Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
Replace system_wq with system_percpu_wq, keeping the same behavior.
The old wq (system_wq) will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251105152023.259813-1-marco.crivellari@suse.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
On X Elite, the DP PHY needs another clock called ref, while all other
platforms do not.
The current X Elite devices supported upstream work fine without this
clock, because the boot firmware leaves this clock enabled. But we should
not rely on that. Also, even though this change breaks the ABI, it is
needed in order to make the driver disables this clock along with the
other ones, for a proper bring-down of the entire PHY.
So in order to handle these clocks on different platforms, make the driver
get all the clocks regardless of how many there are provided.
Cc: stable@vger.kernel.org # v6.10
Fixes: db83c107dc ("phy: qcom: edp: Add v6 specific ops and X1E80100 platform support")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://patch.msgid.link/20251224-phy-qcom-edp-add-missing-refclk-v5-2-3f45d349b5ac@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
On X Elite platform, the eDP PHY uses one more clock called ref.
The current X Elite devices supported upstream work fine without this
clock, because the boot firmware leaves this clock enabled. But we should
not rely on that. Also, even though this change breaks the ABI, it is
needed in order to make the driver disables this clock along with the
other ones, for a proper bring-down of the entire PHY.
So attach the this ref clock to the PHY.
Cc: stable@vger.kernel.org # v6.10
Fixes: 5d56078613 ("dt-bindings: phy: qcom-edp: Add X1E80100 PHY compatibles")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://patch.msgid.link/20251224-phy-qcom-edp-add-missing-refclk-v5-1-3f45d349b5ac@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The SpacemiT K1 SoC includes three USB ports:
- One USB2.0 OTG port
- One USB2.0 host-only port
- One USB3.0 port with an integrated USB2.0 DRD interface
Each of these ports is connected to a USB2.0 PHY responsible for USB2
transmission.
This commit adds support for the SpacemiT K1 USB2.0 PHY, which is
compliant with the USB 2.0 specification and supports both 8-bit 60MHz
and 16-bit 30MHz parallel interfaces.
Signed-off-by: Ze Huang <huang.ze@linux.dev>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Junzhong Pan <panjunzhong@linux.spacemit.com>
Link: https://patch.msgid.link/20251017-k1-usb2phy-v6-2-7cf9ea2477a1@linux.dev
Signed-off-by: Vinod Koul <vkoul@kernel.org>
On Koelsch (R-Car M2-W), during boot and s2ram:
phy phy-e6590100.usb-phy-controller.0: Runtime PM usage count underflow!
While phy_pm_runtime_get{,_sync}() and phy_pm_runtime_put_sync() still
contain pm_runtime_enabled() checks, the same check in
phy_pm_runtime_put() was deemed redundant and removed, causing count
underflows with PHY drivers like drivers/phy/renesas/phy-rcar-gen2.c
that do not use Runtime PM yet,
Fix this by reinstating the check.
Fixes: caad07ae07 ("phy: core: Discard pm_runtime_put() return values")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3ca9f8166d21685bfbf97535da30172f74822130.1767107014.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Starting with Glymur, the PCIe and DP PHYs qserdes register offsets differ
for the same version number. So in order to be able to differentiate
between them, add these ones with DP prefix.
Add the necessary PHY setting tables for enabling the DP path within the
QMP subsystem. Introduced some new callbacks for v8 specific sequences,
such as for clock configurations based on the different link speeds.
Wesley Cheng added some updated settings from the hardware programming
guides on existing PHY tables and clock settings.
Co-developed-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20251209-linux-next-12825-v8-9-42133596bda0@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
For SuperSpeed USB to work properly, there is a set of HW settings that
need to be programmed into the USB blocks within the QMP PHY. Ensure that
these settings follow the latest settings mentioned in the HW programming
guide. The QMP USB PHY on Glymur is a USB43 based PHY that will have some
new ways to define certain registers, such as the replacement of TXA/RXA
and TXB/RXB register sets. This was replaced with the LALB register set.
There are also some PHY init updates to modify the PCS MISC register space.
Without these, the QMP PHY PLL locking fails.
Signed-off-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20251209-linux-next-12825-v8-8-42133596bda0@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
dev_set_drvdata() is called twice, it is sufficient to do it only once.
devm_of_phy_provider_register() can fail, and if it does, the
&priv->cdr_check work item is queued, but not cancelled, and the device
probing failed, so it will trigger use after free. This is a minor risk
though.
Resource initialization should be done a little earlier, in case we need
to dereference dev_get_drvdata() in lynx_28g_pll_read_configuration() or
in lynx_28g_lane_read_configuration().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251125114847.804961-16-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
While adding support for 25GbE, it was noticed that the RCCR0 and TTLCR0
registers have different values for this protocol than the 10GbE and
1GbE modes.
Expand the lynx_28g_proto_conf[] array with the expected values for the
currently supported protocols. These were dumped from a live system, and
are the out-of-reset values. It will ensure that the lane is configured
with these values when transitioning from 25GbE back into one of these
modes.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251125114847.804961-14-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver does not handle well protocol switching to or from USXGMII,
because it conflates it with 10GBase-R.
In the expected USXGMII use case, that isn't a problem, because SerDes
protocol switching performed by the lynx-28g driver is not necessary,
because USXGMII natively supports multiple speeds, as opposed to SFP
modules using 1000Base-X or 10GBase-R which require switching between
the 2.
That being said, let's be explicit, and in case someone requests a
protocol change which involves USXGMII, let's do the right thing.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251125114847.804961-13-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Lynx 28G is a multi-protocol SerDes - it handles serial Ethernet, PCIe,
SATA.
The driver should not use the phylib-specific phy_interface_t as an
internal data representation, but something specific to its internal
capabilities, and only convert to phy_interface_t when PHY_MODE_ETHERNET
is selected and used.
Otherwise it has no way of representing the non-Ethernet lanes (which
was not a short-term goal when the driver was introduced, and is not a
goal per se right now either, but should nonetheless be possible).
Prefer the "enum lynx_lane_mode" name over "lynx_28g_lane_mode", in
preparation of future Lynx 10G SerDes support. This SerDes is part of
the same IP family and has similar capabilities, and will reuse some
code, hence the common data type.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251125114847.804961-12-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The current approach of transitioning from one SerDes protocol to
another in lynx_28g_set_lane_mode() is too poetic.
Because the driver only supports 1GbE and 10GbE, it only modifies those
registers which it knows are different between these two modes. However,
that is hardly extensible for 25GbE, 40GbE, backplane modes, etc.
We need something more systematic to make sure that all lane and
protocol converter registers are written to consistent values, no matter
what was the source lane mode.
For that, we need to introduce tables with register field values, for
each supported lane mode.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251125114847.804961-11-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
