The Renesas OS Timer (OSTM) driver contains two probe points, of which
only one should complete:
1. Early probe, using TIMER_OF_DECLARE(), to provide the sole
clocksource on (arm32) RZ/A1 and RZ/A2 SoCs,
2. Normal probe, using a platform driver, to provide additional timers
on (arm64 + riscv) RZ/G2L and similar SoCs.
The latter is needed because using OSTM on RZ/G2L requires manipulation
of its reset signal, which is not yet available at the time of early
probe, causing early probe to fail with -EPROBE_DEFER. It is only
enabled when building a kernel with support for the RZ/G2L family, so it
does not impact RZ/A1 and RZ/A2. Hence only one probe method can
complete on all affected systems.
As relying on the order of initialization of subsystems inside the
kernel is fragile, set the DT node's OF_POPULATED flag after a succesful
early probe. This makes sure the platform driver's probe is never
called after a successful early probe.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviwed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/bd027379713cbaafa21ffe9e848ebb7f475ca0e7.1710930542.git.geert+renesas@glider.be
The RZ/V2H(P) (R9A09G057) SoC is equipped with the Generic Timer Module,
also known as OSTM. Similar to the RZ/G2L SoC, the OSTM on the RZ/V2H(P)
SoC requires the reset line to be deasserted before accessing any
registers.
Early call to ostm_init() happens through TIMER_OF_DECLARE() which always
fails with -EPROBE_DEFER, as resets are not available that early in the
boot process. To address this issue on the RZ/V2H(P) SoC, enable the OSTM
driver to be reprobed through the platform driver probe mechanism.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240322151219.885832-3-prabhakar.mahadev-lad.rj@bp.renesas.com
When doing
make menuconfig
and searching for the CLOCKSOURCE_WATCHDOG_MAX_SKEW_US config item, the
help says:
│ Symbol: CLOCKSOURCE_WATCHDOG_MAX_SKEW_US [=125]
│ Type : integer
│ Range : [50 1000]
│ Defined at kernel/time/Kconfig:204
│ Prompt: Clocksource watchdog maximum allowable skew (in s)
^^^
│ Depends on: GENERIC_CLOCKEVENTS [=y] && CLOCKSOURCE_WATCHDOG [=y]
because on some terminals, it cannot display the 'μ' char, unicode
number 0x3bc.
So simply write it out so that there's no trouble.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20240428102143.26764-1-bp@kernel.org
U64_MAX is not in include/vdso/limits.h, although that isn't noticed on x86
because x86 includes include/linux/limits.h indirectly. However powerpc is
more selective, resulting in the following build error:
In file included from <command-line>:
lib/vdso/gettimeofday.c: In function 'vdso_calc_ns':
lib/vdso/gettimeofday.c:11:33: error: 'U64_MAX' undeclared
11 | # define VDSO_DELTA_MASK(vd) U64_MAX
| ^~~~~~~
Use ULLONG_MAX instead which will work just as well and is in
include/vdso/limits.h.
Fixes: c8e3a8b6f2 ("vdso: Consolidate vdso_calc_delta()")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240409062639.3393-1-adrian.hunter@intel.com
Closes: https://lore.kernel.org/all/20240409124905.6816db37@canb.auug.org.au/
Kernel timekeeping is designed to keep the change in cycles (since the last
timer interrupt) below max_cycles, which prevents multiplication overflow
when converting cycles to nanoseconds. However, if timer interrupts stop,
the clocksource_cyc2ns() calculation will eventually overflow.
Add protection against that. Simplify by folding together
clocksource_delta() and clocksource_cyc2ns() into cycles_to_nsec_safe().
Check against max_cycles, falling back to a slower higher precision
calculation.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240325064023.2997-20-adrian.hunter@intel.com
Kernel timekeeping is designed to keep the change in cycles (since the last
timer interrupt) below max_cycles, which prevents multiplication overflow
when converting cycles to nanoseconds. However, if timer interrupts stop,
the calculation will eventually overflow.
Add protection against that. In timekeeping_cycles_to_ns() calculation,
check against max_cycles, falling back to a slower higher precision
calculation. In timekeeping_forward_now(), process delta in chunks of at
most max_cycles.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240325064023.2997-18-adrian.hunter@intel.com
Kernel timekeeping is designed to keep the change in cycles (since the last
timer interrupt) below max_cycles, which prevents multiplication overflow
when converting cycles to nanoseconds. However, if timer interrupts stop,
the calculation will eventually overflow.
Add protection against that. Select GENERIC_VDSO_OVERFLOW_PROTECT so that
max_cycles is made available in the VDSO data page. Check against
max_cycles, falling back to a slower higher precision calculation. Take
advantage of the opportunity to move masking and negative motion check
into the slow path.
The result is a calculation that has similar performance as before. Newer
machines showed performance benefit, whereas older Skylake-based hardware
such as Intel Kaby Lake was seen <1% worse.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240325064023.2997-9-adrian.hunter@intel.com
Kernel timekeeping is designed to keep the change in cycles (since the last
timer interrupt) below max_cycles, which prevents multiplication overflow
when converting cycles to nanoseconds. However, if timer interrupts stop,
the calculation will eventually overflow.
Add protection against that, enabled by config option
CONFIG_GENERIC_VDSO_OVERFLOW_PROTECT. Check against max_cycles, falling
back to a slower higher precision calculation.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240325064023.2997-8-adrian.hunter@intel.com
Pull x86 fixes from Ingo Molnar:
- Fix MCE timer reinit locking
- Fix/improve CoCo guest random entropy pool init
- Fix SEV-SNP late disable bugs
- Fix false positive objtool build warning
- Fix header dependency bug
- Fix resctrl CPU offlining bug
* tag 'x86-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/retpoline: Add NOENDBR annotation to the SRSO dummy return thunk
x86/mce: Make sure to grab mce_sysfs_mutex in set_bank()
x86/CPU/AMD: Track SNP host status with cc_platform_*()
x86/cc: Add cc_platform_set/_clear() helpers
x86/kvm/Kconfig: Have KVM_AMD_SEV select ARCH_HAS_CC_PLATFORM
x86/coco: Require seeding RNG with RDRAND on CoCo systems
x86/numa/32: Include missing <asm/pgtable_areas.h>
x86/resctrl: Fix uninitialized memory read when last CPU of domain goes offline
Pull timer fixes from Ingo Molnar:
"Fix various timer bugs:
- Fix a timer migration bug that may result in missed events
- Fix timer migration group hierarchy event updates
- Fix a PowerPC64 build warning
- Fix a handful of DocBook annotation bugs"
* tag 'timers-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/migration: Return early on deactivation
timers/migration: Fix ignored event due to missing CPU update
vdso: Use CONFIG_PAGE_SHIFT in vdso/datapage.h
timers: Fix text inconsistencies and spelling
tick/sched: Fix struct tick_sched doc warnings
tick/sched: Fix various kernel-doc warnings
timers: Fix kernel-doc format and add Return values
time/timekeeping: Fix kernel-doc warnings and typos
time/timecounter: Fix inline documentation
Pull x86 perf fix from Ingo Molnar:
"Fix a combined PEBS events bug on x86 Intel CPUs"
* tag 'perf-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/ds: Don't clear ->pebs_data_cfg for the last PEBS event
Pull nfsd fixes from Chuck Lever:
- Address a slow memory leak with RPC-over-TCP
- Prevent another NFS4ERR_DELAY loop during CREATE_SESSION
* tag 'nfsd-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: hold a lighter-weight client reference over CB_RECALL_ANY
SUNRPC: Fix a slow server-side memory leak with RPC-over-TCP
Pull xfs fix from Chandan Babu:
- Allow creating new links to special files which were not associated
with a project quota
* tag 'xfs-6.9-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: allow cross-linking special files without project quota
Pull smb client fixes from Steve French:
- fix to retry close to avoid potential handle leaks when server
returns EBUSY
- DFS fixes including a fix for potential use after free
- fscache fix
- minor strncpy cleanup
- reconnect race fix
- deal with various possible UAF race conditions tearing sessions down
* tag '6.9-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix potential UAF in cifs_signal_cifsd_for_reconnect()
smb: client: fix potential UAF in smb2_is_network_name_deleted()
smb: client: fix potential UAF in is_valid_oplock_break()
smb: client: fix potential UAF in smb2_is_valid_oplock_break()
smb: client: fix potential UAF in smb2_is_valid_lease_break()
smb: client: fix potential UAF in cifs_stats_proc_show()
smb: client: fix potential UAF in cifs_stats_proc_write()
smb: client: fix potential UAF in cifs_dump_full_key()
smb: client: fix potential UAF in cifs_debug_files_proc_show()
smb3: retrying on failed server close
smb: client: serialise cifs_construct_tcon() with cifs_mount_mutex
smb: client: handle DFS tcons in cifs_construct_tcon()
smb: client: refresh referral without acquiring refpath_lock
smb: client: guarantee refcounted children from parent session
cifs: Fix caching to try to do open O_WRONLY as rdwr on server
smb: client: fix UAF in smb2_reconnect_server()
smb: client: replace deprecated strncpy with strscpy
srso_alias_untrain_ret() is special code, even if it is a dummy
which is called in the !SRSO case, so annotate it like its real
counterpart, to address the following objtool splat:
vmlinux.o: warning: objtool: .export_symbol+0x2b290: data relocation to !ENDBR: srso_alias_untrain_ret+0x0
Fixes: 4535e1a417 ("x86/bugs: Fix the SRSO mitigation on Zen3/4")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240405144637.17908-1-bp@kernel.org
We want to fix:
0e11073247 ("x86/retpoline: Do the necessary fixup to the Zen3/4 srso return thunk for !SRSO")
So merge in Linus's latest into x86/urgent to have it available.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull firewire fixes from Takashi Sakamoto:
"The firewire-ohci kernel module has a parameter for verbose kernel
logging. It is well-known that it logs the spurious IRQ for bus-reset
event due to the unmasked register for IRQ event. This update fixes
the issue"
* tag 'firewire-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: ohci: mask bus reset interrupts between ISR and bottom half
In the FireWire OHCI interrupt handler, if a bus reset interrupt has
occurred, mask bus reset interrupts until bus_reset_work has serviced and
cleared the interrupt.
Normally, we always leave bus reset interrupts masked. We infer the bus
reset from the self-ID interrupt that happens shortly thereafter. A
scenario where we unmask bus reset interrupts was introduced in 2008 in
a007bb857e: If
OHCI_PARAM_DEBUG_BUSRESETS (8) is set in the debug parameter bitmask, we
will unmask bus reset interrupts so we can log them.
irq_handler logs the bus reset interrupt. However, we can't clear the bus
reset event flag in irq_handler, because we won't service the event until
later. irq_handler exits with the event flag still set. If the
corresponding interrupt is still unmasked, the first bus reset will
usually freeze the system due to irq_handler being called again each
time it exits. This freeze can be reproduced by loading firewire_ohci
with "modprobe firewire_ohci debug=-1" (to enable all debugging output).
Apparently there are also some cases where bus_reset_work will get called
soon enough to clear the event, and operation will continue normally.
This freeze was first reported a few months after a007bb85 was committed,
but until now it was never fixed. The debug level could safely be set
to -1 through sysfs after the module was loaded, but this would be
ineffectual in logging bus reset interrupts since they were only
unmasked during initialization.
irq_handler will now leave the event flag set but mask bus reset
interrupts, so irq_handler won't be called again and there will be no
freeze. If OHCI_PARAM_DEBUG_BUSRESETS is enabled, bus_reset_work will
unmask the interrupt after servicing the event, so future interrupts
will be caught as desired.
As a side effect to this change, OHCI_PARAM_DEBUG_BUSRESETS can now be
enabled through sysfs in addition to during initial module loading.
However, when enabled through sysfs, logging of bus reset interrupts will
be effective only starting with the second bus reset, after
bus_reset_work has executed.
Signed-off-by: Adam Goldman <adamg@pobox.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Pull spi fixes from Mark Brown:
"A few small driver specific fixes, the most important being the
s3c64xx change which is likely to be hit during normal operation"
* tag 'spi-fix-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: mchp-pci1xxx: Fix a possible null pointer dereference in pci1xxx_spi_probe
spi: spi-fsl-lpspi: remove redundant spi_controller_put call
spi: s3c64xx: Use DMA mode from fifo size
Pull regulator fix from Mark Brown:
"One simple regualtor fix, fixing module autoloading on tps65132"
* tag 'regulator-fix-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: tps65132: Add of_match table
Pull regmap fixes from Mark Brown:
"Richard found a nasty corner case in the maple tree code which he
fixed, and also fixed a compiler warning which was showing up with the
toolchain he uses and helpfully identified a possible incorrect error
code which could have runtime impacts"
* tag 'regmap-fix-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: maple: Fix uninitialized symbol 'ret' warnings
regmap: maple: Fix cache corruption in regcache_maple_drop()
Pull io_uring fixes from Jens Axboe:
- Backport of some fixes that came up during development of the 6.10
io_uring patches. This includes some kbuf cleanups and reference
fixes.
- Disable multishot read if we don't have NOWAIT support on the target
- Fix for a dependency issue with workqueue flushing
* tag 'io_uring-6.9-20240405' of git://git.kernel.dk/linux:
io_uring/kbuf: hold io_buffer_list reference over mmap
io_uring/kbuf: protect io_buffer_list teardown with a reference
io_uring/kbuf: get rid of bl->is_ready
io_uring/kbuf: get rid of lower BGID lists
io_uring: use private workqueue for exit work
io_uring: disable io-wq execution of multishot NOWAIT requests
io_uring/rw: don't allow multishot reads without NOWAIT support
Pull SCSI fixes from James Bottomley:
"The most important is the libsas fix, which is a problem for DMA to a
kmalloc'd structure too small causing cache line interference. The
other fixes (all in drivers) are mostly for allocation length fixes,
error leg unwinding, suspend races and a missing retry"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Fix MCQ mode dev command timeout
scsi: libsas: Align SMP request allocation to ARCH_DMA_MINALIGN
scsi: sd: Unregister device if device_add_disk() failed in sd_probe()
scsi: ufs: core: WLUN suspend dev/link state error recovery
scsi: mylex: Fix sysfs buffer lengths
