drm-misc-next for v6.7-rc1:
drm-misc-next-2023-10-19 + following:
UAPI Changes:
Cross-subsystem Changes:
- Convert fbdev drivers to use fbdev i/o mem helpers.
Core Changes:
- Use cross-references for macros in docs.
- Make drm_client_buffer_addb use addfb2.
- Add NV20 and NV30 YUV formats.
- Documentation updates for create_dumb ioctl.
- CI fixes.
- Allow variable number of run-queues in scheduler.
Driver Changes:
- Rename drm/ast constants.
- Make ili9882t its own driver.
- Assorted fixes in ivpu, vc4, bridge/synopsis, amdgpu.
- Add planar formats to rockchip.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3d92fae8-9b1b-4165-9ca8-5fda11ee146b@linux.intel.com
On gfx943 APU, EXT_COHERENT should give MTYPE_CC for local and
MTYPE_UC for nonlocal memory.
On NUMA systems, local memory gets the local mtype, set by an
override callback. If EXT_COHERENT is set, memory will be set as
MTYPE_UC by default, with local memory MTYPE_CC.
Add an option in the override function for this case, and
add a check to ensure it is not used on UNCACHED memory.
V2: Combined APU and NUMA code into one patch
V3: Fixed a potential nullptr in amdgpu_vm_bo_update
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
An assignment statement was reversed during a refactor which effectively
disabled S/G display outright. Since, we use
adev->mode_info.gpu_vm_support to indicate to the rest of the driver
that S/G display should be enabled and currently it is always set to
false. So, to fix this set adev->mode_info.gpu_vm_support's value to
that of init_data.flags.gpu_vm_support (and not vice versa).
Fixes: 098c13079c ("drm/amd/display: enable S/G display for for recent APUs by default")
Reported-by: Mark Broadworth <mark.broadworth@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdxcp unloads incompletely, and below error will be seen during load/unload,
sysfs: cannot create duplicate filename '/devices/platform/amdgpu_xcp.0'
devres_release_group will free xcp device at first, platform device will be
unregistered later in platform_device_unregister.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In SR-IOV environment, the value of pcie_table->num_of_link_levels will
be 0, and num_of_levels - 1 will cause array index out of bounds
Signed-off-by: Lin.Cao <lincao12@amd.com>
Acked-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
is_mode1_reset_supported may be called before smu init, when smu_context
is unitialized in driver load/unload test. Call smu_cmn_get_smc_version
explicitly in is_mode1_reset_supported.
v2: apply to aldebaran in case is_mode1_reset_supported will be
uncommented (Candice Li)
Fixes: 710d9caec7 ("drm/amd/pm: drop most smu_cmn_get_smc_version in smu")
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Candice Li <candice.li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use subrevision of IP version in discovery table to identify SOC
revision id for NBIO v7.9 SOCs. Only newer bootloaders update
subrevision field.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DC v3.2.256
Summary:
* Fixes null-deref regression after
"drm/amd/display: Update OPP counter from new interface"
* Fixes display flashing when VSR and HDR enabled on dcn32
* Fixes dcn3x intermittent hangs due to FPO
* Fixes MST Multi-Stream light up on dcn35
* Fixes green screen on DCN31x when DVI and HDMI monitors attached
* Adds DML2 improvements
* Adds idle power optimization improvements
* Accommodates panels with lower nit backlight
* Updates SDP VSC colorimetry from DP test automation request
* Reverts "drm/amd/display: allow edp updates for virtual signal"
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
LUT params are not cleared after setting blend TF, which can lead to
same params being used for the shaper, if the shaper func is bypassed.
[How]
Set lut_params to NULL after program_1dlut.
Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In cases where number of pipes available is less
than num_opp, there will opp instances that are
null
[How]
Add null check to skip over these opp instances
Fixes: 40de8403b9 ("drm/amd/display: Update OPP counter from new interface")
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Helper function calculates num_ways using 32-bit. But is
returned as 8-bit. If num_ways exceeds 8-bit, then it
reports back the incorrect num_ways and erroneously
uses MALL when it should not
[How]
Make returned value 32-bit and convert after it checks
against caps.cache_num_ways, which is under 8-bit
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The ftrace debug feature allows filtering functions based on a prefix,
which can be helpful in some complex debug scenarios. The driver can
benefit more from this feature if the function name follows some
patterns; for this reason, this commit adds the prefix amdgpu_dm_crtc_
to all the functions that do not have it in the amdgpu_dm_crtc.c file.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
