sent, indicating when it's time to begin sending userdata.
Additionally, add comments to make the code more understandable for
others who may work with it.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This new variable tracks the total length of the data to be sent,
encompassing both the message body (msgbody) and userdata, which is
collectively called body.
By explicitly defining body_len, the code becomes clearer and easier to
reason about, simplifying offset calculations and improving overall
readability of the function.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
With the introduction of the userdata concept, the term body has become
ambiguous and less intuitive.
To improve clarity, body is renamed to msg_body, making it clear that
the body is not the only content following the header.
In an upcoming patch, the term body_len will also be revised for further
clarity.
The current packet structure is as follows:
release, header, body, [msg_body + userdata]
Here, [msg_body + userdata] collectively forms what is currently
referred to as "body." This renaming helps to distinguish and better
understand each component of the packet.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Following the previous change, where the non-fragmented case was moved
to its own function, this update introduces a new function called
send_msg_fragmented to specifically manage scenarios where message
fragmentation is required.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The send_ext_msg_udp() function has become quite large, currently
spanning 102 lines. Its complexity, along with extensive pointer and
offset manipulation, makes it difficult to read and error-prone.
The function has evolved over time, and it’s now due for a refactor.
To improve readability and maintainability, isolate the case where no
message fragmentation occurs into a separate function, into a new
send_msg_no_fragmentation() function. This scenario covers about 95% of
the messages.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Variable msg_ready is useless, since it does not represent anything. Get
rid of it, using buf directly instead.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently reset state configuration of split header works fine for
non-tagged packets and we see no corruption in payload of any size
We need additional programming sequence with reset configuration to
handle VLAN tagged packets to avoid corruption in payload for packets
of size greater than 256 bytes.
Without this change ping application complains about corruption
in payload when the size of the VLAN packet exceeds 256 bytes.
With this change tagged and non-tagged packets of any size works fine
and there is no corruption seen.
Current configuration which has the issue for VLAN packet
----------------------------------------------------------
Split happens at the position at Layer 3 header
|MAC-DA|MAC-SA|Vlan Tag|Ether type|IP header|IP data|Rest of the payload|
2 bytes ^
|
With the fix we are making sure that the split happens now at
Layer 2 which is end of ethernet header and start of IP payload
Ip traffic split
-----------------
Bits which take care of this are SPLM and SPLOFST
SPLM = Split mode is set to Layer 2
SPLOFST = These bits indicate the value of offset from the beginning
of Length/Type field at which header split should take place when the
appropriate SPLM is selected. Reset value is 2bytes.
Un-tagged data (without VLAN)
|MAC-DA|MAC-SA|Ether type|IP header|IP data|Rest of the payload|
2bytes ^
|
Tagged data (with VLAN)
|MAC-DA|MAC-SA|VLAN Tag|Ether type|IP header|IP data|Rest of the payload|
2bytes ^
|
Non-IP traffic split such AV packet
------------------------------------
Bits which take care of this are
SAVE = Split AV Enable
SAVO = Split AV Offset, similar to SPLOFST but this is for AVTP
packets.
|Preamble|MAC-DA|MAC-SA|VLAN tag|Ether type|IEEE 1722 payload|CRC|
2bytes ^
|
Signed-off-by: Abhishek Chauhan <quic_abchauha@quicinc.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241016234313.3992214-1-quic_abchauha@quicinc.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As preparation for HW Steering support, rename modify header struct
member action to fs_dr_action, to distinguish from fs_hws_action which
will be added. Add a pointer where needed to keep code line shorter and
more readable.
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As preparation for HW Steering support, rename packet reformat struct
member action to fs_dr_action, to distinguish from fs_hws_action which
will be added. Add a pointer where needed to keep code line shorter and
more readable.
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, when VFs are created, two flow tables are added for the eswitch:
the "fdb" table, which contains rules for each VF and the "vepa_fdb" table.
In the default VEB mode, the vepa_fdb table is empty. When switching to
VEPA mode, flow steering rules are added to vepa_fdb. Even though the
vepa_fdb table is empty in VEB mode, its presence adds some cost to packet
processing. In some workloads, this leads to drops which are reported by
the rx_discards_phy ethtool counter.
In order to improve performance, only create vepa_fdb when in VEPA mode.
Tests were done on a ConnectX-6 Lx adapter forwarding 64B packets between
both ports using dpdk-testpmd. Numbers are Rx-pps for each port, as
reported by testpmd.
Without changes:
traffic to unknown mac
testpmd on PF
numvfs=0,0
35257998,35264499
numvfs=1,1
24590124,24590888
testpmd on VF with numvfs=1,1
20434338,20434887
traffic to VF mac
testpmd on VF with numvfs=1,1
30341014,30340749
With changes:
traffic to unknown mac
testpmd on PF
numvfs=0,0
35404361,35383378
numvfs=1,1
29801247,29790757
testpmd on VF with numvfs=1,1
24310435,24309084
traffic to VF mac
testpmd on VF with numvfs=1,1
34811436,34781706
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On sync reset flow, firmware may request a PF, which already
acknowledged the unload event, to move to drop mode. Drop mode means
that this PF will reduce polling frequency, as this PF is not going to
have another active part in the reset, but only reload back after the
reset.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Refactor QoS normalization and rate calculation functions to operate
on mlx5_esw_sched_node, allowing for generalized handling of both
vports and nodes.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Simplify the configuration of QoS scheduling elements by removing the
separate functions `esw_qos_node_config` and `esw_qos_vport_config`.
Instead, directly use the existing `esw_qos_sched_elem_config` function
for both nodes and vports.
This unification helps in generalizing operations on scheduling
elements nodes.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Remove the `enabled` flag from the `vport->qos` struct, as QoS now
relies solely on the `sched_node` pointer to determine whether QoS
features are in use.
Currently, the vport `qos` struct consists only of the `sched_node`,
introducing an unnecessary two-level reference. However, the qos struct
is retained as it will be extended in future patches to support new QoS
features.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Refactor the vport QoS structure by moving group membership and
scheduling details into the `mlx5_esw_sched_node` structure.
This change consolidates the vport into the rate hierarchy by unifying
the handling of different types of scheduling element nodes.
In addition, add a direct reference to the mlx5_vport within the
mlx5_esw_sched_node structure, to ensure that the vport is easily
accessible when a scheduling node is associated with a vport.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Modify the vport scheduling element creation function to get the parent
node directly, aligning it with the group creation function.
This ensures a consistent flow for scheduling elements creation, as the
parent nodes already contain the device and parent element index.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce the `mlx5_esw_sched_node` struct, consolidating all rate
hierarchy related details, including membership and scheduling
parameters.
Since the group concept aligns with the `mlx5_esw_sched_node`, replace
the `mlx5_esw_rate_group` struct with it and rename the "group"
terminology to "node" throughout the rate hierarchy.
All relevant code paths and structures have been updated to use the
"node" terminology accordingly, laying the groundwork for future
patches that will unify the handling of different types of members
within the rate hierarchy.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Rename the `group` field in the `mlx5_vport` structure to `parent` to
clarify the vport's role as a member of a parent group and distinguish
it from the concept of a general group.
Additionally, rename `group_entry` to `parent_entry` to reflect this
update.
This distinction will be important for handling more complex group
structures and scheduling elements.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Update the logic for adding rate groups to the E-Switch domain list,
ensuring only groups with the root Transmit Scheduling Arbiter as their
parent are included.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce a `parent` field in the `mlx5_esw_rate_group` structure to
support hierarchical group relationships.
The `parent` can reference another group or be set to `NULL`,
indicating the group is connected to the root TSAR.
This change enables the ability to manage groups in a hierarchical
structure for future enhancements.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce the `sched_node_type` enum to represent both the group and
its members as scheduling nodes in the rate hierarchy.
Add the `type` field to the rate group structure to specify the type of
the node membership in the rate hierarchy.
Generalize comments to reflect this flexibility within the rate group
structure.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce `esw_qos_create_group_sched_elem` to handle the creation of
group scheduling elements for E-Switch QoS, Transmit Scheduling
Arbiter (TSAR).
This reduces duplication and simplifies code for TSAR setup.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a Makefile and update Kconfig to build hibmcge driver.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implement the .get_drvinfo .get_link .get_link_ksettings to get
the basic information and working status of the driver.
Implement the .set_link_ksettings to modify the rate, duplex,
and auto-negotiation status.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implement rx_poll function to read the rx descriptor after
receiving the rx interrupt. Adjust the skb based on the
descriptor to complete the reception of the packet.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implement .ndo_start_xmit function to fill the information of the packet
to be transmitted into the tx descriptor, and then the hardware will
transmit the packet using the information in the tx descriptor.
In addition, we also implemented the tx_handler function to enable the
tx descriptor to be reused, and .ndo_tx_timeout function to print some
information when the hardware is busy.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implement the .ndo_open() .ndo_stop() .ndo_set_mac_address()
and .ndo_change_mtu functions().
And .ndo_validate_addr calls the eth_validate_addr function directly
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The driver supports four interrupts: TX interrupt, RX interrupt,
mdio interrupt, and error interrupt.
Actually, the driver does not use the mdio interrupt.
Therefore, the driver does not request the mdio interrupt.
The error interrupt distinguishes different error information
by using different masks. To distinguish different errors,
the statistics count is added for each error.
To ensure the consistency of the code process, masks are added for the
TX interrupt and RX interrupt.
This patch implements interrupt request, and provides a
unified entry for the interrupt handler function. However,
the specific interrupt handler function of each interrupt
is not implemented currently.
Because of pcim_enable_device(), the interrupt vector
is already device managed and does not need to be free actively.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implements the C22 read and write PHY registers interfaces.
Some hardware interfaces related to the PHY are also implemented
in this patch.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
