Pull block fix from Jens Axboe:
"Just a single fix for a regression that occured in this merge window"
* tag 'block-5.17-2022-03-10' of git://git.kernel.dk/linux-block:
block: fix blk_mq_attempt_bio_merge and rq_qos_throttle protection
Pull staging driver fixes from Greg KH:
"Here are three small fixes for staging drivers for 5.17-rc8 or -final,
which ever comes next.
They resolve some reported problems:
- rtl8723bs wifi driver deadlock fix for reported problem that is a
revert of a previous patch. Also a documentation fix is added so
that the same problem hopefully can not come back again.
- gdm724x driver use-after-free fix for a reported problem.
All of these have been in linux-next for a while with no reported
problems"
* tag 'staging-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723bs: Improve the comment explaining the locking rules
staging: rtl8723bs: Fix access-point mode deadlock
staging: gdm724x: fix use after free in gdm_lte_rx()
Pull ARM SoC fixes from Arnd Bergmann:
"Here is a third set of fixes for the soc tree, well within the
expected set of changes.
Maintainer list changes:
- Krzysztof Kozlowski and Jisheng Zhang both have new email addresses
- Broadcom iProc has a new git tree
Regressions:
- Robert Foss sends a revert for a Mediatek DPI bridge patch that
caused an inadvertent break in the DT binding
- mstar timers need to be included in Kconfig
Devicetree fixes for:
- Aspeed ast2600 spi pinmux
- Tegra eDP panels on Nyan FHD
- Tegra display IOMMU
- Qualcomm sm8350 UFS clocks
- minor DT changes for Marvell Armada, Qualcomm sdx65, Qualcomm
sm8450, and Broadcom BCM2711"
* tag 'soc-fixes-5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0
MAINTAINERS: Update Jisheng's email address
Revert "arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint"
dt-bindings: drm/bridge: anx7625: Revert DPI support
ARM: dts: aspeed: Fix AST2600 quad spi group
MAINTAINERS: update Krzysztof Kozlowski's email
MAINTAINERS: Update git tree for Broadcom iProc SoCs
ARM: tegra: Move Nyan FHD panels to AUX bus
arm64: dts: armada-3720-turris-mox: Add missing ethernet0 alias
ARM: mstar: Select HAVE_ARM_ARCH_TIMER
soc: mediatek: mt8192-mmsys: Fix dither to dsi0 path's input sel
arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint
ARM: boot: dts: bcm2711: Fix HVS register range
arm64: dts: qcom: c630: disable crypto due to serror
arm64: dts: qcom: sm8450: fix apps_smmu interrupts
arm64: dts: qcom: sm8450: enable GCC_USB3_0_CLKREF_EN for usb
arm64: dts: qcom: sm8350: Correct UFS symbol clocks
arm64: tegra: Disable ISO SMMU for Tegra194
Revert "dt-bindings: arm: qcom: Document SDX65 platform and boards"
Instead of using GUP, make fault_in_safe_writeable() actually force a
'handle_mm_fault()' using the same fixup_user_fault() machinery that
futexes already use.
Using the GUP machinery meant that fault_in_safe_writeable() did not do
everything that a real fault would do, ranging from not auto-expanding
the stack segment, to not updating accessed or dirty flags in the page
tables (GUP sets those flags on the pages themselves).
The latter causes problems on architectures (like s390) that do accessed
bit handling in software, which meant that fault_in_safe_writeable()
didn't actually do all the fault handling it needed to, and trying to
access the user address afterwards would still cause faults.
Reported-and-tested-by: Andreas Gruenbacher <agruenba@redhat.com>
Fixes: cdd591fc86 ("iov_iter: Introduce fault_in_iov_iter_writeable")
Link: https://lore.kernel.org/all/CAHc6FU5nP+nziNGG0JAF1FUx-GV7kKFvM7aZuU_XD2_1v4vnvg@mail.gmail.com/
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mvebu fixes for 5.17 (part 2)
Allow using old PCIe card on Armada 37xx
* tag 'mvebu-fixes-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0
Link: https://lore.kernel.org/r/87bkydj4fn.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Legacy and old PCI I/O based cards do not support 32-bit I/O addressing.
Since commit 64f160e19e ("PCI: aardvark: Configure PCIe resources from
'ranges' DT property") kernel can set different PCIe address on CPU and
different on the bus for the one A37xx address mapping without any firmware
support in case the bus address does not conflict with other A37xx mapping.
So remap I/O space to the bus address 0x0 to enable support for old legacy
I/O port based cards which have hardcoded I/O ports in low address space.
Note that DDR on A37xx is mapped to bus address 0x0. And mapping of I/O
space can be set to address 0x0 too because MEM space and I/O space are
separate and so do not conflict.
Remapping IO space on Turris Mox to different address is not possible to
due bootloader bug.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 76f6386b25 ("arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700")
Cc: stable@vger.kernel.org # 64f160e19e ("PCI: aardvark: Configure PCIe resources from 'ranges' DT property")
Cc: stable@vger.kernel.org # 514ef1e62d ("arm64: dts: marvell: armada-37xx: Extend PCIe MEM space")
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Pull spi fix from Mark Brown:
"One fix for type conversion issues when working out maximum
scatter/gather segment sizes.
It caused problems for some systems where the limits overflow
due to the type conversion"
* tag 'spi-fix-v5.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: Fix invalid sgs value
The kernel test robot discovered that building without
HARDEN_BRANCH_PREDICTOR issues a warning due to a missing
argument to pr_info().
Add the missing argument.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 9dd78194a3 ("ARM: report Spectre v2 status through sysfs")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull gpio fixes from Bartosz Golaszewski:
- fix a probe failure for Tegra241 GPIO controller in gpio-tegra186
- revert changes that caused a regression in the sysfs user-space
interface
- correct the debounce time conversion in GPIO ACPI
- statify a struct in gpio-sim and fix a typo
- update registers in correct order (hardware quirk) in gpio-ts4900
* tag 'gpio-fixes-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: sim: fix a typo
gpio: ts4900: Do not set DAT and OE together
gpio: sim: Declare gpio_sim_hog_config_item_ops static
gpiolib: acpi: Convert ACPI value of debounce to microseconds
gpio: Revert regression in sysfs-gpio (gpiolib.c)
gpio: tegra186: Add IRQ per bank for Tegra241
Just noticed this when applying Andy's patch. s/childred/children/
Fixes: cb8c474e79 ("gpio: sim: new testing module")
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This works around an issue with the hardware where both OE and
DAT are exposed in the same register. If both are updated
simultaneously, the harware makes no guarantees that OE or DAT
will actually change in any given order and may result in a
glitch of a few ns on a GPIO pin when changing direction and value
in a single write.
Setting direction to input now only affects OE bit. Setting
direction to output updates DAT first, then OE.
Fixes: 9c6686322d ("gpio: add Technologic I2C-FPGA gpio support")
Signed-off-by: Mark Featherston <mark@embeddedTS.com>
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Pull clk fixes from Stephen Boyd:
"One more small batch of clk driver fixes:
- A fix for the Qualcomm GDSC power domain delays that avoids black
screens at boot on some more recent SoCs that use a different delay
than the hard-coded delays in the driver.
- A build fix LAN966X clk driver that let it be built on
architectures that didn't have IOMEM"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: lan966x: Fix linking error
clk: qcom: dispcc: Update the transition delay for MDSS GDSC
clk: qcom: gdsc: Add support to update GDSC transition delay
Pull xen fixes from Juergen Gross:
"Several Linux PV device frontends are using the grant table interfaces
for removing access rights of the backends in ways being subject to
race conditions, resulting in potential data leaks, data corruption by
malicious backends, and denial of service triggered by malicious
backends:
- blkfront, netfront, scsifront and the gntalloc driver are testing
whether a grant reference is still in use. If this is not the case,
they assume that a following removal of the granted access will
always succeed, which is not true in case the backend has mapped
the granted page between those two operations.
As a result the backend can keep access to the memory page of the
guest no matter how the page will be used after the frontend I/O
has finished. The xenbus driver has a similar problem, as it
doesn't check the success of removing the granted access of a
shared ring buffer.
- blkfront, netfront, scsifront, usbfront, dmabuf, xenbus, 9p,
kbdfront, and pvcalls are using a functionality to delay freeing a
grant reference until it is no longer in use, but the freeing of
the related data page is not synchronized with dropping the granted
access.
As a result the backend can keep access to the memory page even
after it has been freed and then re-used for a different purpose.
- netfront will fail a BUG_ON() assertion if it fails to revoke
access in the rx path.
This will result in a Denial of Service (DoS) situation of the
guest which can be triggered by the backend"
* tag 'xsa396-5.17-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/netfront: react properly to failing gnttab_end_foreign_access_ref()
xen/gnttab: fix gnttab_end_foreign_access() without page specified
xen/pvcalls: use alloc/free_pages_exact()
xen/9p: use alloc/free_pages_exact()
xen/usb: don't use gnttab_end_foreign_access() in xenhcd_gnttab_done()
xen: remove gnttab_query_foreign_access()
xen/gntalloc: don't use gnttab_query_foreign_access()
xen/scsifront: don't use gnttab_query_foreign_access() for mapped status
xen/netfront: don't use gnttab_query_foreign_access() for mapped status
xen/blkfront: don't use gnttab_query_foreign_access() for mapped status
xen/grant-table: add gnttab_try_end_foreign_access()
xen/xenbus: don't let xenbus_grant_ring() remove grants in error case
Pull arm64 build fix from Catalin Marinas:
"Fix kernel build with clang LTO after the inclusion of the Spectre BHB
arm64 mitigations"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Do not include __READ_ONCE() block in assembly files
ld.lld does not support the NOCROSSREFS directive at the moment, which
breaks the build after commit b9baf5c8c5 ("ARM: Spectre-BHB
workaround"):
ld.lld: error: ./arch/arm/kernel/vmlinux.lds:34: AT expected, but got NOCROSSREFS
Support for this directive will eventually be implemented, at which
point a version check can be added. To avoid breaking the build in the
meantime, just define NOCROSSREFS to nothing when using ld.lld, with a
link to the issue for tracking.
Cc: stable@vger.kernel.org
Fixes: b9baf5c8c5 ("ARM: Spectre-BHB workaround")
Link: https://github.com/ClangBuiltLinux/linux/issues/1609
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When building arm64 defconfig + CONFIG_LTO_CLANG_{FULL,THIN}=y after
commit 558c303c97 ("arm64: Mitigate spectre style branch history side
channels"), the following error occurs:
<instantiation>:4:2: error: invalid fixup for movz/movk instruction
mov w0, #ARM_SMCCC_ARCH_WORKAROUND_3
^
Marc figured out that moving "#include <linux/init.h>" in
include/linux/arm-smccc.h into a !__ASSEMBLY__ block resolves it. The
full include chain with CONFIG_LTO=y from include/linux/arm-smccc.h:
include/linux/init.h
include/linux/compiler.h
arch/arm64/include/asm/rwonce.h
arch/arm64/include/asm/alternative-macros.h
arch/arm64/include/asm/assembler.h
The asm/alternative-macros.h include in asm/rwonce.h only happens when
CONFIG_LTO is set, which ultimately casues asm/assembler.h to be
included before the definition of ARM_SMCCC_ARCH_WORKAROUND_3. As a
result, the preprocessor does not expand ARM_SMCCC_ARCH_WORKAROUND_3 in
__mitigate_spectre_bhb_fw, which results in the error above.
Avoid this problem by just avoiding the CONFIG_LTO=y __READ_ONCE() block
in asm/rwonce.h with assembly files, as nothing in that block is useful
to assembly files, which allows ARM_SMCCC_ARCH_WORKAROUND_3 to be
properly expanded with CONFIG_LTO=y builds.
Fixes: e35123d83e ("arm64: lto: Strengthen READ_ONCE() to acquire when CONFIG_LTO=y")
Cc: <stable@vger.kernel.org> # 5.11.x
Link: https://lore.kernel.org/r/20220309155716.3988480-1-maz@kernel.org/
Reported-by: Marc Zyngier <maz@kernel.org>
Acked-by: James Morse <james.morse@arm.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20220309191633.2307110-1-nathan@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Pull HID fixes from Jiri Kosina:
- sysfs attributes leak fix for Google Vivaldi driver (Dmitry Torokhov)
- fix for potential out-of-bounds read in Thrustmaster driver (Pavel
Skripkin)
- error handling reference leak in Elo driver (Jiri Kosina)
- a few new device IDs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: nintendo: check the return value of alloc_workqueue()
HID: vivaldi: fix sysfs attributes leak
HID: hid-thrustmaster: fix OOB read in thrustmaster_interrupts
HID: elo: Revert USB reference counting
HID: Add support for open wheel and no attachment to T300
HID: logitech-dj: add new lightspeed receiver id
Pull arm64 fixes from Catalin Marinas:
- Fix compilation of eBPF object files that indirectly include
mte-kasan.h.
- Fix test for execute-only permissions with EPAN (Enhanced Privileged
Access Never, ARMv8.7 feature).
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kasan: fix include error in MTE functions
arm64: Ensure execute-only permissions are not allowed without EPAN
In the recent Spectre BHB patches, there was a typo that is only
exposed in certain configurations: mcr p15,0,XX,c7,r5,4 should have
been mcr p15,0,XX,c7,c5,4
Reported-by: kernel test robot <lkp@intel.com>
Fixes: b9baf5c8c5 ("ARM: Spectre-BHB workaround")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 9d497e2941 ("block: don't protect submit_bio_checks by
q_usage_counter") moved blk_mq_attempt_bio_merge and rq_qos_throttle
calls out of q_usage_counter protection. However, these functions require
q_usage_counter protection. The blk_mq_attempt_bio_merge call without
the protection resulted in blktests block/005 failure with KASAN null-
ptr-deref or use-after-free at bio merge. The rq_qos_throttle call
without the protection caused kernel hang at qos throttle.
To fix the failures, move the blk_mq_attempt_bio_merge and
rq_qos_throttle calls back to q_usage_counter protection.
Fixes: 9d497e2941 ("block: don't protect submit_bio_checks by q_usage_counter")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20220308080915.3473689-1-shinichiro.kawasaki@wdc.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull devicetree fixes from Rob Herring:
- Fix pinctrl node name warnings in examples
- Add missing 'mux-states' property in ti,tcan104x-can binding
* tag 'devicetree-fixes-for-5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: phy: ti,tcan104x-can: Document mux-states property
dt-bindings: mfd: Fix pinctrl node name warnings
Pull fuse fixes from Miklos Szeredi:
- Fix an issue with splice on the fuse device
- Fix a regression in the fileattr API conversion
- Add a small userspace API improvement
* tag 'fuse-fixes-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: fix pipe buffer lifetime for direct_io
fuse: move FUSE_SUPER_MAGIC definition to magic.h
fuse: fix fileattr op failure
Pull arm64 spectre fixes from James Morse:
"ARM64 Spectre-BHB mitigations:
- Make EL1 vectors per-cpu
- Add mitigation sequences to the EL1 and EL2 vectors on vulnerble
CPUs
- Implement ARCH_WORKAROUND_3 for KVM guests
- Report Vulnerable when unprivileged eBPF is enabled"
* tag 'arm64-spectre-bhb-for-v5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: proton-pack: Include unprivileged eBPF status in Spectre v2 mitigation reporting
arm64: Use the clearbhb instruction in mitigations
KVM: arm64: Allow SMCCC_ARCH_WORKAROUND_3 to be discovered and migrated
arm64: Mitigate spectre style branch history side channels
arm64: proton-pack: Report Spectre-BHB vulnerabilities as part of Spectre-v2
arm64: Add percpu vectors for EL1
arm64: entry: Add macro for reading symbol addresses from the trampoline
arm64: entry: Add vectors that have the bhb mitigation sequences
arm64: entry: Add non-kpti __bp_harden_el1_vectors for mitigations
arm64: entry: Allow the trampoline text to occupy multiple pages
arm64: entry: Make the kpti trampoline's kpti sequence optional
arm64: entry: Move trampoline macros out of ifdef'd section
arm64: entry: Don't assume tramp_vectors is the start of the vectors
arm64: entry: Allow tramp_alias to access symbols after the 4K boundary
arm64: entry: Move the trampoline data page before the text page
arm64: entry: Free up another register on kpti's tramp_exit path
arm64: entry: Make the trampoline cleanup optional
KVM: arm64: Allow indirect vectors to be used without SPECTRE_V3A
arm64: spectre: Rename spectre_v4_patch_fw_mitigation_conduit
arm64: entry.S: Add ventry overflow sanity checks
Pull ARM spectre fixes from Russell King:
"ARM Spectre BHB mitigations.
These patches add Spectre BHB migitations for the following Arm CPUs
to the 32-bit ARM kernels:
- Cortex A15
- Cortex A57
- Cortex A72
- Cortex A73
- Cortex A75
- Brahma B15
for CVE-2022-23960"
* tag 'for-linus-bhb' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: include unprivileged BPF status in Spectre V2 reporting
ARM: Spectre-BHB workaround
ARM: use LOADADDR() to get load address of sections
ARM: early traps initialisation
ARM: report Spectre v2 status through sysfs
The recent addition pinctrl.yaml in commit c09acbc499 ("dt-bindings:
pinctrl: use pinctrl.yaml") resulted in some node name warnings:
Documentation/devicetree/bindings/mfd/cirrus,lochnagar.example.dt.yaml: \
lochnagar-pinctrl: $nodename:0: 'lochnagar-pinctrl' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$'
Documentation/devicetree/bindings/mfd/cirrus,madera.example.dt.yaml: \
codec@1a: $nodename:0: 'codec@1a' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$'
Documentation/devicetree/bindings/mfd/brcm,cru.example.dt.yaml: \
pin-controller@1c0: $nodename:0: 'pin-controller@1c0' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$'
Fix the node names to the preferred 'pinctrl'. For cirrus,madera,
nothing from pinctrl.yaml schema is used, so just drop the reference.
Fixes: c09acbc499 ("dt-bindings: pinctrl: use pinctrl.yaml")
Cc: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220303232350.2591143-1-robh@kernel.org
The mitigations for Spectre-BHB are only applied when an exception
is taken, but when unprivileged BPF is enabled, userspace can
load BPF programs that can be used to exploit the problem.
When unprivileged BPF is enabled, report the vulnerable status via
the spectre_v2 sysfs file.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Revert DPI support from binding.
DPI support relies on the bus-type enum which does not yet support
Mipi DPI, since no v4l2_fwnode_bus_type has been defined for this
bus type.
When DPI for anx7625 was initially added, it assumed that
V4L2_FWNODE_BUS_TYPE_PARALLEL was the correct bus type for
representing DPI, which it is not.
In order to prevent adding this mis-usage to the ABI, let's revert
the support.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Requesting quad mode for the FMC resulted in an error:
&fmc {
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fwqspi_default>'
[ 0.742963] aspeed-g6-pinctrl 1e6e2000.syscon:pinctrl: invalid function FWQSPID in map table

This is because the quad mode pins are a group of pins, not a function.
After applying this patch we can request the pins and the QSPI data
lines are muxed:
# cat /sys/kernel/debug/pinctrl/1e6e2000.syscon\:pinctrl-aspeed-g6-pinctrl/pinmux-pins |grep 1e620000.spi
pin 196 (AE12): device 1e620000.spi function FWSPID group FWQSPID
pin 197 (AF12): device 1e620000.spi function FWSPID group FWQSPID
pin 240 (Y1): device 1e620000.spi function FWSPID group FWQSPID
pin 241 (Y2): device 1e620000.spi function FWSPID group FWQSPID
pin 242 (Y3): device 1e620000.spi function FWSPID group FWQSPID
pin 243 (Y4): device 1e620000.spi function FWSPID group FWQSPID
Fixes: f510f04c8c ("ARM: dts: aspeed: Add AST2600 pinmux nodes")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20220304011010.974863-1-joel@jms.id.au
Link: https://lore.kernel.org/r/20220304011010.974863-1-joel@jms.id.au'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM: tegra: Device tree fixes for v5.17
One more patch to fix up eDP panels on Nyan FHD models.
* tag 'tegra-for-5.17-arm-dt-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Move Nyan FHD panels to AUX bus
ARM: tegra: Move panels to AUX bus
Link: https://lore.kernel.org/r/20220308084339.2199400-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit 18107f8a2d ("arm64: Support execute-only permissions with
Enhanced PAN") re-introduced execute-only permissions when EPAN is
available. When EPAN is not available, arch_filter_pgprot() is supposed
to change a PAGE_EXECONLY permission into PAGE_READONLY_EXEC. However,
if BTI or MTE are present, such check does not detect the execute-only
pgprot in the presence of PTE_GP (BTI) or MT_NORMAL_TAGGED (MTE),
allowing the user to request PROT_EXEC with PROT_BTI or PROT_MTE.
Remove the arch_filter_pgprot() function, change the default VM_EXEC
permissions to PAGE_READONLY_EXEC and update the protection_map[] array
at core_initcall() if EPAN is detected.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 18107f8a2d ("arm64: Support execute-only permissions with Enhanced PAN")
Cc: <stable@vger.kernel.org> # 5.13.x
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Compiler is not happy:
warning: symbol 'gpio_sim_hog_config_item_ops' was not declared. Should it be static?
Fixes: cb8c474e79 ("gpio: sim: new testing module")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Pull x86 spectre fixes from Borislav Petkov:
- Mitigate Spectre v2-type Branch History Buffer attacks on machines
which support eIBRS, i.e., the hardware-assisted speculation
restriction after it has been shown that such machines are vulnerable
even with the hardware mitigation.
- Do not use the default LFENCE-based Spectre v2 mitigation on AMD as
it is insufficient to mitigate such attacks. Instead, switch to
retpolines on all AMD by default.
- Update the docs and add some warnings for the obviously vulnerable
cmdline configurations.
* tag 'x86_bugs_for_v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation: Warn about eIBRS + LFENCE + Unprivileged eBPF + SMT
x86/speculation: Warn about Spectre v2 LFENCE mitigation
x86/speculation: Update link to AMD speculation whitepaper
x86/speculation: Use generic retpoline by default on AMD
x86/speculation: Include unprivileged eBPF status in Spectre v2 mitigation reporting
Documentation/hw-vuln: Update spectre doc
x86/speculation: Add eIBRS + Retpoline options
x86/speculation: Rename RETPOLINE_AMD to RETPOLINE_LFENCE
arm64: tegra: Device tree fixes for v5.17
This contains a single, last-minute fix to disable the display SMMU by
default because under some circumstances leaving it enabled by default
can cause SMMU faults on boot.
* tag 'tegra-for-5.17-arm64-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Disable ISO SMMU for Tegra194
Link: https://lore.kernel.org/r/20220307182120.2169598-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Current git tree for Broadcom iProc SoCs is pretty outdated as it has
not updated for a long time. Fix the reference.
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
Pull MTD fix from Miquel Raynal:
"As part of a previous changeset introducing support for the K3
architecture, the OMAP_GPMC (a non visible symbol) got selected by the
selection of MTD_NAND_OMAP2 instead of doing so from the architecture
directly (like for the other users of these two drivers). Indeed, from
a hardware perspective, the OMAP NAND controller needs the GPMC to
work.
This led to a robot error which got addressed in fix merge into -rc4.
Unfortunately, the approach at this time still used "select" and lead
to further build error reports (sparc64:allmodconfig).
This time we switch to 'depends on' in order to prevent random
misconfigurations. The different dependencies will however need a
future cleanup"
* tag 'mtd/fixes-for-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: omap2: Actually prevent invalid configuration and build error
Pull virtio fixes from Michael Tsirkin:
"Some last minute fixes that took a while to get ready. Not
regressions, but they look safe and seem to be worth to have"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
tools/virtio: handle fallout from folio work
tools/virtio: fix virtio_test execution
vhost: remove avail_event arg from vhost_update_avail_event()
virtio: drop default for virtio-mem
vdpa: fix use-after-free on vp_vdpa_remove
virtio-blk: Remove BUG_ON() in virtio_queue_rq()
virtio-blk: Don't use MAX_DISCARD_SEGMENTS if max_discard_seg is zero
vhost: fix hung thread due to erroneous iotlb entries
vduse: Fix returning wrong type in vduse_domain_alloc_iova()
vdpa/mlx5: add validation for VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command
vdpa/mlx5: should verify CTRL_VQ feature exists for MQ
vdpa: factor out vdpa_set_features_unlocked for vdpa internal use
virtio_console: break out of buf poll on remove
virtio: document virtio_reset_device
virtio: acknowledge all features before access
virtio: unexport virtio_finalize_features
Unfortunately, we ended up merging an old version of the patch "fix info
leak with DMA_FROM_DEVICE" instead of merging the latest one. Christoph
(the swiotlb maintainer), he asked me to create an incremental fix
(after I have pointed this out the mix up, and asked him for guidance).
So here we go.
The main differences between what we got and what was agreed are:
* swiotlb_sync_single_for_device is also required to do an extra bounce
* We decided not to introduce DMA_ATTR_OVERWRITE until we have exploiters
* The implantation of DMA_ATTR_OVERWRITE is flawed: DMA_ATTR_OVERWRITE
must take precedence over DMA_ATTR_SKIP_CPU_SYNC
Thus this patch removes DMA_ATTR_OVERWRITE, and makes
swiotlb_sync_single_for_device() bounce unconditionally (that is, also
when dir == DMA_TO_DEVICE) in order do avoid synchronising back stale
data from the swiotlb buffer.
Let me note, that if the size used with dma_sync_* API is less than the
size used with dma_[un]map_*, under certain circumstances we may still
end up with swiotlb not being transparent. In that sense, this is no
perfect fix either.
To get this bullet proof, we would have to bounce the entire
mapping/bounce buffer. For that we would have to figure out the starting
address, and the size of the mapping in
swiotlb_sync_single_for_device(). While this does seem possible, there
seems to be no firm consensus on how things are supposed to work.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: ddbd89deb7 ("swiotlb: fix info leak with DMA_FROM_DEVICE")
Cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Similarly to what was earlier done for other Nyan variants, move the eDP
panel on the FHD models to the AUX bus as well.
Suggested-by: Dmitry Osipenko <digetx@gmail.com>
Fixes: ef6fb9875c ("ARM: tegra: Add device-tree for 1080p version of Nyan Big")
Signed-off-by: Thierry Reding <treding@nvidia.com>
The mitigations for Spectre-BHB are only applied when an exception is
taken from user-space. The mitigation status is reported via the spectre_v2
sysfs vulnerabilities file.
When unprivileged eBPF is enabled the mitigation in the exception vectors
can be avoided by an eBPF program.
When unprivileged eBPF is enabled, print a warning and report vulnerable
via the sysfs vulnerabilities file.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
The root of the problem is that we are selecting symbols that have
dependencies. This can cause random configurations that can fail.
The cleanest solution is to avoid using select.
This driver uses interfaces from the OMAP_GPMC driver so we have to
depend on it instead.
Fixes: 4cd335dae3 ("mtd: rawnand: omap2: Prevent invalid configuration and build error")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/linux-mtd/20220219193600.24892-1-rogerq@kernel.org
In FOPEN_DIRECT_IO mode, fuse_file_write_iter() calls
fuse_direct_write_iter(), which normally calls fuse_direct_io(), which then
imports the write buffer with fuse_get_user_pages(), which uses
iov_iter_get_pages() to grab references to userspace pages instead of
actually copying memory.
On the filesystem device side, these pages can then either be read to
userspace (via fuse_dev_read()), or splice()d over into a pipe using
fuse_dev_splice_read() as pipe buffers with &nosteal_pipe_buf_ops.
This is wrong because after fuse_dev_do_read() unlocks the FUSE request,
the userspace filesystem can mark the request as completed, causing write()
to return. At that point, the userspace filesystem should no longer have
access to the pipe buffer.
Fix by copying pages coming from the user address space to new pipe
buffers.
Reported-by: Jann Horn <jannh@google.com>
Fixes: c3021629a0 ("fuse: support splice() reading from fuse device")
Cc: <stable@vger.kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
