Add a .kunitconfig file, which provides a default, working config for
running the KCSAN tests. Note that it needs to run on an SMP machine, so
to run under kunit_tool, the --qemu_args option should be used (on a
supported architecture, like x86_64). For example:
./tools/testing/kunit/kunit.py run --arch=x86_64 --qemu_args='-smp 8'
--kunitconfig=kernel/kcsan
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
CONFIG_UML_PCI_OVER_VIRTIO=y is needed to enable CONFIG_PCI=y on UML.
However, this causes test failures when running the clk tests, i.e.
$ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/clk
A snippet of the particular error is:
> ok 1 - clk_gate_test_parent_rate
> ------------[ cut here ]------------
> WARNING: CPU: 0 PID: 45 at lib/logic_iomem.c:141 __raw_readl+0x9f/0xd0
This is triggered by this cast in the test:
143 ctx->fake_mem = (void __force __iomem *)&ctx->fake_reg;
this seems to work except when logic iomem is enabled, i.e.
CONFIG_INDIRECT_IOMEM=y.
As a short-term fix, explicitly disable CONFIG_UML_PCI_OVER_VIRTIO in
drivers/clk/.kunitconfig so we can enable it for everyone else by
default in kunit.py.
The long-term fix probably requires something more complicated, like
#ifdef CONFIG_INDIRECT_IOMEM
logic_iomem_add_region(...);
#endif
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reported-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The kunit_test_suite() macro is no-longer incompatible with module_add,
so its use can be reinstated.
Since this fixes parsing with builtins and kunit_tool, also enable the
test by default when KUNIT_ALL_TESTS is enabled.
The test can now be run via kunit_tool with:
./tools/testing/kunit/kunit.py run --arch=x86_64 \
--kconfig_add CONFIG_OF=y --kconfig_add CONFIG_OF_ADDRESS=y \
--kconfig_add CONFIG_MMC=y --kconfig_add CONFIG_MMC_SDHCI=y \
--kconfig_add CONFIG_MMC_SDHCI_PLTFM=y \
--kconfig_add CONFIG_MMC_SDHCI_OF_ASPEED=y \
'sdhci-of-aspeed'
(It may be worth adding a .kunitconfig at some point, as there are
enough dependencies to make that command scarily long.)
Acked-by: Daniel Latypov <dlatypov@google.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The kunit_test_suite() macro previously conflicted with module_init,
making it unsuitable for use in the nitro_enclaves test. Now that it's
fixed, we can use it instead of a custom call into internal KUnit
functions to run the test.
As a side-effect, this means that the test results are properly included
with other suites when built-in. To celebrate, enable the test by
default when KUNIT_ALL_TESTS is set (and NITRO_ENCLAVES enabled).
The nitro_enclave tests can now be run via kunit_tool with:
./tools/testing/kunit/kunit.py run --arch=x86_64 \
--kconfig_add CONFIG_PCI=y --kconfig_add CONFIG_SMP=y \
--kconfig_add CONFIG_HOTPLUG_CPU=y \
--kconfig_add CONFIG_VIRT_DRIVERS=y \
--kconfig_add CONFIG_NITRO_ENCLAVES=y \
'ne_misc_dev_test'
(This is a pretty long command, so it may be worth adding a .kunitconfig
file at some point, instead.)
Reviewed-by: Andra Paraschiv <andraprs@amazon.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The new implementation of kunit_test_suite() for modules no longer
conflicts with module_init, so can now be used by the thunderbolt tests.
Also update the Kconfig entry to enable the test when KUNIT_ALL_TESTS is
enabled.
This means that kunit_tool can now successfully run and parse the test
results with, for example:
./tools/testing/kunit/kunit.py run --arch=x86_64 \
--kconfig_add CONFIG_PCI=y --kconfig_add CONFIG_USB4=y \
'thunderbolt'
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Daniel Latypov <dlatypov@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
We currently store kunit suites in the .kunit_test_suites ELF section as
a `struct kunit_suite***` (modulo some `const`s).
For every test file, we store a struct kunit_suite** NULL-terminated array.
This adds quite a bit of complexity to the test filtering code in the
executor.
Instead, let's just make the .kunit_test_suites section contain a single
giant array of struct kunit_suite pointers, which can then be directly
manipulated. This array is not NULL-terminated, and so none of the test
filtering code needs to NULL-terminate anything.
Tested-by: Maíra Canal <maira.canal@usp.br>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Co-developed-by: David Gow <davidgow@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently, KUnit runs built-in tests and tests loaded from modules
differently. For built-in tests, the kunit_test_suite{,s}() macro adds a
list of suites in the .kunit_test_suites linker section. However, for
kernel modules, a module_init() function is used to run the test suites.
This causes problems if tests are included in a module which already
defines module_init/exit_module functions, as they'll conflict with the
kunit-provided ones.
This change removes the kunit-defined module inits, and instead parses
the kunit tests from their own section in the module. After module init,
we call __kunit_test_suites_init() on the contents of that section,
which prepares and runs the suite.
This essentially unifies the module- and non-module kunit init formats.
Tested-by: Maíra Canal <maira.canal@usp.br>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Make any kselftest test module (using the kselftest_module framework)
taint the kernel with TAINT_TEST on module load.
Also mark the module as a test module using MODULE_INFO(test, "Y") so
that other tools can tell this is a test module. We can't rely solely
on this, though, as these test modules are also often built-in.
Finally, update the kselftest documentation to mention that the kernel
should be tainted, and how to do so manually (as below).
Note that several selftests use kernel modules which are not based on
the kselftest_module framework, and so will not automatically taint the
kernel.
This can be done in two ways:
- Moving the module to the tools/testing directory. All modules under
this directory will taint the kernel.
- Adding the 'test' module property with:
MODULE_INFO(test, "Y")
Similarly, selftests which do not load modules into the kernel generally
should not taint the kernel (or possibly should only do so on failure),
as it's assumed that testing from user-space should be safe. Regardless,
they can write to /proc/sys/kernel/tainted if required.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Taint the kernel with TAINT_TEST whenever a test module loads, by adding
a new "TEST" module property, and setting it for all modules in the
tools/testing directory. This property can also be set manually, for
tests which live outside the tools/testing directory with:
MODULE_INFO(test, "Y");
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Aaron Tomlin <atomlin@redhat.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Without the quoting, the example will mess up invocations like
$ run_kunit "Something with spaces"
Note: this example isn't valid, but if ever a usecase arises where a
flag argument might have spaces in it, it'll break.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fix this kernel-doc warning:
Documentation/dev-tools/kunit/api/test:9: ./include/kunit/test.h:323: WARNING: Inline interpreted text or phrase reference start-string without end-string.
Functions should use func_name() on kernel-doc markups, as
documented at:
Documentation/doc-guide/kernel-doc.rst
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
There are several tests which depend on PCI, and hence need a bunch of
extra options to run under UML. This makes it awkward to give
configuration instructions (whether in documentation, or as part of a
.kunitconfig file), as two separate, incompatible sets of config options
are required for UML and "most other architectures".
For non-UML architectures, it's possible to add default kconfig options
via the qemu_config python files, but there's no equivalent for UML. Add
a new tools/testing/kunit/configs/arch_uml.config file containing extra
kconfig options to use on UML.
Tested-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
It's come up a few times that it would be useful to have --kunitconfig
be repeatable [1][2].
This could be done before with a bit of shell-fu, e.g.
$ find fs/ -name '.kunitconfig' -exec cat {} + | \
./tools/testing/kunit/kunit.py run --kunitconfig=/dev/stdin
or equivalently:
$ cat fs/ext4/.kunitconfig fs/fat/.kunitconfig | \
./tools/testing/kunit/kunit.py run --kunitconfig=/dev/stdin
But this can be fairly clunky to use in practice.
And having explicit support in kunit.py opens the door to having more
config fragments of interest, e.g. options for PCI on UML [1], UML
coverage [2], variants of tests [3].
There's another argument to be made that users can just use multiple
--kconfig_add's, but this gets very clunky very fast (e.g. [2]).
Note: there's a big caveat here that some kconfig options might be
incompatible. We try to give a clearish error message in the simple case
where the same option appears multiple times with conflicting values,
but more subtle ones (e.g. mutually exclusive options) will be
potentially very confusing for the user. I don't know we can do better.
Note 2: if you want to combine a --kunitconfig with the default, you
either have to do to specify the current build_dir
> --kunitconfig=.kunit --kunitconfig=additional.config
or
> --kunitconfig=tools/testing/kunit/configs/default.config --kunitconifg=additional.config
each of which have their downsides (former depends on --build_dir,
doesn't work if you don't have a .kunitconfig yet), etc.
Example with conflicting values:
> $ ./tools/testing/kunit/kunit.py config --kunitconfig=lib/kunit --kunitconfig=/dev/stdin <<EOF
> CONFIG_KUNIT_TEST=n
> CONFIG_KUNIT=m
> EOF
> ...
> kunit_kernel.ConfigError: Multiple values specified for 2 options in kunitconfig:
> CONFIG_KUNIT=y
> vs from /dev/stdin
> CONFIG_KUNIT=m
>
> CONFIG_KUNIT_TEST=y
> vs from /dev/stdin
> # CONFIG_KUNIT_TEST is not set
[1] https://lists.freedesktop.org/archives/dri-devel/2022-June/357616.html
[2] https://lore.kernel.org/linux-kselftest/CAFd5g45f3X3xF2vz2BkTHRqOC4uW6GZxtUUMaP5mwwbK8uNVtA@mail.gmail.com/
[3] https://lore.kernel.org/linux-kselftest/CANpmjNOdSy6DuO6CYZ4UxhGxqhjzx4tn0sJMbRqo2xRFv9kX6Q@mail.gmail.com/
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Now that kunit.py's --kunitconfig is repeatable, let's create a file to
hold the various options needed to enable coverage under UML.
This can be used like so:
$ ./tools/testing/kunit/kunit.py run \
--kunitconfig=tools/testing/kunit/configs/all_tests_uml.config \
--kunitconfig=tools/testing/kunit/configs/coverage_uml.config \
--make_options=CC=/usr/bin/gcc-6
which on my system is enough to get coverage working [1].
This is still a clunky command, but far better than before.
[1] at the time of this commit, I get:
Overall coverage rate:
lines......: 11.6% (34112 of 295033 lines)
functions..: 15.3% (3721 of 24368 functions)
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently, you cannot ovewrwrite what's in your kunitconfig via
--kconfig_add.
Nor can you override something in a qemu_config via either means.
This patch makes it so we have this level of priority
* --kconfig_add
* kunitconfig file (the default or the one from --kunitconfig)
* qemu_config
The rationale for this order is that the more "dynamic" sources of
kconfig options should take priority.
--kconfig_add is obviously the most dynamic.
And for kunitconfig, users probably tweak the file manually or specify
--kunitconfig more often than they delve into qemu_config python files.
And internally, we convert the kconfigs from a python list into a set or
dict fairly often. We should just use a dict internally.
We exposed the set transform in the past since we didn't define __eq__,
so also take the chance to shore up the kunit_kconfig.Kconfig interface.
Example
=======
Let's consider the unrealistic example where someone would want to
disable CONFIG_KUNIT.
I.e. they run
$ ./tools/testing/kunit/kunit.py config --kconfig_add=CONFIG_KUNIT=n
Before
------
We'd write the following
> # CONFIG_KUNIT is not set
> CONFIG_KUNIT_ALL_TESTS=y
> CONFIG_KUNIT_TEST=y
> CONFIG_KUNIT=y
> CONFIG_KUNIT_EXAMPLE_TEST=y
And we'd error out with
> ERROR:root:Not all Kconfig options selected in kunitconfig were in the generated .config.
> This is probably due to unsatisfied dependencies.
> Missing: # CONFIG_KUNIT is not set
After
-----
We'd write the following
> # CONFIG_KUNIT is not set
> CONFIG_KUNIT_TEST=y
> CONFIG_KUNIT_ALL_TESTS=y
> CONFIG_KUNIT_EXAMPLE_TEST=y
And we'd error out with
> ERROR:root:Not all Kconfig options selected in kunitconfig were in the generated .config.
> This is probably due to unsatisfied dependencies.
> Missing: CONFIG_KUNIT_EXAMPLE_TEST=y, CONFIG_KUNIT_TEST=y, CONFIG_KUNIT_ALL_TESTS=y
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Example usage:
$ ./tools/testing/kunit/kunit.py run --arch=x86_64 \
--kconfig_add=CONFIG_SMP=y --qemu_args='-smp 8'
Looking in the test.log, one can see
> smp: Bringing up secondary CPUs ...
> .... node #0, CPUs: #1#2#3#4#5#6#7
> smp: Brought up 1 node, 8 CPUs
This flag would allow people to make tweaks like this without having to
create custom qemu_config files.
For consistency with --kernel_args, we allow users to repeat this
argument, e.g. you can tack on a --qemu_args='-m 2048', or you could
just append it to the first string ('-smp 8 -m 2048').
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Drop get_source_tree_ops() and just call what used to be
get_source_tree_ops_from_qemu_config() in both cases.
Also rename the functions to have shorter names and add a "_" prefix to
note they're not meant to be used outside this function.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Context:
When using a non-UML arch, kunit.py will boot the test kernel with
options like these by default (this is x86_64):
> mem=1G console=tty kunit_shutdown=halt console=ttyS0 kunit_shutdown=reboot
The first three options are added unconditionally but are only intended
for UML.
1. 'mem=1G' is redundant with the '-m 1024' that we hard-code into the
qemu commandline.
2. We specify a 'console' for all tools/testing/kunit/qemu_configs/*.py
already, so 'console=tty' gets overwritten.
3. For QEMU, we need to use 'reboot', and for UML we need to use 'halt'.
If you switch them, kunit.py will hang until the --timeout expires.
This patch:
Having these duplicate options is a bit noisy.
Switch so we only add UML-specific options for UML.
I.e. we now get
UML: 'mem=1G console=tty kunit_shutdown=halt' (unchanged)
x86_64: 'console=ttyS0 kunit_shutdown=reboot'
Side effect: you can't overwrite these options on UML w/ --kernel_arg.
But you already couldn't for QEMU (console, kunit_shutdown), and why
would you want to?
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Context:
* kunit_kernel.py is importing kunit_parser.py just to use the
print_with_timestamp() function
* the parser is directly printing to stdout, which will become an issue
if we ever try to run multiple kernels in parallel
This patch introduces a kunit_printer.py file and migrates callers of
kunit_parser.print_with_timestamp() to call
kunit_printer.stdout.print_with_timestamp() instead.
Future changes:
If we want to support showing results for parallel runs, we could then
create new Printer's that don't directly write to stdout and refactor
the code to pass around these Printer objects.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Our main function currently has an optional `linux` argument which is
used to by our unit tests to inject a mock.
We currently have the same code copy-pasted several times to do
if not linux:
linux = MakeRealInstance(cli_args.foo, cli_args.bar, ...)
But in python, dependency injection isn't necessary or idiomatic when we
can just use mock.patch() to mock things out.
This change
1. adds a helper to create a LinuxSourceTree from the cli_args
2. drops the `linux` parameter in favor of mocking the __init__ func.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
kmemdup() is easier than kmalloc() + memcpy(), per lkp bot.
Also make the input `suite` as const since we're now always making
copies after commit a127b154a8 ("kunit: tool: allow filtering test
cases via glob").
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
With some of the stricter type checking in KUnit's EXPECT macros
removed, several casts in policy_unpack_test are no longer required.
Remove the unnecessary casts, making the conditions clearer.
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Acked-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Make KUnit trigger the new TAINT_TEST taint when any KUnit test is run.
Due to KUnit tests not being intended to run on production systems, and
potentially causing problems (or security issues like leaking kernel
addresses), the kernel's state should not be considered safe for
production use after KUnit tests are run.
This both marks KUnit modules as test modules using MODULE_INFO() and
manually taints the kernel when tests are run (which catches builtin
tests).
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Tested-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Most in-kernel tests (such as KUnit tests) are not supposed to run on
production systems: they may do deliberately illegal things to trigger
errors, and have security implications (for example, KUnit assertions
will often deliberately leak kernel addresses).
Add a new taint type, TAINT_TEST to signal that a test has been run.
This will be printed as 'N' (originally for kuNit, as every other
sensible letter was taken.)
This should discourage people from running these tests on production
systems, and to make it easier to tell if tests have been run
accidentally (by loading the wrong configuration, etc.)
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Pull file descriptor fix from Al Viro:
"Fix for breakage in #work.fd this window"
* tag 'pull-work.fd-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix the breakage in close_fd_get_file() calling conventions change
Pull mm hotfixes from Andrew Morton:
"Fixups for various recently-added and longer-term issues and a few
minor tweaks:
- fixes for material merged during this merge window
- cc:stable fixes for more longstanding issues
- minor mailmap and MAINTAINERS updates"
* tag 'mm-hotfixes-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/oom_kill.c: fix vm_oom_kill_table[] ifdeffery
x86/kexec: fix memory leak of elf header buffer
mm/memremap: fix missing call to untrack_pfn() in pagemap_range()
mm: page_isolation: use compound_nr() correctly in isolate_single_pageblock()
mm: hugetlb_vmemmap: fix CONFIG_HUGETLB_PAGE_FREE_VMEMMAP_DEFAULT_ON
MAINTAINERS: add maintainer information for z3fold
mailmap: update Josh Poimboeuf's email
Pull delay-accounting update from Andrew Morton:
"A single featurette for delay accounting.
Delayed a bit because, unusually, it had dependencies on both the
mm-stable and mm-nonmm-stable queues"
* tag 'mm-nonmm-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
delayacct: track delays from write-protect copy
The bluetooth code uses our bitmap infrastructure for the two bits (!)
of connection setup flags, and in the process causes odd problems when
it converts between a bitmap and just the regular values of said bits.
It's completely pointless to do things like bitmap_to_arr32() to convert
a bitmap into a u32. It shoudln't have been a bitmap in the first
place. The reason to use bitmaps is if you have arbitrary number of
bits you want to manage (not two!), or if you rely on the atomicity
guarantees of the bitmap setting and clearing.
The code could use an "atomic_t" and use "atomic_or/andnot()" to set and
clear the bit values, but considering that it then copies the bitmaps
around with "bitmap_to_arr32()" and friends, there clearly cannot be a
lot of atomicity requirements.
So just use a regular integer.
In the process, this avoids the warnings about erroneous use of
bitmap_from_u64() which were triggered on 32-bit architectures when
conversion from a u64 would access two words (and, surprise, surprise,
only one word is needed - and indeed overkill - for a 2-bit bitmap).
That was always problematic, but the compiler seems to notice it and
warn about the invalid pattern only after commit 0a97953fd2 ("lib: add
bitmap_{from,to}_arr64") changed the exact implementation details of
'bitmap_from_u64()', as reported by Sudip Mukherjee and Stephen Rothwell.
Fixes: fe92ee6425 ("Bluetooth: hci_core: Rework hci_conn_params flags")
Link: https://lore.kernel.org/all/YpyJ9qTNHJzz0FHY@debian/
Link: https://lore.kernel.org/all/20220606080631.0c3014f2@canb.auug.org.au/
Link: https://lore.kernel.org/all/20220605162537.1604762-1-yury.norov@gmail.com/
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It used to grab an extra reference to struct file rather than
just transferring to caller the one it had removed from descriptor
table. New variant doesn't, and callers need to be adjusted.
Reported-and-tested-by: syzbot+47dd250f527cb7bebf24@syzkaller.appspotmail.com
Fixes: 6319194ec5 ("Unify the primitives for file descriptor closing")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull x86 SGX fix from Thomas Gleixner:
"A single fix for x86/SGX to prevent that memory which is allocated for
an SGX enclave is accounted to the wrong memory control group"
* tag 'x86-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Set active memcg prior to shmem allocation
Pull x86 mm cleanup from Thomas Gleixner:
"Use PAGE_ALIGNED() instead of open coding it in the x86/mm code"
* tag 'x86-mm-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Use PAGE_ALIGNED(x) instead of IS_ALIGNED(x, PAGE_SIZE)
Pull x86 microcode updates from Thomas Gleixner:
- Disable late microcode loading by default. Unless the HW people get
their act together and provide a required minimum version in the
microcode header for making a halfways informed decision its just
lottery and broken.
- Warn and taint the kernel when microcode is loaded late
- Remove the old unused microcode loader interface
- Remove a redundant perf callback from the microcode loader
* tag 'x86-microcode-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Remove unnecessary perf callback
x86/microcode: Taint and warn on late loading
x86/microcode: Default-disable late loading
x86/microcode: Rip out the OLD_INTERFACE
Pull x86 cleanups from Thomas Gleixner:
"A set of small x86 cleanups:
- Remove unused headers in the IDT code
- Kconfig indendation and comment fixes
- Fix all 'the the' typos in one go instead of waiting for bots to
fix one at a time"
* tag 'x86-cleanups-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Fix all occurences of the "the the" typo
x86/idt: Remove unused headers
x86/Kconfig: Fix indentation of arch/x86/Kconfig.debug
x86/Kconfig: Fix indentation and add endif comments to arch/x86/Kconfig
Pull x86 boot update from Thomas Gleixner:
"Use strlcpy() instead of strscpy() in arch_setup()"
* tag 'x86-boot-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/setup: Use strscpy() to replace deprecated strlcpy()
Pull clockevent/clocksource updates from Thomas Gleixner:
- Device tree bindings for MT8186
- Tell the kernel that the RISC-V SBI timer stops in deeper power
states
- Make device tree parsing in sp804 more robust
- Dead code removal and tiny fixes here and there
- Add the missing SPDX identifiers
* tag 'timers-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/oxnas-rps: Fix irq_of_parse_and_map() return value
clocksource/drivers/timer-ti-dm: Remove unnecessary NULL check
clocksource/drivers/timer-sun5i: Convert to SPDX identifier
clocksource/drivers/timer-sun4i: Convert to SPDX identifier
clocksource/drivers/pistachio: Convert to SPDX identifier
clocksource/drivers/orion: Convert to SPDX identifier
clocksource/drivers/lpc32xx: Convert to SPDX identifier
clocksource/drivers/digicolor: Convert to SPDX identifier
clocksource/drivers/armada-370-xp: Convert to SPDX identifier
clocksource/drivers/mips-gic-timer: Convert to SPDX identifier
clocksource/drivers/jcore: Convert to SPDX identifier
clocksource/drivers/bcm_kona: Convert to SPDX identifier
clocksource/drivers/sp804: Avoid error on multiple instances
clocksource/drivers/riscv: Events are stopped during CPU suspend
clocksource/drivers/ixp4xx: Drop boardfile probe path
dt-bindings: timer: Add compatible for Mediatek MT8186
Pull scheduler fix from Thomas Gleixner:
"Fix the fallout of sysctl code move which placed the init function
wrong"
* tag 'sched-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/autogroup: Fix sysctl move
Pull perf fixes from Thomas Gleixner:
- Make the ICL event constraints match reality
- Remove a unused local variable
* tag 'perf-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Remove unused local variable
perf/x86/intel: Fix event constraints for ICL
Pull perf fixlet from Thomas Gleixner:
"Trivial indentation fix in Kconfig"
* tag 'perf-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/Kconfig: Fix indentation in the Kconfig file
Pull objtool fixes from Thomas Gleixner:
- Handle __ubsan_handle_builtin_unreachable() correctly and treat it as
noreturn
- Allow architectures to select uaccess validation
- Use the non-instrumented bit test for test_cpu_has() to prevent
escape from non-instrumentable regions
- Use arch_ prefixed atomics for JUMP_LABEL=n builds to prevent escape
from non-instrumentable regions
- Mark a few tiny inline as __always_inline to prevent GCC from
bringing them out of line and instrumenting them
- Mark the empty stub context_tracking_enabled() as always inline as
GCC brings them out of line and instruments the empty shell
- Annotate ex_handler_msr_mce() as dead end
* tag 'objtool-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/extable: Annotate ex_handler_msr_mce() as a dead end
context_tracking: Always inline empty stubs
x86: Always inline on_thread_stack() and current_top_of_stack()
jump_label,noinstr: Avoid instrumentation for JUMP_LABEL=n builds
x86/cpu: Elide KCSAN for cpu_has() and friends
objtool: Mark __ubsan_handle_builtin_unreachable() as noreturn
objtool: Add CONFIG_HAVE_UACCESS_VALIDATION
Pull more SCSI updates from James Bottomley:
"Mostly small bug fixes plus other trivial updates.
The major change of note is moving ufs out of scsi and a minor update
to lpfc vmid handling"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits)
scsi: qla2xxx: Remove unused 'ql_dm_tgt_ex_pct' parameter
scsi: qla2xxx: Remove setting of 'req' and 'rsp' parameters
scsi: mpi3mr: Fix kernel-doc
scsi: lpfc: Add support for ATTO Fibre Channel devices
scsi: core: Return BLK_STS_TRANSPORT for ALUA transitioning
scsi: sd_zbc: Prevent zone information memory leak
scsi: sd: Fix potential NULL pointer dereference
scsi: mpi3mr: Rework mrioc->bsg_device model to fix warnings
scsi: myrb: Fix up null pointer access on myrb_cleanup()
scsi: core: Unexport scsi_bus_type
scsi: sd: Don't call blk_cleanup_disk() in sd_probe()
scsi: ufs: ufshcd: Delete unnecessary NULL check
scsi: isci: Fix typo in comment
scsi: pmcraid: Fix typo in comment
scsi: smartpqi: Fix typo in comment
scsi: qedf: Fix typo in comment
scsi: esas2r: Fix typo in comment
scsi: storvsc: Fix typo in comment
scsi: ufs: Split the drivers/scsi/ufs directory
scsi: qla1280: Remove redundant variable
...
Pull hardware timestamping subsystem from Thierry Reding:
"This contains the new HTE (hardware timestamping engine) subsystem
that has been in the works for a couple of months now.
The infrastructure provided allows for drivers to register as hardware
timestamp providers, while consumers will be able to request events
that they are interested in (such as GPIOs and IRQs) to be timestamped
by the hardware providers.
Note that this currently supports only one provider, but there seems
to be enough interest in this functionality and we expect to see more
drivers added once this is merged"
[ Linus Walleij mentions the Intel PMC in the Elkhart and Tiger Lake
platforms as another future timestamp provider ]
* tag 'hte/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: timestamp: Correct id path
dt-bindings: Renamed hte directory to timestamp
hte: Uninitialized variable in hte_ts_get()
hte: Fix off by one in hte_push_ts_ns()
hte: Fix possible use-after-free in tegra_hte_test_remove()
hte: Remove unused including <linux/version.h>
MAINTAINERS: Add HTE Subsystem
hte: Add Tegra HTE test driver
tools: gpio: Add new hardware clock type
gpiolib: cdev: Add hardware timestamp clock type
gpio: tegra186: Add HTE support
gpiolib: Add HTE support
dt-bindings: Add HTE bindings
hte: Add Tegra194 HTE kernel provider
drivers: Add hardware timestamp engine (HTE) subsystem
Documentation: Add HTE subsystem guide
Pull more Kbuild updates from Masahiro Yamada:
- Fix build regressions for parisc, csky, nios2, openrisc
- Simplify module builds for CONFIG_LTO_CLANG and CONFIG_X86_KERNEL_IBT
- Remove arch/parisc/nm, which was presumably a workaround for old
tools
- Check the odd combination of EXPORT_SYMBOL and 'static' precisely
- Make external module builds robust against "too long argument error"
- Support j, k keys for moving the cursor in nconfig
* tag 'kbuild-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
kbuild: Allow to select bash in a modified environment
scripts: kconfig: nconf: make nconfig accept jk keybindings
modpost: use fnmatch() to simplify match()
modpost: simplify mod->name allocation
kbuild: factor out the common objtool arguments
kbuild: move vmlinux.o link to scripts/Makefile.vmlinux_o
kbuild: clean .tmp_* pattern by make clean
kbuild: remove redundant cleanups in scripts/link-vmlinux.sh
kbuild: rebuild multi-object modules when objtool is updated
kbuild: add cmd_and_savecmd macro
kbuild: make *.mod rule robust against too long argument error
kbuild: make built-in.a rule robust against too long argument error
kbuild: check static EXPORT_SYMBOL* by script instead of modpost
parisc: remove arch/parisc/nm
kbuild: do not create *.prelink.o for Clang LTO or IBT
kbuild: replace $(linked-object) with CONFIG options
kbuild: do not try to parse *.cmd files for objects provided by compiler
kbuild: replace $(if A,A,B) with $(or A,B) in scripts/Makefile.modpost
modpost: squash if...else-if in find_elf_symbol2()
modpost: reuse ARRAY_SIZE() macro for section_mismatch()
...
Pull vfs pathname updates from Al Viro:
"Several cleanups in fs/namei.c"
* tag 'pull-18-rc1-work.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
namei: cleanup double word in comment
get rid of dead code in legitimize_root()
fs/namei.c:reserve_stack(): tidy up the call of try_to_unlazy()
Pull mount handling updates from Al Viro:
"Cleanups (and one fix) around struct mount handling.
The fix is usermode_driver.c one - once you've done kern_mount(), you
must kern_unmount(); simple mntput() will end up with a leak. Several
failure exits in there messed up that way... In practice you won't hit
those particular failure exits without fault injection, though"
* tag 'pull-18-rc1-work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
move mount-related externs from fs.h to mount.h
blob_to_mnt(): kern_unmount() is needed to undo kern_mount()
m->mnt_root->d_inode->i_sb is a weird way to spell m->mnt_sb...
linux/mount.h: trim includes
uninline may_mount() and don't opencode it in fspick(2)/fsopen(2)
Pull file descriptor updates from Al Viro.
- Descriptor handling cleanups
* tag 'pull-18-rc1-work.fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
Unify the primitives for file descriptor closing
fs: remove fget_many and fput_many interface
io_uring_enter(): don't leave f.flags uninitialized
Pull cifs client fixes from Steve French:
"Nine cifs/smb3 client fixes.
Includes DFS fixes, some cleanup of leagcy SMB1 code, duplicated
message cleanup and a double free and deadlock fix"
* tag '5.19-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix uninitialized pointer in error case in dfs_cache_get_tgt_share
cifs: skip trailing separators of prefix paths
cifs: update internal module number
cifs: version operations for smb20 unneeded when legacy support disabled
cifs: do not build smb1ops if legacy support is disabled
cifs: fix potential deadlock in direct reclaim
cifs: when extending a file with falloc we should make files not-sparse
cifs: remove repeated debug message on cifs_put_smb_ses()
cifs: fix potential double free during failed mount
