Fix duplicate usb4 regression for dra74 variants
USB4 is only present in DRA74x variants, and I managed to add it for the
other variants too with the recent legacy platform data removal.
* tag 'omap-for-v5.13/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: dra7: Fix duplicate USB4 target module node
Link: https://lore.kernel.org/r/pull-1623999845-180025@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Fix PCIe address ranges that are affected by recent PCI changes.
There are 3 additional patches pending that handle the backward
compatiblity inside the PCI subsystem, but the address ranges
should be fixed anyway.
* tag 'v5.13-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Update RK3399 PCI host bridge window to 32-bit address memory
Link: https://lore.kernel.org/r/3405741.0S5aU1g85B@diego
Signed-off-by: Olof Johansson <olof@lixom.net>
The PCIe host bridge on RK3399 advertises a single 64-bit memory
address range even though it lies entirely below 4GB.
Previously the OF PCI range parser treated 64-bit ranges more
leniently (i.e., as 32-bit), but since commit 9d57e61bf7 ("of/pci:
Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses")
the code takes a stricter view and treats the ranges as advertised in
the device tree (i.e, as 64-bit).
The change in behaviour causes failure when allocating bus addresses
to devices connected behind a PCI-to-PCI bridge that require
non-prefetchable memory ranges. The allocation failure was observed
for certain Samsung NVMe drives connected to RockPro64 boards.
Update the host bridge window attributes to treat it as 32-bit address
memory. This fixes the allocation failure observed since commit
9d57e61bf7.
Reported-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/7a1e2ebc-f7d8-8431-d844-41a9c36a8911@arm.com
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Punit Agrawal <punitagrawal@gmail.com>
Tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20210607112856.3499682-5-punitagrawal@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
With [1] USB4 target-module node got defined in dra74x.dtsi file.
However, the earlier definition in [2] was not removed, and this
duplication of the target module is causing boot failure on dra74
variant boards - dra7-evm, dra76-evm.
USB4 is only present in DRA74x variants, so keeping the entry in
dra74x.dtsi and removing it from the top level interconnect hierarchy
dra7-l4.dtsi file. This change makes the USB4 target module no longer
visible to AM5718, DRA71x and DRA72x so removing references to it in
their respective dts files.
[1]: commit c7b72abca6 ("ARM: OMAP2+: Drop legacy platform data for
dra7 dwc3")
[2]: commit 549fce068a ("ARM: dts: dra7: Add l4 interconnect
hierarchy and ti-sysc data")
Fixes: c7b72abca6 ("ARM: OMAP2+: Drop legacy platform data for dra7 dwc3")
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Although the schematics of Pine A64-LTS and SoPine Baseboard shows both
the RX and TX internal delay are enabled, they're using the same broken
RTL8211E chip batch with Pine A64+, so they should use TXID instead, not
ID.
In addition, by checking the real components soldered on both a SoPine
Baseboard and a Pine A64-LTS, RX delay is not enabled (GR69 soldered and
GR70 NC) despite the schematics says it's enabled. It's a common
situation for Pine64 boards that the NC information on schematics is not
the same with the board.
So the RGMII delay mode should be TXID on these boards.
Fixes: c2b111e59a ("arm64: dts: allwinner: A64 Sopine: phy-mode rgmii-id")
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210609083843.463750-1-icenowy@aosc.io
Devicetree fixes for TI K3 platforms for v5.13 merge window:
These minor fixes include:
* Fixups for device tree discovered during yaml conversion
* Fixups for missing dma-coherent property in j7200
* Removal of camera sensor node from am65 evm dts to overlay
as camera sensor boards are variable.
* tag 'ti-k3-dt-fixes-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux:
arm64: dts: ti: k3*: Introduce reg definition for interrupt routers
arm64: dts: ti: k3-am65|j721e|am64: Map the dma / navigator subsystem via explicit ranges
arm64: dts: ti: k3-*: Rename the TI-SCI node
arm64: dts: ti: k3-am65-wakeup: Drop un-necessary properties from dmsc node
arm64: dts: ti: k3-am65-wakeup: Add debug region to TI-SCI node
arm64: dts: ti: k3-*: Rename the TI-SCI clocks node name
arm64: dts: ti: j7200-main: Mark Main NAVSS as dma-coherent
arm64: dts: ti: k3-am654-base-board: remove ov5640
Link: https://lore.kernel.org/r/20210518115634.467vgpbzplal5kou@obituary
Signed-off-by: Olof Johansson <olof@lixom.net>
OP-TEE use export_uuid() to copy UUID
* tag 'optee-fix-for-v5.13' of git://git.linaro.org/people/jens.wiklander/linux-tee:
optee: use export_uuid() to copy client UUID
Link: https://lore.kernel.org/r/20210518100712.GA449561@jade
Signed-off-by: Olof Johansson <olof@lixom.net>
PM and build warning fixes for omaps
While chasing system suspend related regressions, I noticed few other
issues related to PM would be good to have fixed:
- UART idling does not always work for hardware autoidle features
- am335x resume works only the first time unless musb module is loaded
Then there are three patches for omap1 related warnings caused by the gpio
changes, and one build warning fix for legacy mmc platform code when mmc
is built as a loadable module.
These can all be merged whenever suitable naturally. I've sent the more
urgent SATA regression fix separately although it appears in this pull
request too because of the branches merged.
* tag 'omap-for-v5.13/fixes-pm' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP1: ams-delta: remove unused function ams_delta_camera_power
bus: ti-sysc: Fix flakey idling of uarts and stop using swsup_sidle_act
bus: ti-sysc: Fix am335x resume hang for usb otg module
ARM: OMAP2+: Fix build warning when mmc_omap is not built
ARM: OMAP1: isp1301-omap: Add missing gpiod_add_lookup_table function
ARM: OMAP1: Fix use of possibly uninitialized irq variable
Link: https://lore.kernel.org/r/pull-1622614772-543196@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Regression fix for TI dra7 SATA not detecting drives
The SATA quirk flags are no missing With recent removal of legacy
platform data and we need to add the quirk flags to detect drives.
* tag 'omap-for-v5.13/fixes-sata' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Fix missing quirk flags for sata
Link: https://lore.kernel.org/r/pull-1622613578-121536@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
i.MX fixes for 5.13:
- Fix missing-prototypes warning of 'imx27_pm_init' in i.MX27 platform
pm code.
- A couple of patches from Fabio Estevam to fix 'tuning-step' property
in imx7d-meerkat96 and imx7d-pico DT.
- Fix '#gpio-cells' of nxp,pca8574 device in imx6qdl-emcon-avari DT.
- A couple of patches from Lucas Stach to fix regulator and voltage for
imx8mq-zii-ultra board.
- Add missing regulators for imx6q-dhcom to avoid possible instability
issues.
- Fix memory-controller settings for fsl-ls1028a DT.
- Fix RGMII clock and voltage for a couple of fsl-ls1028a-kontron-sl28
boards.
- Fix RGMII connection to QCA8334 switch for imx6dl-yapp4 board.
* tag 'imx-fixes-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx: emcon-avari: Fix nxp,pca8574 #gpio-cells
ARM: dts: imx7d-pico: Fix the 'tuning-step' property
ARM: dts: imx7d-meerkat96: Fix the 'tuning-step' property
arm64: dts: freescale: sl28: var1: fix RGMII clock and voltage
arm64: dts: freescale: sl28: var4: fix RGMII clock and voltage
ARM: imx: pm-imx27: Include "common.h"
arm64: dts: zii-ultra: fix 12V_MAIN voltage
arm64: dts: zii-ultra: remove second GEN_3V3 regulator instance
arm64: dts: ls1028a: fix memory node
ARM: dts: imx6q-dhcom: Add PU,VDD1P1,VDD2P5 regulators
ARM: dts: imx6dl-yapp4: Fix RGMII connection to QCA8334 switch
Link: https://lore.kernel.org/r/20210527011758.GD8194@dragon
Signed-off-by: Olof Johansson <olof@lixom.net>
The ams_delta_camera_power() function is unused as reports
Clang compilation with omap1_defconfig on linux-next:
arch/arm/mach-omap1/board-ams-delta.c:462:12: warning: unused function 'ams_delta_camera_power' [-Wunused-function]
static int ams_delta_camera_power(struct device *dev, int power)
^
1 warning generated.
The soc_camera support was dropped without removing
ams_delta_camera_power() function, making it unused.
Fixes: ce548396a4 ("media: mach-omap1: board-ams-delta.c: remove soc_camera dependencies")
Signed-off-by: Maciej Falkowski <maciej.falkowski9@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1326
Looks like the swsup_sidle_act quirk handling is unreliable for serial
ports. The serial ports just eventually stop idling until woken up and
re-idled again. As the serial port not idling blocks any deeper SoC idle
states, it's adds an annoying random flakeyness for power management.
Let's just switch to swsup_sidle quirk instead like we already do for
omap3 uarts. This means we manually idle the port instead of trying to
use the hardware autoidle features when not in use.
For more details on why the serial ports have been using swsup_idle_act,
see commit 66dde54e97 ("ARM: OMAP2+: hwmod-data: UART IP needs software
control to manage sidle modes"). It seems that the swsup_idle_act quirk
handling is not enough though, and for example the TI Android kernel
changed to using swsup_sidle with commit 77c34c84e1e0 ("OMAP4: HWMOD:
UART1: disable smart-idle.").
Fixes: b4a9a7a389 ("bus: ti-sysc: Handle swsup idle mode quirks")
Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Cc: Ivan Jelincic <parazyd@dyne.org>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Sicelo A. Mhlongo <absicsz@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Pull perf fixes from Thomas Gleixner:
"Two perf fixes:
- Do not check the LBR_TOS MSR when setting up unrelated LBR MSRs as
this can cause malfunction when TOS is not supported
- Allocate the LBR XSAVE buffers along with the DS buffers upfront
because allocating them when adding an event can deadlock"
* tag 'perf-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/lbr: Remove cpuc->lbr_xsave allocation from atomic context
perf/x86: Avoid touching LBR_TOS MSR for Arch LBR
Pull locking fixes from Thomas Gleixner:
"Two locking fixes:
- Invoke the lockdep tracepoints in the correct place so the ordering
is correct again
- Don't leave the mutex WAITER bit stale when the last waiter is
dropping out early due to a signal as that forces all subsequent
lock operations needlessly into the slowpath until it's cleaned up
again"
* tag 'locking-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/mutex: clear MUTEX_FLAGS if wait_list is empty due to signal
locking/lockdep: Correct calling tracepoints
Pull irq fixes from Thomas Gleixner:
"A few fixes for irqchip drivers:
- Allocate interrupt descriptors correctly on Mainstone PXA when
SPARSE_IRQ is enabled; otherwise the interrupt association fails
- Make the APPLE AIC chip driver depend on APPLE
- Remove redundant error output on devm_ioremap_resource() failure"
* tag 'irq-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: Remove redundant error printing
irqchip/apple-aic: APPLE_AIC should depend on ARCH_APPLE
ARM: PXA: Fix cplds irqdesc allocation when using legacy mode
Pull x86 fixes from Borislav Petkov:
- Fix how SEV handles MMIO accesses by forwarding potential page faults
instead of killing the machine and by using the accessors with the
exact functionality needed when accessing memory.
- Fix a confusion with Clang LTO compiler switches passed to the it
- Handle the case gracefully when VMGEXIT has been executed in
userspace
* tag 'x86_urgent_for_v5.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev-es: Use __put_user()/__get_user() for data accesses
x86/sev-es: Forward page-faults which happen during emulation
x86/sev-es: Don't return NULL from sev_es_get_ghcb()
x86/build: Fix location of '-plugin-opt=' flags
x86/sev-es: Invalidate the GHCB after completing VMGEXIT
x86/sev-es: Move sev_es_put_ghcb() in prep for follow on patch
Pull powerpc fixes from Michael Ellerman:
- Fix breakage of strace (and other ptracers etc.) when using the new
scv ABI (Power9 or later with glibc >= 2.33).
- Fix early_ioremap() on 64-bit, which broke booting on some machines.
Thanks to Dmitry V. Levin, Nicholas Piggin, Alexey Kardashevskiy, and
Christophe Leroy.
* tag 'powerpc-5.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s/syscall: Fix ptrace syscall info with scv syscalls
powerpc/64s/syscall: Use pt_regs.trap to distinguish syscall ABI difference between sc and scv syscalls
powerpc: Fix early setup to make early_ioremap() work
Pull Kbuild fixes from Masahiro Yamada:
- Fix short log indentation for tools builds
- Fix dummy-tools to adjust to the latest stackprotector check
* tag 'kbuild-fixes-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: dummy-tools: adjust to stricter stackprotector check
scripts/jobserver-exec: Fix a typo ("envirnoment")
tools build: Fix quiet cmd indentation
According to Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml, the
correct name of the property is 'fsl,tuning-step'.
Fix it accordingly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Fixes: f13f571ac8 ("ARM: dts: imx7d-pico: Extend peripherals support")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml, the
correct name of the property is 'fsl,tuning-step'.
Fix it accordingly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Fixes: ae7b3384b6 ("ARM: dts: Add support for 96Boards Meerkat96 board")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
During hardware validation it was noticed that the clock isn't
continuously enabled when there is no link. This is because the 125MHz
clock is derived from the internal PLL which seems to go into some kind
of power-down mode every once in a while. The LS1028A expects a contiuous
clock. Thus enable the PLL all the time.
Also, the RGMII pad voltage is wrong, it was configured to 2.5V (that is
the VDDH regulator). The correct voltage is 1.8V, i.e. the VDDIO
regulator.
This fix is for the freescale/fsl-ls1028a-kontron-sl28-var1.dts.
Fixes: 642856097c ("arm64: dts: freescale: sl28: add variant 1")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
During hardware validation it was noticed that the clock isn't
continuously enabled when there is no link. This is because the 125MHz
clock is derived from the internal PLL which seems to go into some kind
of power-down mode every once in a while. The LS1028A expects a contiuous
clock. Thus enable the PLL all the time.
Also, the RGMII pad voltage is wrong. It was configured to 2.5V (that is
the VDDH regulator). The correct voltage is 1.8V, i.e. the VDDIO
regulator.
This fix is for the freescale/fsl-ls1028a-kontron-sl28-var4.dts.
Fixes: 815364d042 ("arm64: dts: freescale: add Kontron sl28 support")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Since commit 879c0e5e0a ("ARM: imx: Remove i.MX27 board files")
the following W=1 build warning is seen:
arch/arm/mach-imx/pm-imx27.c:40:13: warning: no previous prototype for 'imx27_pm_init' [-Wmissing-prototypes]
Fix it by including the "common.h" header file, which
contains the prototype for imx27_pm_init().
Fixes: 879c0e5e0a ("ARM: imx: Remove i.MX27 board files")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
As this is a fixed regulator on the board there was no harm in the wrong
voltage being specified, apart from a confusing reporting to userspace.
Fixes: 4a13b3bec3 ("arm64: dts: imx: add Zii Ultra board support")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
When adding the sound support a second instance of the GEN_3V3 regulator was
added by accident. Remove it and point the consumers to the first instance.
Fixes: 663a5b5efa ("arm64: dts: zii-ultra: add sound support")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Merge misc fixes from Andrew Morton:
"10 patches.
Subsystems affected by this patch series: mm (pagealloc, gup, kasan,
and userfaultfd), ipc, selftests, watchdog, bitmap, procfs, and lib"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
userfaultfd: hugetlbfs: fix new flag usage in error path
lib: kunit: suppress a compilation warning of frame size
proc: remove Alexey from MAINTAINERS
linux/bits.h: fix compilation error with GENMASK
watchdog: reliable handling of timestamps
kasan: slab: always reset the tag in get_freepointer_safe()
tools/testing/selftests/exec: fix link error
ipc/mqueue, msg, sem: avoid relying on a stack reference past its expiry
Revert "mm/gup: check page posion status for coredump."
mm/shuffle: fix section mismatch warning
lib/bitfield_kunit.c: In function `test_bitfields_constants':
lib/bitfield_kunit.c:93:1: warning: the frame size of 7456 bytes is larger than 2048 bytes [-Wframe-larger-than=]
}
^
As the description of BITFIELD_KUNIT in lib/Kconfig.debug, it "Only useful
for kernel devs running the KUnit test harness, and not intended for
inclusion into a production build". Therefore, it is not worth modifying
variable 'test_bitfields_constants' to clear this warning. Just suppress
it.
Link: https://lkml.kernel.org/r/20210518094533.7652-1-thunder.leizhen@huawei.com
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Vitor Massaru Iha <vitor@massaru.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 9bf3bc949f ("watchdog: cleanup handling of false positives")
tried to handle a virtual host stopped by the host a more
straightforward and cleaner way.
But it introduced a risk of false softlockup reports. The virtual host
might be stopped at any time, for example between
kvm_check_and_clear_guest_paused() and is_softlockup(). As a result,
is_softlockup() might read the updated jiffies and detects a softlockup.
A solution might be to put back kvm_check_and_clear_guest_paused() after
is_softlockup() and detect it. But it would put back the cycle that
complicates the logic.
In fact, the handling of all the timestamps is not reliable. The code
does not guarantee when and how many times the timestamps are read. For
example, "period_ts" might be touched anytime also from NMI and re-read in
is_softlockup(). It works just by chance.
Fix all the problems by making the code even more explicit.
1. Make sure that "now" and "period_ts" timestamps are read only once.
They might be changed at anytime by NMI or when the virtual guest is
stopped by the host. Note that "now" timestamp does this implicitly
because "jiffies" is marked volatile.
2. "now" time must be read first. The state of "period_ts" will
decide whether it will be used or the period will get restarted.
3. kvm_check_and_clear_guest_paused() must be called before reading
"period_ts". It touches the variable when the guest was stopped.
As a result, "now" timestamp is used only when the watchdog was not
touched and the guest not stopped in the meantime. "period_ts" is
restarted in all other situations.
Link: https://lkml.kernel.org/r/YKT55gw+RZfyoFf7@alley
Fixes: 9bf3bc949f ("watchdog: cleanup handling of false positives")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reported-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the link error by adding '-static':
gcc -Wall -Wl,-z,max-page-size=0x1000 -pie load_address.c -o /home/yang/linux/tools/testing/selftests/exec/load_address_4096
/usr/bin/ld: /tmp/ccopEGun.o: relocation R_AARCH64_ADR_PREL_PG_HI21 against symbol `stderr@@GLIBC_2.17' which may bind externally can not be used when making a shared object; recompile with -fPIC
/usr/bin/ld: /tmp/ccopEGun.o(.text+0x158): unresolvable R_AARCH64_ADR_PREL_PG_HI21 relocation against symbol `stderr@@GLIBC_2.17'
/usr/bin/ld: final link failed: bad value
collect2: error: ld returned 1 exit status
make: *** [Makefile:25: tools/testing/selftests/exec/load_address_4096] Error 1
Link: https://lkml.kernel.org/r/20210514092422.2367367-1-yangyingliang@huawei.com
Fixes: 206e22f019 ("tools/testing/selftests: add self-test for verifying load alignment")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Cc: Chris Kennelly <ckennelly@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
do_mq_timedreceive calls wq_sleep with a stack local address. The
sender (do_mq_timedsend) uses this address to later call pipelined_send.
This leads to a very hard to trigger race where a do_mq_timedreceive
call might return and leave do_mq_timedsend to rely on an invalid
address, causing the following crash:
RIP: 0010:wake_q_add_safe+0x13/0x60
Call Trace:
__x64_sys_mq_timedsend+0x2a9/0x490
do_syscall_64+0x80/0x680
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f5928e40343
The race occurs as:
1. do_mq_timedreceive calls wq_sleep with the address of `struct
ext_wait_queue` on function stack (aliased as `ewq_addr` here) - it
holds a valid `struct ext_wait_queue *` as long as the stack has not
been overwritten.
2. `ewq_addr` gets added to info->e_wait_q[RECV].list in wq_add, and
do_mq_timedsend receives it via wq_get_first_waiter(info, RECV) to call
__pipelined_op.
3. Sender calls __pipelined_op::smp_store_release(&this->state,
STATE_READY). Here is where the race window begins. (`this` is
`ewq_addr`.)
4. If the receiver wakes up now in do_mq_timedreceive::wq_sleep, it
will see `state == STATE_READY` and break.
5. do_mq_timedreceive returns, and `ewq_addr` is no longer guaranteed
to be a `struct ext_wait_queue *` since it was on do_mq_timedreceive's
stack. (Although the address may not get overwritten until another
function happens to touch it, which means it can persist around for an
indefinite time.)
6. do_mq_timedsend::__pipelined_op() still believes `ewq_addr` is a
`struct ext_wait_queue *`, and uses it to find a task_struct to pass to
the wake_q_add_safe call. In the lucky case where nothing has
overwritten `ewq_addr` yet, `ewq_addr->task` is the right task_struct.
In the unlucky case, __pipelined_op::wake_q_add_safe gets handed a
bogus address as the receiver's task_struct causing the crash.
do_mq_timedsend::__pipelined_op() should not dereference `this` after
setting STATE_READY, as the receiver counterpart is now free to return.
Change __pipelined_op to call wake_q_add_safe on the receiver's
task_struct returned by get_task_struct, instead of dereferencing `this`
which sits on the receiver's stack.
As Manfred pointed out, the race potentially also exists in
ipc/msg.c::expunge_all and ipc/sem.c::wake_up_sem_queue_prepare. Fix
those in the same way.
Link: https://lkml.kernel.org/r/20210510102950.12551-1-varad.gautam@suse.com
Fixes: c5b2cbdbda ("ipc/mqueue.c: update/document memory barriers")
Fixes: 8116b54e7e ("ipc/sem.c: document and update memory barriers")
Fixes: 0d97a82ba8 ("ipc/msg.c: update and document memory barriers")
Signed-off-by: Varad Gautam <varad.gautam@suse.com>
Reported-by: Matthias von Faber <matthias.vonfaber@aox-tech.de>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
clang sometimes decides not to inline shuffle_zone(), but it calls a
__meminit function. Without the extra __meminit annotation we get this
warning:
WARNING: modpost: vmlinux.o(.text+0x2a86d4): Section mismatch in reference from the function shuffle_zone() to the function .meminit.text:__shuffle_zone()
The function shuffle_zone() references
the function __meminit __shuffle_zone().
This is often because shuffle_zone lacks a __meminit
annotation or the annotation of __shuffle_zone is wrong.
shuffle_free_memory() did not show the same problem in my tests, but it
could happen in theory as well, so mark both as __meminit.
Link: https://lkml.kernel.org/r/20210514135952.2928094-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull block fixes from Jens Axboe:
- Fix BLKRRPART and deletion race (Gulam, Christoph)
- NVMe pull request (Christoph):
- nvme-tcp corruption and timeout fixes (Sagi Grimberg, Keith
Busch)
- nvme-fc teardown fix (James Smart)
- nvmet/nvme-loop memory leak fixes (Wu Bo)"
* tag 'block-5.13-2021-05-22' of git://git.kernel.dk/linux-block:
block: fix a race between del_gendisk and BLKRRPART
block: prevent block device lookups at the beginning of del_gendisk
nvme-fc: clear q_live at beginning of association teardown
nvme-tcp: rerun io_work if req_list is not empty
nvme-tcp: fix possible use-after-completion
nvme-loop: fix memory leak in nvme_loop_create_ctrl()
nvmet: fix memory leak in nvmet_alloc_ctrl()
Pull io_uring fixes from Jens Axboe:
"One fix for a regression with poll in this merge window, and another
just hardens the io-wq exit path a bit"
* tag 'io_uring-5.13-2021-05-22' of git://git.kernel.dk/linux-block:
io_uring: fortify tctx/io_wq cleanup
io_uring: don't modify req->poll for rw
Pull xen fixes from Juergen Gross:
- a fix for a boot regression when running as PV guest on hardware
without NX support
- a small series fixing a bug in the Xen pciback driver when
configuring a PCI card with multiple virtual functions
* tag 'for-linus-5.13b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen-pciback: reconfigure also from backend watch handler
xen-pciback: redo VF placement in the virtual topology
x86/Xen: swap NX determination and GDT setup on BSP
