Updates for v6.17
CI:
- uprev mesa and ci-templates
- use shallow clone to speed up build jobs
- remove sdm845/cheza jobs. These runners are no more (RIP
dear chezas)
- fix runner tag for i915 cml runners
- uprev igt to pull in msm test fixes
Core:
- VM_BIND support!
- single source of truth for UBWC configuration. Adds a global soc
driver for UBWC config which is used from display and GPU. (And
later vidc/camera/etc)
- Decouple ties between GPU and KMS, adding a `separate_gpu_kms`
modparam to allow the GPU and KMS to bind to separate DRM devices.
This should better deal with more exotic SoC configurations where
the number of GPUs is different from number of DPUs. The default
behavior is to still come up as a single unified DRM device to
avoid surprising userspace.
DP:
- major rework of the I/O accessors
DPU:
- use version checks instead of feature bits
- SM8750 support
- set min_prefill_lines for SC8180X
DSI:
- SM8750 support
GPU:
- speedbin support for X1-85
- X1-45 support
MDSS:
- SM8750 support
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Robin Clark <robin.clark@oss.qualcomm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACSVV0217R+kpoWQJeuYGHf6q_4aFyEJuKa=dZZKOnLQzFwppg@mail.gmail.com
drm/i915 feature pull #2 for v6.17:
Features and functionality:
- Add drm_panic support for both i915 and xe drivers (Jocelyn Falempe)
- Add initial flip queue implementation, disabled by default, for LNL and PTL
(Ville)
- Add support for Wildcat Lake (WCL) display, version 30.02 (Matt Roper, Matt
Atwood, Dnyaneshwar)
- Extend drm_panel and follower support to DDI eDP (Arun)
Refactoring and cleanups:
- Make all global state objects opaque (Jani)
- Move display works to display specific unordered workqueue (Luca)
- Add and use struct drm_device based pcode interface (Jani, Lucas)
- Use clamp() instead of max()+min() combo (Ankit)
- Simplify wait for power well disable (Jani)
- Various stylistics cleanups and renames (Jani)
Fixes:
- Deal with loss of pipe DMC state (Ville)
- Fix PTL HDCP2 stream status check (Suraj)
- Add workaround for ADL-P DKL PHY DP and HDMI (Nemesa)
- Fix skl_print_wm_changes() stack usage with KMSAN (Arnd Bergmann)
- Fix PCON capability reads on non-branch devices (Chaitanya)
- Fix which platforms have ultra joiner (Ankit)
DRM core changes:
- Add ttm_bo_kmap_try_from_panic() for xe drm_panic support (Jocelyn Falempe)
- Add private pointer to struct drm_scanout buffer for xe/i915 drm_panic support
(Jocelyn Falempe)
Merges:
- Backmerge drm-next for drm_panel and xe changes (Jani)
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6d728bf6ef23681b00dfbc7da9aeae41042dee02@intel.com
The vast majority of drivers that use GEM-SHMEM helpers do not use
an s/g table for imported buffers; specifically all drivers that use
DRM_GEM_SHMEM_DRIVER_OPS. Therefore convert the initializer macro
to DRM_GEM_SHMEM_DRIVER_OPS_NO_MAP_SGT and remove the latter. This
helps to avoid swiotbl errors, such as seen with some Aspeed systems
ast 0000:07:00.0: swiotlb buffer is full (sz: 3145728 bytes), total 32768 (slots), used 0 (slots)
The error is caused by the system's limited DMA capabilities and can
happen with any GEM-SHMEM-based driver. It results in a performance
penalty.
In the case of vgem and vkms, the devices do not support DMA at all,
which can result in failure to map the buffer object into the kernel's
address space. [1][2] Avoiding the s/g table fixes this problem.
The other drivers based on GEM-SHMEM, imagination, lima, panfrost,
panthor, v3d and virtio, use the s/g table of imported buffers. Neither
driver uses the default initializer, so they won't be affected by
this change.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Zenghui Yu <zenghui.yu@linux.dev>
Closes: https://lore.kernel.org/dri-devel/6d22bce3-4533-4cfa-96ba-64352b715741@linux.dev/ # [1]
Reported-by: José Expósito <jose.exposito89@gmail.com>
Closes: https://lore.kernel.org/dri-devel/20250311172054.2903-1-jose.exposito89@gmail.com/ # [2]
Tested-by: Zenghui Yu <zenghui.yu@linux.dev>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://lore.kernel.org/r/20250630143537.309052-1-tzimmermann@suse.de
If the callback is going to have to attempt to grab more locks, it is
useful to have an ww_acquire_ctx to avoid locking order problems.
Why not use the drm_exec helper instead? Mainly because (a) where
ww_acquire_init() is called is awkward, and (b) we don't really
need to retry after backoff, we can just move on to the next object.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661463/
For UNMAP/REMAP steps we could be needing to lock objects that are not
explicitly listed in the VM_BIND ioctl in order to tear-down unmapped
VAs. These helpers handle locking/preparing the needed objects.
Note that these functions do not strictly require the VM changes to be
applied before the next drm_gpuvm_sm_map_lock()/_unmap_lock() call. In
the case that VM changes from an earlier drm_gpuvm_sm_map()/_unmap()
call result in a differing sequence of steps when the VM changes are
actually applied, it will be the same set of GEM objects involved, so
the locking is still correct.
v2: Rename to drm_gpuvm_sm_*_exec_locked() [Danilo]
v3: Expand comments to show expected usage, and explain how the usage
is safe in the case of overlapping driver VM_BIND ops.
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/661458/
add support to add a directory for each client-id
with root at the dri level. Since the clients are
unique and not just related to one single drm device,
so it makes more sense to add all the client based
nodes with root as dri.
Also create a debugfs file which show the process
information for the client and create a symlink back
to the parent drm device from each client.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250704075548.1549849-3-sunil.khatri@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Requirement is to create per client-id based directories to
hold key debugging information and for that access to
root debugfs dentry is need which is not in one place
and that information cannot be stored in drm_device.
Move the debugfs functionality from drm_drv.c and drm_accel.c
to drm_debugfs.c This enables debugfs root node reference
directly drm_debugfs.c and hence enable to create per client-id
directory.
v8: Create drm_accel dentry only if it's config is enabled (Jeff, Hugo)
v8: Merge drm_drv and drm_accel debugfs patches (Koenig, Christian)
v10: Since we moved drm_debugfs_root, hence to handle drm bridge
debugfs add a new function which call drm_bridge_debugfs_params where
drm_debugfs_root is accessible.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Link: https://lore.kernel.org/r/20250704075548.1549849-2-sunil.khatri@amd.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Move big-endian support from drm_fb_xrgb8888_to_rgb565() into the new
helper drm_xrgb8888_to_rgb565be(). The functionality is required for
displays with big-endian byte order. Update all callers.
With the change applied, drm_fb_xrgb8888_to_rgb565() has the same
signature as the other conversion functions, which is required for
further updates to drm_fb_blit(). Also makes the format-conversion
helper available to panic handlers, if necessary.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250625114911.1121301-1-tzimmermann@suse.de
The migration functionality and track-keeping of per-pagemap VRAM
mapped to the CPU mm is not per GPU_vm, but rather per pagemap.
This is also reflected by the functions not needing the drm_gpusvm
structures. So move to drm_pagemap.
With this, drm_gpusvm shouldn't really access the page zone-device-data
since its meaning is internal to drm_pagemap. Currently it's used to
reject mapping ranges backed by multiple drm_pagemap allocations.
For now, make the zone-device-data a void pointer.
Alter the interface of drm_gpusvm_migrate_to_devmem() to ensure we don't
pass a gpusvm pointer.
Rename CONFIG_DRM_XE_DEVMEM_MIRROR to CONFIG_DRM_XE_PAGEMAP.
Matt is listed as author of this commit since he wrote most of the code,
and it makes sense to retain his git authorship.
Thomas mostly moved the code around.
v3:
- Kerneldoc fixes (CI)
- Don't update documentation about how the drm_pagemap
migration should be interpreted until upcoming
patches where the functionality is implemented.
(Matt Brost)
v4:
- More kerneldoc fixes around timeslice_ms
(Himal Ghimiray, Matt Brost)
v6:
- Fix an uninitialized pagemap pointer (CI)
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250619134035.170086-2-thomas.hellstrom@linux.intel.com
To avoid duplicating the tricky bo locking implementation,
Implement ttm_lru_walk_for_evict() using the guarded bo LRU iteration.
To facilitate this, support ticketlocking from the guarded bo LRU
iteration.
v2:
- Clean up some static function interfaces (Christian König)
- Fix Handling -EALREADY from ticketlocking in the loop by
skipping to the next item. (Intel CI)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250623155313.4901-4-thomas.hellstrom@linux.intel.com
drm/i915 feature pull for v6.17:
Features and functionality:
- Add support for DSC fractional link bpp on DP MST (Imre)
- Add support for simultaneous Panel Replay and Adaptive Sync (Jouni)
- Add support for PTL+ double buffered LUT registers (Chaitanya, Ville)
- Add PIPEDMC event handling in preparation for flip queue (Ville)
Refactoring and cleanups:
- Rename lots of DPLL interfaces to unify them (Suraj)
- Allocate struct intel_display dynamically (Jani)
- Abstract VLV IOSF sideband better (Jani)
- Use str_true_false() helper (Yumeng Fang)
- Refactor DSB code in preparation for flip queue (Ville)
- Use drm_modeset_lock_assert_held() instead of open coding (Luca)
- Remove unused arg from skl_scaler_get_filter_select() (Luca)
- Split out a separate display register header (Jani)
- Abstract DRAM detection better (Jani)
- Convert LPT/WPT SBI sideband to struct intel_display (Jani)
Fixes:
- Fix DSI HS command dispatch with forced pipeline flush (Gareth Yu)
- Fix BMG and LNL+ DP adaptive sync SDP programming (Ankit)
- Fix error path for xe display workqueue allocation (Haoxiang Li)
- Disable DP AUX access probe where not required (Imre)
- Fix DKL PHY access if the port is invalid (Luca)
- Fix PSR2_SU_STATUS access on ADL+ (Jouni)
- Add sanity checks for porch and sync on BXT/GLK DSI (Ville)
DRM core changes:
- Change AUX DPCD access probe address (Imre)
- Refactor EDID quirks, amd make them available to drivers (Imre)
- Add quirk for DPCD access probe (Imre)
- Add DPCD definitions for Panel Replay capabilities (Jouni)
Merges:
- Backmerges to sync with v6.15-rcs and v6.16-rc1 (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/fff9f231850ed410bd81b53de43eff0b98240d31@intel.com
drm-misc-next for 6.17:
UAPI Changes:
- Add Task Information for the wedge API
Cross-subsystem Changes:
Core Changes:
- Fix warnings related to export.h
- fbdev: Make CONFIG_FIRMWARE_EDID available on all architectures
- fence: Fix UAF issues
- format-helper: Improve tests
Driver Changes:
- ivpu: Add turbo flag, Add Wildcat Lake Support
- rz-du: Improve MIPI-DSI Support
- vmwgfx: fence improvement
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://lore.kernel.org/r/20250619-perfect-industrious-whippet-8ed3db@houat
UAPI Changes:
- Expose media OA units (Ashutosh)
Merge:
- Restore GuC submit UAF fix around queue destruction
accidentally removed in a drm-xe-fixes merge (Auld)
Core Changes:
- drm/gpusvm: Introduce devmem_only flag for allocation (Himal)
- drm/gpusvm: Add timeslicing support to GPU SVM (Brost)
Driver Changes:
- Make gem shrinker drm managed (Thomas)
- SRIOV VF Post-migration recovery of GGTT nodes and CTB (Tomasz)
- Some W/A additions and updates (Aradhya, Shekhar, Vinay, Daniele)
- Prefetch Support for svm ranges (Himal, Brost)
- Don't allocate managed BO for each policy change (Michal)
- Simplify and fix diff calculation in GuC submit (Lucas)
- Track FAST_REQ GuC H2Gs to report where errors came from (John)
- SRIOV PF: Don't allow LMEM provisioning if LMTT isn't available (Piotr)
- Check if all domains awake for MOCS dump (Tejas)
- Make creation of SLPC debugfs files conditional (Aradhya)
- Default auto_link_downgrade status to false (Aradhya)
- Use xe_mmio_read32() to read mtcfg register (Shuicheng)
- Updates in PCI ID tables (Atwood, Shekhar)
- SRIOV VF: Fail migration recovery if fixups needed but not supported (Tomasz)
- Add missing documentation around freq and RPa (Rodrigo)
- Some other SVM related fixes (Himal, Auld, Brost, Maarten)
- Allow to trigger GT resets using debugfs writes (Michal)
- Optimise CCS case for WB pages (Auld)
- Create LRC BO without VM (Niranjana)
- Initialize MOCS index early (Bala)
- HWMON fixes for BMG (Karthik, Lucas)
- Drop redundant conversion to bool (Raag)
- Rework eviction rejection of bound external bos (Thomas)
- Stop re-submitting signalled jobs (Auld)
- Small fixes and cleanups for PXP (Daniele)
- Convert some print messages to GT-oriented ones (Michal)
- Resend potentially lost GuC H2G MMIO request (Michal)
- Add configfs to load with fewer engines (Lucas)
- Remove unmatched xe_vm_unlock from __xe_exec_queue_init (Maciej)
- SRIOV VF: Small updates around GGTT handling (Michal)
- Make VMA tile_present, tile_invalidated access rules clear (Brost)
- Xe3 Tuning: Disable NULL query for Anyhit Shader (Nitin)
- Fixes for VF GuC version (Daniele)
- Don't store the xe device pointer inside xe_ttm_tt (Dave)
- Small improvements in topology code (Michal)
- Stop relying on GGTT internals (Maarten)
- GSM size should be constant on most platforms (Roper)
- Reorder 'Get pages failed' message (Brost)
- WA BB related fixes and improvements (Lucas, Brost)
- Fix early wedge on GuC load failure (Daniele)
- Add helper function to inject fault into ct_dead_capture (Satyanarayana)
- Determine ATS / PTA programming during early sw init (Roper)
- Consolidate PAT programming logic for pre-Xe2 and post-Xe2 (Roper)
- Fix kconfig prompt (Lucas)
- Convert xe_pci tests to parametrized tests (Michal)
- Do not kill VM in PT code on -ENODATA (Brost)
- Move LRC_ENGINE_ID_PPHWSP_OFFSET outside of parallel offset (Brost)
- Enable media OA (Ashutosh)
- GuC log level tuning (Lucas)
- Add xe_vm_has_valid_gpu_mapping helper (Brost)
- Opportunistically skip TLB invalidaion on unbind (Brost)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/aFMb_NVF_oCW7UVl@intel.com
When a device get wedged, it might be caused by a guilty application.
For userspace, knowing which task was involved can be useful for some
situations, like for implementing a policy, logs or for giving a chance
for the compositor to let the user know what task was involved in the
problem. This is an optional argument, when the task info is not
available, the PID and TASK string won't appear in the event string.
Sometimes just the PID isn't enough giving that the task might be already
dead by the time userspace will try to check what was this PID's name,
so to make the life easier also notify what's the task's name in the user
event.
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250617124949.2151549-4-andrealmeid@igalia.com
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Reading DPCD registers has side-effects and some of these can cause a
problem for instance during link training. Based on this it's better to
avoid the probing quirk done before each DPCD register read, limiting
this to the monitor which requires it. Add an EDID quirk for this. Leave
the quirk enabled by default, allowing it to be disabled after the
monitor is detected.
v2: Fix lockdep wrt. drm_dp_aux::hw_mutex when calling
drm_dp_dpcd_set_probe_quirk() with a dependent lock already held.
v3: Add a helper for determining if DPCD probing is needed. (Jani)
v4:
- s/drm_dp_dpcd_set_probe_quirk/drm_dp_dpcd_set_probe (Jani)
- Fix documentation of drm_dp_dpcd_set_probe().
- Add comment at the end of internal quirk entries.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250609125556.109538-1-imre.deak@intel.com
Add support for EDID based quirks which can be queried outside of the
EDID parser iteself by DRM core and drivers. There are at least two such
quirks applicable to all drivers: the DPCD register access probe quirk
and the 128b/132b DPRX Lane Count Conversion quirk (see 3.5.2.16.3 in
the v2.1a DP Standard). The latter quirk applies to panels with specific
EDID panel names, support for defining a quirk this way will be added as
a follow-up.
v2: Reset global_quirks in drm_reset_display_info().
v3: (Jani)
- Use one list for both the global and internal quirks.
- Drop change for panel name specific quirks.
- Add comment about the way quirks should be queried.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250605082850.65136-4-imre.deak@intel.com
Move the bridge pre_enable call before crtc enable, and the bridge
post_disable call after the crtc disable.
The sequence of enable after this patch will look like:
bridge[n]_pre_enable
...
bridge[1]_pre_enable
crtc_enable
encoder_enable
bridge[1]_enable
...
bridge[n]_enable
And, the disable sequence for the display pipeline will look like:
bridge[n]_disable
...
bridge[1]_disable
encoder_disable
crtc_disable
bridge[1]_post_disable
...
bridge[n]_post_disable
The definition of bridge pre_enable hook says that,
"The display pipe (i.e. clocks and timing signals) feeding this bridge
will not yet be running when this callback is called".
Since CRTC is also a source feeding the bridge, it should not be enabled
before the bridges in the pipeline are pre_enabled. Fix that by
re-ordering the sequence of bridge pre_enable and bridge post_disable.
While at it, update the drm bridge API documentation as well.
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Tested-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250605171524.27222-4-aradhya.bhatia@linux.dev
Signed-off-by: Maxime Ripard <mripard@kernel.org>
[WHY]
1. Drivers using DRM_GEM_SHADOW_PLANE_HELPER_FUNCS and
DRM_GEM_SHMEM_DRIVER_OPS (e.g., udl, ast) do not require
sg_table import.
They only need dma_buf_vmap() to access the shared buffer's
kernel virtual address.
2. On certain Aspeed-based boards, a dma_mask of 0xffff_ffff may
trigger SWIOTLB during dmabuf import. However, IO_TLB_SEGSIZE
restricts the maximum DMA streaming mapping memory, resulting in
errors like:
ast 0000:07:00.0: swiotlb buffer is full (sz: 3145728 bytes), total 32768 (slots), used 0 (slots)
[HOW]
Provide a gem_prime_import implementation without sg_table mapping
to avoid issues (e.g., "swiotlb buffer is full"). Drivers that do not
require sg_table can adopt this.
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250522070714.439824-1-oushixiong1025@163.com
