Fix the following kconfig warning reported by the kernel test robot:
kismet: WARNING: unmet direct dependencies detected for
SND_SOC_ACPI_AMD_SDCA_QUIRKS when selected by SND_SOC_ACPI_AMD_MATCH
Depends on [n]: SOUND [=y] && SND [=y] && SND_SOC [=y] &&
ACPI [=y] && SND_SOC_SDCA [=n]
Selected by [y]:
- SND_SOC_ACPI_AMD_MATCH [=y] && SOUND [=y] && SND [=y] &&
SND_SOC [=y]
The issue occurs because SND_SOC_ACPI_AMD_SDCA_QUIRKS depends on
SND_SOC_SDCA, which may be disabled, causing unmet dependency warnings.
Fix this by adjusting the Kconfig dependency logic accordingly.
Fixes: e7c30ac379 ("ASoC: amd: acp: soc-acpi: add is_device_rt712_vb() helper")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202601131155.RXGj4KHv-lkp@intel.com
Signed-off-by: Syed Saba Kareem <syed.sabakareem@amd.com>
Link: https://patch.msgid.link/20260123095524.490655-1-syed.sabakareem@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SDCA class driver currently expects the device will be fully powered
down on system suspend but not on runtime suspend. This is typically
required as when audio is not active (ie. runtime suspend) jack detect
is expected to still function, but when the whole system is hibernated
there is no need to recognise audio jack events. This means the class
driver needs to always be informed of a system suspend, so the direct
complete optimisation (where PM will skip calling system suspend if the
device is runtime suspended) is not appropriate for the SDCA class
driver.
Add the NO_DIRECT_COMPLETE flag to prevent this optimisation from
running against this driver.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
link: ec0e6c6911/drivers/soundwire/intel_auxdevice.c (L568)
Link: https://patch.msgid.link/20260115131727.373738-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
On new Dell models the driver must read a UEFI variable to get a
variant identifier for the audio hardware. Without this, the driver
cannot know which firmware file to load to the amps.
Add Kconfig symbol CONFIG_SND_SOC_CS_AMP_LIB_TEST_HOOKS to enable
calling into functions that would normally abort because of missing
EFI functionality. Before this the code paths were only enabled if
the KUnit test for cs-amp-lib was enabled.
This change allows KUnit tests for clients of cs-amp-lib to install
redirection hooks in cs-amp-lib.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260121132243.1256019-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adds test cases for getting a Dell SSIDExV2 string by calling
cs_amp_devm_get_vendor_specific_variant_id().
This is a fairly simple test harness, the redirected call to
cs_amp_get_efi_variable() returns a test string to simulate
reading a string from UEFI. The returned string should be
the second field in the SSIDExV2 string (if valid).
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260121132243.1256019-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If cs_amp_devm_get_vendor_specific_variant_id() returns a string, use it
as part of the firmware filename. If this firmware isn't found, fall back
to the standard firmware name.
This re-uses the fwf_suffix fallback mechanism that was introduced in
commit e5d5b3aebd ("ASoC: cs35l56: Use SoundWire address as alternate
firmware suffix on L56 B0").
This is for handling vendors that use the same PCI SSID on systems with
various audio hardware and have a custom vendor-specific way to identify
the hardware variant.
This is currently used on Dell laptops. Dell create a UEFI variable that
indicates varations to the base hardware. This variance can be any part
of the hardware (not necessarily affecting the audio). It would be
impractical to publish many aliases for the same firmware files to match
every possible variance to that base hardware. Hence the fallback to the
standard firmware name. This allows alternate firmware files to be
published only for variants that need it. For all other variants the
fallback will load the firmware for the base SSID.
This is not done for CS35L56 B0 because the fallback mechanism is already
used for a different purpose for these parts. None of the products with
the older L56 B0 silicon revision need the additional vendor-specific
descriptor.
For SoundWire the resulting firmware searches with a variant descriptor
will be:
1. cs35l??-dsp1-misc-SSID-VARIANT-l?u?.wmfw
2. cs35l??-dsp1-misc-SSID-VARIANT.wmfw
3. cs35l??-dsp1-misc-SSID-VARIANT-l?u?.bin
4. cs35l??-dsp1-misc-SSID-VARIANT.bin
If this doesn't find a wmfw and bin file it will then fallback to:
5. cs35l??-dsp1-misc-SSID-l?u?.wmfw
6. cs35l??-dsp1-misc-SSID.wmfw
7. cs35l??-dsp1-misc-SSID-l?u?.bin
8. cs35l??-dsp1-misc-SSID.bin
With the typical published firmware names and qualifiers (a single wmfw but
amp-specific bin file) this will load either:
cs35l??-dsp1-misc-SSID-VARIANT.wmfw
and cs35l??-dsp1-misc-SSID-VARIANT-l?u?.bin
or
cs35l??-dsp1-misc-SSID.wmfw
and cs35l??-dsp1-misc-SSID-l?u?.bin
For non-Soundwire (I2S/TDM) systems the searches and fallbacks are
as above except that the "l?u?" component of the name is instead the
ALSA name prefix, usually of the form "AMPn".
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260121132243.1256019-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a function cs_amp_devm_get_vendor_specific_variant_id() to return
a vendor-specific hardware identifier string (if there is one) and use
it to fetch an identifier from Dell SSIDExV2 UEFI variable content.
Dell use the same PCI SSID on multiple products that might have different
audio hardware and thus need different firmware for the amplifier DSP.
The SSIDExV2 string contains additional system identifiers, and the
second field is a 2-character audio hardware identifier.
There are older Dell models with Cirrus Logic amplifiers that have the
SSIDExV2 UEFI variable but do not have the 2-character audio ID in the
second field. The SSIDExV2 is ignored if the second field is not
2 characters.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260121132243.1256019-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
When rt722 work with other amps, the rt722 amp endpoint is aggregated.
Set .aggregated = 1 to represent the fact and avoid unexpected issue.
Merge series from Binbin Zhou <zhoubinbin@loongson.cn>:
This patchset replaces the original magic numbers with register bit
field macro definitions in an attempt to improve code readability.
In addition, DAPM for capture ADC and chip power has been enabled.
The code in rz_ssi_stream_is_play() checks whether substream->stream is
different from SNDRV_PCM_STREAM_PLAYBACK and returns the capture
struct rz_ssi_stream in that case. The logic is easier to follow if
substream->stream is compared directly against SNDRV_PCM_STREAM_CAPTURE
and return the capture struct rz_ssi_stream.
Use the conditional operator to simplify the code.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20260119195252.3362486-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull landlock fixes from Mickaël Salaün:
"This fixes TCP handling, tests, documentation, non-audit elided code,
and minor cosmetic changes"
* tag 'landlock-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Clarify documentation for the IOCTL access right
selftests/landlock: Properly close a file descriptor
landlock: Improve the comment for domain_is_scoped
selftests/landlock: Use scoped_base_variants.h for ptrace_test
selftests/landlock: Fix missing semicolon
selftests/landlock: Fix typo in fs_test
landlock: Optimize stack usage when !CONFIG_AUDIT
landlock: Fix spelling
landlock: Clean up hook_ptrace_access_check()
landlock: Improve erratum documentation
landlock: Remove useless include
landlock: Fix wrong type usage
selftests/landlock: NULL-terminate unix pathname addresses
selftests/landlock: Remove invalid unix socket bind()
selftests/landlock: Add missing connect(minimal AF_UNSPEC) test
selftests/landlock: Fix TCP bind(AF_UNSPEC) test case
landlock: Fix TCP handling of short AF_UNSPEC addresses
landlock: Fix formatting
Pull cgroup fixes from Tejun Heo:
- Add Chen Ridong as cpuset reviewer
- Add SPDX license identifiers to cgroup files that were missing them
* tag 'cgroup-for-6.19-rc5-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
kernel: cgroup: Add LGPL-2.1 SPDX license ID to legacy_freezer.c
kernel: cgroup: Add SPDX-License-Identifier lines
MAINTAINERS: Add Chen Ridong as cpuset reviewer
Pull ext4 fixes from Ted Ts'o:
- Fix an inconsistency in structure size on 32-bit platforms caused by
padding differences for the new EXT4_IOC_[GS]ET_TUNE_SB_PARAM ioctls
- Fix a buffer leak on the error path when dropping the refcount an
xattr value stored in an inode
- Fix missing locking on the error path for the file defragmentation
ioctl leading to a BUG
* tag 'ext4_for_linus-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix iloc.bh leak in ext4_xattr_inode_update_ref
ext4: add missing down_write_data_sem in mext_move_extent().
ext4: fix ext4_tune_sb_params padding
Pull phy fixes from Vinod Koul:
"A bunch of driver fixes:
- Freescale typec orientation switch fix, clearing register fix,
assertion of phy reset during power on
- Qualcomm pcs register clear before using
- stm one off fix
- TI runtimepm error handling, regmap leak fixes
- Rockchip gadget mode disconnection and disruption fixes
- Tegra register level fix
- Broadcom pointer cast warning fix"
* tag 'phy-fixes-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: freescale: imx8m-pcie: assert phy reset during power on
phy: rockchip: inno-usb2: Fix a double free bug in rockchip_usb2phy_probe()
phy: broadcom: ns-usb3: Fix Wvoid-pointer-to-enum-cast warning (again)
phy: tegra: xusb: Explicitly configure HS_DISCON_LEVEL to 0x7
phy: rockchip: inno-usb2: fix communication disruption in gadget mode
phy: rockchip: inno-usb2: fix disconnection in gadget mode
phy: ti: gmii-sel: fix regmap leak on probe failure
phy: sparx5-serdes: make it selectable for ARCH_LAN969X
phy: ti: da8xx-usb: Handle devm_pm_runtime_enable() errors
phy: stm32-usphyc: Fix off by one in probe()
phy: qcom-qusb2: Fix NULL pointer dereference on early suspend
phy: fsl-imx8mq-usb: Clear the PCS_TX_SWING_FULL field before using it
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings for qcs8300
phy: fsl-imx8mq-usb: fix typec orientation switch when built as module
Pull soundwire fix from Vinod Koul:
- Single off-by-one fix for allocating slave id
* tag 'soundwire-6.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: bus: fix off-by-one when allocating slave IDs
Pull USB fixes from Greg KH:
"Here are some small USB fixes and new device ids for 6.19-rc6
Included in here are:
- new usb-serial device ids
- dwc3-apple driver fixes to get things working properly on that
hardware platform
- ohci/uhci platfrom driver module soft-deps with ehci to remove a
runtime warning that sometimes shows up on some platforms.
- quirk for broken devices that can not handle reading the BOS
descriptor from them without going crazy.
- usb-serial driver fixes
- xhci driver fixes
- usb gadget driver fixes
All of these except for the last xhci fix has been in linux-next for a
while. The xhci fix has been reported by others to solve the issue for
them, so should be ok"
* tag 'usb-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: sideband: don't dereference freed ring when removing sideband endpoint
usb: gadget: uvc: retry vb2_reqbufs() with vb_vmalloc_memops if use_sg fail
usb: gadget: uvc: return error from uvcg_queue_init()
usb: gadget: uvc: fix interval_duration calculation
usb: gadget: uvc: fix req_payload_size calculation
usb: dwc3: apple: Ignore USB role switches to the active role
usb: host: xhci-tegra: Use platform_get_irq_optional() for wake IRQs
USB: OHCI/UHCI: Add soft dependencies on ehci_platform
usb: dwc3: apple: Set USB2 PHY mode before dwc3 init
USB: serial: f81232: fix incomplete serial port generation
USB: serial: ftdi_sio: add support for PICAXE AXE027 cable
USB: serial: option: add Telit LE910 MBIM composition
usb: core: add USB_QUIRK_NO_BOS for devices that hang on BOS descriptor
dt-bindings: usb: qcom,dwc3: Correct MSM8994 interrupts
dt-bindings: usb: qcom,dwc3: Correct IPQ5018 interrupts
tcpm: allow looking for role_sw device in the main node
usb: dwc3: Check for USB4 IP_NAME
Pull EDAC fixes from Borislav Petkov:
"Make sure the memory-mapped memory controller registers BAR gets
unmapped when the driver memory allocation fails
Fix that in both x38 and i3200 EDAC drivers as former has copied the
bug from the latter, it looks like"
* tag 'edac_urgent_for_v6.19_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/x38: Fix a resource leak in x38_probe1()
EDAC/i3200: Fix a resource leak in i3200_probe1()
Pull misc x86 fixes from Ingo Molnar:
- Fix resctrl initialization on Hygon CPUs
- Fix resctrl memory bandwidth counters on Hygon CPUs
- Fix x86 self-tests build bug
* tag 'x86-urgent-2026-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/x86: Add selftests include path for kselftest.h after centralization
x86/resctrl: Fix memory bandwidth counter width for Hygon
x86/resctrl: Add missing resctrl initialization for Hygon
Pull timer fix from Ingo Molnar:
"Fix the update_needs_ipi() check in the hrtimer code that may result
in incorrect skipping of hrtimer IPIs"
* tag 'timers-urgent-2026-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimer: Fix softirq base check in update_needs_ipi()
Pull scheduler fixes from Ingo Molnar:
"Misc deadline scheduler fixes, mainly for a new category of bugs that
were discovered and fixed recently:
- Fix a race condition in the DL server
- Fix a DL server bug which can result in incorrectly going idle when
there's work available
- Fix DL server bug which triggers a WARN() due to broken
get_prio_dl() logic and subsequent misbehavior
- Fix double update_rq_clock() calls
- Fix setscheduler() assumption about static priorities
- Make sure balancing callbacks are always called
- Plus a handful of preparatory commits for the fixes"
* tag 'sched-urgent-2026-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Use ENQUEUE_MOVE to allow priority change
sched: Deadline has dynamic priority
sched: Audit MOVE vs balance_callbacks
sched: Fold rq-pin swizzle into __balance_callbacks()
sched/deadline: Avoid double update_rq_clock()
sched/deadline: Ensure get_prio_dl() is up-to-date
sched/deadline: Fix server stopping with runnable tasks
sched: Provide idle_rq() helper
sched/deadline: Fix potential race in dl_add_task_root_domain()
sched/deadline: Remove unnecessary comment in dl_add_task_root_domain()
Pull objtool fixes from Ingo Molnar:
"Fix two objtool build failures that trigger in uncommon build
environments"
* tag 'objtool-urgent-2026-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: fix build failure due to missing libopcodes check
objtool: fix compilation failure with the x32 toolchain
