smatch reports the warning below:
drivers/infiniband/core/uverbs_std_types_counters.c:110
ib_uverbs_handler_UVERBS_METHOD_COUNTERS_READ() error: 'uattr'
dereferencing possible ERR_PTR()
The return value of uattr maybe ERR_PTR(-ENOENT), fix this by checking
the value of uattr before using it.
Fixes: ebb6796bd3 ("IB/uverbs: Add read counters support")
Signed-off-by: Xiang Yang <xiangyang3@huawei.com>
Link: https://lore.kernel.org/r/20230804022525.1916766-1-xiangyang3@huawei.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Currently, direct wqe is not supported for wr-list. RoCE driver excludes
direct wqe for wr-list by judging whether the number of wr is 1.
For a wr-list where the second wr is a length-error atomic wr, the
post-send driver handles the first wr and adds 1 to the wr number counter
firstly. While handling the second wr, the driver finds out a length error
and terminates the wr handle process, remaining the counter at 1. This
causes the driver mistakenly judges there is only 1 wr and thus enters
the direct wqe process, carrying the current length-error atomic wqe.
This patch fixes the error by adding a judgement whether the current wr
is a bad wr. If so, use the normal doorbell process but not direct wqe
despite the wr number is 1.
Fixes: 01584a5edc ("RDMA/hns: Add support of direct wqe")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20230804012711.808069-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
One-element and zero-length arrays are deprecated. So, replace
one-element array in struct irdma_qvlist_info with flexible-array
member.
A patch for this was sent a while ago[1]. However, it seems that, at
the time, the changes were partially folded[2][3], and the actual
flexible-array transformation was omitted. This patch fixes that.
The only binary difference seen before/after changes is shown below:
| drivers/infiniband/hw/irdma/hw.o
| @@ -868,7 +868,7 @@
| drivers/infiniband/hw/irdma/hw.c:484 (discriminator 2)
| size += struct_size(iw_qvlist, qv_info, rf->msix_count);
| 55b: imul $0x45c,%rdi,%rdi
|- 562: add $0x10,%rdi
|+ 562: add $0x4,%rdi
which is, of course, expected as it reflects the mistake made
while folding the patch I've mentioned above.
Worth mentioning is the fact that with this change we save 12 bytes
of memory, as can be inferred from the diff snapshot above. Notice
that:
$ pahole -C rdma_qv_info idrivers/infiniband/hw/irdma/hw.o
struct irdma_qv_info {
u32 v_idx; /* 0 4 */
u16 ceq_idx; /* 4 2 */
u16 aeq_idx; /* 6 2 */
u8 itr_idx; /* 8 1 */
/* size: 12, cachelines: 1, members: 4 */
/* padding: 3 */
/* last cacheline: 12 bytes */
};
Link: https://lore.kernel.org/linux-hardening/20210525230038.GA175516@embeddedor/ [1]
Link: https://lore.kernel.org/linux-hardening/bf46b428deef4e9e89b0ea1704b1f0e5@intel.com/ [2]
Link: https://lore.kernel.org/linux-rdma/20210520143809.819-1-shiraz.saleem@intel.com/T/#u [3]
Fixes: 44d9e52977 ("RDMA/irdma: Implement device initialization definitions")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/ZMpsQrZadBaJGkt4@work
Signed-off-by: Leon Romanovsky <leon@kernel.org>
If a send packet is dropped by the IP layer in rxe_requester()
the call to rxe_xmit_packet() can fail with err == -EAGAIN.
To recover, the state of the wqe is restored to the state before
the packet was sent so it can be resent. However, the routines
that save and restore the state miss a significnt part of the
variable state in the wqe, the dma struct which is used to process
through the sge table. And, the state is not saved before the packet
is built which modifies the dma struct.
Under heavy stress testing with many QPs on a fast node sending
large messages to a slow node dropped packets are observed and
the resent packets are corrupted because the dma struct was not
restored. This patch fixes this behavior and allows the test cases
to succeed.
Fixes: 3050b99850 ("IB/rxe: Fix race condition between requester and completer")
Link: https://lore.kernel.org/r/20230721200748.4604-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This patch corrects an error in rxe_modify_srq where if the
caller changes the srq size the actual new value is not returned
to the caller since it may be larger than what is requested.
Additionally it open codes the subroutine rcv_wqe_size() which
adds very little value, and makes some whitespace changes.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20230620140142.9452-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This patch:
- Moves code to initialize a qp send work queue to a
subroutine named rxe_init_sq.
- Moves code to initialize a qp recv work queue to a
subroutine named rxe_init_rq.
- Moves initialization of qp request and response packet
queues ahead of work queue initialization so that cleanup
of a qp if it is not fully completed can successfully
attempt to drain the packet queues without a seg fault.
- Makes minor whitespace cleanups.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20230620135519.9365-2-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently the attribute cap.max_send_wr and cap.max_recv_wr
sent from user-space during create QP are the provider computed
SQ/RQ depth as opposed to raw values passed from application.
This inhibits computation of an accurate value for max_send_wr
and max_recv_wr for this QP in the kernel which matches the value
returned in user create QP. Also these capabilities needs to be
reported from the driver in query QP.
Add support by extending the ABI to allow the raw cap.max_send_wr and
cap.max_recv_wr to be passed from user-space, while keeping compatibility
for the older scheme.
The internal HW depth and shift needed for the WQs needs to be computed
now for both kernel and user-mode QPs. Add new helpers to assist with this:
irdma_uk_calc_depth_shift_sq, irdma_uk_calc_depth_shift_rq and
irdma_uk_calc_depth_shift_wq.
Consolidate all the user mode QP setup into a new function
irdma_setup_umode_qp which keeps it with its counterpart
irdma_setup_kmode_qp.
Signed-off-by: Youvaraj Sagar <youvaraj.sagar@intel.com>
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230725155525.1081-2-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Previously, there was no way to query the number of lanes for a network
card, so the same netdev_speed would result in a fixed pair of width and
speed. As network card specifications become more diverse, such fixed
mode is no longer suitable, so a method is needed to obtain the correct
width and speed based on the number of lanes.
This patch retrieves netdev lanes and speed from net_device and
translates them to IB width and speed.
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20230721092052.2090449-1-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add a CQ table based loookup to allow quick search
for CQ pointer having CQ ID in case of CQ related
asynchrononous event. The table is implemented in a
similar fashion to QP table.
Also add a reference counters for CQ. This is to prevent
destroying CQ while an asynchronous event is being processed.
The memory resource table size is sized higher with this update,
and this table doesn't need to be physically contiguous, so use
a vzalloc vs kzalloc to allocate the table.
Signed-off-by: Krzysztof Czurylo <krzysztof.czurylo@intel.com>
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230725155505.1069-4-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
User applications alert the driver when the Doorbell FIFO
reaches the alarm threshold. The driver updates the pacing
parameters in the shared page to do the maximum pacing
by the application till the DB FIFO congestion reduces to
pacing threshold. Driver keeps checking the DB FIFO depth
at the pacing interval and gradually adjusts the pacing level.
Once the pacing level reaches default values (no congestion in
the FIFO) pacing gets completed.
Link: https://lore.kernel.org/r/1689742977-9128-7-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
