[Why]
During driver unload, it is expected that p-state switching is supported.
If it's not supported, PMFW will hang due to a forced p-state switch. Even
if the current timing does not support p-state normally, we still want to
force allow because the worst that can happen is underflow. This will
match Navi10 behaviour.
[How]
- new hubbub func to control the force pstate register
- force allow when releasing display ownership
- registers are inaccessible after due to m_cgs.hwNotAvailable
- explicitly disable force signal during hw_init
- if driver is disabled and re-enabled, register not cleared otherwise
Also, remove DCN3 part of dcn10_init_hw, we will not be going back to it.
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
This change was implemented because the comment style was not uniform
across the file. In some lines comments were initiated with // and in
others they were in between /* ... */.
Additionally, the style for multi-line comments was also not uniform and
some comment lines were missing the space between the opening /* and the
first word of the comment.
[HOW]
All comments are now in between /*.../*, multi line comments also use
/*...*/ and for every comment there is now a space between the opening
/* and the first word of the comment.
Signed-off-by: Felipe <Felipe.Clark@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When running games or benchmarking with v-sync disabled, disabling
a plane (which is v-sync) can cause underflow. This is caused by
flips pending before pipe locking being applied after locks are
released and pipes could have been re-arranged or disconnected. This
could potentially apply a flip on incorrect pipe. Also, previous logic
of always locking pipes was unnecessary.
[How]
Only lock the pipes when there is a pipe being disabled to increase
efficiency. Before the pipes are locked, check that any pending flips
are cleared to ensure the flips are applied to the correct pipe.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We will hang if we report switch in VACTIVE but not in VBLANK and DPG_EN = 1
[How]
Block switch in ACTIVE if not supported in BLANK
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update dc for vangogh support.
v2: fix compilation without DCN 301 set.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Print the name of the client rather than the number. This
makes it easier to debug what block is causing the fault.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
APU needs load toc firmware for gfx10 series on psp front door loading.
v2: rebase against latest code
v3: clarify error message
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add smu initialize functions for vangogh.
v2: squash in updates
v3: drop duplicate table entries
v4: rebase fixes
Signed-off-by: Xiaojian Du <xiaojian.du@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VanGogh uses nbio v7.2, and a couple of offsets are changed since nbio
v2.3 for navi series, so add new nbio v7.2 block.
v2: squash in fix for sdma and vcn instances
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are too many register offset mismatch between mmhub v2.0 and v2.3.
E.X:
mmMM_ATC_L2_MISC_CG: 0x064a(v2.0) 0x06cd(v2.3)
mmMMVM_L2_PROTECTION_FAULT_CNTL: 0x0688(v2.0) 0x0708(v2.3)
mmMMVM_CONTEXT0_PAGE_TABLE_BASE_ADDR_LO32: 0x072b(v2.0) 0x0940(v2.3)
mmMMVM_CONTEXT0_PAGE_TABLE_BASE_ADDR_HI32: 0x072c(v2.0) 0x0941(v2.3)
mmMMVM_INVALIDATE_ENG0_REQ: 0x06e3(v2.0) 0x0a01(v2.3)
mmMMVM_INVALIDATE_ENG0_ACK: 0x06f5(v2.0) 0x0a02(v2.3)
mmMMVM_CONTEXT0_CNTL: 0x06c0(v2.0) 0x0740(v2.3)
mmMMVM_L2_PROTECTION_FAULT_STATUS: 0x068c(v2.0) 0x070c(v2.3)
mmMMVM_L2_PROTECTION_FAULT_CNTL: 0x0688(v2.0) 0x0708(v2.3)
mmMM_ATC_L2_MISC_CG: 0x064a(v2.0) 0x06cd(v2.3)
mmDAGB0_CNTL_MISC2: 0x0071(v2.0) 0x0096(v2.3)
...
Continuing using the same file mmhub v2.0 is not good choice, it will
introduce a lot of checking with ASIC types. And also easy to introduce the
issues that offset not align, this kind of issues are really hard to find. Van
Gogh's mmhub vm invalidation is actually caused by the offset mismatch as well.
So it would like to create a new file rather than stick to re-use orignal mmhub
v2.0 here.
v2: add missed translate_further programming.
v3: sync with latest code
v4: add missing callbacks
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add gfx memory controller support for van gogh.
v2: don't use dynamic invalidate eng allocation for van gogh.
v3: squash in other fixes
v4: rebase
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to get the correct vram type from atombios for van gogh.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The interrupts are not stable while uses guest physical address (GPA)
for interrupt packet write space even on direct loading case.
v2: make condition more readable
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Van gogh only has one sdma.
v2: use num_instances rather than APU flag
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds vangogh_reg_base_init function to init the register base for
van gogh.
v2: make vangogh_reg_base_init void, align equality sign
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
