- Simplify Zynq Kconfig dependencies
* clk-imx:
clk: imx: Reference preceded by free
clk: imx8mq: Correct the pcie1 sels
clk: imx8mp: Remove the none exist pcie clocks
clk: imx: Fix reparenting of UARTs not associated with stdout
* clk-samsung:
clk: samsung: Remove redundant dev_err calls
clk: exynos7: Mark aclk_fsys1_200 as critical
* clk-zynq:
clk: zynqmp: pll: add set_pll_mode to check condition in zynqmp_pll_enable
clk: zynqmp: move zynqmp_pll_set_mode out of round_rate callback
clk: zynqmp: Drop dependency on ARCH_ZYNQMP
clk: zynqmp: Enable the driver if ZYNQMP_FIRMWARE is selected
* clk-rockchip:
clk: rockchip: drop MODULE_ALIAS from rk3399 clock controller
clk: rockchip: drop parenthesis from ARM || COMPILE_TEST depends
clk: rockchip: add clock controller for rk3568
clk: rockchip: support more core div setting
dt-binding: clock: Document rockchip, rk3568-cru bindings
clk: rockchip: add dt-binding header for rk3568
* clk-uniphier:
clk: uniphier: Fix potential infinite loop
- Use clk_hw pointers in socfpga driver
- Cleanup parent data in qcom clk drivers
* clk-cleanup:
clk: Drop double "if" in clk_core_determine_round_nolock() comment
clk: at91: Trivial typo fixes in the file sama7g5.c
clk: use clk_core_enable_lock() a bit more
* clk-renesas:
clk: renesas: Zero init clk_init_data
clk: renesas: Couple of spelling fixes
clk: renesas: r8a779a0: Add CMT clocks
clk: renesas: r8a7795: Add TMU clocks
clk: renesas: r8a779a0: Add TSC clock
clk: renesas: r8a779a0: Add TMU clocks
clk: renesas: r8a77965: Add DAB clock
clk: renesas: r8a77990: Add DAB clock
* clk-socfpga:
clk: socfpga: remove redundant initialization of variable div
clk: socfpga: arria10: Fix memory leak of socfpga_clk on error return
clk: socfpga: Fix code formatting
clk: socfpga: Convert to s10/agilex/n5x to use clk_hw
clk: socfpga: arria10: convert to use clk_hw
clk: socfpga: use clk_hw_register for a5/c5
* clk-allwinner:
clk: sunxi: Demote non-conformant kernel-doc headers
clk: sunxi-ng: v3s: use sigma-delta modulation for audio-pll
* clk-qcom: (45 commits)
clk: qcom: rpmh: add support for SDX55 rpmh IPA clock
clk: qcom: gcc-sdm845: get rid of the test clock
clk: qcom: convert SDM845 Global Clock Controller to parent_data
dt-bindings: clock: separate SDM845 GCC clock bindings
clk: qcom: apss-ipq-pll: Add missing MODULE_DEVICE_TABLE
clk: qcom: a53-pll: Add missing MODULE_DEVICE_TABLE
clk: qcom: a7-pll: Add missing MODULE_DEVICE_TABLE
clk: qcom: gcc-sm8350: use ARRAY_SIZE instead of specifying num_parents
clk: qcom: gcc-sm8250: use ARRAY_SIZE instead of specifying num_parents
clk: qcom: gcc-sm8150: use ARRAY_SIZE instead of specifying num_parents
clk: qcom: gcc-sc8180x: use ARRAY_SIZE instead of specifying num_parents
clk: qcom: gcc-sc7180: use ARRAY_SIZE instead of specifying num_parents
clk: qcom: videocc-sm8250: use parent_hws where possible
clk: qcom: videocc-sm8150: use parent_hws where possible
clk: qcom: gpucc-sm8250: use parent_hws where possible
clk: qcom: gpucc-sm8150: use parent_hws where possible
clk: qcom: gcc-sm8350: use parent_hws where possible
clk: qcom: gcc-sm8250: use parent_hws where possible
clk: qcom: gcc-sm8150: use parent_hws where possible
clk: qcom: gcc-sdx55: use parent_hws where possible
...
Vendor listed for mediatek in kernel vendor file 'vendor-prefixes.yaml'
contains 'mediatek' as a valid vendor string. Some nodes in the device
tree are using an invalid vendor string vfor 'mtk' instead. Fix all of
them in dts file. Update also ralink mt7621 related code to properly
match new strings. Even there are used in the device tree there are
some strings that are not referred anywhere but have been also updated
with new vendor name. These are 'mtk,mt7621-wdt', 'mtk,mt7621-nand',
'mtk,mt7621-mc', and 'mtk,mt7621-cpc'.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20210410055059.13518-4-sergio.paracuellos@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The documentation for this SOC only talks about two
registers regarding to the clocks:
* SYSC_REG_CPLL_CLKCFG0 - provides some information about
boostrapped refclock. PLL and dividers used for CPU and some
sort of BUS.
* SYSC_REG_CPLL_CLKCFG1 - a banch of gates to enable/disable
clocks for all or some ip cores.
Looking into driver code, and some openWRT patched there are
another frequencies which are used in some drivers (uart, sd...).
According to all of this information the clock plan for this
SoC is set as follows:
- Main top clock "xtal" from where all the rest of the world is
derived.
- CPU clock "cpu" derived from "xtal" frequencies and a bunch of
register reads and predividers.
- BUS clock "bus" derived from "cpu" and with (cpu / 4) MHz.
- Fixed clocks from "xtal":
* "50m": 50 MHz.
* "125m": 125 MHz.
* "150m": 150 MHz.
* "250m": 250 MHz.
* "270m": 270 MHz.
We also have a buch of gate clocks with their parents:
* "hsdma": "150m"
* "fe": "250m"
* "sp_divtx": "270m"
* "timer": "50m"
* "pcm": "270m"
* "pio": "50m"
* "gdma": "bus"
* "nand": "125m"
* "i2c": "50m"
* "i2s": "270m"
* "spi": "bus"
* "uart1": "50m"
* "uart2": "50m"
* "uart3": "50m"
* "eth": "50m"
* "pcie0": "125m"
* "pcie1": "125m"
* "pcie2": "125m"
* "crypto": "250m"
* "shxc": "50m"
With this information the clk driver will provide clock and gates
functionality from a a set of hardcoded clocks allowing to define
a nice device tree without fixed clocks.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20210410055059.13518-2-sergio.paracuellos@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The for-loop iterates with a u8 loop counter i and compares this
with the loop upper limit of num_parents that is an int type.
There is a potential infinite loop if num_parents is larger than
the u8 loop counter. Fix this by making the loop counter the same
type as num_parents. Also make num_parents an unsigned int to
match the return type of the call to clk_hw_get_num_parents.
Addresses-Coverity: ("Infinite loop")
Fixes: 734d82f4a6 ("clk: uniphier: add core support code for UniPhier clock driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20210409090104.629722-1-colin.king@canonical.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Pull Rockchip clk driver updates from Heiko Stuebner:
- Support for the clock controller on the new rk3568
- Some cleanups for rk3399 modularization
* tag 'v5.13-rockchip-clocks' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: drop MODULE_ALIAS from rk3399 clock controller
clk: rockchip: drop parenthesis from ARM || COMPILE_TEST depends
clk: rockchip: add clock controller for rk3568
clk: rockchip: support more core div setting
dt-binding: clock: Document rockchip, rk3568-cru bindings
clk: rockchip: add dt-binding header for rk3568
Pull Samsung clk driver updates from Sylwester Nawrocki:
- clean up of redundant dev_err() calls after dev_ioremap_resource()
- fix for the clk-exynos7 driver (part of upcoming Galaxy S6 device
support)
* tag 'clk-v5.13-samsung' of https://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk:
clk: samsung: Remove redundant dev_err calls
clk: exynos7: Mark aclk_fsys1_200 as critical
Pull i.MX clk driver updates from Abel Vesa:
- Fix reparenting of UART clocks by initializing only the ones
associated to stdout
- Correct the PCIE clocks for i.MX8MP and i.MX8MQ
- Make LPCG and SCU clocks return on registering failure
* tag 'clk-imx-5.13' of https://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux:
clk: imx: Reference preceded by free
clk: imx8mq: Correct the pcie1 sels
clk: imx8mp: Remove the none exist pcie clocks
clk: imx: Fix reparenting of UARTs not associated with stdout
If there is a IOCTL_SET_PLL_FRAC_MODE request sent to ATF ever,
we shouldn't skip invoking PM_CLOCK_ENABLE fn even though this
pll has been enabled. In ATF implementation, it will only assign
the mode to the variable (struct pm_pll *)pll->mode when handling
IOCTL_SET_PLL_FRAC_MODE call. Invoking PM_CLOCK_ENABLE can force
ATF send request to PWU to set the pll mode to PLL's register.
There is a scenario that happens in enabling VPLL_INT(clk_id:96):
1) VPLL_INT has been enabled during booting.
2) A driver calls clk_set_rate and according to the rate, the VPLL_INT
should be set to FRAC mode. Then zynqmp_pll_set_mode is called
to pass IOCTL_SET_PLL_FRAC_MODE to ATF. Note that at this point
ATF just stores the mode to a variable.
3) This driver calls clk_prepare_enable and zynqmp_pll_enable is
called to try to enable VPLL_INT pll. Because of 1), the function
zynqmp_pll_enable just returns without doing anything after checking
that this pll has been enabled.
In the scenario above, the pll mode of VPLL_INT will never be set
successfully. So adding set_pll_mode to check condition to fix it.
Fixes: 3fde0e16d0 ("drivers: clk: Add ZynqMP clock driver")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20210406153131.601701-1-quanyang.wang@windriver.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
