KVM x86 misc changes for 6.12
- Advertise AVX10.1 to userspace (effectively prep work for the "real" AVX10
functionality that is on the horizon).
- Rework common MSR handling code to suppress errors on userspace accesses to
unsupported-but-advertised MSRs. This will allow removing (almost?) all of
KVM's exemptions for userspace access to MSRs that shouldn't exist based on
the vCPU model (the actual cleanup is non-trivial future work).
- Rework KVM's handling of x2APIC ICR, again, because AMD (x2AVIC) splits the
64-bit value into the legacy ICR and ICR2 storage, whereas Intel (APICv)
stores the entire 64-bit value a the ICR offset.
- Fix a bug where KVM would fail to exit to userspace if one was triggered by
a fastpath exit handler.
- Add fastpath handling of HLT VM-Exit to expedite re-entering the guest when
there's already a pending wake event at the time of the exit.
- Finally fix the RSM vs. nested VM-Enter WARN by forcing the vCPU out of
guest mode prior to signalling SHUTDOWN (architecturally, the SHUTDOWN is
supposed to hit L1, not L2).
KVK generic changes for 6.12:
- Fix a bug that results in KVM prematurely exiting to userspace for coalesced
MMIO/PIO in many cases, clean up the related code, and add a testcase.
- Fix a bug in kvm_clear_guest() where it would trigger a buffer overflow _if_
the gpa+len crosses a page boundary, which thankfully is guaranteed to not
happen in the current code base. Add WARNs in more helpers that read/write
guest memory to detect similar bugs.
Register KVM's cpuhp and syscore callbacks when enabling virtualization in
hardware, as the sole purpose of said callbacks is to disable and re-enable
virtualization as needed.
The primary motivation for this series is to simplify dealing with enabling
virtualization for Intel's TDX, which needs to enable virtualization
when kvm-intel.ko is loaded, i.e. long before the first VM is created.
That said, this is a nice cleanup on its own. By registering the callbacks
on-demand, the callbacks themselves don't need to check kvm_usage_count,
because their very existence implies a non-zero count.
Patch 1 (re)adds a dedicated lock for kvm_usage_count. This avoids a
lock ordering issue between cpus_read_lock() and kvm_lock. The lock
ordering issue still exist in very rare cases, and will be fixed for
good by switching vm_list to an (S)RCU-protected list.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Today whenever a memslot is moved or deleted, KVM invalidates the entire
page tables and generates fresh ones based on the new memslot layout.
This behavior traditionally was kept because of a bug which was never
fully investigated and caused VM instability with assigned GeForce
GPUs. It generally does not have a huge overhead, because the old
MMU is able to reuse cached page tables and the new one is more
scalabale and can resolve EPT violations/nested page faults in parallel,
but it has worse performance if the guest frequently deletes and
adds small memslots, and it's entirely not viable for TDX. This is
because TDX requires re-accepting of private pages after page dropping.
For non-TDX VMs, this series therefore introduces the
KVM_X86_QUIRK_SLOT_ZAP_ALL quirk, enabling users to control the behavior
of memslot zapping when a memslot is moved/deleted. The quirk is turned
on by default, leading to the zapping of all SPTEs when a memslot is
moved/deleted; users however have the option to turn off the quirk,
which limits the zapping only to those SPTEs hat lie within the range
of memslot being moved/deleted.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add test case running code interacting with registers within a
ucontrol VM.
* Add uc_gprs test case
The test uses the same VM setup using the fixture and debug macros
introduced in earlier patches in this series.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20240807154512.316936-7-schlameuss@linux.ibm.com
[frankja@linux.ibm.com: Removed leftover comment line]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20240807154512.316936-7-schlameuss@linux.ibm.com>
KVM/riscv changes for 6.12
- Fix sbiret init before forwarding to userspace
- Don't zero-out PMU snapshot area before freeing data
- Allow legacy PMU access from guest
- Fix to allow hpmcounter31 from the guest
LoongArch KVM changes for v6.12
1. Revert qspinlock to test-and-set simple lock on VM.
2. Add Loongson Binary Translation extension support.
3. Add PMU support for guest.
4. Enable paravirt feature control from VMM.
5. Implement function kvm_para_has_feature().
KVM/arm64 updates for 6.12
* New features:
- Add a Stage-2 page table dumper, reusing the main ptdump
infrastructure, and allowing easier debugging of the our
page-table infrastructure
- Add FP8 support to the KVM/arm64 floating point handling.
- Add NV support for the AT family of instructions, which mostly
results in adding a page table walker that deals with most of the
complexity of the architecture.
* Improvements, fixes and cleanups:
- Add selftest checks for a bunch of timer emulation corner cases
- Fix the multiple of cases where KVM/arm64 doesn't correctly handle
the guest trying to use a GICv3 that isn't advertised
- Remove REG_HIDDEN_USER from the sysreg infrastructure, making
things little more simple
- Prevent MTE tags being restored by userspace if we are actively
logging writes, as that's a recipe for disaster
- Correct the refcount on a page that is not considered for MTE tag
copying (such as a device)
- Relax the synchronisation when walking a page table to split block
mappings, moving it at the end the walk, as there is no need to
perform it on every store.
- Fix boundary check when transfering memory using FFA
- Fix pKVM TLB invalidation, only affecting currently out of tree
code but worth addressing for peace of mind
Implement function kvm_para_has_feature() to detect supported paravirt
features. It can be used by device driver to detect and enable paravirt
features, such as the EIOINTC irqchip driver is able to detect feature
KVM_FEATURE_VIRT_EXTIOI and do some optimization.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Export kernel paravirt features to user space, so that VMM can control
each single paravirt feature. By default paravirt features will be the
same with kvm supported features if VMM does not set it.
Also a new feature KVM_FEATURE_VIRT_EXTIOI is added which can be set
from user space. This feature indicates that the virt EIOINTC can route
interrupts to 256 vCPUs, rather than 4 vCPUs like with real HW.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
On LoongArch, the host and guest have their own PMU CSRs registers and
they share PMU hardware resources. A set of PMU CSRs consists of a CTRL
register and a CNTR register. We can set which PMU CSRs are used by the
guest by writing to the GCFG register [24:26] bits.
On KVM side:
- Save the host PMU CSRs into structure kvm_context.
- If the host supports the PMU feature.
- When entering guest mode, save the host PMU CSRs and restore the guest PMU CSRs.
- When exiting guest mode, save the guest PMU CSRs and restore the host PMU CSRs.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
* kvm-arm64/visibility-cleanups:
: .
: Remove REG_HIDDEN_USER from the sysreg infrastructure, making things
: a little more simple. From the cover letter:
:
: "Since 4d4f52052b ("KVM: arm64: nv: Drop EL12 register traps that are
: redirected to VNCR") and the admission that KVM would never be supporting
: the original FEAT_NV, REG_HIDDEN_USER only had a few users, all of which
: could either be replaced by a more ad-hoc mechanism, or removed altogether."
: .
KVM: arm64: Get rid of REG_HIDDEN_USER visibility qualifier
KVM: arm64: Simplify visibility handling of AArch32 SPSR_*
KVM: arm64: Simplify handling of CNTKCTL_EL12
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/s2-ptdump:
: .
: Stage-2 page table dumper, reusing the main ptdump infrastructure,
: courtesy of Sebastian Ene. From the cover letter:
:
: "This series extends the ptdump support to allow dumping the guest
: stage-2 pagetables. When CONFIG_PTDUMP_STAGE2_DEBUGFS is enabled, ptdump
: registers the new following files under debugfs:
: - /sys/debug/kvm/<guest_id>/stage2_page_tables
: - /sys/debug/kvm/<guest_id>/stage2_levels
: - /sys/debug/kvm/<guest_id>/ipa_range
:
: This allows userspace tools (eg. cat) to dump the stage-2 pagetables by
: reading the 'stage2_page_tables' file.
: [...]"
: .
KVM: arm64: Register ptdump with debugfs on guest creation
arm64: ptdump: Don't override the level when operating on the stage-2 tables
arm64: ptdump: Use the ptdump description from a local context
arm64: ptdump: Expose the attribute parsing functionality
KVM: arm64: Move pagetable definitions to common header
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/nv-at-pan:
: .
: Add NV support for the AT family of instructions, which mostly results
: in adding a page table walker that deals with most of the complexity
: of the architecture.
:
: From the cover letter:
:
: "Another task that a hypervisor supporting NV on arm64 has to deal with
: is to emulate the AT instruction, because we multiplex all the S1
: translations on a single set of registers, and the guest S2 is never
: truly resident on the CPU.
:
: So given that we lie about page tables, we also have to lie about
: translation instructions, hence the emulation. Things are made
: complicated by the fact that guest S1 page tables can be swapped out,
: and that our shadow S2 is likely to be incomplete. So while using AT
: to emulate AT is tempting (and useful), it is not going to always
: work, and we thus need a fallback in the shape of a SW S1 walker."
: .
KVM: arm64: nv: Add support for FEAT_ATS1A
KVM: arm64: nv: Plumb handling of AT S1* traps from EL2
KVM: arm64: nv: Make AT+PAN instructions aware of FEAT_PAN3
KVM: arm64: nv: Sanitise SCTLR_EL1.EPAN according to VM configuration
KVM: arm64: nv: Add SW walker for AT S1 emulation
KVM: arm64: nv: Make ps_to_output_size() generally available
KVM: arm64: nv: Add emulation of AT S12E{0,1}{R,W}
KVM: arm64: nv: Add basic emulation of AT S1E2{R,W}
KVM: arm64: nv: Add basic emulation of AT S1E1{R,W}P
KVM: arm64: nv: Add basic emulation of AT S1E{0,1}{R,W}
KVM: arm64: nv: Honor absence of FEAT_PAN2
KVM: arm64: nv: Turn upper_attr for S2 walk into the full descriptor
KVM: arm64: nv: Enforce S2 alignment when contiguous bit is set
arm64: Add ESR_ELx_FSC_ADDRSZ_L() helper
arm64: Add system register encoding for PSTATE.PAN
arm64: Add PAR_EL1 field description
arm64: Add missing APTable and TCR_ELx.HPD masks
KVM: arm64: Make kvm_at() take an OP_AT_*
Signed-off-by: Marc Zyngier <maz@kernel.org>
# Conflicts:
# arch/arm64/kvm/nested.c
* kvm-arm64/vgic-sre-traps:
: .
: Fix the multiple of cases where KVM/arm64 doesn't correctly
: handle the guest trying to use a GICv3 that isn't advertised.
:
: From the cover letter:
:
: "It recently appeared that, when running on a GICv3-equipped platform
: (which is what non-ancient arm64 HW has), *not* configuring a GICv3
: for the guest could result in less than desirable outcomes.
:
: We have multiple issues to fix:
:
: - for registers that *always* trap (the SGI registers) or that *may*
: trap (the SRE register), we need to check whether a GICv3 has been
: instantiated before acting upon the trap.
:
: - for registers that only conditionally trap, we must actively trap
: them even in the absence of a GICv3 being instantiated, and handle
: those traps accordingly.
:
: - finally, ID registers must reflect the absence of a GICv3, so that
: we are consistent.
:
: This series goes through all these requirements. The main complexity
: here is to apply a GICv3 configuration on the host in the absence of a
: GICv3 in the guest. This is pretty hackish, but I don't have a much
: better solution so far.
:
: As part of making wider use of of the trap bits, we fully define the
: trap routing as per the architecture, something that we eventually
: need for NV anyway."
: .
KVM: arm64: selftests: Cope with lack of GICv3 in set_id_regs
KVM: arm64: Add selftest checking how the absence of GICv3 is handled
KVM: arm64: Unify UNDEF injection helpers
KVM: arm64: Make most GICv3 accesses UNDEF if they trap
KVM: arm64: Honor guest requested traps in GICv3 emulation
KVM: arm64: Add trap routing information for ICH_HCR_EL2
KVM: arm64: Add ICH_HCR_EL2 to the vcpu state
KVM: arm64: Zero ID_AA64PFR0_EL1.GIC when no GICv3 is presented to the guest
KVM: arm64: Add helper for last ditch idreg adjustments
KVM: arm64: Force GICv3 trap activation when no irqchip is configured on VHE
KVM: arm64: Force SRE traps when SRE access is not enabled
KVM: arm64: Move GICv3 trap configuration to kvm_calculate_traps()
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/fpmr:
: .
: Add FP8 support to the KVM/arm64 floating point handling.
:
: This includes new ID registers (ID_AA64PFR2_EL1 ID_AA64FPFR0_EL1)
: being made visible to guests, as well as a new confrol register
: (FPMR) which gets context-switched.
: .
KVM: arm64: Expose ID_AA64PFR2_EL1 to userspace and guests
KVM: arm64: Enable FP8 support when available and configured
KVM: arm64: Expose ID_AA64FPFR0_EL1 as a writable ID reg
KVM: arm64: Honor trap routing for FPMR
KVM: arm64: Add save/restore support for FPMR
KVM: arm64: Move FPMR into the sysreg array
KVM: arm64: Add predicate for FPMR support in a VM
KVM: arm64: Move SVCR into the sysreg array
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/mmu-misc-6.12:
: .
: Various minor MMU improvements and bug-fixes:
:
: - Prevent MTE tags being restored by userspace if we are actively
: logging writes, as that's a recipe for disaster
:
: - Correct the refcount on a page that is not considered for MTE
: tag copying (such as a device)
:
: - When walking a page table to split blocks, keep the DSB at the end
: the walk, as there is no need to perform it on every store.
:
: - Fix boundary check when transfering memory using FFA
: .
KVM: arm64: Add memory length checks and remove inline in do_ffa_mem_xfer
KVM: arm64: Disallow copying MTE to guest memory while KVM is dirty logging
KVM: arm64: Release pfn, i.e. put page, if copying MTE tags hits ZONE_DEVICE
KVM: arm64: Move data barrier to end of split walk
Signed-off-by: Marc Zyngier <maz@kernel.org>
Since SPSR_* are not associated with any register in the sysreg array,
nor do they have .get_user()/.set_user() helpers, they are invisible to
userspace with that encoding.
Therefore hidden_user_visibility() serves no purpose here, and can be
safely removed.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240904082419.1982402-3-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
We go trough a great deal of effort to map CNTKCTL_EL12 to CNTKCTL_EL1
while hidding this mapping from userspace via a special visibility helper.
However, it would be far simpler to just provide an accessor doing the
mapping job, removing the need for a visibility helper.
With that done, we can also remove the EL12_REG() macro which serves
no purpose.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240904082419.1982402-2-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Every vcpu has separate LBT registers. And there are four scr registers,
one flags and ftop register for LBT extension. When VM migrates, VMM
needs to get LBT registers for every vcpu.
Here macro KVM_REG_LOONGARCH_LBT is added for new vcpu lbt register type,
the following macro is added to get/put LBT registers.
KVM_REG_LOONGARCH_LBT_SCR0
KVM_REG_LOONGARCH_LBT_SCR1
KVM_REG_LOONGARCH_LBT_SCR2
KVM_REG_LOONGARCH_LBT_SCR3
KVM_REG_LOONGARCH_LBT_EFLAGS
KVM_REG_LOONGARCH_LBT_FTOP
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Loongson Binary Translation (LBT) is used to accelerate binary translation,
which contains 4 scratch registers (scr0 to scr3), x86/ARM eflags (eflags)
and x87 fpu stack pointer (ftop).
Like FPU extension, here a lazy enabling method is used for LBT. the LBT
context is saved/restored on the vcpu context switch path.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Loongson SIMD Extension (LSX), Loongson Advanced SIMD Extension (LASX)
and Loongson Binary Translation (LBT) features are defined in register
CPUCFG2. Two kinds of LSX/LASX/LBT feature detection are added here, one
is VCPU feature, and the other is VM feature. VCPU feature dection can
only work with VCPU thread itself, and requires VCPU thread is created
already. So LSX/LASX/LBT feature detection for VM is added also, it can
be done even if VM is not created, and also can be done by any threads
besides VCPU threads.
Here ioctl command KVM_HAS_DEVICE_ATTR is added for VM, and macro
KVM_LOONGARCH_VM_FEAT_CTRL is added to check supported feature. And
five sub-features relative with LSX/LASX/LBT are added as following:
KVM_LOONGARCH_VM_FEAT_LSX
KVM_LOONGARCH_VM_FEAT_LASX
KVM_LOONGARCH_VM_FEAT_X86BT
KVM_LOONGARCH_VM_FEAT_ARMBT
KVM_LOONGARCH_VM_FEAT_MIPSBT
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Similar with x86, when VM is detected, revert to a simple test-and-set
lock to avoid the horrors of queue preemption.
Tested on 3C5000 Dual-way machine with 32 cores and 2 numa nodes,
test case is kcbench on kernel mainline 6.10, the detailed command is
"kcbench --src /root/src/linux"
Performance on host machine
kernel compile time performance impact
Original 150.29 seconds
With patch 150.19 seconds almost no impact
Performance on virtual machine:
1. 1 VM with 32 vCPUs and 2 numa node, numa node pinned
kernel compile time performance impact
Original 170.87 seconds
With patch 171.73 seconds almost no impact
2. 2 VMs, each VM with 32 vCPUs and 2 numa node, numa node pinned
kernel compile time performance impact
Original 2362.04 seconds
With patch 354.73 seconds +565%
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
While arch/*/mem/ptdump handles the kernel pagetable dumping code,
introduce KVM/ptdump to show the guest stage-2 pagetables. The
separation is necessary because most of the definitions from the
stage-2 pagetable reside in the KVM path and we will be invoking
functionality specific to KVM. Introduce the PTDUMP_STAGE2_DEBUGFS config.
When a guest is created, register a new file entry under the guest
debugfs dir which allows userspace to show the contents of the guest
stage-2 pagetables when accessed.
[maz: moved function prototypes from kvm_host.h to kvm_mmu.h]
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Reviewed-by: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/r/20240909124721.1672199-6-sebastianene@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Rename the attributes description array to allow the parsing method
to use the description from a local context. To be able to do this,
store a pointer to the description array in the state structure. This
will allow for the later introduced callers (stage_2 ptdump) to specify
their own page table description format to the ptdump parser.
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240909124721.1672199-4-sebastianene@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
When we share memory through FF-A and the description of the buffers
exceeds the size of the mapped buffer, the fragmentation API is used.
The fragmentation API allows specifying chunks of descriptors in subsequent
FF-A fragment calls and no upper limit has been established for this.
The entire memory region transferred is identified by a handle which can be
used to reclaim the transferred memory.
To be able to reclaim the memory, the description of the buffers has to fit
in the ffa_desc_buf.
Add a bounds check on the FF-A sharing path to prevent the memory reclaim
from failing.
Also do_ffa_mem_xfer() does not need __always_inline, except for the
BUILD_BUG_ON() aspect, which gets moved to a macro.
[maz: fixed the BUILD_BUG_ON() breakage with LLVM, thanks to Wei-Lin Chang
for the timely report]
Fixes: 634d90cf0a ("KVM: arm64: Handle FFA_MEM_LEND calls from the host")
Cc: stable@vger.kernel.org
Reviewed-by: Sebastian Ene <sebastianene@google.com>
Signed-off-by: Snehal Koukuntla <snehalreddy@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240909180154.3267939-1-snehalreddy@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
When reading or writing a guest page, WARN and bail if offset+len would
result in a read to a different page so that KVM bugs are more likely to
be detected, and so that any such bugs are less likely to escalate to an
out-of-bounds access. E.g. if userspace isn't using guard pages and the
target page is at the end of a memslot.
Note, KVM already hardens itself in similar APIs, e.g. in the "cached"
variants, it's just the vanilla APIs that are playing with fire.
Link: https://lore.kernel.org/r/20240829191413.900740-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Leave nested mode before synthesizing shutdown (a.k.a. TRIPLE_FAULT) if
RSM fails when resuming L2 (a.k.a. guest mode). Architecturally, shutdown
on RSM occurs _before_ the transition back to guest mode on both Intel and
AMD.
On Intel, per the SDM pseudocode, SMRAM state is loaded before critical
VMX state:
restore state normally from SMRAM;
...
CR4.VMXE := value stored internally;
IF internal storage indicates that the logical processor had been in
VMX operation (root or non-root)
THEN
enter VMX operation (root or non-root);
restore VMX-critical state as defined in Section 32.14.1;
...
restore current VMCS pointer;
FI;
AMD's APM is both less clearcut and more explicit. Because AMD CPUs save
VMCB and guest state in SMRAM itself, given the lack of anything in the
APM to indicate a shutdown in guest mode is possible, a straightforward
reading of the clause on invalid state is that _what_ state is invalid is
irrelevant, i.e. all roads lead to shutdown.
An RSM causes a processor shutdown if an invalid-state condition is
found in the SMRAM state-save area.
This fixes a bug found by syzkaller where synthesizing shutdown for L2
led to a nested VM-Exit (if L1 is intercepting shutdown), which in turn
caused KVM to complain about trying to cancel a nested VM-Enter (see
commit 759cbd5967 ("KVM: x86: nSVM/nVMX: set nested_run_pending on VM
entry which is a result of RSM").
Note, Paolo pointed out that KVM shouldn't set nested_run_pending until
after loading SMRAM state. But as above, that's only half the story, KVM
shouldn't transition to guest mode either. Unfortunately, fixing that
mess requires rewriting the nVMX and nSVM RSM flows to not piggyback
their nested VM-Enter flows, as executing the nested VM-Enter flows after
loading state from SMRAM would clobber much of said state.
For now, add a FIXME to call out that transitioning to guest mode before
loading state from SMRAM is wrong.
Link: https://lore.kernel.org/all/CABgObfYaUHXyRmsmg8UjRomnpQ0Jnaog9-L2gMjsjkqChjDYUQ@mail.gmail.com
Reported-by: syzbot+988d9efcdf137bc05f66@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/0000000000007a9acb06151e1670@google.com
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Closes: https://lore.kernel.org/all/CAMhUBjmXMYsEoVYw_M8hSZjBMHh24i88QYm-RY6HDta5YZ7Wgw@mail.gmail.com
Analyzed-by: Michal Wilczynski <michal.wilczynski@intel.com>
Cc: Kishen Maloor <kishen.maloor@intel.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20240906161337.1118412-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Pull timer fixes from Borislav Petkov:
- Remove percpu irq related code in the timer-of initialization routine
as it is broken but also unused (Daniel Lezcano)
- Fix return -ETIME when delta exceeds INT_MAX and the next event not
taking effect sometimes (Jacky Bai)
* tag 'timers_urgent_for_v6.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/imx-tpm: Fix next event not taking effect sometime
clocksource/drivers/imx-tpm: Fix return -ETIME when delta exceeds INT_MAX
clocksource/drivers/timer-of: Remove percpu irq related code
Pull perf fixes from Borislav Petkov:
- Fix perf's AUX buffer serialization
- Prevent uninitialized struct members in perf's uprobes handling
* tag 'perf_urgent_for_v6.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/aux: Fix AUX buffer serialization
uprobes: Use kzalloc to allocate xol area
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc/other driver fixes for 6.11-rc7. It's
nothing huge, just a bunch of small fixes of reported problems,
including:
- lots of tiny iio driver fixes
- nvmem driver fixex
- binder UAF bugfix
- uio driver crash fix
- other small fixes
All of these have been in linux-next this week with no reported
problems"
* tag 'char-misc-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
VMCI: Fix use-after-free when removing resource in vmci_resource_remove()
Drivers: hv: vmbus: Fix rescind handling in uio_hv_generic
uio_hv_generic: Fix kernel NULL pointer dereference in hv_uio_rescind
misc: keba: Fix sysfs group creation
dt-bindings: nvmem: Use soc-nvmem node name instead of nvmem
nvmem: Fix return type of devm_nvmem_device_get() in kerneldoc
nvmem: u-boot-env: error if NVMEM device is too small
misc: fastrpc: Fix double free of 'buf' in error path
binder: fix UAF caused by offsets overwrite
iio: imu: inv_mpu6050: fix interrupt status read for old buggy chips
iio: adc: ad7173: fix GPIO device info
iio: adc: ad7124: fix DT configuration parsing
iio: adc: ad_sigma_delta: fix irq_flags on irq request
iio: adc: ads1119: Fix IRQ flags
iio: fix scale application in iio_convert_raw_to_processed_unlocked
iio: adc: ad7124: fix config comparison
iio: adc: ad7124: fix chip ID mismatch
iio: adc: ad7173: Fix incorrect compatible string
iio: buffer-dmaengine: fix releasing dma channel on error
iio: adc: ad7606: remove frstdata check for serial mode
...
Pull USB fixes from Greg KH:
"Here are a handful of small USB fixes for 6.11-rc7. Included in here
are:
- dwc3 driver fixes for two reported problems
- two typec ucsi driver fixes
- cdns2 controller reset fix
All of these have been in linux-next this week with no reported
problems"
* tag 'usb-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Fix cable registration
usb: typec: ucsi: Fix the partner PD revision
usb: cdns2: Fix controller reset issue
usb: dwc3: core: update LC timer as per USB Spec V3.2
usb: dwc3: Avoid waking up gadget during startxfer
Pull clk fixes from Stephen Boyd:
"A pile of Qualcomm clk driver fixes with two main themes: the alpha
PLL driver and shared RCGs, and one fix for the Starfive JH7110 SoC.
- The Alpha PLL clk_ops had multiple problems around setting rates.
There are a handful of patches here that fix masks and skip
enabling the clk from set_rate() when the PLL is disabled. The PLLs
are crucial to operation of the system as almost all frequencies in
the system are derived from them.
- Parking shared RCGs at a slow always on clk at registration time
breaks stuff.
USB host mode can't handle such a slow frequency and the serial
console gets all garbled when the UART clk is handed over to the
kernel. There's a few patches that don't use the shared clk_ops for
the UART clks and another one to skip parking the USB clk at
registration time.
- The Starfive PLL driver used for the CPU was busted causing cpufreq
to fail because the clk didn't change to a safe parent during
set_rate().
The fix is to register a notifier and switch to a safe parent so
the PLL can change rate in a glitch free manner"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: gcc-sc8280xp: don't use parking clk_ops for QUPs
clk: starfive: jh7110-sys: Add notifier for PLL0 clock
clk: qcom: gcc-sm8650: Don't use shared clk_ops for QUPs
clk: qcom: gcc-sm8550: Don't park the USB RCG at registration time
clk: qcom: gcc-sm8550: Don't use parking clk_ops for QUPs
clk: qcom: gcc-x1e80100: Don't use parking clk_ops for QUPs
clk: qcom: ipq9574: Update the alpha PLL type for GPLLs
clk: qcom: gcc-x1e80100: Fix USB 0 and 1 PHY GDSC pwrsts flags
clk: qcom: clk-alpha-pll: Update set_rate for Zonda PLL
clk: qcom: clk-alpha-pll: Fix zonda set_rate failure when PLL is disabled
clk: qcom: clk-alpha-pll: Fix the trion pll postdiv set rate API
clk: qcom: clk-alpha-pll: Fix the pll post div mask
Pull SCSI fix from James Bottomley:
"Single ufs driver fix quirking around another device spec violation"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: ufs-mediatek: Add UFSHCD_QUIRK_BROKEN_LSDBS_CAP
Pull pin control fix from Linus Walleij:
"A single fix for Qualcomm laptops that are affected by
missing wakeup IRQs"
* tag 'pinctrl-v6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: x1e80100: Bypass PDC wakeup parent for now
PullKUnit fix from Shuah Khan:
"Fix to a missing function parameter warning found during documentation
build in linux-next"
* tag 'linux_kselftest-kunit-fixes-6.11-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Fix missing kerneldoc comment
Pull pci fixes from Bjorn Helgaas:
- Unregister platform devices for child nodes when stopping a PCI
device, even if the PCI core has already cleared the OF_POPULATED bit
and of_platform_depopulate() doesn't do anything (Bartosz
Golaszewski)
- Rescan the bus from a separate thread so we don't deadlock when
triggering rescan from sysfs (Bartosz Golaszewski)
* tag 'pci-v6.11-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/pwrctl: Rescan bus on a separate thread
PCI: Don't rely on of_platform_depopulate() for reused OF-nodes
Pull smb client fixes from Steve French:
- fix potential mount hang
- fix retry problem in two types of compound operations
- important netfs integration fix in SMB1 read paths
- fix potential uninitialized zero point of inode
- minor patch to improve debugging for potential crediting problems
* tag 'v6.11-rc6-cifs-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
netfs, cifs: Improve some debugging bits
cifs: Fix SMB1 readv/writev callback in the same way as SMB2/3
cifs: Fix zero_point init on inode initialisation
smb: client: fix double put of @cfile in smb2_set_path_size()
smb: client: fix double put of @cfile in smb2_rename_path()
smb: client: fix hang in wait_for_response() for negproto
clang warns on this because it has an unannotated fall-through between
cases:
arch/x86/kvm/x86.c:4819:2: error: unannotated fall-through between switch labels [-Werror,-Wimplicit-fallthrough]
and while we could annotate it as a fallthrough, the proper fix is to
just add the break for this case, instead of falling through to the
default case and the break there.
gcc also has that warning, but it looks like gcc only warns for the
cases where they fall through to "real code", rather than to just a
break. Odd.
Fixes: d30d9ee94c ("KVM: x86: Only advertise KVM_CAP_READONLY_MEM when supported by VM")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Tom Dohrmann <erbse.13@gmx.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull arm64 fix from Catalin Marinas:
"Fix the arm64 usage of ftrace_graph_ret_addr() to pass the
&state->graph_idx pointer instead of NULL, otherwise this function
just returns early"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: stacktrace: fix the usage of ftrace_graph_ret_addr()
