Pull "Rockchip dts32 changes for 4.17" from Heiko Stübner:
For general soc-specific changes the rk322x socs got their correct grf
compatible set. Other than that there are some board-specific changes
like the Rock2 getting its otg port, recovery and power keys enabled.
The vyasa board gained an enabled emmc node and the phyCORE boards
got UHS speeds in their sd card and a fixed sd-card power supply.
Finally the veyron boards dropped a nonstandard and unused property.
* tag 'v4.17-rockchip-dts32-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: enable USB-OTG port on Radxa Rock2 Square
ARM: dts: rockchip: add recovery button for Rock2 Square
ARM: dts: rockchip: add power key for Rock2 Square
ARM: dts: rockchip: Add eMMC node for rk3288-vyasa
ARM: dts: rockchip: Support UHS mode for SD card on phyCORE-RK3288 RDK
ARM: dts: rockchip: Fix supply node for card's power on phycore som
ARM: dts: rockchip: add "rockchip,rk3228-grf" compatible for rk322x grf node
ARM: dts: rockchip: drop veyron's nonstandard 'backlight-boot-off'
Pull "mvebu SPDX dt for 4.17: from Gregory CLEMENT:
convert to the SPDX-License-Identifier for the Kirkwood and the Armada
based device tree files.
Compared to the series submitted most of the patch have been squashed:
the result is grouped by SoC, boards, type of licenses and the patches
that were explicitly acked on the mailing list.
* tag 'mvebu-dt-4.17-spdx' of git://git.infradead.org/linux-mvebu:
arm: dts: kirkwood*.dts: use SPDX-License-Identifier for board using GPL-2.0+
arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0+/MIT
arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0
arm: dts: armada-385-turris-omnia: use SPDX-License-Identifier
arm: dts: armada-385-db-ap: use SPDX-License-Identifier
arm: dts: armada-388-rd: use SPDX-License-Identifier
arm: dts: armada-xp-db-xc3-24g4xg: use SPDX-License-Identifier
arm: dts: armada-xp-db-dxbc2: use SPDX-License-Identifier
arm: dts: armada-370-db: use SPDX-License-Identifier
arm: dts: armada-*.dts: use SPDX-License-Identifier for most of the Armada based board
arm: dts: armada-xp-98dx: use SPDX-License-Identifier for prestara 98d SoCs
arm: dts: armada-*.dtsi: use SPDX-License-Identifier for most of the Armada SoCs
Pull "mvebu dt for 4.17 (part 2)" from Gregory CLEMENT:
- add SFP module support on the clearfog (Armada 388 based board)
- disable internal RTC node for Linksys boards (Armada 38x based
boards)
* tag 'mvebu-dt-4.17-2' of git://git.infradead.org/linux-mvebu:
ARM: dts: armada388-clearfog: add SFP module support
ARM: dts: armada-385-linksys: Disable internal RTC
Follow the recent trend for the license description, and also fix the
wrongly stated X11 to MIT.
As already pointed on the DT ML, the X11 license text [1] is explicitly
for the X Consortium and has a couple of extra clauses. The MIT
license text [2] is actually what the current DT files claim.
[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.html
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Follow the recent trend for the license description, and also fix the
wrongly stated X11 to MIT.
As already pointed on the DT ML, the X11 license text [1] is explicitly
for the X Consortium and has a couple of extra clauses. The MIT
license text [2] is actually what the current DT files claim.
[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.html
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Follow the recent trend for the license description, and also fix the
wrongly stated X11 to MIT.
As already pointed on the DT ML, the X11 license text [1] is explicitly
for the X Consortium and has a couple of extra clauses. The MIT
license text [2] is actually what the current DT files claim.
[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.html
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The internal RTC does not work correctly on these Linksys boards based
on Marvell SoCs. For me it only shows Wed Dec 31 23:59:59 1969 and for
others it is off by 3 minutes in 10 minutes running, this was reported
by multiple users. On the Linksys Mamba device the device tree comment
says that no crystal is connected to the internal RTC, this is probably
also true for the other devices.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Pull "Freescale arm64 device tree fixups for 4.17" from Shawn Guo:
- It reverts a couple of patches that "fix" DTC warnings on IFC memory
controller in a wrong way. We will start over agagin to address the
DTC warnings later.
* tag 'imx-dt64-4.17-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
Revert "dt-bindings: ifc: Fix the unit address format in the examples"
Revert "arm64: dts: fsl: fix ifc simple-bus unit address format warnings"
Pull "Second set of dts changes for omap variants for v4.17" from Tony Lindgren:
This series of patches configures few new drivers and adds
omap5 specific nodes:
- Enable USB OTG mode for xhci on am437x
- A series of changes to configure aux control module instance
on omap5 mostly to get the audio clocks configured
- A series of changes to update droid4 for MDM6600 modem USB PHY
and UART1 pinctrl
* tag 'omap-for-v4.17/dt-pt2-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap4-droid4: Configure uart1 pins
ARM: dts: omap4-droid4: Configure MDM6600 USB PHY
ARM: dts: omap4-droid4: Fix USB PHY port naming
ARM: dts: omap5-board-common: Add phandle for mclk clock for twl6040
ARM: dts: omap5: add fref_xtal_ck support
ARM: dts: omap5: add support for control module wkup pad config
dt-bindings: omap5: ctrl: Support for control module wkup pad config
ARM: dts: am43xx: Enable dual-role mode for USB1
Pull "Allwinner H3/H5 changes for 4.17" from Maxime Ripard:
Here is our usual bunch of changes to the common DTSI shared between arm
and arm64, and their associated device trees.
Even though the diffstat is quite big, it's been mostly just cleanups. The
big feature is that the HDMI is now suported on H3 and H5 boards.
* tag 'sunxi-h3-h5-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: allwinner: H5: Add Xunlong Orange Pi Zero Plus
ARM: dts: sun8i-h3: Add Mali node
ARM64: dts: sun50i: h5: Enable HDMI output on H5 boards
ARM: dts: sun8i: h3: Enable HDMI output on H3 boards
ARM: dts: sunxi: h3/h5: Add HDMI pipeline
ARM: dts: sun8i: h2-plus: remove unnecessary mmc1_pins node
ARM: dts: sunxi: h3-h5: rename mmc0_pins_a and mmc1_pins_a
ARM: dts: sunxi: h3-h5: Move pinctrl of mmc1 from dts to dtsi
ARM: dts: sunxi: h3-h5: Move pinctrl of mmc0 from dts to dtsi
ARM: dts: sunxi: h3-h5: remove mmc0 card detection pin from pinctrl
ARM: dts: sun8i: h2+: add support for Banana Pi M2 Zero board
ARM: dts: sunxi: Switch MMC nodes away from cd-inverted property
ARM: dts: nanopi-neo-air: Add WiFi / eMMC
Pull "Allwinner arm64 DT changes for 4.17" from Maxime Ripard:
We've had for this release a pretty good progress on the arm64 front as
well:
- The A64 now has SPDIF support
- The H6 is now supported (even though at an early stage)
- The TERES-I laptop from Olimex has seen some early support as well
* tag 'sunxi-dt64-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: a64: Add support for TERES-I laptop
arm64: dts: allwinner: a64: add simplefb for A64 SoC
arm64: dts: allwinner: a64: Add watchdog
arm64: dts: allwinner: a64: Add i2c0 pins
arm64: allwinner: h6: add support for Pine H64 board
arm64: allwinner: h6: add the basical Allwinner H6 DTSI file
arm64: dts: sunxi: Switch MMC nodes away from cd-inverted property
arm64: dts: allwinner: a64: Add DAI nodes
arm64: dts: allwinner: a64: Add SPDIF to the Pine64
arm64: dts: allwinner: a64: Add SPDIF to the A64
arm64: dts: allwinner: a64: Add the SPDIF block and pin
Pull "Allwinner DT changes for 4.17" from Maxime Ripard:
There is a bunch of significant additions for this release cycle:
- The A83t now has HDMI support
- The A80 finally has SMP support (without PSCI, unfortunately)
- The A80 has preliminary display support
And also:
- a number of boards based on old (A10, A20) SoCs now have the HDMI
support enabled.
- The display frontend is enabled on the A33, allowing to use it for
hardware display scaling
- New boards: Olimex A20-SOM204 variants
* tag 'sunxi-dt-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (39 commits)
ARM: dts: sun9i: cubieboard4: Enable VGA display output
ARM: dts: sun9i: Add pinmux settings for LCD0 RGB888 output.
ARM: dts: sun9i: Add device nodes for documented display pipelines for A80
ARM: dts: sun8i: reference tablet design: Enable PMIC power supplies
ARM: dts: sun8i: a33: Enable A33 internal audio codec on A33-OLinuXino
ARM: dts: sun8i: a33: Enable PMIC power supplies on A33-OLinuXino
ARM: dts: sun8i: a33: Drop sunxi-common-regulators.dtsi for A33-OLinuXino
ARM: dts: sun8i: a33: Drop GPIO pinmux settings for A33-OLinuXino
ARM: dts: sun9i: Add enable-method for SMP support for the A80 SoC
ARM: dts: sun8i: h3: Add eMMC for NanoPi M1 Plus
ARM: dts: sun8i: a711: set regulator for each cluster of CPUs
ARM: dts: sun8i: a83t: add stable OPP tables and CPUfreq
ARM: dts: sun8i: a83t: add cpu0 and cpu100 labels
ARM: dtsi: axp81x: remove IP name from DT node name
ARM: dtsi: sun8i: a711: enable battery power supply subnode
ARM: dtsi: axp81x: add battery power supply subnode
ARM: dtsi: axp81x: add node for ADC
ARM: dtsi: axp22x: add node for ADC
ARM: dtsi: axp209: add node for ADC
ARM: dts: sun7i: Enable HDMI support on the Orange Pi mini
...
Pull "AT91 DT for 4.17 #2" from Alexandre Belloni:
Pinctrl fixes, the UART pullups were discussed back in 2016.
* tag 'at91-ab-4.17-dt2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
ARM: dts: at91sam9260: pullup rx on usart0
ARM: dts: at91rm9200: pullup rx on uart0
ARM: dts: at91: fixes uart pinctrl, set pullup on rx, clear pullup on tx
ARM: dts: at91: at91sam9g25: fix mux-mask pinctrl property
Pull "Amlogic 32-bit DT updates for v4.17" from Kevin Hilman:
- odroid-c1: add microSD, ethernet, USB reset
- add reset controller
- fix requesting GPIOs greater than GPIOZ_3
* tag 'amlogic-dt-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson8b: the CBUS GPIO controller only has 83 GPIOs
ARM: dts: meson8b-odroidc1: add microSD support
ARM: dts: meson8b: add the I2C clocks
ARM: dts: meson8b-odroidc1: ethernet support
ARM: dts: meson8b: extend ethernet controller description
ARM: dts: meson8: add the USB reset line
ARM: dts: meson8: add the reset controller
ARM: dts: meson8b: grow the reset controller memory zone
Pull "Qualcomm Device Tree Changes for v4.17" from Andy Gross:
* Add initial DTS file for Samsung Galaxy S5
* Fixups for castor touchscreen node
* Fixup QS600 at23 manufacturer
* Add XOADC and IIO to APQ8064
* tag 'qcom-dts-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/agross/linux:
ARM: dts: msm8974: castor: Fix typo and add startup delay in touchscreen node
ARM: dts: add XOADC and IIO HWMON to APQ8064
ARM: dts: use 'atmel' as at24 manufacturer for qcom-apq8064-cm-qs600
ARM: dts: qcom: Add initial DTS file for Samsung Galaxy S5 phone
The "cooling-min-level" and "cooling-max-level" properties are not
parsed by any part of the kernel currently and the max cooling state of
gpio-fan cooling device is found by referring to the
"gpio-fan,speed-map" instead.
Remove the unused properties from the gpio-fan node.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The "cooling-min-level" and "cooling-max-level" properties are not
parsed by any part of the kernel currently and the max cooling state of
gpio-fan cooling device is found by referring to the
"gpio-fan,speed-map" instead.
Remove the unused properties from the gpio-fan node.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The "cooling-min-level" and "cooling-max-level" properties are not
parsed by any part of the kernel currently and the max cooling state of
a CPU cooling device is found by referring to the cpufreq table instead.
Remove the unused properties from the CPU nodes.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull "DTS changes for RealView+Versatile" from Linus Walleij:
This augments the RealView and Versatile device trees to properly
define the VGA and panel connectors in preparation for DRM.
* tag 'armsoc-versatile-drm-dts' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: dts: Augment panel setting for Versatile
ARM: dts: Add Versatile IB2 device tree
ARM: dts: Augment VGA connector bridge on Realview PBX
ARM: dts: Augment VGA connector bridge on Realview EB
ARM: dts: Augment VGA connector bridge on PB1176
ARM: dts: Augment VGA connector bridge on PB11MPcore
Pull "Amlogic 64-bit DT updates for v4.17" from Kevin Hilman:
- AXG: add/enable UART_A, I2C, RMII, system controller, HW RNG
- accept MAC from u-boot environment
- misc. fixes
* tag 'amlogic-dt64' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM64: dts: meson-gx: make efuse read-only
ARM64: dts: meson: bump mali450 clk to 744MHz
meson-gx-socinfo: Add package id for S905H
ARM64: dts: meson-gxbb-wetek: add a wetek specific dtsi to cleanup hub and play2
ARM64: dts: meson: reduce odroid-c2 eMMC maximum rate
ARM64: dts: amlogic: Convert to new-style SPDX license identifiers
ARM64: dts: meson-axg: fix pwm_AO_cd compatible
ARM64: dts: meson-axg: add sec_AO system controller
ARM64: dts: meson: accept MAC addr from u-boot environment
ARM64: dts: meson s905x: accept MAC addr from u-boot environment
ARM64: dts: meson-axg: enable the UART_A controller
ARM64: dts: meson-axg: complete the pinctrl info for UART_AO_A
ARM64: dts: meson-axg: uart: Add the pinctrl info description
ARM64: dts: meson-axg: uart: drop legacy compatible name from EE UART
ARM64: dts: meson-axg: add RMII pins for ethernet controller
ARM64: dts: meson-axg: enable I2C Master-1 for the audio speaker
ARM64: dts: meson-axg: describe pin DT info for I2C controller
ARM64: dts: meson-axg: add I2C DT info for Meson-AXG SoC
ARM64: meson-axg: enable hardware rng
Pull "mvebu dt64 for 4.17 (part 2)" from Gregory CLEMENT:
- Add registers clock for all the peripheral nodes that had been yet
converted for CP110 (Armada 7K/8K)
- Document URL for schematic for the EspressoBin (Armada 3720)
* tag 'mvebu-dt64-4.17-2' of git://git.infradead.org/linux-mvebu:
arm64: dts: armada-3720-espressobin: Document URL for schematic
ARM64: dts: marvell: armada-cp110: Add registers clock for the PCIe nodes
ARM64: dts: marvell: armada-cp110: Add registers clock for the NAND node
ARM64: dts: marvell: armada-cp110: Add registers clock for the crypto node
ARM64: dts: marvell: armada-cp110: Add registers clock for the trng node
ARM64: dts: marvell: armada-cp110: Add registers clock for XOR engine nodes
ARM64: dts: marvell: armada-cp110: Add registers clock for USB host nodes
Pull "ARM: mediatek: dts32 updates for v4.16-next" from Matthias Brugger:
mt7623:
- fix style issues of the dts
- add cpu clock properties
- add PCI controller
- add mt7623 reference board
banapi-r2:
- enable missing uarts
- fix regulator for mmc
- fix USB initialization
* tag 'v4.16-next-dts32' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm: dts: mt7623: add PCIe related nodes
arm: dts: mt7623: use - instead of _ in DT node name
arm: dts: mt7623: remove useless property pinctrl-names at node switch@0
arm: dts: mt7623: add related clock properties to cpu[1-3] nodes
arm: dts: mt7623: enable three available UARTs on bananapi-r2
arm: dts: mt7623: fix the regulators mmc should use on bananapi-r2
arm: dts: mt7623: fix USB initialization fails on bananapi-r2
dt-bindings: arm: mediatek: add support for more mt7623 reference boards
Pull "Samsung DTS ARM changes for v4.17, part two" from Krzysztof Kozłowski:
1. Fix audio on Exynos5250 Chromebook Snow.
2. Enable HDMI audio Chromebook Snow, Peach Pit and Peach Pi.
3. Fix debounce of "OK" key on Midas (Trats2, Galaxy S3) boards.
* tag 'samsung-dt-4.17-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Add #sound-dai-cells property to exynos5250 i2s nodes
ARM: dts: exynos: Fix "debounce-interval" property misspelling in Midas
ARM: dts: exynos: Enable HDMI audio support on Peach Pi
ARM: dts: exynos: Enable HDMI audio support on Peach Pit
ARM: dts: exynos: Enable HDMI audio on Snow Chromebook
ARM: dts: exynos: Add missing clock and DAI properties to the max98095 node in Snow Chromebook
ARM: dts: exynos: Add audio clocks configuration for Snow Chromebook
ARM: dts: exynos: Add #sound-dai-cells property to hdmi node in exynos5250.dtsi
Pull "Renesas ARM Based SoC DT Updates for v4.17" from Simon Horman:
* Silk board with R-Car E2 (r8a7794) SoC
- Add r1ex24002 EEPROM to DT
Magnus Damm says "Extend the Silk board support to include U14 which is
an I2C based EEPROM hooked up to the I2C1 bus."
- Add GPIO keys to DT
Magnus Damm says "Extend the Silk board support to include SW3, SW4,
SW6 and SW12. They are all connected via GPIO lines and handled by the
gpio-keys driver"
* Marzen board with R-Car H1 (r7a7779) SoC
- Add SDHI0 VCCQ Regulator
Magnus Damm says "Add support for the on-board voltage regulator hooked
up to GPIO3_20 on r8a7779 Marzen. The board schematics describes the
regulator as U4 TPS2110A. Input wise, U4 has D0 fixed to ground, D1
tied to GPIO3_20 while IN1 is fixed to 3.3V and IN2 is fixed to 1.8V.
OUT goes to the pull-ups for the data pins of SDHI0."
* Porter board with R-Car M3W (r8a7791) SoC
- Fix HDMI output routing
Laurent Pinchart says "The HDMI encoder is connected to the RGB output
of the DU, which is port@0, not port@1."
* iWave Systems RZ/G1E SODIMM System On Module (iW-RainboW-G22M-SM) and
iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven)
- Enable cmt0
* Stout board with R-Car H2 (r8a7790) SoC
- Initial support
* Lager board with R-Car H2 (r8a7790) SoC
- Add CEC clock for HDMI transmitter
Niklas Söderlund says "The adv7511 on the Lager board has a 12 MHz
fixed clock for the CEC block. Specify this in the dts to enable CEC
support."
- Move cec_clock to root node
By definition nodes without a bus address do not belong on the bus
* kzm9d board with EMMA Mobile EV2 (EMEV2) SoC
- Fix "debounce-interval" property misspelling
* RZ/G1M (r8a7743) and RZ/G1H (r8a7745) SoCs
- Add IPMMU DT nodes
- Add VSP support
* R-Car Gen2 boards
- Use I2C demuxer for
This allows run-time switching between alternate I2C IP blocks
* R-Car Gen2 and RZ/G1 SoCs
- Clean up DT files to ease future maintenance
+ add soc node for IP attached to the bus
+ sort subnodes of soc and root node
+ consistently use single space after =
* R-Car H2 (r8a7790), M3-W (r8a7791) and M3-N (r7a7793) SoCs
- Reduce size of thermal registers
According to the "User's Manual: Hardware" v2.00 the registers at base
0xe61f0000 extend to an offset of 0x10, rather than 0x14 which is the
case on the r8a73a4 (R-Mobile APE6).
This should not have any runtime affect as mapping granularity is
PAGE_SIZE.
* tag 'renesas-dt-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (47 commits)
ARM: dts: silk: Add GPIO keys to DT
ARM: dts: silk: Add r1ex24002 EEPROM to DT
ARM: dts: marzen: Add SDHI0 VCCQ Regulator
ARM: dts: stout: Initial r8a7790 Stout board support
ARM: dts: lager: Move cec_clock to root node
ARM: dts: kzm9d: Fix "debounce-interval" property misspelling
ARM: dts: gose: use demuxer for I2C4
ARM: dts: gose: use demuxer for I2C2
ARM: dts: silk: use demuxer for I2C1
ARM: dts: alt: use demuxer for I2C1
ARM: dts: porter: use demuxer for I2C2
ARM: dts: koelsch: use demuxer for I2C4
ARM: dts: koelsch: use demuxer for I2C2
ARM: dts: lager: use demuxer for IIC3/I2C3
ARM: dts: lager: use demuxer for IIC2/I2C2
ARM: dts: r8a7745: Add VSP support
ARM: dts: r8a7743: Add VSP support
ARM: dts: r8a7745: Add IPMMU DT nodes
ARM: dts: r8a7743: Add IPMMU DT nodes
ARM: dts: r8a7745: sort subnodes of soc node
...
Pull "Renesas ARM64 Based SoC DT Updates for v4.17" from Simon Horman:
* R-Car Gen3 boards and SoCs
- Make phy-mode of EtherAVB a board-specific property.
The SoC DTs file now uses "rgmii" and boards override this with
"rgmii-txid" as appropriate. Previously "rgmii-txid" was used
in SoC DTs but this did not describe that more sophiticated
functionality is a board rather than SoC property.
* Condor board with R-Car V3H (r8a77980) SoC
- Initial upstream support
* Condor board with R-Car V3H (r8a77980) SoC
- Initial upstream support
* R-Car D3 (r8a77995)
- Add I2C nodes and then describing the PCA9654 I/O expander connected to
the I2C0 bus.
* Eagle board with R-Car V3M (r8a77970) SoC
- Enable PFC support for configuring SCIF0 pins
This uses PFC support added to the V3M DT
- Describe EtherAVB PHY IRQ
This uses support for GPIO added to the V3M DT
- Enable I2C0 support
Sergei Shtylyov says "The I2C0 bus is populated by ON Semiconductor
PCA9653 I/O expander and Analog Devices ADV7511W HDMI transmitter (but
we're only describing the former chip now)."
* R-Car V3M (r8a77970) SoCs
- Add PFC support
- Describe GPIO devices
- Describe I2C devices
- Srt subnodes of root node alphabetically to eas future maintence overhead
* Draak board with R-Car D3 (r8a77995) SoC
- Enable SDHI2
Wolfram Sang says "The single SDHI controller is connected to eMMC."
- Enable DU
Kieran Bingham says "Enable the DU, providing only the VGA output for
now."
* R-Car D3 (r8a77995) and V3M (r8a77970) SoCs
- Move nodes which have no reg property out of bus
By deffinition the bus only has hardware with an address on the bus
- Remove non-existing STBE region from EtherAVB
Stream Buffer for EtherAVB-IF (STBE) is not present on these SoCs
* R-Car D3 (r8a77995) SoC
- Add FCPV, VSP and DU support
Kieran Bingham says "The r8a77995-d3 platform supports 3 VSP instances.
One VSPBS can be used as a dual-input image blender, while two VSPD
instances can be utilised as part of a display (DU) pipeline.
Add support for these, along with their required FCPV nodes."
* Salvator-X and Salvator-XS boards with R-Car Gen3 SoCs
- Add GPIO extender
This is a basis for follow-up work to configure the GPIOs of the extender
* Salvator-X and Salvator-XS board with R-Car M3-N (r8a77965) SoC
- Initial upstream support
* R-Car H3 (r8a7795) and M3-W (r8a7796) SoCs
- Add OPPs table for cpu devices
This, along with recently upstreamed Z and Z2 clock support allows
use of CPUFreq with both A57 and A53 CPUs.
- Add thermal cooling management
Allows the use of CPUFreq as a cooling device on A57 CPUs
- Correct register size of thermal node
Niklas Söderlund says "To be able to read fused calibration values from
hardware the size of the register resource of TSC1 needs to be
incremented to cover one more register which holds the information if
the calibration values have been fused or not.
Instead of increasing TSC1 size to the value from the datasheet update
all TSC's size to the smallest granularity of the address decoder
circuitry"
- Fix register mappings on VSPs
Kieran Bingham says "The VSPD includes a CLUT on RPF2. Ensure that the
register space is mapped correctly to support this."
* R-Car H3 (r8a7795) SoC
- Move SCIF node into alphabetical order to ease future maintenance overhead
- Add IPMMU-PV1 device node
This resolves an oversight when IPMMU nodes were added to the H3 DT.
All IPMMU devices should now be described in DT.
- Add missing SYS-DMAC2 dmas
Geert Uytterhoeven says "On R-Car H3, on-chip peripheral modules that
can make use of DMA are wired to either SYS-DMAC0 only, or to both
SYS-DMAC1 and SYS-DMAC2.
Add the missing DMA properties pointing to SYS-DMAC2 for HSCIF[0-2],
SCIF[0125], and I2C[0-2]. These were initially left out because early
firmware versions prohibited using SYS-DMAC2. This restriction has
been lifted in IPL and Secure Monitor Rev1.0.6 (released on Feb 25,
2016)."
* tag 'renesas-arm64-dt-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (69 commits)
arm64: dts: renesas: v3msk: add SCIF0 pins
arm64: dts: renesas: r8a7795: Add missing SYS-DMAC2 dmas
arm64: dts: renesas: r8a7795: Add IPMMU-PV1 device node
arm64: dts: renesas: r8a77970: sort subnodes of root node alphabetically
arm64: dts: renesas: eagle: add I2C0 support
arm64: dts: renesas: r8a77970: add I2C support
arm64: dts: renesas: r8a77965-salvator-xs: Add SoC name to file header
arm64: dts: renesas: r8a77965: Add EtherAVB device node
arm64: dts: renesas: r8a77970: Set EtherAVB phy mode to "rgmii"
arm64: dts: renesas: r8a77995: Set EtherAVB phy mode to "rgmii"
arm64: dts: renesas: r8a7795: Set EtherAVB phy mode to "rgmii"
arm64: dts: renesas: r8a7796: Set EtherAVB phy mode to "rgmii"
arm64: dts: renesas: v3msk: Override EtherAVB phy-mode
arm64: dts: renesas: eagle: Override EtherAVB phy-mode
arm64: dts: renesas: draak: Override EtherAVB phy-mode
arm64: dts: renesas: ulcb: Override EtherAVB phy-mode
arm64: dts: renesas: salvator-common: Override EtherAVB phy-mode
arm64: dts: renesas: r8a77965: Add INTC-EX device node
arm64: dts: renesas: r8a77965: Add IIC-DVFS device node
arm64: dts: renesas: Add support for Salvator-XS with R-Car M3-N
...
Pull "arm64: tegra: Device tree changes for v4.17-rc1" from Thierry Reding:
Adds initial support for the P2972-0000 development board based on
Tegra194 and enables the AHCI controller on Jetson TX1.
* tag 'tegra-for-4.17-arm64-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Enable AHCI on Jetson TX1
arm64: tegra: Add SATA node for Tegra210
arm64: tegra: Add device tree for the Tegra194 P2972-0000 board
arm64: tegra: Add Tegra194 chip device tree
Pull "ARM: tegra: Device tree changes for v4.17-rc1" from Thierry Reding:
Support for the VDE is added on Tegra30 along with some general cleanup
and some improvements to the various Toradex boards.
* tag 'tegra-for-4.17-arm-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: apalis-tk1: Support v1.2 hardware revision
ARM: tegra: apalis-tk1: Copyright period, spurious newlines
ARM: tegra: apalis-tk1: Hog group for ethernet, PCIe, reset GPIOs
ARM: tegra: apalis-tk1: Add missing as3722 gpio0 configuration
ARM: tegra: apalis-tk1: Activate PWM pin muxing for pwm3
ARM: tegra: apalis-tk1: Set critical trips
ARM: tegra: apalis/colibri: Remove unneeded reg property
ARM: tegra: apalis/colibri: Use correct compatible for RTC
ARM: tegra: Fix I2C bus frequencies on Apalis/Colibri
ARM: tegra: venice2: Remove duplicate pcie-1 node
ARM: tegra: beaver: Remove invalid uses of rsvd1
ARM: tegra: Use proper IRQ type definitions
ARM: tegra: Fix ULPI regression on Tegra20
ARM: tegra: Add unit address to VDE IRAM area
ARM: tegra: Add video decoder node on Tegra30
ARM: tegra: Add IRAM node on Tegra30
Pull "dt-bindings: Tegra changes for v4.17-rc1" from Thierry Reding:
Mostly cleanup of existing bindings and initial support for Tegra194.
* tag 'tegra-for-4.17-dt-bindings' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt/bindings: Fix binding examples for Tegra GMI controller
dt-bindings: phy: Clarify ULPI PHY source clock
dt-bindings: tegra: Add documentation for nvidia,tegra194-pmc
dt-bindings: tegra: Add missing chips and NVIDIA boards
This reverts commit 4e017f1419.
As explained by Rob Herring:
"This "fix" is wrong. Memory controllers with chip selects should have
the chip select in the unit-address. The correct fix here is you should drop
"simple-bus"."
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This reverts commit f81d7af795.
As explained by Rob Herring:
"This "fix" is wrong. Memory controllers with chip selects should have
the chip select in the unit-address. The correct fix here is you should
drop "simple-bus"."
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fixes the warning "GIC: PPI13 is secure or misconfigured" by
changing the interrupt type from level_low to edge_raising
Signed-off-by: Philipp Puschmann <pp@emlix.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
For consistency with all other serial pins, add this pullup. It also
prevents the signal from floating and so consuming a useless extra amount
of power in crowbarred state if nothing is connected to RX.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
For consistency with all other serial pins, add this pullup. It also
prevents the signal from floating and so consuming a useless extra amount
of power in crowbarred state if nothing is connected to RX.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Remove pullup on uart TX signals, they are push-pull outputs thus
pullups are pointless.
Add pullup on uart RX signals, they prevent the RX signals to be left
floating and so consuming a useless extra amount of power in crowbarred
state if nothing is connected to RX.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
