Pull media updates from Mauro Carvalho Chehab:
- Sensor driver fixes
- remove dead TI wl128x FM radio driver
- Add support for the imx462 sensor at the IMX290 binding
- V4L2 pixel data transmitter and receiver documentation improvements
- Add support for MIPI Discovery and Configuration for C-PHY line
orders
- imx8-isi fixes and improvements
- stm32: dcmipp: add core support for the stm32mp25
- qcom: camss: Add sc7280 support
- Various fixes and enhancements
* tag 'media/v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (152 commits)
media: nuvoton: Fix an error check in npcm_video_ece_init()
media: dvb-usb-v2: af9035: fix ISO C90 compilation error on af9035_i2c_master_xfer
media: platform: rzg2l-cru: rzg2l-video: Fix the comment in rzg2l_cru_start_streaming_vq()
media: fix secfeed undefined when filter alloc fail
media: dt-bindings: trivial white-space and example cleanup
MAINTAINERS: repair file entry in MEDIA DRIVERS FOR STM32 - CSI
media: solo6x10: Use const 'struct bin_attribute' callback
media: saa7164: Remove unused values
staging: media: imx: fix OF node leak in imx_media_add_of_subdevs()
media: platform: exynos4-is: Remove unused __is_get_frame_size
media: vidtv: Fix a null-ptr-deref in vidtv_mux_stop_thread
media: mmp: Bring back registration of the device
media: cec: include linux/debugfs.h and linux/seq_file.h where needed
Revert "media: qcom: camss: Restructure camss_link_entities"
media: venus: Remove unused hfi_core_ping()
media: dt-bindings: qcom-venus: Deprecate video-decoder and video-encoder where applicable
media: venus: Populate video encoder/decoder nodename entries
media: venus: Add support for static video encoder/decoder declarations
media: venus: match instance creation and destruction order
media: venus: destroy hfi session after m2m_ctx release
...
With KASAN enabled, clang fails to optimize the inline version of
vdec_vp9_slice_map_counts_eob_coef() properly, leading to kilobytes
of temporary values spilled to the stack:
drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_vp9_req_lat_if.c:1526:12: error: stack frame size (2160) exceeds limit (2048) in 'vdec_vp9_slice_update_prob' [-Werror,-Wframe-larger-than]
This seems to affect all versions of clang including the latest (clang-20),
but the degree of stack overhead is different per release.
Marking the function as noinline_for_stack is harmless here and avoids
the problem completely.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Just like was done with MM_REG_WRITE, remove the mask from the
MM_REG_POLL macro, leaving MM_REG_POLL_MASK to be used when a mask is
required, and update the call sites accordingly. In this case, all calls
require a mask, so MM_REG_POLL remains unused, but at least this makes
the MM_REG_POLL macros consistent with the MM_REG_WRITE ones.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are two macros to issue a cmdq write: MM_REG_WRITE_MASK and
MM_REG_WRITE, but confusingly, both of them take a mask parameter. The
difference is that MM_REG_WRITE additionally checks whether the mask
passed in contains the register mask, in which case, the 0xffffffff mask
is passed to cmdq_pkt_write_mask(), effectively disregarding the mask
and calling cmdq_pkt_write() as an optimization.
Move that optimization to the MM_REG_WRITE_MASK macro and make
MM_REG_WRITE the variant that doesn't take a mask, directly calling to
cmdq_pkt_write().
Change the call sites to MM_REG_WRITE whenever a mask wasn't necessary
(ie 0xffffffff or a <register>_MASK was passed as mask) and in other
cases to MM_REG_WRITE_MASK.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The platform compatibility checks for MT8183 and
MT8195 in mdp_cmdq_prepare() are redundant as they are
done in __get_config_offset() itself. Furthermore
there are two if-else branch in __get_config_offset()
which have similar conditions and are redundant.
To address this, remove the check in mdp_cmdq_prepare()
and combine the two if-else branch into one in
__get_config_offset().
Signed-off-by: Mohammed Anees <pvmohammedanees2003@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Since commit 88785982a1 ("media: vb2: use lock if wait_prepare/finish
are NULL") it is no longer needed to set the wait_prepare/finish
vb2_ops callbacks as long as the lock field in vb2_queue is set.
Since the vb2_ops_wait_prepare/finish callbacks already rely on that field,
we can safely drop these callbacks.
This simplifies the code and this is a step towards the goal of deleting
these callbacks.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> # for meson-ge2d
Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/media to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
"struct vb2_ops" are not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
18059 3096 16 21171 52b3 drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_stateful.o
After:
=====
text data bss dec hex filename
18171 2968 16 21155 52a3 drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_stateful.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
MT8195 and MT8188 share a similar MDP3 macro-block, with minor
differences - as in, the latter supports a subset of the number
of components supported by the former, but are otherwise handled
in the same way.
Add driver data for MT8188, reusing the already present MT8195
data where possible.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
As talked about in commit 14d3ae2efe ("ARM: 8507/1: dma-mapping: Use
DMA_ATTR_ALLOC_SINGLE_PAGES hint to optimize alloc"), it doesn't
really make sense to try to allocate contiguous chunks of memory for
video encoding/decoding. Let's switch the Mediatek vcodec driver to
pass DMA_ATTR_ALLOC_SINGLE_PAGES and take some of the stress off the
memory subsystem.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Both 'bs_dma' and 'dma_addr' are integers. No need to convert the
type from dma_addr_t to uint64_t again.
Fixes: d353c3c34a ("media: mediatek: vcodec: support 36 bits physical address")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The supported decoder commands are different for stateless and
stateful architectures. Add stateless decoder commands to fix
the v4l2-compliance test error below.
Codec ioctls:
VIDIOC_ENCODER_CMD returned -1 (Inappropriate ioctl for device)
VIDIOC_TRY_ENCODER_CMD returned -1 (Inappropriate ioctl for device)
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
VIDIOC_G_ENC_INDEX returned -1 (Inappropriate ioctl for device)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
VIDIOC_DECODER_CMD returned -1 (Invalid argument)
VIDIOC_TRY_DECODER_CMD returned -1 (Invalid argument)
VIDIOC_TRY_DECODER_CMD returned -1 (Invalid argument)
fail: v4l2-test-codecs.cpp(126): ret
test VIDIOC_(TRY_)DECODER_CMD: FAIL
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Pull media updates from Mauro Carvalho Chehab:
- New V4L2 ioctl VIDIOC_REMOVE_BUFS
- experimental support for using generic metaformats on V4L2 core
- New drivers: Intel IPU6 controller driver, Broadcom BCM283x/BCM271x
- More cleanups at atomisp driver
- Usual bunch of driver cleanups, improvements and fixes
* tag 'media/v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (328 commits)
media: bcm2835-unicam: Depend on COMMON_CLK
Revert "media: v4l2-ctrls: show all owned controls in log_status"
media: ov2740: Ensure proper reset sequence on probe()
media: intel/ipu6: Don't print user-triggerable errors to kernel log
media: bcm2835-unicam: Fix driver path in MAINTAINERS
media: bcm2835-unicam: Fix a NULL vs IS_ERR() check
media: bcm2835-unicam: Do not print error when irq not found
media: bcm2835-unicam: Do not replace IRQ retcode during probe
media: bcm2835-unicam: Convert to platform remove callback returning void
media: media: intel/ipu6: Fix spelling mistake "remappinp" -> "remapping"
media: intel/ipu6: explicitly include vmalloc.h
media: cec.h: Fix kerneldoc
media: uvcvideo: Refactor iterators
media: v4l: async: refactor v4l2_async_create_ancillary_links
media: intel/ipu6: Don't re-allocate memory for firmware
media: dvb-frontends: tda10048: Fix integer overflow
media: tc358746: Use the correct div_ function
media: i2c: st-mipid02: Use the correct div function
media: tegra-vde: Refactor timeout handling
media: stk1160: Use min macro
...
Use an API that resembles more the actual use of job_count.
Found by cocci:
drivers/media/platform/mediatek/mdp3/mtk-mdp3-cmdq.c:527:5-24: WARNING: atomic_dec_and_test variation before object free at line 541.
drivers/media/platform/mediatek/mdp3/mtk-mdp3-cmdq.c:578:6-25: WARNING: atomic_dec_and_test variation before object free at line 581.
Link: https://lore.kernel.org/linux-media/20240429-fix-cocci-v3-12-3c4865f5a4b0@chromium.org
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
It is possible that mtk_vcodec_enc_pw_on fails, and in that scenario
the PM counter is not incremented, and subsequent call to
mtk_vcodec_enc_pw_off decrements the counter, leading to a PM imbalance.
Fix by bailing out of venc_if_encode in the case when mtk_vcodec_enc_pw_on
fails.
Fixes: 4e855a6efa ("[media] vcodec: mediatek: Add Mediatek V4L2 Video Encoder Driver")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In the MediaTek vcodec driver, while mtk_vcodec_mem_free() is mostly
called only when the buffer to free exists, there are some instances
that didn't do the check and triggered warnings in practice.
We believe those checks were forgotten unintentionally. Add the checks
back to fix the warnings.
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In mtk_vcodec_mem_free(), there are two cases where a NULL VA is passed:
- mem->size == 0: we are called to free no memory. This may happen when
we call mtk_vcodec_mem_free() twice or the memory has never been
allocated.
- mem->size > 0: we are called to free memory but without VA. This means
that we failed to free the memory for real.
Both cases are not expected to happen, and we want to have clearer error
messages to describe which one we just encountered.
Update the error messages to include more information for that purpose.
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In mtk_vcodec_mem_alloc() and mtk_vcodec_mem_free(), the value of
mem->size is not expected to change before and when using the DMA APIs
and debug print, so there's no point in keeping local copies of it.
Drop the local variable "size" in the mentioned functions, and update
printk format identifiers accordingly.
This makes the code slightly more visually consistent, and retrieve a
small amount of memory that is used for no real purpose.
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The VP9 bitstream uses superframes, which each contain 8 sub-frames,
enable accessing the last superframe by increasing the range of the index
vaidation as the maximum number of superframes is 8 and not 7, so that the
last sub-frame can be decoded normally with the stateful VP9 decoder.
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The ipi handler here tries hard to maintain const-ness of its argument,
but by doing that causes a warning about function type casts:
drivers/media/platform/mediatek/vcodec/common/mtk_vcodec_fw_vpu.c:38:32: error: cast from 'mtk_vcodec_ipi_handler' (aka 'void (*)(void *, unsigned int, void *)') to 'ipi_handler_t' (aka 'void (*)(const void *, unsigned int, void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
38 | ipi_handler_t handler_const = (ipi_handler_t)handler;
| ^~~~~~~~~~~~~~~~~~~~~~
Remove the hack and just use a non-const argument.
Fixes: bf1d556ad4 ("media: mtk-vcodec: abstract firmware interface")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In some chips, MDP3 has the ability to utilize two pipelines to
parallelly process a single frame.
To enable this feature, multiple CMDQ clients and packets need to
be configured at the same time.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Extend the component settings used in MT8195 MDP3.
Additionally, it is crucial to read all component settings in
a specific manner to ensure that shared memory data structure lengths
are aligned across different platforms.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The amount of MDP3 driver probes is determined by the registered
clocks of MMSYS.
Since MT8195 MDP3 utilizes VPPSYS0 and VPPSYS1, it's necessary to
prevent multiple driver registrations.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
