With commit 51a4df60db ("net: ethernet: mtk_eth_soc: convert caps in
mtk_soc_data struct to u64") the capabilities bitfield was converted to
a 64-bit value, but a cap_bit in struct mtk_eth_muxc which is used to
store a full bitfield (rather than the bit number, as the name would
suggest) still holds only a 32-bit value.
Change the type of cap_bit to u64 in order to avoid truncating the
bitfield which results in path selection to not work with capabilities
above the 32-bit limit.
The values currently stored in the cap_bit field are
MTK_ETH_MUX_GDM1_TO_GMAC1_ESW:
BIT_ULL(18) | BIT_ULL(5)
MTK_ETH_MUX_GMAC2_GMAC0_TO_GEPHY:
BIT_ULL(19) | BIT_ULL(5) | BIT_ULL(6)
MTK_ETH_MUX_U3_GMAC2_TO_QPHY:
BIT_ULL(20) | BIT_ULL(5) | BIT_ULL(6)
MTK_ETH_MUX_GMAC1_GMAC2_TO_SGMII_RGMII:
BIT_ULL(20) | BIT_ULL(5) | BIT_ULL(7)
MTK_ETH_MUX_GMAC12_TO_GEPHY_SGMII:
BIT_ULL(21) | BIT_ULL(5)
While all those values are currently still within 32-bit boundaries,
the addition of new capabilities of MT7988 as well as future SoC's
like MT7987 will exceed them. Also, the use of a 32-bit 'int' type to
store the result of a BIT_ULL(...) is misleading.
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/ded98b0d716c3203017a7a92151516ec2bf1abee.1745369249.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove three functions that are no longer used.
rxrpc_get_txbuf() last use was removed by 2020's
commit 5e6ef4f101 ("rxrpc: Make the I/O thread take over the call and
local processor work")
rxrpc_kernel_get_epoch() last use was removed by 2020's
commit 44746355cc ("afs: Don't get epoch from a server because it may be
ambiguous")
rxrpc_kernel_set_max_life() last use was removed by 2023's
commit db099c625b ("rxrpc: Fix timeout of a call that hasn't yet been
granted a channel")
Both of the rxrpc_kernel_* functions were documented. Remove that
documentation as well as the code.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/20250422235147.146460-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Justin Chen says:
====================
net: bcmasp: Add v3.0 and remove v2.0
asp-v2.0 had one supported SoC that never saw the light of day.
Given that it was the first iteration of the HW, it ended up with
some one off HW design decisions that were changed in futher iterations
of the HW. We remove support to simplify the code and make it easier to
add future revisions.
Add support for asp-v3.0. asp-v3.0 reduces the feature set for cost
savings. We reduce the number of channel/network filters. And also
remove some features and statistics.
====================
Link: https://patch.msgid.link/20250422233645.1931036-1-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.15-rc4).
This pull includes wireless and a fix to vxlan which isn't
in Linus's tree just yet. The latter creates with a silent conflict
/ build breakage, so merging it now to avoid causing problems.
drivers/net/vxlan/vxlan_vnifilter.c
094adad913 ("vxlan: Use a single lock to protect the FDB table")
087a9eb9e5 ("vxlan: vnifilter: Fix unlocked deletion of default FDB entry")
https://lore.kernel.org/20250423145131.513029-1-idosch@nvidia.com
No "normal" conflicts, or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a VNI is deleted from a VXLAN device in 'vnifilter' mode, the FDB
entry associated with the default remote (assuming one was configured)
is deleted without holding the hash lock. This is wrong and will result
in a warning [1] being generated by the lockdep annotation that was
added by commit ebe6420674 ("vxlan: Create wrappers for FDB lookup").
Reproducer:
# ip link add vx0 up type vxlan dstport 4789 external vnifilter local 192.0.2.1
# bridge vni add vni 10010 remote 198.51.100.1 dev vx0
# bridge vni del vni 10010 dev vx0
Fix by acquiring the hash lock before the deletion and releasing it
afterwards. Blame the original commit that introduced the issue rather
than the one that exposed it.
[1]
WARNING: CPU: 3 PID: 392 at drivers/net/vxlan/vxlan_core.c:417 vxlan_find_mac+0x17f/0x1a0
[...]
RIP: 0010:vxlan_find_mac+0x17f/0x1a0
[...]
Call Trace:
<TASK>
__vxlan_fdb_delete+0xbe/0x560
vxlan_vni_delete_group+0x2ba/0x940
vxlan_vni_del.isra.0+0x15f/0x580
vxlan_process_vni_filter+0x38b/0x7b0
vxlan_vnifilter_process+0x3bb/0x510
rtnetlink_rcv_msg+0x2f7/0xb70
netlink_rcv_skb+0x131/0x360
netlink_unicast+0x426/0x710
netlink_sendmsg+0x75a/0xc20
__sock_sendmsg+0xc1/0x150
____sys_sendmsg+0x5aa/0x7b0
___sys_sendmsg+0xfc/0x180
__sys_sendmsg+0x121/0x1b0
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes: f9c4bb0b24 ("vxlan: vni filtering support on collect metadata device")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250423145131.513029-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Johannes Berg says:
====================
Some more fixes, notably:
* iwlwifi: various regression and iwlmld fixes
* mac80211: fix TX frames in monitor mode
* brcmfmac: error handling for firmware load
* tag 'wireless-2025-04-24' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: restore missing initialization of async_handlers_list
wifi: brcm80211: fmac: Add error handling for brcmf_usb_dl_writeimage()
wifi: plfxlc: Remove erroneous assert in plfxlc_mac_release
wifi: iwlwifi: fix the check for the SCRATCH register upon resume
wifi: iwlwifi: don't warn if the NIC is gone in resume
wifi: iwlwifi: mld: fix BAID validity check
wifi: iwlwifi: back off on continuous errors
wifi: iwlwifi: mld: only create debugfs symlink if it does not exist
wifi: iwlwifi: mld: inform trans on init failure
wifi: iwlwifi: mld: properly handle async notification in op mode start
Revert "wifi: iwlwifi: make no_160 more generic"
Revert "wifi: iwlwifi: add support for BE213"
wifi: mac80211: restore monitor for outgoing frames
====================
Link: https://patch.msgid.link/20250424120535.56499-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Paolo Abeni:
"No fixes from any subtree.
Current release - regressions:
- net: fix the missing unlock for detached devices
Previous releases - regressions:
- sched: fix UAF vulnerability in HFSC qdisc
- lwtunnel: disable BHs when required
- mptcp: pm: defer freeing of MPTCP userspace path manager entries
- tipc: fix NULL pointer dereference in tipc_mon_reinit_self()
- eth: virtio-net: disable delayed refill when pausing rx
Previous releases - always broken:
- phylink: fix suspend/resume with WoL enabled and link down
- eth:
- mlx5: fix null-ptr-deref in mlx5_create_{inner_,}ttc_table()
- xen-netfront: handle NULL returned by xdp_convert_buff_to_frame()
- enetc: fix frame corruption on bpf_xdp_adjust_head/tail() and XDP_PASS
- stmmac: fix dwmac1000 ptp timestamp status offset
- pds_core: prevent possible adminq overflow/stuck condition
Misc:
- a bunch of MAINTAINERS updates"
* tag 'net-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (32 commits)
net: stmmac: fix multiplication overflow when reading timestamp
net: stmmac: fix dwmac1000 ptp timestamp status offset
net: dp83822: Fix OF_MDIO config check
pds_core: make wait_context part of q_info
pds_core: Remove unnecessary check in pds_client_adminq_cmd()
pds_core: handle unsupported PDS_CORE_CMD_FW_CONTROL result
pds_core: Prevent possible adminq overflow/stuck condition
net: dsa: mt7530: sync driver-specific behavior of MT7531 variants
selftests/tc-testing: Add test for HFSC queue emptying during peek operation
net_sched: hfsc: Fix a potential UAF in hfsc_dequeue() too
net_sched: hfsc: Fix a UAF vulnerability in class handling
selftests: mptcp: diag: use mptcp_lib_get_info_value
mptcp: pm: Defer freeing of MPTCP userspace path manager entries
net: ethernet: mtk_eth_soc: net: revise NETSYSv3 hardware configuration
tipc: fix NULL pointer dereference in tipc_mon_reinit_self()
virtio-net: disable delayed refill when pausing rx
net: phy: leds: fix memory leak
net: phylink: mac_link_(up|down)() clarifications
net: phylink: fix suspend/resume with WoL enabled and link down
net: lwtunnel: disable BHs when required
...
Pull crypto fixes from Herbert Xu:
- Revert acomp multibuffer tests which were buggy
- Fix off-by-one regression in new scomp code
- Lower quality setting on atmel-sha204a as it may not be random
* tag 'v6.15-p5' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: atmel-sha204a - Set hwrng quality to lowest possible
crypto: scomp - Fix off-by-one bug when calculating last page
Revert "crypto: testmgr - Add multibuffer acomp testing"
The temperature sensor enabled for mv88q222x devices also functions for
mv88q211x based devices. Unify the two devices probe functions to enable
the sensors for all devices supported by this driver.
The same oddity as for mv88q222x devices exists, the PHY link must be up
for a correct temperature reading to be reported.
# cat /sys/class/hwmon/hwmon9/temp1_input
-75000
# ifconfig end5 up
# cat /sys/class/hwmon/hwmon9/temp1_input
59000
Worth noting is that while the temperature register offsets and layout
are the same between mv88q211x and mv88q222x devices their names in the
datasheets are different. This change keeps the mv88q222x names for the
mv88q211x support.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250418145800.2420751-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The current way of reading a timestamp snapshot in stmmac can lead to
integer overflow, as the computation is done on 32 bits. The issue has
been observed on a dwmac-socfpga platform returning chaotic timestamp
values due to this overflow. The corresponding multiplication is done
with a MUL instruction, which returns 32 bit values. Explicitly casting
the value to 64 bits replaced the MUL with a UMLAL, which computes and
returns the result on 64 bits, and so returns correctly the timestamps.
Prevent this overflow by explicitly casting the intermediate value to
u64 to make sure that the whole computation is made on u64. While at it,
apply the same cast on the other dwmac variant (GMAC4) method for
snapshot retrieval.
Fixes: 477c3e1f63 ("net: stmmac: Introduce dwmac1000 timestamping operations")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250423-stmmac_ts-v2-2-e2cf2bbd61b1@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a PTP interrupt occurs, the driver accesses the wrong offset to
learn about the number of available snapshots in the FIFO for dwmac1000:
it should be accessing bits 29..25, while it is currently reading bits
19..16 (those are bits about the auxiliary triggers which have generated
the timestamps). As a consequence, it does not compute correctly the
number of available snapshots, and so possibly do not generate the
corresponding clock events if the bogus value ends up being 0.
Fix clock events generation by reading the correct bits in the timestamp
register for dwmac1000.
Fixes: 477c3e1f63 ("net: stmmac: Introduce dwmac1000 timestamping operations")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250423-stmmac_ts-v2-1-e2cf2bbd61b1@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Kuniyuki Iwashima says:
====================
ipv6: No RTNL for IPv6 routing table.
IPv6 routing tables are protected by each table's lock and work in
the interrupt context, which means we basically don't need RTNL to
modify an IPv6 routing table itself.
Currently, the control paths require RTNL because we may need to
perform device and nexthop lookups; we must prevent dev/nexthop from
going away from the netns.
This, however, can be achieved by RCU as well.
If we are in the RCU critical section while adding an IPv6 route,
synchronize_net() in __dev_change_net_namespace() and
unregister_netdevice_many_notify() guarantee that the dev will not be
moved to another netns or removed.
Also, nexthop is guaranteed not to be freed during the RCU grace period.
If we care about a race between nexthop removal and IPv6 route addition,
we can get rid of RTNL from the control paths.
Patch 1 moves a validation for RTA_MULTIPATH earlier.
Patch 2 removes RTNL for SIOCDELRT and RTM_DELROUTE.
Patch 3 ~ 11 moves validation and memory allocation earlier.
Patch 12 prevents a race between two requests for the same table.
Patch 13 & 14 prevents the nexthop race mentioned above.
Patch 15 removes RTNL for SIOCADDRT and RTM_NEWROUTE.
Test:
The script [0] lets each CPU-X create 100000 routes on table-X in a
batch.
On c7a.metal-48xl EC2 instance with 192 CPUs,
without this series:
$ sudo ./route_test.sh
start adding routes
added 19200000 routes (100000 routes * 192 tables).
total routes: 19200006
Time elapsed: 191577 milliseconds.
with this series:
$ sudo ./route_test.sh
start adding routes
added 19200000 routes (100000 routes * 192 tables).
total routes: 19200006
Time elapsed: 62854 milliseconds.
I changed the number of routes (1000 ~ 100000 per CPU/table) and
consistently saw it finish 3x faster with this series.
[0]
mkdir tmp
NS="test"
ip netns add $NS
ip -n $NS link add veth0 type veth peer veth1
ip -n $NS link set veth0 up
ip -n $NS link set veth1 up
TABLES=()
for i in $(seq $(nproc)); do
TABLES+=("$i")
done
ROUTES=()
for i in {1..100}; do
for j in {1..1000}; do
ROUTES+=("2001:$i:$j::/64")
done
done
for TABLE in "${TABLES[@]}"; do
(
FILE="./tmp/batch-table-$TABLE.txt"
> $FILE
for ROUTE in "${ROUTES[@]}"; do
echo "route add $ROUTE dev veth0 table $TABLE" >> $FILE
done
) &
done
wait
echo "start adding routes"
START_TIME=$(date +%s%3N)
for TABLE in "${TABLES[@]}"; do
ip -n $NS -6 -batch "./tmp/batch-table-$TABLE.txt" &
done
wait
END_TIME=$(date +%s%3N)
ELAPSED_TIME=$((END_TIME - START_TIME))
echo "added $((${#ROUTES[@]} * ${#TABLES[@]})) routes (${#ROUTES[@]} routes * ${#TABLES[@]} tables)."
echo "total routes: $(ip -n $NS -6 route show table all | wc -l)" # Just for debug
echo "Time elapsed: ${ELAPSED_TIME} milliseconds."
ip netns del $NS
rm -fr ./tmp/
v2: https://lore.kernel.org/netdev/20250409011243.26195-1-kuniyu@amazon.com/
v1: https://lore.kernel.org/netdev/20250321040131.21057-1-kuniyu@amazon.com/
====================
Link: https://patch.msgid.link/20250418000443.43734-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now we are ready to remove RTNL from SIOCADDRT and RTM_NEWROUTE.
The remaining things to do are
1. pass false to lwtunnel_valid_encap_type_attr()
2. use rcu_dereference_rtnl() in fib6_check_nexthop()
3. place rcu_read_lock() before ip6_route_info_create_nh().
Let's complete the RTNL-free conversion.
When each CPU-X adds 100000 routes on table-X in a batch
concurrently on c7a.metal-48xl EC2 instance with 192 CPUs,
without this series:
$ sudo ./route_test.sh
...
added 19200000 routes (100000 routes * 192 tables).
time elapsed: 191577 milliseconds.
with this series:
$ sudo ./route_test.sh
...
added 19200000 routes (100000 routes * 192 tables).
time elapsed: 62854 milliseconds.
I changed the number of routes in each table (1000 ~ 100000)
and consistently saw it finish 3x faster with this series.
Note that now every caller of lwtunnel_valid_encap_type() passes
false as the last argument, and this can be removed later.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250418000443.43734-16-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We will get rid of RTNL from RTM_NEWROUTE and SIOCADDRT.
Then, we may be going to add a route tied to a dying nexthop.
The nexthop itself is not freed during the RCU grace period, but
if we link a route after __remove_nexthop_fib() is called for the
nexthop, the route will be leaked.
To avoid the race between IPv6 route addition under RCU vs nexthop
deletion under RTNL, let's add a dead flag and protect it and
nh->f6i_list with a spinlock.
__remove_nexthop_fib() acquires the nexthop's spinlock and sets false
to nh->dead, then calls ip6_del_rt() for the linked route one by one
without the spinlock because fib6_purge_rt() acquires it later.
While adding an IPv6 route, fib6_add() acquires the nexthop lock and
checks the dead flag just before inserting the route.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250418000443.43734-15-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The next patch adds per-nexthop spinlock which protects nh->f6i_list.
When rt->nh is not NULL, fib6_add_rt2node() will be called under the lock.
fib6_add_rt2node() could call fib6_purge_rt() for another route, which
could holds another nexthop lock.
Then, deadlock could happen between two nexthops.
Let's defer fib6_purge_rt() after fib6_add_rt2node().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20250418000443.43734-14-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We will get rid of RTNL from RTM_NEWROUTE and SIOCADDRT.
If the request specifies a new table ID, fib6_new_table() is
called to create a new routing table.
Two concurrent requests could specify the same table ID, so we
need a lock to protect net->ipv6.fib_table_hash[h].
Let's add a spinlock to protect the hash bucket linkage.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20250418000443.43734-13-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We will get rid of RTNL from RTM_NEWROUTE and SIOCADDRT and rely
on RCU to guarantee dev and nexthop lifetime.
Then, the RCU section will start before ip6_route_info_create_nh()
in ip6_route_multipath_add(), but ip6_route_info_create() is called
in the same loop and will sleep.
Let's split the loop into ip6_route_mpath_info_create() and
ip6_route_mpath_info_create_nh().
Note that ip6_route_info_append() is now integrated into
ip6_route_mpath_info_create_nh() because we need to call different
free functions for nexthops that passed ip6_route_info_create_nh().
In case of failure, the remaining nexthops that ip6_route_info_create_nh()
has not been called for will be freed by ip6_route_mpath_info_cleanup().
OTOH, if a nexthop passes ip6_route_info_create_nh(), it will be linked
to a local temporary list, which will be spliced back to rt6_nh_list.
In case of failure, these nexthops will be released by fib6_info_release()
in ip6_route_multipath_add().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250418000443.43734-12-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ip6_route_info_create_nh() will be called under RCU.
It calls fib_nh_common_init() and allocates nhc->nhc_pcpu_rth_output.
As with the reason for rt->fib6_nh->rt6i_pcpu, we want to avoid
GFP_ATOMIC allocation for nhc->nhc_pcpu_rth_output under RCU.
Let's preallocate it in ip6_route_info_create().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250418000443.43734-9-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ip6_route_info_create_nh() will be called under RCU.
Then, fib6_nh_init() is also under RCU, but per-cpu memory allocation
is very likely to fail with GFP_ATOMIC while bulk-adding IPv6 routes
and we would see a bunch of this message in dmesg.
percpu: allocation failed, size=8 align=8 atomic=1, atomic alloc failed, no space left
percpu: allocation failed, size=8 align=8 atomic=1, atomic alloc failed, no space left
Let's preallocate rt->fib6_nh->rt6i_pcpu in ip6_route_info_create().
If something fails before the original memory allocation in
fib6_nh_init(), ip6_route_info_create_nh() calls fib6_info_release(),
which releases the preallocated per-cpu memory.
Note that rt->fib6_nh->rt6i_pcpu is not preallocated when called via
ipv6_stub, so we still need alloc_percpu_gfp() in fib6_nh_init().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250418000443.43734-8-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We will get rid of RTNL from RTM_NEWROUTE and SIOCADDRT and rely
on RCU to guarantee dev and nexthop lifetime.
Then, we want to allocate as much as possible before entering
the RCU section.
The RCU section will start in the middle of ip6_route_info_create(),
and this is problematic for ip6_route_multipath_add() that calls
ip6_route_info_create() multiple times.
Let's split ip6_route_info_create() into two parts; one for memory
allocation and another for nexthop setup.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20250418000443.43734-7-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We will get rid of RTNL from RTM_NEWROUTE and SIOCADDRT.
Then, we must perform two lookups for nexthop and dev under RCU
to guarantee their lifetime.
ip6_route_info_create() calls nexthop_find_by_id() first if
RTA_NH_ID is specified, and then allocates struct fib6_info.
nexthop_find_by_id() must be called under RCU, but we do not want
to use GFP_ATOMIC for memory allocation here, which will be likely
to fail in ip6_route_multipath_add().
Let's move nexthop_find_by_id() after the memory allocation so
that we can later split ip6_route_info_create() into two parts:
the sleepable part and the RCU part.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20250418000443.43734-6-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In ip6_route_multipath_add(), we call rt6_qualify_for_ecmp() for each
entry. If it returns false, the request fails.
rt6_qualify_for_ecmp() returns false if either of the conditions below
is true:
1. f6i->fib6_flags has RTF_ADDRCONF
2. f6i->nh is not NULL
3. f6i->fib6_nh->fib_nh_gw_family is AF_UNSPEC
1 is unnecessary because rtm_to_fib6_config() never sets RTF_ADDRCONF
to cfg->fc_flags.
2. is equivalent with cfg->fc_nh_id.
3. can be replaced by checking RTF_GATEWAY in the base and each multipath
entry because AF_INET6 is set to f6i->fib6_nh->fib_nh_gw_family only when
cfg.fc_is_fdb is true or RTF_GATEWAY is set, but the former is always
false.
These checks do not require RCU and can be done earlier.
Let's perform the equivalent checks in rtm_to_fib6_multipath_config().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250418000443.43734-5-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ip6_route_info_create() is called from 3 functions:
* ip6_route_add()
* ip6_route_multipath_add()
* addrconf_f6i_alloc()
addrconf_f6i_alloc() does not need validation for struct fib6_config in
ip6_route_info_create().
ip6_route_multipath_add() calls ip6_route_info_create() for multiple
routes with slightly different fib6_config instances, which is copied
from the base config passed from userspace. So, we need not validate
the same config repeatedly.
Let's move such validation into rtm_to_fib6_config().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20250418000443.43734-4-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Basically, removing an IPv6 route does not require RTNL because
the IPv6 routing tables are protected by per table lock.
inet6_rtm_delroute() calls nexthop_find_by_id() to check if the
nexthop specified by RTA_NH_ID exists. nexthop uses rbtree and
the top-down walk can be safely performed under RCU.
ip6_route_del() already relies on RCU and the table lock, but we
need to extend the RCU critical section a bit more to cover
__ip6_del_rt(). For example, nexthop_for_each_fib6_nh() and
inet6_rt_notify() needs RCU.
Let's call nexthop_find_by_id() and __ip6_del_rt() under RCU and
get rid of RTNL from inet6_rtm_delroute() and SIOCDELRT.
Even if the nexthop is removed after rcu_read_unlock() in
inet6_rtm_delroute(), __remove_nexthop_fib() cleans up the routes
tied to the nexthop, and ip6_route_del() returns -ESRCH. So the
request was at least valid as of nexthop_find_by_id(), and it's just
a matter of timing.
Note that we need to pass false to lwtunnel_valid_encap_type_attr().
The following patches also use the newroute bool.
Note also that fib6_get_table() does not require RCU because once
allocated fib6_table is not freed until netns dismantle. I will
post a follow-up series to convert such callers to RCU-lockless
version. [0]
Link: https://lore.kernel.org/netdev/20250417174557.65721-1-kuniyu@amazon.com/ #[0]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250418000443.43734-3-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We will perform RTM_NEWROUTE and RTM_DELROUTE under RCU, and then
we want to perform some validation out of the RCU scope.
When creating / removing an IPv6 route with RTA_MULTIPATH,
inet6_rtm_newroute() / inet6_rtm_delroute() validates RTA_GATEWAY
in each multipath entry.
Let's do that in rtm_to_fib6_config().
Note that now RTM_DELROUTE returns an error for RTA_MULTIPATH with
0 entries, which was accepted but should result in -EINVAL as
RTM_NEWROUTE.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250418000443.43734-2-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Make the wait_context a full part of the q_info struct rather
than a stack variable that goes away after pdsc_adminq_post()
is done so that the context is still available after the wait
loop has given up.
There was a case where a slow development firmware caused
the adminq request to time out, but then later the FW finally
finished the request and sent the interrupt. The handler tried
to complete_all() the completion context that had been created
on the stack in pdsc_adminq_post() but no longer existed.
This caused bad pointer usage, kernel crashes, and much wailing
and gnashing of teeth.
Fixes: 01ba61b55b ("pds_core: Add adminq processing and commands")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250421174606.3892-5-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the pds_core driver was first created there were some race
conditions around using the adminq, especially for client drivers.
To reduce the possibility of a race condition there's a check
against pf->state in pds_client_adminq_cmd(). This is problematic
for a couple of reasons:
1. The PDSC_S_INITING_DRIVER bit is set during probe, but not
cleared until after everything in probe is complete, which
includes creating the auxiliary devices. For pds_fwctl this
means it can't make any adminq commands until after pds_core's
probe is complete even though the adminq is fully up by the
time pds_fwctl's auxiliary device is created.
2. The race conditions around using the adminq have been fixed
and this path is already protected against client drivers
calling pds_client_adminq_cmd() if the adminq isn't ready,
i.e. see pdsc_adminq_post() -> pdsc_adminq_inc_if_up().
Fix this by removing the pf->state check in pds_client_adminq_cmd()
because invalid accesses to pds_core's adminq is already handled by
pdsc_adminq_post()->pdsc_adminq_inc_if_up().
Fixes: 10659034c6 ("pds_core: add the aux client API")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250421174606.3892-4-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the FW doesn't support the PDS_CORE_CMD_FW_CONTROL command
the driver might at the least print garbage and at the worst
crash when the user runs the "devlink dev info" devlink command.
This happens because the stack variable fw_list is not 0
initialized which results in fw_list.num_fw_slots being a
garbage value from the stack. Then the driver tries to access
fw_list.fw_names[i] with i >= ARRAY_SIZE and runs off the end
of the array.
Fix this by initializing the fw_list and by not failing
completely if the devcmd fails because other useful information
is printed via devlink dev info even if the devcmd fails.
Fixes: 45d76f4929 ("pds_core: set up device and adminq")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250421174606.3892-3-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The pds_core's adminq is protected by the adminq_lock, which prevents
more than 1 command to be posted onto it at any one time. This makes it
so the client drivers cannot simultaneously post adminq commands.
However, the completions happen in a different context, which means
multiple adminq commands can be posted sequentially and all waiting
on completion.
On the FW side, the backing adminq request queue is only 16 entries
long and the retry mechanism and/or overflow/stuck prevention is
lacking. This can cause the adminq to get stuck, so commands are no
longer processed and completions are no longer sent by the FW.
As an initial fix, prevent more than 16 outstanding adminq commands so
there's no way to cause the adminq from getting stuck. This works
because the backing adminq request queue will never have more than 16
pending adminq commands, so it will never overflow. This is done by
reducing the adminq depth to 16.
Fixes: 45d76f4929 ("pds_core: set up device and adminq")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250421174606.3892-2-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mark Bloch says:
====================
net/mlx5: HWS, Improve IP version handling
This small series hardens our checks against a single matcher containing
rules that match on IPv4 and IPv6. This scenario is not supported by
hardware steering and the implementation now signals this instead of
failing silently.
Patches:
* Patch 1 forbids a single definer to match on mixed IP versions for
source and destination address.
* Patch 2 reproduces a couple of firmware checks: it forbids creating
a definer that matches on IP address without matching on IP version,
and also disallows matching on IPv6 addresses and the IPv4 IHL fields
in the same definer.
* Patch 3 forbids mixing rules that match on IPv4 and IPv6 addresses in
the same matcher. The underlying definer mechanism does not support
that.
====================
Link: https://patch.msgid.link/20250422092540.182091-1-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signal clearly to the user, via an error, that mixing IPv4 and IPv6
rules in the same matcher is not supported. Previously such cases
silently failed by adding a rule that did not work correctly.
Rules can specify an IP version by one of two fields: IP version or
ethertype. At matcher creation, store whether the template matches on
any of these two fields. If yes, inspect each rule for its corresponding
match value and store the IP version inside the matcher to guard against
inconsistencies with subsequent rules.
Furthermore, also check rules for internal consistency, i.e. verify that
the ethertype and IP version match values do not contradict each other.
The logic applies to inner and outer headers independently, to account
for tunneling.
Rules that do not match on IP addresses are not affected.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250422092540.182091-4-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replicate some sanity checks that firmware does, since hardware steering
does not go through firmware.
When creating a definer, disallow matching on IP addresses without also
matching on IP version. The latter can be satisfied by matching either
on the version field in the IP header, or on the ethertype field.
Also refuse to match IPv4 IHL alongside IPv6.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250422092540.182091-3-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Unify the check for IP version when creating a definer. A given matcher
is deemed to match on IPv6 if any of the higher order (>31) bits of
source or destination address mask are set.
A single packet cannot mix IP versions between source and destination
addresses, so it makes no sense that they would be decided on
independently.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250422092540.182091-2-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MT7531 standalone and MMIO variants found in MT7988 and EN7581 share
most basic properties. Despite that, assisted_learning_on_cpu_port and
mtu_enforcement_ingress were only applied for MT7531 but not for MT7988
or EN7581, causing the expected issues on MMIO devices.
Apply both settings equally also for MT7988 and EN7581 by moving both
assignments form mt7531_setup() to mt7531_setup_common().
This fixes unwanted flooding of packets due to unknown unicast
during DA lookup, as well as issues with heterogenous MTU settings.
Fixes: 7f54cc9772 ("net: dsa: mt7530: split-off common parts from mt7531_setup")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Chester A. Unal <chester.a.unal@arinc9.com>
Link: https://patch.msgid.link/89ed7ec6d4fa0395ac53ad2809742bb1ce61ed12.1745290867.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
