There is no need to directly skip over to the SCROLL_REDRAW case while
the logo is still shown.
When using DRM, this change has no effect because the code will reach
the SCROLL_REDRAW case immediately anyway.
But if you run an accelerated fbdev driver and have
FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION enabled, console scrolling is
slowed down by factors so that it feels as if you use a 9600 baud
terminal.
So, drop those unnecessary checks and speed up fbdev console
acceleration during bootup.
Cc: stable@vger.kernel.org # v5.10+
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YpkYxk7wsBPx3po+@p100
Since the driver already needs to support multiple sets of ops, we can
drop the mid-layer used by the A83T and H3 PHYs. They share only a small
amount of code; factor this out as sun8i_hdmi_phy_set_polarity.
For clarity, this commit keeps the existing function order.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220615045543.62813-6-samuel@sholland.org
The driver uses crypto hash functions so it needs to select CRYPTO_HASH.
This fixes build errors:
drivers/gpu/drm/bridge/ite-it6505.o: in function `it6505_hdcp_wait_ksv_list':
ite-it6505.c:(.text+0x4c26): undefined reference to `crypto_alloc_shash'
ite-it6505.c:(.text+0x4c6d): undefined reference to `crypto_shash_digest'
ite-it6505.c:(.text+0x4c7d): undefined reference to `crypto_destroy_tfm'
ite-it6505.c:(.text+0x4d69): undefined reference to `crypto_destroy_tfm'
Fixes: b5c84a9edc ("drm/bridge: add it6505 driver")
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613150653.1310029-1-zhengbin13@huawei.com
While parsing the DT, the anx7625 driver checks for the presence of a
panel bridge on endpoint 1. If it is missing, pdata->panel_bridge stores
the error pointer and the function returns successfully without first
cleaning that variable. This is an issue since other functions later
check for the presence of a panel bridge by testing the trueness of that
variable.
In order to ensure proper behavior, zero out pdata->panel_bridge before
returning when no panel bridge is found.
Fixes: 9e82ea0fb1 ("drm/bridge: anx7625: switch to devm_drm_of_get_bridge")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613163705.1531721-1-nfraprado@collabora.com
This reverts commit fa0e256450. The kernel
test robot reported that attempting to build the vesafb driver fails on
some architectures, because these don't define a `struct screen_info`.
This leads to linking errors, for example on parisc with allyesconfig:
hppa-linux-ld: drivers/video/fbdev/vesafb.o: in function `vesafb_probe':
>> (.text+0x738): undefined reference to `screen_info'
>> hppa-linux-ld: (.text+0x73c): undefined reference to `screen_info'
hppa-linux-ld: drivers/firmware/sysfb.o: in function `sysfb_init':
>> (.init.text+0x28): undefined reference to `screen_info'
>> hppa-linux-ld: (.init.text+0x30): undefined reference to `screen_info'
hppa-linux-ld: (.init.text+0x78): undefined reference to `screen_info'
The goal of commit fa0e256450 ("fbdev: vesafb: Allow to be built if
COMPILE_TEST is enabled") was to have more build coverage for the driver
but it wrongly assumed that all architectures would define a screen_info.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220610085450.1341880-1-javierm@redhat.com
The CTA Data Block Collection is valid only for CTA extension version
3. In versions 1 and 2, it is a reserved block, which we ignore.
The DTD start offset (byte 2, or d in CTA-861 spec), which determines
the CTA Data Block Collection size, is specified slightly differently
for different versions:
Version 1:
d = offset for the byte following the reserved data block. If no
data is provided in the reserved data block, then d=4. If no DTDs
are provided, then d=0
Version 2:
d = offset for the byte following the reserved data block. If no
data is provided in the reserved data block, then d=4. If d=0, then
no detailed timing descriptors are provided, and no data is provided
in the reserved data block.
Version 3:
d = offset for the byte following the data block collection. If no
data is provided in the data block collection, then d=4. If d=0,
then no detailed timing descriptors are provided, and no data is
provided in the data block collection.
Ever since commit 9e50b9d55e ("drm: edid: Add some bounds checking"),
we've interpreted 0 to mean there are no DTDs but it's all Data
Blocks. Per the spec, Data Blocks are only valid for version 3, where we
should interpret 0 to mean there are no data blocks.
Follow the spec (and hope the EDIDs follow it too).
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2a4c94417f024cbafc5d4ca0a74e4617fc4325d1.1654674560.git.jani.nikula@intel.com
Currently, the memory to the composition frame is being allocated using
the kzmalloc. This comes with the limitation of maximum size of one
page size(which in the x86_64 is 4Kb and 4MB for default and hugepage
respectively).
Somes test of igt (e.g. kms_plane@pixel-format) uses more than 4MB when
testing some pixel formats like ARGB16161616 and the following error were
showing up when running kms_plane@plane-panning-bottom-right*:
[drm:vkms_composer_worker [vkms]] *ERROR* Cannot allocate memory for
output frame.
This problem is addessed by allocating the memory using kvzalloc that
circunvents this limitation.
V5: Improve the commit message and drop the debugging issues in VKMS
TO-DO(Melissa Wen).
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Igor Torrente <igormtorrente@gmail.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220404204515.42144-2-igormtorrente@gmail.com
Commit 680532c50b ("drm: adv7511: Add support for
i2c_new_secondary_device") allows a device tree node to override
the default addresses of the secondary i2c devices. This is useful
for solving address conflicts on the i2c bus.
In adv7511_init_cec_regmap() the new i2c address of cec device is
read from device tree and immediately accessed, well before it is
written in the proper register to override the default address.
This can cause an i2c error during probe and a consequent probe
failure.
Once the new i2c address is read from the device tree, override
the default address before any attempt to access the cec.
Tested with adv7533 and stm32mp157f.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Fixes: 680532c50b ("drm: adv7511: Add support for i2c_new_secondary_device")
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220607213144.427177-1-antonio.borneo@foss.st.com
Introduces a driver for the LogiCVC display controller, a programmable
logic controller optimized for use in Xilinx Zynq-7000 SoCs and other
Xilinx FPGAs. The controller is mostly configured at logic synthesis
time so only a subset of configuration is left for the driver to
handle.
The following features are implemented and tested:
- LVDS 4-bit interface;
- RGB565 pixel formats;
- Multiple layers and hardware composition;
- Layer-wide alpha mode;
The following features are implemented but untested:
- Other RGB pixel formats;
- Layer framebuffer configuration for version 4;
- Lowest-layer used as background color;
- Per-pixel alpha mode.
The following features are not implemented:
- YUV pixel formats;
- DVI, LVDS 3-bit, ITU656 and camera link interfaces;
- External parallel input for layer;
- Color-keying;
- LUT-based alpha modes.
Additional implementation-specific notes:
- Panels are only enabled after the first page flip to avoid flashing a
white screen.
- Depth used in context of the LogiCVC driver only counts color components
to match the definition of the synthesis parameters.
Support is implemented for both version 3 and 4 of the controller.
With version 3, framebuffers are stored in a dedicated contiguous
memory area, with a base address hardcoded for each layer. This requires
using a dedicated CMA pool registered at the base address and tweaking a
few offset-related registers to try to use any buffer allocated from
the pool. This is done on a best-effort basis to have the hardware cope
with the DRM framebuffer allocation model and there is no guarantee
that each buffer allocated by GEM CMA can be used for any layer.
In particular, buffers allocated below the base address for a layer are
guaranteed not to be configurable for that layer. See the implementation of
logicvc_layer_buffer_find_setup for specifics.
Version 4 allows configuring each buffer address directly, which
guarantees that any buffer can be configured.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220520141555.1429041-2-paul.kocialkowski@bootlin.com
The platform devices registered by sysfb match with firmware-based DRM or
fbdev drivers, that are used to have early graphics using a framebuffer
provided by the system firmware.
DRM or fbdev drivers later are probed and remove conflicting framebuffers,
leading to these platform devices for generic drivers to be unregistered.
But the current solution has a race, since the sysfb_init() function could
be called after a DRM or fbdev driver is probed and request to unregister
the devices for drivers with conflicting framebuffes.
To prevent this, disable any future sysfb platform device registration by
calling sysfb_disable(), if a driver requests to remove the conflicting
framebuffers.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220607182338.344270-4-javierm@redhat.com
