mirrors/linux
2
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2026-05-09 03:10:30 -04:00
Code Issues Packages Projects Releases Wiki Activity
1,185,257 Commits 1 Branch 929 Tags
38218822a72fd31e89affc7fc457d527f65581aa
Commit Graph

1185257 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Stephan Gerhold
38218822a7 arm64: dts: qcom: pm8916: Move default regulator "-supply"s 
Some of the power supplies for the analog audio codec in PM8916 are
wired externally. While most boards use the regulators currently
specified in pm8916.dtsi, in theory it could be connected differently.

We already have msm8916-pm8916.dtsi that models that standard setup
used by most devices so move the -supply properties there and keep
the base pm8916.dtsi independent.

Currently all MSM8916 boards in mainline make use of
msm8916-pm8916.dtsi, so it is not necessary to adjust any other boards.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230510-msm8916-regulators-v1-5-54d4960a05fc@gerhold.net
 2023-05-24 21:50:47 -07:00
Stephan Gerhold
a5cf21b146 arm64: dts: qcom: msm8916: Disable audio codecs by default 
Not every device has something connected to the digital audio codec
in MSM8916 and/or the analog audio codec in PM8916. Disable those by
default so the hardware is only powered up when necessary.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230510-msm8916-regulators-v1-4-54d4960a05fc@gerhold.net
 2023-05-24 21:50:47 -07:00
Stephan Gerhold
355750828c arm64: dts: qcom: msm8916: Fix regulator constraints 
The regulator constraints for most MSM8916 devices (except DB410c) were
originally taken from Qualcomm's msm-3.10 vendor device tree (for lack
of better documentation). Unfortunately it turns out that Qualcomm's
voltages are slightly off as well and do not match the voltage
constraints applied by the RPM firmware.

This means that we sometimes request a specific voltage but the RPM
firmware actually applies a much lower or higher voltage. This is
particularly critical for pm8916_l11 which is used as SD card VMMC
regulator: The SD card can choose a voltage from the current range of
1.8 - 2.95V. If it chooses to run at 1.8V we pretend that this is fine
but the RPM firmware will still silently end up configuring 2.95V.
This can be easily reproduced with a multimeter or by checking the
SPMI hardware registers of the regulator.

Fix this by making the voltages match the actual "specified range" in
the PM8916 Device Specification which is enforced by the RPM firmware.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230510-msm8916-regulators-v1-3-54d4960a05fc@gerhold.net
 2023-05-24 21:50:47 -07:00
Stephan Gerhold
5500f823db arm64: dts: qcom: apq8016-sbc: Fix 1.8V power rail on LS expansion 
The 96Boards specification expects a 1.8V power rail on the low-speed
expansion connector that is able to provide at least 0.18W / 100 mA.
According to the DB410c hardware user manual this is done by connecting
both L15 and L16 in parallel with up to 55mA each (for 110 mA total) [1].

Unfortunately the current regulator setup in the DB410c device tree
does not implement the specification correctly and only provides 5 mA:

  - Only L15 is marked always-on, so L16 is never enabled.
  - Without specifying a load the regulator is put into LPM where
    it can only provide 5 mA.

Fix this by:

  - Adding proper voltage constraints for L16.
  - Making L16 always-on.
  - Adding regulator-system-load for both L15 and L16. 100 mA should be
    available in total, so specify 50 mA for each. (The regulator
    hardware can only be in normal (55 mA) or low-power mode (5 mA) so
    this will actually result in the expected 110 mA total...)

[1]: https://www.96boards.org/documentation/consumer/dragonboard/dragonboard410c/hardware-docs/hardware-user-manual.md.html#power-supplies

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: 828dd5d66f ("arm64: dts: apq8016-sbc: make 1.8v available on LS expansion")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230510-msm8916-regulators-v1-2-54d4960a05fc@gerhold.net
 2023-05-24 21:50:47 -07:00
Stephan Gerhold
e27654df20 arm64: dts: qcom: apq8016-sbc: Fix regulator constraints 
For some reason DB410c has completely bogus regulator constraints that
actually just correspond to the programmable voltages which are already
provided by the regulator driver. Some of them are not just outside the
recommended operating conditions of the APQ8016E SoC but even exceed
the absolute maximum ratings, potentially risking permanent device
damage.

In practice it's not quite as dangerous thanks to the RPM firmware:
It turns out that it has its own voltage constraints and silently
clamps all regulator requests. For example, requesting 3.3V for L5
(allowed by the current regulator constraints!) still results in 1.8V
being programmed in the actual regulator hardware.

Experimentation with various voltages shows that the internal RPM
voltage constraints roughly correspond to the safe "specified range"
in the PM8916 Device Specification (rather than the "programmable
range" used inside apq8016-sbc.dtsi right now).

Combine those together with some fixed voltages used in the old
msm-3.10 device tree from Qualcomm to give DB410c some actually valid
voltage constraints.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: 4c7d53d16d ("arm64: dts: apq8016-sbc: add regulators support")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230510-msm8916-regulators-v1-1-54d4960a05fc@gerhold.net
 2023-05-24 21:50:47 -07:00
Jianhua Lu
05860f678c arm64: dts: qcom: sm8250-xiaomi-elish: remove redundant empty line 
Remove a redundant empty line introduced by
  commit 51c4c2bd6f ("arm64: dts: qcom: sm8250-xiaomi-elish-boe: Add mdss and dsi panel")

Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230517133340.21111-1-lujianhua000@gmail.com
 2023-05-24 21:50:47 -07:00
Kathiravan T
9ef4264050 arm64: dts: qcom: ipq9574: add few device nodes 
Add QUP(SPI / I2C) peripheral, PRNG, WDOG and the remaining UART nodes.
While at it, enable the SPI NOR in RDP433 board.

Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230517072806.13170-1-quic_kathirav@quicinc.com
 2023-05-24 21:50:47 -07:00
Krzysztof Kozlowski
fdb0038e96 arm64: dts: qcom: sm8550-qrd: add display and panel 
Enable Display Subsystem with Visionox VTDR6130 Panel (same as on
MTP8550).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516154539.238655-3-krzysztof.kozlowski@linaro.org
 2023-05-24 21:50:47 -07:00
Krzysztof Kozlowski
fbeffa580e arm64: dts: qcom: sm8550-mtp: drop redundant MDP status 
MDP in sm8550.dtsi is not disabled (although its parent MDSS is), so
board DTS does not have to enable it.

Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516154539.238655-2-krzysztof.kozlowski@linaro.org
 2023-05-24 21:50:47 -07:00
Krzysztof Kozlowski
5ef00c06ea arm64: dts: qcom: sm8550: enable DISPCC by default 
Enable the Display Clock Controller by default in SoC DTSI so unused
clocks can be turned off.  It does not require any external resources,
so as core SoC component should be always available to boards.

Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516154539.238655-1-krzysztof.kozlowski@linaro.org
 2023-05-24 21:50:47 -07:00
Krzysztof Kozlowski
a158f00cdf arm64: dts: qcom: sm8550-qrd: add flash LEDs 
Enable PM8550 PMIC flash LED controller and add two flash LEDs using
four current outputs.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516150202.188655-3-krzysztof.kozlowski@linaro.org
 2023-05-24 21:50:47 -07:00
Krzysztof Kozlowski
cf51d2be05 arm64: dts: qcom: pm8550: add flash LED controller 
Add node for PM8550 PMIC flash LED controller.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516150202.188655-2-krzysztof.kozlowski@linaro.org
 2023-05-24 21:50:47 -07:00
Luca Weiss
fbd47f83c5 arm64: dts: qcom: sm6350: Move wifi node to correct place 
Somehow wifi was placed further up in the file than where it should be.
Move it down so the nodes are sorted by reg again.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516-sm6350-order-v1-1-5c3b7c4cd761@fairphone.com
 2023-05-24 21:50:47 -07:00
Konrad Dybcio
ec8bb9c5b1 arm64: dts: qcom: sm8450: Add missing RPMhPD OPP levels 
We need more granularity for things like the GPU. Add the missing levels.

This unfortunately requires some re-indexing, resulting in an ugly diff.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516005306.952821-1-konrad.dybcio@linaro.org
 2023-05-24 21:50:46 -07:00
Nikita Travkin
4a9f8f8f2a arm64: dts: qcom: Add Acer Aspire 1 
Acer Aspire 1 is a WoA laptop based on Snapdragon 7c gen1 platform.

The laptop design is similar to trogdor in the choice of primary
components but the specifics on usage of those differ slightly.

Add the devicetree for the laptop with support for most of the
hardware present.

Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230515093744.289045-5-nikita@trvn.ru
 2023-05-24 21:50:46 -07:00
Nikita Travkin
aaffd36411 dt-bindings: arm: qcom: Add Acer Aspire 1 
Acer Aspire 1 is a laptop based on sc7180. Document it's compatible.

Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230515093744.289045-4-nikita@trvn.ru
 2023-05-24 21:50:46 -07:00
Nikita Travkin
39238382c4 arm64: dts: qcom: sc7180: Drop redundant disable in mdp 
mdss is useless without a display controller which makes explicitly
enabling mdp redundant. Have it enabled by default to drop the extra
node for all users.

Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230515093744.289045-3-nikita@trvn.ru
 2023-05-24 21:50:46 -07:00
Nikita Travkin
43926a3cb1 arm64: dts: qcom: sc7180: Don't enable lpass clocks by default 
lpass clocks are usually blocked from HLOS by the firmware and
instead are managed by the ADSP. Mark them as reserved and explicitly
enable in the CrOS boards that have special, cooperative firmware.

The IDP board gets lpass clocks disabled as it doesn't make use of sound
anyway and might use Qualcomm firmware that blocks those clocks. [1]

[1] https://lore.kernel.org/all/ZBJhmDd3zK%2FAiwBD@google.com/

Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230515093744.289045-2-nikita@trvn.ru
 2023-05-24 21:50:46 -07:00
Krzysztof Kozlowski
a541667c86 arm64: dts: qcom: sm8550-mtp: add WCD9385 audio-codec 
Add Qualcomm Aqstic WCD9385 audio codec on two Soundwire interfaces: RX
and TX.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230512160452.206585-2-krzysztof.kozlowski@linaro.org
 2023-05-24 21:50:46 -07:00
Krzysztof Kozlowski
83fae950c9 arm64: dts: qcom: sm8550-qrd: add WCD9385 audio-codec 
Add Qualcomm Aqstic WCD9385 audio codec on two Soundwire interfaces: RX
and TX.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230512160452.206585-1-krzysztof.kozlowski@linaro.org
 2023-05-24 21:50:46 -07:00
Yang Xiwen
06a9f50c20 arm64: dts: qcom: msm8916-ufi: make UDC dual mode 
It's possible to use this device with a (non-standard) hub to get USB
working in host mode, but dr_mode="peripheral" prevents the UDC to
do so.
Remove dr_mode="peripheral" and add usb-role-switch so that it defaults
to otg mode and can be switched to host mode in userspace.

Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/TYZPR04MB632102315884225B7343533B96729@TYZPR04MB6321.apcprd04.prod.outlook.com
 2023-05-24 21:50:46 -07:00
Luca Weiss
a5317b23fe arm64: dts: qcom: msm8953: Add BLSP DMAs for I2C 
MSM8953 has two DMA controllers for the various I2C, SPI and UART
busses. Add the nodes and configure all the I2C nodes so that the driver
can use the DMA.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230422-msm8953-blsp-dma-v1-1-0024801bb587@z3ntu.xyz
 2023-05-24 21:50:46 -07:00
Luca Weiss
5a60e72c3e arm64: dts: qcom: pm8953: add GPIOs 
Add a node for the GPIOs found on the pm8953.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230421-pm8953-gpio-v1-3-3d33e2de47e3@z3ntu.xyz
 2023-05-24 21:50:46 -07:00
Krzysztof Kozlowski
188e26bc67 arm64: dts: qcom: sm6125: add unit address to soc node 
"soc" node is supposed to have unit address:

Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230420063610.11068-7-krzysztof.kozlowski@linaro.org
 2023-05-24 21:50:46 -07:00
Krzysztof Kozlowski
cefb40777a arm64: dts: qcom: sdm630: add unit address to soc node 
"soc" node is supposed to have unit address:

  Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230420063610.11068-6-krzysztof.kozlowski@linaro.org
 2023-05-24 21:50:46 -07:00
Krzysztof Kozlowski
77462beddb arm64: dts: qcom: msm8998: add unit address to soc node 
"soc" node is supposed to have unit address:

  Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230420063610.11068-5-krzysztof.kozlowski@linaro.org
 2023-05-24 21:50:46 -07:00
Krzysztof Kozlowski
b67f5c337f arm64: dts: qcom: msm8996: add unit address to soc node 
"soc" node is supposed to have unit address:

  Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230420063610.11068-4-krzysztof.kozlowski@linaro.org
 2023-05-24 21:50:46 -07:00
Krzysztof Kozlowski
f7fd546dd6 arm64: dts: qcom: msm8994: add unit address to soc node 
"soc" node is supposed to have unit address:

  Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230420063610.11068-3-krzysztof.kozlowski@linaro.org
 2023-05-24 21:50:46 -07:00
Krzysztof Kozlowski
da6aa1111a arm64: dts: qcom: ipq8074: add unit address to soc node 
"soc" node is supposed to have unit address:

  Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230420063610.11068-2-krzysztof.kozlowski@linaro.org
 2023-05-24 21:50:46 -07:00
Krzysztof Kozlowski
393595d4ff arm64: dts: qcom: ipq6018: add unit address to soc node 
"soc" node is supposed to have unit address:

  Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230420063610.11068-1-krzysztof.kozlowski@linaro.org
 2023-05-24 21:50:45 -07:00
Krzysztof Kozlowski
4a0156b886 arm64: dts: qcom: sdm845-polaris: add missing touchscreen child node reg 
Add missing reg property to touchscreen child node to fix dtbs W=1 warnings:

  Warning (unit_address_vs_reg): /soc@0/geniqup@ac0000/i2c@a98000/touchscreen@20/rmi4-f12@12: node has a unit name, but no reg or ranges property

Fixes: be497abe19 ("arm64: dts: qcom: Add support for Xiaomi Mi Mix2s")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Molly Sophia <mollysophia379@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-18-krzysztof.kozlowski@linaro.org
 2023-05-24 21:50:45 -07:00
Krzysztof Kozlowski
950a4fe6ec arm64: dts: qcom: sm8550: correct pinctrl unit address 
Match unit-address to reg entry to fix dtbs W=1 warnings:

  Warning (simple_bus_reg): /soc@0/pinctrl@f000000: simple-bus unit address format error, expected "f100000"

Fixes: ffc50b2d38 ("arm64: dts: qcom: Add base SM8550 dtsi")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-17-krzysztof.kozlowski@linaro.org
 2023-05-24 21:50:45 -07:00
Krzysztof Kozlowski
3cbf49ef16 arm64: dts: qcom: sm8550: correct crypto unit address 
Match unit-address to reg entry to fix dtbs W=1 warnings:

  Warning (simple_bus_reg): /soc@0/crypto@1de0000: simple-bus unit address format error, expected "1dfa000"

Fixes: 433477c3bf ("arm64: dts: qcom: sm8550: add QCrypto nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-16-krzysztof.kozlowski@linaro.org
 2023-05-24 21:50:45 -07:00
Krzysztof Kozlowski
a560ab70c6 arm64: dts: qcom: sm8350: correct USB phy unit address 
Match unit-address to reg entry to fix dtbs W=1 warnings:

  Warning (simple_bus_reg): /soc@0/phy@88e9000: simple-bus unit address format error, expected "88e8000"

Fixes: 2458a305e8 ("arm64: dts: qcom: sm8350: switch to combo usb3/dp phy")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-15-krzysztof.kozlowski@linaro.org
 2023-05-24 21:50:45 -07:00
Krzysztof Kozlowski
ab98c21bc9 arm64: dts: qcom: sm8350: correct PCI phy unit address 
Match unit-address to reg entry to fix dtbs W=1 warnings:

  Warning (simple_bus_reg): /soc@0/phy@1c0f000: simple-bus unit address format error, expected "1c0e000"

Fixes: 6daee40678 ("arm64: dts: qcom: sm8350: add PCIe devices")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-14-krzysztof.kozlowski@linaro.org
 2023-05-24 21:50:45 -07:00
Krzysztof Kozlowski
41d6bca799 arm64: dts: qcom: sm8350: correct DMA controller unit address 
Match unit-address to reg entry to fix dtbs W=1 warnings:

  Warning (simple_bus_reg): /soc@0/dma-controller@900000: simple-bus unit address format error, expected "9800000"

Fixes: bc08fbf49b ("arm64: dts: qcom: sm8350: Define GPI DMA engines")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-13-krzysztof.kozlowski@linaro.org
 2023-05-24 21:50:45 -07:00
Krzysztof Kozlowski
2358b43256 arm64: dts: qcom: sm6115: correct thermal-sensor unit address 
Match unit-address to reg entry to fix dtbs W=1 warnings:

  Warning (simple_bus_reg): /soc@0/thermal-sensor@4410000: simple-bus unit address format error, expected "4411000"

Fixes: 7b74cba6b1 ("arm64: dts: qcom: sm6115: Add TSENS node")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-12-krzysztof.kozlowski@linaro.org
 2023-05-24 21:50:45 -07:00
Krzysztof Kozlowski
a05b913a27 arm64: dts: qcom: sdm845: correct camss unit address 
Match unit-address to reg entry to fix dtbs W=1 warnings:

  Warning (simple_bus_reg): /soc@0/camss@a00000: simple-bus unit address format error, expected "acb3000"

Fixes: d48a6698a6 ("arm64: dts: qcom: sdm845: Add CAMSS ISP node")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-11-krzysztof.kozlowski@linaro.org
 2023-05-24 21:50:45 -07:00
Krzysztof Kozlowski
c8b7faa7e9 arm64: dts: qcom: sdm630: correct camss unit address 
Match unit-address to reg entry to fix dtbs W=1 warnings:

  Warning (simple_bus_reg): /soc/camss@ca00000: simple-bus unit address format error, expected "ca00020"

Fixes: f3d5d3cc69 ("arm64: dts: qcom: sdm630: Configure the camera subsystem")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-10-krzysztof.kozlowski@linaro.org
 2023-05-24 21:50:45 -07:00
Krzysztof Kozlowski
e959ced1d0 arm64: dts: qcom: msm8996: correct camss unit address 
Match unit-address to reg entry to fix dtbs W=1 warnings:

  Warning (simple_bus_reg): /soc/camss@a00000: simple-bus unit address format error, expected "a34000"

Fixes: e0531312e7 ("arm64: dts: qcom: msm8996: Add CAMSS support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-9-krzysztof.kozlowski@linaro.org
 2023-05-24 21:50:45 -07:00
Krzysztof Kozlowski
24f0f6a805 arm64: dts: qcom: msm8994: correct SPMI unit address 
Match unit-address to reg entry to fix dtbs W=1 warnings:

  Warning (simple_bus_reg): /soc/spmi@fc4c0000: simple-bus unit address format error, expected "fc4cf000"

Fixes: b0ad598f8e ("arm64: dts: qcom: msm8994: Add SPMI PMIC arbiter device")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-8-krzysztof.kozlowski@linaro.org
 2023-05-24 21:50:45 -07:00
Krzysztof Kozlowski
80284797a4 arm64: dts: qcom: msm8976: correct MMC unit address 
Match unit-address to reg entry to fix dtbs W=1 warnings:

  Warning (simple_bus_reg): /soc@0/mmc@7824000: simple-bus unit address format error, expected "7824900"
  Warning (simple_bus_reg): /soc@0/mmc@7864000: simple-bus unit address format error, expected "7864900"
  Warning (simple_bus_reg): /soc@0/mmc@7a24000: simple-bus unit address format error, expected "7a24900"

Fixes: 0484d3ce09 ("arm64: dts: qcom: Add DTS for MSM8976 and MSM8956 SoCs")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-7-krzysztof.kozlowski@linaro.org
 2023-05-24 21:50:45 -07:00
Krzysztof Kozlowski
751038676e arm64: dts: qcom: msm8953: correct WCNSS unit address 
Match unit-address to reg entry to fix dtbs W=1 warnings:

  Warning (simple_bus_reg): /soc@0/remoteproc@a21b000: simple-bus unit address format error, expected "a204000"

Fixes: b12428640e ("arm64: dts: MSM8953: Add wcnss nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-6-krzysztof.kozlowski@linaro.org
 2023-05-24 21:50:45 -07:00
Krzysztof Kozlowski
1c06b93461 arm64: dts: qcom: msm8953: correct IOMMU unit address 
Match unit-address to reg entry to fix dtbs W=1 warnings:

  Warning (simple_bus_reg): /soc@0/iommu@1e00000: simple-bus unit address format error, expected "1e20000"

Fixes: c0b9575a36 ("arm64: dts: qcom: msm8953: add APPS IOMMU")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-5-krzysztof.kozlowski@linaro.org
 2023-05-24 21:50:45 -07:00
Krzysztof Kozlowski
1f9a41bb0b arm64: dts: qcom: msm8916: correct WCNSS unit address 
Match unit-address to reg entry to fix dtbs W=1 warnings:

  Warning (simple_bus_reg): /soc@0/remoteproc@a21b000: simple-bus unit address format error, expected "a204000"

Fixes: 88106096cb ("ARM: dts: msm8916: Add and enable wcnss node")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-4-krzysztof.kozlowski@linaro.org
 2023-05-24 21:50:45 -07:00
Krzysztof Kozlowski
72644bc76d arm64: dts: qcom: msm8916: correct MMC unit address 
Match unit-address to reg entry to fix dtbs W=1 warnings:

  Warning (simple_bus_reg): /soc@0/mmc@7824000: simple-bus unit address format error, expected "7824900"
  Warning (simple_bus_reg): /soc@0/mmc@7864000: simple-bus unit address format error, expected "7864900"

Fixes: c4da5a5616 ("arm64: dts: qcom: Add msm8916 sdhci configuration nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-3-krzysztof.kozlowski@linaro.org
 2023-05-24 21:50:44 -07:00
Krzysztof Kozlowski
48798d992c arm64: dts: qcom: msm8916: correct camss unit address 
Match unit-address to reg entry to fix dtbs W=1 warnings:

  Warning (simple_bus_reg): /soc@0/camss@1b00000: simple-bus unit address format error, expected "1b0ac00"

Fixes: 58f479f90a ("arm64: dts: qcom: msm8916: Add CAMSS support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-2-krzysztof.kozlowski@linaro.org
 2023-05-24 21:50:44 -07:00
Krzysztof Kozlowski
085058786a arm64: dts: qcom: ipq6018: correct qrng unit address 
Match unit-address to reg entry to fix dtbs W=1 warnings:

  Warning (simple_bus_reg): /soc/qrng@e1000: simple-bus unit address format error, expected "e3000"

Fixes: 5bf6356212 ("arm64: dts: ipq6018: Add a few device nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-1-krzysztof.kozlowski@linaro.org
 2023-05-24 21:50:44 -07:00
Arnaud Vrac
935e538fd6 arm64: dts: qcom: msm8998: add blsp spi nodes 
Add pinctrl and qup nodes in msm8998 device tree to support spi.
Values were ported from downstream msm-4.4 kernel.

Signed-off-by: Arnaud Vrac <avrac@freebox.fr>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230417-msm8998-spi-v2-1-b314c6d9ea31@freebox.fr
 2023-05-24 21:50:44 -07:00
Konrad Dybcio
3e459be2a3 arm64: dts: qcom: msm8996-tone: Enable LPG LEDs 
Enable the notification LED(s) wired up to the PMI8994(6) LPG.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230413-tone_led-v1-1-bc3c73393bfa@linaro.org
 2023-05-24 21:50:44 -07:00