Compiler warnings can catch bugs at compile time; thus, heeding them is
usually a good idea. Turn warnings into errors by default for the kublk
build so that anyone making changes is forced to heed them. Compiler
warnings can also sometimes produce annoying false positives, so provide
a flag WERROR that the developer can use as follows to have the build
and selftests run go through even if there are warnings:
make WERROR=0 TARGETS=ublk kselftest
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250429-ublk_selftests-v2-1-e970b6d9e4f4@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge 6.15 block fixes in, once again, to resolve conflicts with the
fixes for ublk that went into mainline and the 6.16 ublk updates.
* block-6.15:
nvmet-auth: always free derived key data
nvmet-tcp: don't restore null sk_state_change
nvmet-tcp: select CONFIG_TLS from CONFIG_NVME_TARGET_TCP_TLS
nvme-tcp: select CONFIG_TLS from CONFIG_NVME_TCP_TLS
nvme-tcp: fix premature queue removal and I/O failover
nvme-pci: add quirks for WDC Blue SN550 15b7:5009
nvme-pci: add quirks for device 126f:1001
nvme-pci: fix queue unquiesce check on slot_reset
ublk: remove the check of ublk_need_req_ref() from __ublk_check_and_get_req
ublk: enhance check for register/unregister io buffer command
ublk: decouple zero copy from user copy
selftests: ublk: fix UBLK_F_NEED_GET_DATA
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A ublk_io is converted to a request in several places in the I/O path by
using blk_mq_tag_to_rq() to look up the (qid, tag) on the ublk device's
tagset. This involves a bunch of dereferences and a tag bounds check.
To make this conversion cheaper, store the request pointer in ublk_io.
Overlap this storage with the io_uring_cmd pointer. This is safe because
the io_uring_cmd pointer is only valid if UBLK_IO_FLAG_ACTIVE is set on
the ublk_io, the request pointer is valid if UBLK_IO_FLAG_OWNED_BY_SRV,
and these flags are mutually exclusive.
Suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250430225234.2676781-10-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ublk_abort_queue() currently checks whether the UBLK_IO_FLAG_ACTIVE flag
is cleared to tell whether to abort each ublk_io in the queue. But it's
possible for a ublk_io to not be ACTIVE but also not have a request in
flight, such as when no fetch request has yet been submitted for a tag
or when a fetch request is cancelled. So ublk_abort_queue() must
additionally check for an inflight request.
Simplify this code by checking for UBLK_IO_FLAG_OWNED_BY_SRV instead,
which indicates precisely whether a request is currently inflight.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250430225234.2676781-9-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ublk_dispatch_req() currently handles 3 different cases: incoming ublk
requests that don't need to wait for a data buffer, incoming requests
that do need to wait for a buffer, and resuming those requests once the
buffer is provided. But the call site that provides a data buffer
(UBLK_IO_NEED_GET_DATA) is separate from those for incoming requests.
So simplify the function by splitting the UBLK_IO_NEED_GET_DATA case
into its own function ublk_get_data(). This avoids several redundant
checks in the UBLK_IO_NEED_GET_DATA case, and streamlines the incoming
request cases.
Don't call ublk_fill_io_cmd() for UBLK_IO_NEED_GET_DATA, as it's no
longer necessary to set io->cmd or the UBLK_IO_FLAG_ACTIVE flag for
ublk_dispatch_req().
Since UBLK_IO_NEED_GET_DATA no longer relies on ublk_dispatch_req()
calling io_uring_cmd_done(), return the UBLK_IO_RES_OK status directly
from the ->uring_cmd() handler. If ublk_start_io() fails, don't complete
the UBLK_IO_NEED_GET_DATA command, matching the existing behavior.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250430225234.2676781-8-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the logic for the UBLK_IO_COMMIT_AND_FETCH_REQ opcode into its own
function. This also allows us to mark ublk_queue pointers as const for
that operation, which can help prevent data races since we may allow
concurrent operation on one ublk_queue in the future. Also open code
ublk_commit_completion in ublk_commit_and_fetch to reduce the number of
parameters/avoid a redundant lookup.
[Restore __ublk_ch_uring_cmd() req variable used in commit d6aa0c178b
("ublk: call ublk_dispatch_req() for handling UBLK_U_IO_NEED_GET_DATA")]
Suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://lore.kernel.org/r/20250430225234.2676781-2-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_flush_plug_list() has a fast path if all requests in the plug
are destined for the same request_queue. It calls ->queue_rqs() with the
whole batch of requests, falling back on ->queue_rq() for any requests
not handled by ->queue_rqs(). However, if the requests are destined for
multiple queues, blk_mq_flush_plug_list() has a slow path that calls
blk_mq_dispatch_list() repeatedly to filter the requests by ctx/hctx.
Each queue's requests are inserted into the hctx's dispatch list under a
spinlock, then __blk_mq_sched_dispatch_requests() takes them out of the
dispatch list (taking the spinlock again), and finally
blk_mq_dispatch_rq_list() calls ->queue_rq() on each request.
Acquiring the hctx spinlock twice and calling ->queue_rq() instead of
->queue_rqs() makes the slow path significantly more expensive. Thus,
batching more requests into a single plug (e.g. io_uring_enter syscall)
can counterintuitively hurt performance by causing the plug to span
multiple queues. We have observed 2-3% of CPU time spent acquiring the
hctx spinlock alone on workloads issuing requests to multiple NVMe
devices in the same io_uring SQE batches.
Add a medium path in blk_mq_flush_plug_list() for plugs that don't have
elevators or come from a schedule, but do span multiple queues. Filter
the requests by queue and call ->queue_rqs()/->queue_rq() on the list of
requests destined to each request_queue.
With this change, we no longer see any CPU time spent in _raw_spin_lock
from blk_mq_flush_plug_list and throughput increases accordingly.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250426011728.4189119-4-csander@purestorage.com
[axboe: fix whitespace damage]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_plug_issue_direct(), __blk_mq_flush_plug_list(), and
blk_mq_dispatch_plug_list() take a struct blk_plug * but only use its
mq_list. Pass the struct rq_list * instead in preparation for calling
them with other lists of requests.
Drop "plug" from the function names as they are no longer plug-specific.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250426011728.4189119-2-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The zoned loop block device driver allows a user to create emulated
zoned block devices using one regular file per zone as backing storage.
Compared to null_blk or scsi_debug, it has the advantage of allowing
emulating large zoned devices without requiring the same amount of
memory as the capacity of the emulated device. Furthermore, zoned
devices emulated with this driver can be re-started after a host reboot
without any loss of the state of the device zones, which is something
that null_blk and scsi_debug do not support.
This initial implementation is simple and does not support zone resource
limits. That is, a zoned loop block device limits for the maximum number
of open zones and maximum number of active zones is always 0.
This driver can be either compiled in-kernel or as a module, named
"zloop". Compilation of this driver depends on the block layer support
for zoned block device (CONFIG_BLK_DEV_ZONED must be set).
Using the zloop driver to create and delete zoned block devices is
done by writing commands to the zoned loop control character device file
(/dev/zloop-control). Creating a device is done with:
$ echo "add [options]" > /dev/zloop-control
The options available for the "add" operation cat be listed by reading
the zloop-control device file:
$ cat /dev/zloop-control
add id=%d,capacity_mb=%u,zone_size_mb=%u,zone_capacity_mb=%u,conv_zones=%u,base_dir=%s,nr_queues=%u,queue_depth=%u
remove id=%d
The options available allow controlling the zoned device total
capacity, zone size, zone capactity of sequential zones, total number
of conventional zones, base directory for the zones backing file, number
of I/O queues and the maximum queue depth of I/O queues.
Deleting a device is done using the "remove" command:
$ echo "remove id=0" > /dev/zloop-control
This implementation passes various tests using zonefs and fio (t/zbd
tests) and provides a state machine for zone conditions that is
compliant with the T10 ZBC and NVMe ZNS specifications.
Co-developed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250407075222.170336-2-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After calling nvme_auth_derive_tls_psk() we need to free the resulting
psk data, as either TLS is disable (and we don't need the data anyway)
or the psk data is copied into the resulting key (and can be free, too).
Fixes: fa2e0f8bbc ("nvmet-tcp: support secure channel concatenation")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Suggested-by: Maurizio Lombardi <mlombard@bsdbackstore.eu>
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Ensure that TLS support is enabled in the kernel when
CONFIG_NVME_TARGET_TCP_TLS is enabled. Without this the code compiles,
but does not actually work unless something else enables CONFIG_TLS.
Fixes: 675b453e02 ("nvmet-tcp: enable TLS handshake upcall")
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Ensure that TLS support is enabled in the kernel when
CONFIG_NVME_TCP_TLS is enabled. Without this the code compiles, but does
not actually work unless something else enables CONFIG_TLS.
Fixes: be8e82caa6 ("nvme-tcp: enable TLS handshake upcall")
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch addresses a data corruption issue observed in nvme-tcp during
testing.
In an NVMe native multipath setup, when an I/O timeout occurs, all
inflight I/Os are canceled almost immediately after the kernel socket is
shut down. These canceled I/Os are reported as host path errors,
triggering a failover that succeeds on a different path.
However, at this point, the original I/O may still be outstanding in the
host's network transmission path (e.g., the NIC’s TX queue). From the
user-space app's perspective, the buffer associated with the I/O is
considered completed since they're acked on the different path and may
be reused for new I/O requests.
Because nvme-tcp enables zero-copy by default in the transmission path,
this can lead to corrupted data being sent to the original target,
ultimately causing data corruption.
We can reproduce this data corruption by injecting delay on one path and
triggering i/o timeout.
To prevent this issue, this change ensures that all inflight
transmissions are fully completed from host's perspective before
returning from queue stop. To handle concurrent I/O timeout from multiple
namespaces under the same controller, always wait in queue stop
regardless of queue's state.
This aligns with the behavior of queue stopping in other NVMe fabric
transports.
Fixes: 3f2304f8c6 ("nvme-tcp: add NVMe over TCP host driver")
Signed-off-by: Michael Liang <mliang@purestorage.com>
Reviewed-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Reviewed-by: Randy Jennings <randyj@purestorage.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add two quirks for the WDC Blue SN550 (PCI ID 15b7:5009) based on user
reports and hardware analysis:
- NVME_QUIRK_NO_DEEPEST_PS:
liaozw talked to me the problem and solved with
nvme_core.default_ps_max_latency_us=0, so add the quirk.
I also found some reports in the following link.
- NVME_QUIRK_BROKEN_MSI:
after get the lspci from Jack Rio.
I think that the disk also have NVME_QUIRK_BROKEN_MSI.
described in commit d5887dc6b6 ("nvme-pci: Add quirk for broken MSIs")
as sean said in link which match the MSI 1/32 and MSI-X 17.
Log:
lspci -nn | grep -i memory
03:00.0 Non-Volatile memory controller [0108]: Sandisk Corp SanDisk Ultra 3D / WD PC SN530, IX SN530, Blue SN550 NVMe SSD (DRAM-less) [15b7:5009] (rev 01)
lspci -v -d 15b7:5009
03:00.0 Non-Volatile memory controller: Sandisk Corp SanDisk Ultra 3D / WD PC SN530, IX SN530, Blue SN550 NVMe SSD (DRAM-less) (rev 01) (prog-if 02 [NVM Express])
Subsystem: Sandisk Corp WD Blue SN550 NVMe SSD
Flags: bus master, fast devsel, latency 0, IRQ 35, IOMMU group 10
Memory at fe800000 (64-bit, non-prefetchable) [size=16K]
Memory at fe804000 (64-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 3
Capabilities: [90] MSI: Enable- Count=1/32 Maskable- 64bit+
Capabilities: [b0] MSI-X: Enable+ Count=17 Masked-
Capabilities: [c0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [150] Device Serial Number 00-00-00-00-00-00-00-00
Capabilities: [1b8] Latency Tolerance Reporting
Capabilities: [300] Secondary PCI Express
Capabilities: [900] L1 PM Substates
Kernel driver in use: nvme
dmesg | grep nvme
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.12.20-amd64-desktop-rolling root=UUID= ro splash quiet nvme_core.default_ps_max_latency_us=0 DEEPIN_GFXMODE=
[ 0.059301] Kernel command line: BOOT_IMAGE=/vmlinuz-6.12.20-amd64-desktop-rolling root=UUID= ro splash quiet nvme_core.default_ps_max_latency_us=0 DEEPIN_GFXMODE=
[ 0.542430] nvme nvme0: pci function 0000:03:00.0
[ 0.560426] nvme nvme0: allocated 32 MiB host memory buffer.
[ 0.562491] nvme nvme0: 16/0/0 default/read/poll queues
[ 0.567764] nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8 p9
[ 6.388726] EXT4-fs (nvme0n1p7): mounted filesystem ro with ordered data mode. Quota mode: none.
[ 6.893421] EXT4-fs (nvme0n1p7): re-mounted r/w. Quota mode: none.
[ 7.125419] Adding 16777212k swap on /dev/nvme0n1p8. Priority:-2 extents:1 across:16777212k SS
[ 7.157588] EXT4-fs (nvme0n1p6): mounted filesystem r/w with ordered data mode. Quota mode: none.
[ 7.165021] EXT4-fs (nvme0n1p9): mounted filesystem r/w with ordered data mode. Quota mode: none.
[ 8.036932] nvme nvme0: using unchecked data buffer
[ 8.096023] block nvme0n1: No UUID available providing old NGUID
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=d5887dc6b6c054d0da3cd053afc15b7be1f45ff6
Link: https://lore.kernel.org/all/20240422162822.3539156-1-sean.anderson@linux.dev/
Reported-by: liaozw <hedgehog-002@163.com>
Closes: https://bbs.deepin.org.cn/post/286300
Reported-by: rugk <rugk+github@posteo.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=208123
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
A zero return means the reset was successfully scheduled. We don't want
to unquiesce the queues while the reset_work is pending, as that will
just flush out requeued requests to a failed completion.
Fixes: 71a5bb153b ("nvme: ensure disabling pairs with unquiesce")
Reported-by: Dhankaran Singh Ajravat <dhankaran@meta.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The simple check of UBLK_IO_FLAG_OWNED_BY_SRV can avoid incorrect
register/unregister io buffer easily, so check it before calling
starting to register/un-register io buffer.
Also only allow io buffer register/unregister uring_cmd in case of
UBLK_F_SUPPORT_ZERO_COPY.
Also mark argument 'ublk_queue *' of ublk_register_io_buf as const.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: 1f6540e2aa ("ublk: zc register/unregister bvec")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250429022941.1718671-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
UBLK_F_USER_COPY and UBLK_F_SUPPORT_ZERO_COPY are two different
features, and shouldn't be coupled together.
Commit 1f6540e2aa ("ublk: zc register/unregister bvec") enables
user copy automatically in case of UBLK_F_SUPPORT_ZERO_COPY, this way
isn't correct.
So decouple zero copy from user copy, and use independent helper to
check each one.
Fixes: 1f6540e2aa ("ublk: zc register/unregister bvec")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250429022941.1718671-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 57e13a2e8c ("selftests: ublk: support user recovery") starts to
support UBLK_F_NEED_GET_DATA for covering recovery feature, however the
ublk utility implementation isn't done correctly.
Fix it by supporting UBLK_F_NEED_GET_DATA correctly.
Also add test generic_07 for covering UBLK_F_NEED_GET_DATA.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: 57e13a2e8c ("selftests: ublk: support user recovery")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250429022941.1718671-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge 6.15 block fixes - both to get the fixes causing issues with
XFS testing, but also to make it easier for 6.16 ublk patches to avoid
conflicts.
* block-6.15:
ublk: fix race between io_uring_cmd_complete_in_task and ublk_cancel_cmd
ublk: call ublk_dispatch_req() for handling UBLK_U_IO_NEED_GET_DATA
block: don't autoload drivers on blk-cgroup configuration
block: don't autoload drivers on stat
block: remove the backing_inode variable in bdev_statx
block: move blkdev_{get,put} _no_open prototypes out of blkdev.h
block: never reduce ra_pages in blk_apply_bdi_limits
selftests: ublk: common: fix _get_disk_dev_t for pre-9.0 coreutils
selftests: ublk: remove useless 'delay_us' from 'struct dev_ctx'
selftests: ublk: fix recover test
block: hoist block size validation code to a separate function
block: fix race between set_blocksize and read paths
nvmet: fix out-of-bounds access in nvmet_enable_port
We call io_uring_cmd_complete_in_task() to schedule task_work for handling
UBLK_U_IO_NEED_GET_DATA.
This way is really not necessary because the current context is exactly
the ublk queue context, so call ublk_dispatch_req() directly for handling
UBLK_U_IO_NEED_GET_DATA.
Fixes: 216c8f5ef0 ("ublk: replace monitor with cancelable uring_cmd")
Tested-by: Jared Holzman <jholzman@nvidia.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250425013742.1079549-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When the user increased the read-ahead size through sysfs this value
currently get lost if the device is reprobe, including on a resume
from suspend.
As there is no hardware limitation for the read-ahead size there is
no real need to reset it or track a separate hardware limitation
like for max_sectors.
This restores the pre-atomic queue limit behavior in the sd driver as
sd did not use blk_queue_io_opt and thus never updated the read ahead
size to the value based of the optimal I/O, but changes behavior for
all other drivers. As the new behavior seems useful and sd is the
driver for which the readahead size tweaks are most useful that seems
like a worthwhile trade off.
Fixes: 804e498e04 ("sd: convert to the atomic queue limits API")
Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20250424082521.1967286-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
