This error message is only applicable for platforms using
GuC submission - to warn the user if the GuC they are using
or the platform they are running doesn't have this information
to provide to userspace about the platform. When forcing
execlist submission, which is something only used for debug,
the user is running at their own risk and should understand
the limitations of running without GuC.
v2 (John/Lucas): Don't print an info message with execlists
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Jagmeet Randhawa <jagmeet.randhawa@intel.com>
Link: https://lore.kernel.org/r/20250328154236.9216-1-stuart.summers@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The error capture list in the ADS is initially allocated using a
placeholder size. When the actual size is determinied later on, there
is a debug print about the new size. However, the wording is such that
some people see it as an unexpected thing and therefore a potential
problem. So re-word it to be a little less concerning.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250325203211.3907890-1-John.C.Harrison@Intel.com
Building the xe driver for i386 results in a link time warning:
x86_64-linux-ld: drivers/gpu/drm/xe/xe_migrate.o: in function `xe_migrate_vram':
xe_migrate.c:(.text+0x1e15): undefined reference to `__udivdi3'
Avoid this by using DIV_U64_ROUND_UP() instead of DIV_ROUND_UP(). The driver
is unlikely to be used on 32=bit hardware, so the extra cost here is not
too important.
Fixes: 9c44fd5f6e ("drm/xe: Add migrate layer functions for SVM support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250324210612.2927194-1-arnd@kernel.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The dump on a dead CT tries to emulate the devcoredump formatting (it
would use devcoredump code directly but that requires more re-work to
happen - work in progress). So update the print of the dead CT reason
code to match the format of the 'reason' string that was added to the
actual devcoredump a little while ago.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250325203111.3907426-1-John.C.Harrison@Intel.com
According to pci core guidelines, pci_save_config is recommended when the
driver explicitly needs to set the pci power state. As of now xe kmd is
only doing pci_save_config while entering to s2idle/s3 state, which makes
pci core think that device driver has already applied required pci power
state. This leads to GPU remain in D0 state. To fix the issue setting
the pci power state to D3Cold.
Fixes:dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250327161914.432552-1-badal.nilawar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Sysfs_ops needs to be defined on all directories which
can have attr files with set/get method. Add sysfs_ops
to even those directories which is currently empty but
would have attr files with set/get method in future.
Leave .default with default sysfs_ops as it will never
have setter method.
V2(Himal/Rodrigo):
- use single sysfs_ops for all dir and attr with set/get
- add default ops as ./default does not need runtime pm at all
Fixes: 3f0e14651a ("drm/xe: Runtime PM wake on every sysfs call")
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250327122647.886637-1-tejas.upadhyay@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Change the scope of the migrate subsystem to be dev managed instead of
drm managed.
The parent pci struct &device, that the xe struct &drm_device is a part
of, gets removed when a hot unplug is triggered, which causes the
underlying iommu group to get destroyed as well.
The migrate subsystem, which handles the lifetime of the page-table tree
(pt) BO, doesn't get a chance to keep the BO back during the hot unplug,
as all the references to DRM haven't been put back.
When all the references to DRM are indeed put back later, the migrate
subsystem tries to put back the pt BO. Since the underlying iommu group
has been already destroyed, a kernel NULL ptr dereference takes place
while attempting to keep back the pt BO.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3914
Suggested-by: Thomas Hellstrom <thomas.hellstrom@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250326151929.1495972-1-aradhya.bhatia@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
On device unbind, migrate exported bos, including pagemap bos to
system. This allows importers to take proper action without
disruption. In particular, SVM clients on remote devices may
continue as if nothing happened, and can chose a different
placement.
The evict_flags() placement is chosen in such a way that bos that
aren't exported are purged.
For pinned bos, we unmap DMA, but their pages are not freed yet
since we can't be 100% sure they are not accessed.
All pinned external bos (not just the VRAM ones) are put on the
pinned.external list with this patch. But this only affects the
xe_bo_pci_dev_remove_pinned() function since !VRAM bos are
ignored by the suspend / resume functionality. As a follow-up we
could look at removing the suspend / resume iteration over
pinned external bos since we currently don't allow pinning
external bos in VRAM, and other external bos don't need any
special treatment at suspend / resume.
v2:
- Address review comments. (Matthew Auld).
v3:
- Don't introduce an external_evicted list (Matthew Auld)
- Add a discussion around suspend / resume behaviour to the
commit message.
- Formatting fixes.
v4:
- Move dma-unmaps of pinned kernel bos to a dev managed
callback to give subsystems using these bos a chance to
clean them up. (Matthew Auld)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250326080551.40201-4-thomas.hellstrom@linux.intel.com
Add PMU support for per-function engine activity stats.
per-function engine activity is enabled when VF's are enabled.
If 2 VF's are enabled, then the applicable function values are
0 - PF engine activity
1 - VF1 engine activity
2 - VF2 engine activity
This can be read from perf tool as shown below
./perf stat -e xe_<bdf>/engine-active-ticks,gt=0,engine_class=0,
engine_instance=0,function=1/ -I 1000
v2: fix documentation (Umesh)
remove global for functions (Lucas, Michal)
v3: fix commit message
move function_id checks to same place (Michal)
v4: fix comment (Umesh)
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250311071759.2117211-3-riana.tauro@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
WARNING: unmet direct dependencies detected for FB_IOMEM_HELPERS
Depends on [n]: HAS_IOMEM [=y] && FB_CORE [=n]
Selected by [m]:
- DRM_XE_DISPLAY [=y] && HAS_IOMEM [=y] && DRM [=m] && DRM_XE [=m] && DRM_XE [=m]=m [=m] && HAS_IOPORT [=y]
DRM_XE_DISPLAY requires FB_IOMEM_HELPERS, but the dependency FB_CORE is
missing, selecting FB_IOMEM_HELPERS if DRM_FBDEV_EMULATION is set as
other drm drivers.
Fixes: 44e694958b ("drm/xe/display: Implement display support")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250323114103.1960511-1-yuehaibing@huawei.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Allow to test if driver behaves correctly when xe_pcode_probe_early()
fails. Note that this is not sufficient for testing survivability mode
as it's still required to read the hw to check for errors, which doesn't
happen on an injected failure.
To complete the early probe coverage, allow injection in the other
functions as well: xe_mmio_probe_early() and xe_device_probe_early().
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250314-fix-survivability-v5-3-fdb3559ea965@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Commit d40f275d96 ("drm/xe: Move survivability entirely to xe_pci")
tried to follow the logic: initialize everything needed and if
everything succeeds, set the flag that it's enabled. While it fixed some
corner cases of those calls failing, it was wrong for setting the flag
after the call to xe_heci_gsc_init(): that function does a different
initialization for survivability mode.
Fix that and add comments about this being done on purpose.
Suggested-by: Riana Tauro <riana.tauro@intel.com>
Fixes: d40f275d96 ("drm/xe: Move survivability entirely to xe_pci")
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250314-fix-survivability-v5-2-fdb3559ea965@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Commit d40f275d96 ("drm/xe: Move survivability entirely to xe_pci")
moved the survivability handling to be done entirely in the xe_pci
layer. However there are some issues with that approach:
1) Survivability mode needs at least the mmio initialized, otherwise it
can't really read a register to decide if it should enter that state
2) SR-IOV mode should be initialized, otherwise it's not possible to
check if it's VF
Besides, as pointed by Riana the check for
xe_survivability_mode_enable() was wrong in xe_pci_probe() since it's
not a bool return.
Fix that by moving the initialization to be entirely in the xe_device
layer, with the correct dependencies handled: only after mmio and sriov
initialization, and not triggering it on error from
wait_for_lmem_ready(). This restores the trigger behavior before that
commit. The xe_pci layer now only checks for "is it enabled?",
like it's doing in xe_pci_suspend()/xe_pci_remove(), etc.
Cc: Riana Tauro <riana.tauro@intel.com>
Fixes: d40f275d96 ("drm/xe: Move survivability entirely to xe_pci")
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250314-fix-survivability-v5-1-fdb3559ea965@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Mediatek DRM Next for Linux 6.15
1. HDMI fixup and refinement
2. Move to devm_platform_ioremap_resource() usage
3. Add MT8188 dsc compatible
4. Fix config_updating flag never false when no mbox channel
5. dp: drm_err => dev_err in HPD path to avoid NULL ptr
6. Add dpi power-domains example
7. Add MT8365 SoC support
8. Fix error codes in mtk_dsi_host_transfer()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250312232909.9304-1-chunkuang.hu@kernel.org
Add a new entry in stats to for svm page faults. If CONFIG_DEBUG_FS is
enabled, the count can be viewed with per GT stat debugfs file.
This is similar to what is already in place for vma page faults.
Example output:
cat /sys/kernel/debug/dri/0/gt0/stats
svm_pagefault_count: 6
tlb_inval_count: 78
vma_pagefault_count: 0
vma_pagefault_kb: 0
v2: Fix build with CONFIG_DRM_GPUSVM disabled
v3: Update argument in kernel doc
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250312092749.164232-1-francois.dugast@intel.com
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
There's a mismatch on API: while xe_rtp_process_to_sr() processes
entries until an entry without name, the active tracking with
xe_rtp_process_ctx_enable_active_tracking() needs to use the number of
elements. The number of elements is taken everywhere using ARRAY_SIZE(),
but that will have one entry too many. This leads to the following
warning, as reported by lkp:
drivers/gpu/drm/xe/xe_tuning.c: In function 'xe_tuning_dump':
>> include/drm/drm_print.h:228:31: warning: '%s' directive argument is null [-Wformat-overflow=]
228 | drm_printf((printer), "%.*s" fmt, (indent), "\t\t\t\t\tX", ##__VA_ARGS__)
| ^~~~~~
drivers/gpu/drm/xe/xe_tuning.c:226:17: note: in expansion of macro 'drm_printf_indent'
226 | drm_printf_indent(p, 1, "%s\n", engine_tunings[idx].name);
| ^~~~~~~~~~~~~~~~~
That's because it will still process the last entry when tracking the
active tunings. The same issue exists in the WAs. Change
xe_rtp_process_to_sr() to also take the number of elements so the empty
entry can be removed and the warning should go away. Fixing on the
active-tracking side would more fragile as the it would need a `- 1`
everywhere and continue to use a different approach for number of
elements.
Aside from the warning, it's a non-issue as there would always be enough
bits allocated and the last entry would never be active since
xe_rtp_process_to_sr() stops on the sentinel.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503021906.P2MwAvyK-lkp@intel.com/
Cc: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306-fix-print-warning-v1-1-979c3dc03c0d@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 8aa8c2d421)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The function mtk_dp_wait_hpd_asserted() may be called before the
`mtk_dp->drm_dev` pointer is assigned in mtk_dp_bridge_attach().
Specifically it can be called via this callpath:
- mtk_edp_wait_hpd_asserted
- [panel probe]
- dp_aux_ep_probe
Using "drm" level prints anywhere in this callpath causes a NULL
pointer dereference. Change the error message directly in
mtk_dp_wait_hpd_asserted() to dev_err() to avoid this. Also change the
error messages in mtk_dp_parse_capabilities(), which is called by
mtk_dp_wait_hpd_asserted().
While touching these prints, also add the error code to them to make
future debugging easier.
Fixes: 7eacba9a08 ("drm/mediatek: dp: Add .wait_hpd_asserted() for AUX bus")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250116094249.1.I29b0b621abb613ddc70ab4996426a3909e1aa75f@changeid/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
