mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2026-08-31 16:30:02 -04:00
33192a26cddea7a7e4ca66e5c3eebd36fa8be2bb
1463848 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Lorenzo Stoakes (ARM)
|
33192a26cd |
mm/huge_memory: fix huge_zero_pfn race
Patch series "mm/huge_memory: fix huge_zero_pfn race", v2.
There is a subtle race in the reference-counted huge_zero_folio
implementation.
The fast path atomic logic fails to account for the fact that the shrinker
(which drops the final huge_zero_refcount pin) can overwrite huge_zero_pfn
with the ~0UL sentinel value in shrink_huge_zero_folio_scan() after a
racing get_huge_zero_folio() installed a valid value there.
This results in huge_zero_folio being correctly set but huge_zero_pfn
being set incorrectly and thus is_huge_zero_pfn() and consequently
is_huge_zero_pmd() will misidentify the huge zero folio as being an
ordinary THP folio.
This can result in the huge zero folio being split and otherwise treated
incorrectly.
The solution to this is very subtle as there is an atomic fast path, and
thus ordering in weakly ordered architectures has to be treated very
carefully.
The first commit fixes the issue by introducing a spinlock around
huge_zero_[pfn, folio, refcount] write, with careful consideration paid to
load/store ordering in the fast path. It is placed first and kept as
small as possible so that it can be backported on its own.
The second commit is a pure cleanup which reworks the
CONFIG_PERSISTENT_HUGE_ZERO_FOLIO logic to better separate the persistent
logic from the dynamically allocated one.
This patch (of 2):
If !CONFIG_PERSISTENT_HUGE_ZERO_FOLIO, the huge_zero_folio is refcounted
by huge_zero_refcount and returned by mm_get_huge_zero_folio().
When the caller is done with the huge zero page, its reference count is
decremented. Only a shrinker can set the reference count to zero.
A race can unfortunately occur between a shrinker decrementing the
reference count to zero and a concurrent page fault.
This is because shrink_huge_zero_folio_scan() might, if very unlucky, be
preempted between setting huge_zero_refcount to zero and writing an
invalid value.
During this time get_huge_zero_folio() could write to huge_zero_pfn before
shrink_huge_zero_folio_scan() resumes.
In this event the huge zero folio will be persistently misidentified
causing the THP code path to be entered inappropriately for the huge zero
folio:
CPU 0 CPU 1
=======================================|=================================
shrink_huge_zero_folio_scan() |
atomic_cmpxchg() sets refcount to 0 |
xchg() sets huge_zero_folio to NULL | get_huge_zero_folio()
| | atomic_inc_not_zero() -> zero
preempted for a long time | Allocate new huge zero folio
| | Write valid huge_zero_folio
v | Write valid huge_zero_pfn
Overwrite huge_zero_pfn with ~0UL <--- Invalid overwrite!
This results in is_huge_zero_pfn() and is_huge_zero_pmd() incorrectly
returning false for a huge zero page which could result in issues like the
huge zero folio being incorrectly split.
Note that the issue is with huge_zero_pfn not huge_zero_folio, as
get_huge_zero_folio() uses cmpxchg() gated on huge_zero_folio being NULL
with a retry loop and shrink_huge_zero_folio_scan() uses xchg() to set
huge_zero_folio.
Fix the issue by introducing a spinlock, huge_zero_lock, to prevent
concurrent write of huge_zero_folio, huge_zero_pfn and huge_zero_refcount.
There needs to be significant care taken here to ensure correctness:
The fast path in get_huge_zero_folio() uses atomic_inc_not_zero(), which
is outside of the critical section, and means huge zero allocation is
gated on zero huge_zero_refcount.
The fast path doesn't use huge_zero_lock, so the critical section is
irrelevant to it.
So invariants are required - huge_zero_refcount MUST:
* Only be set in the huge_zero_lock critical section to ensure
serialisation of huge_zero_pfn, huge_zero_folio and huge_zero_refcount
writes.
* Be set non-zero only AFTER huge_zero_[pfn, folio] are set to valid values
so installation of the huge zero folio on read page fault ensures
concurrent is_huge_zero_*() calls correctly identify the huge zero folio.
* Be set zero only BEFORE huge_zero_[pfn, folio] are set to NULL and ~0UL
respectively, and atomically.
Establish these by:
* Only setting huge_zero_refcount to zero or an absolute value in the
huge_zero_lock critical section in get_huge_zero_folio() and
shrink_huge_zero_folio_scan(), and always updating atomically there
and elsewhere.
* Using atomic_set_release(&huge_zero_refcount) in get_huge_zero_folio()
after huge_zero_[pfn, folio] are set. This is paired with
atomic_inc_not_zero() to ensure atomic_inc_not_zero() only observes a
non-zero value if huge_zero_[pfn, folio] are set.
* Using atomic_cmpxchg() in shrink_huge_zero_folio_scan() (as before) to
ensure that it is set zero only when equal to 1 and set atomically.
* atomic_cmpxchg() being fully ordered ensures this is done prior to
huge_zero_[folio, pfn] being set to NULL and ~0UL respectively.
Eliminate the retry loop in get_huge_zero_folio() as the atomic_cmpxchg()
in shrink_huge_zero_folio_scan() is now performed under the lock, and
replace with an equally locked atomic_inc() to set the reference count
should the caller be raced on huge zero folio installation.
folio_put() naturally implies a full memory barrier so its ordering is
maintained correctly.
The huge zero folio also cannot be released except when the shrinker does
so as it is non-LRU and non-rmappable.
Note that only the huge zero shrinker (via shrink_huge_zero_folio_scan())
can actually set huge_zero_refcount to zero, which is the count of mm's
which have at least one huge zero folio installed plus one shrinker pin.
Additionally convert a BUG_ON() to a VM_WARN_ON_ONCE().
Link: https://lore.kernel.org/20260730-fix-refcounted-huge-zero-v2-0-c5d8a41b317f@kernel.org
Link: https://lore.kernel.org/20260730-fix-refcounted-huge-zero-v2-1-c5d8a41b317f@kernel.org
Fixes:
|
||
|
Brendan Jackman
|
50124648db |
MAINTAINERS: update address for Brendan Jackman
Switch my entry in MAINTAINERS and .mailmap to my @linux.dev email address Link: https://lore.kernel.org/20260729-email-change-v1-1-666ae7c2b7fc@google.com Signed-off-by: Brendan Jackman <jackmanb@google.com> Signed-off-by: Brendan Jackman <brendan.jackman@linux.dev> Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Acked-by: Lorenzo Stoakes (ARM) <ljs@kernel.org> Acked-by: Zi Yan <ziy@nvidia.com> Cc: David Hildenbrand <david@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Liam R. Howlett <liam@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Hugh Dickins
|
86da3f7e1e |
mm/filemap: __filemap_add_folio() restore index before retrying
In __filemap_add_folio()'s split-a-conflict loop, xas_set_order() is
applied repeatedly: each application modifies xas.xa_index, rounding it
down according to the split_order attempted at that stage: and if all goes
as intended, it eventually (or immediately) converges on an
xas_try_split() to the required folio_order, with xas.xa_index now the
same as index: then xas_store() puts the new folio into the xarray there.
But if a new node was needed, and GFP_NOWAIT allocation did not get one,
the lock is dropped, xas_nomem() used to allocate, and sequence retried.
If (that part of) the xarray is unchanged when the lock is reacquired, no
problem. But what if the conflict was meanwhile resolved by another
thread (perhaps even doing the same thing, inserting a folio at that same
index)? Isn't there a danger of now putting our folio into the xarray at
an intermediate rounded-down index? With !folio_contains() bug to follow,
when CONFIG_DEBUG_VM=y is checking for that.
Fix this with an xas_set_order() to restore the original xas.xa_index at
the bottom of the loop, so the retry does a full re-evaluation after
reacquiring the lock, and cannot reach xas_store() with the wrong index.
Production was suffering from rare SIGILLs and SIGSEGVs, executable text
found a page away from where it belonged, !folio_contains() bug hit when
debug enabled: symptoms not seen since this patch went in.
Link: https://lore.kernel.org/562fbfa6-dd6d-0b6a-2461-ed2ff1173bc8@google.com
Fixes:
|
||
|
Ramin Moussavi
|
c2689266e5 |
microblaze: restore the page alignment of swapper_pg_dir
microblaze handles TLB misses in software, and the handler builds the address of the L1 entry by ORing the index into the page directory base instead of adding it (hw_exception_handler.S): bsrli r5, r3, PGDIR_SHIFT - 2 andi r5, r5, PAGE_SIZE - 4 /* Assume pgdir aligned on 4K boundary, no need for "andi r4,r4,0xfffff003" */ or r4, r4, r5 lwi r4, r4, 0 /* Get L1 entry */ The index is masked to the low 12 bits, so the OR only works if those bits of the base are zero -- which is exactly the assumption the comment states and the reason the masking of the base can be skipped. swapper_pg_dir had no alignment directive of its own. It was aligned because it followed empty_zero_page in head.S, and that one carried the .align 12: .section .data .global empty_zero_page .align 12 empty_zero_page: .space PAGE_SIZE .global swapper_pg_dir swapper_pg_dir: .space PAGE_SIZE Commit |
||
|
Lorenzo Stoakes (ARM)
|
9d3277b2c0 |
arm64: remove redundant concurrent ptdump UAF mitigation
This partially reverts commit |
||
|
Lorenzo Stoakes (ARM)
|
27c32e5538 |
mm/ptdump: always stabilise against page table freeing using init_mm
Previous commits have established the invariant that kernel page table freeing is performed while an mmap read lock on init_mm is held, which fixes races between ptdump and kernel page table freeing over init_mm. However, x86 and arm64 can perform a ptdump over an mm other than init_mm via ptdump_walk_pgd() and since kernel memory ranges are shared across non-kernel mm's, this means that the race still exists for these cases. Fix this by acquiring a nested mmap write lock for init_mm in ptdump_walk_pgd(). This is safe as we take this after mmap write locking the mm, and nothing acquires the init_mm lock first before locking an arbitrary mm, so no deadlock is possible. Also update walk_page_range_debug() to assert that init_mm is write locked, add a comment explaining why and remove some redundant code, and eliminate the unnecessary and confusing invocation of walk_kernel_page_table_range(). We can safely remove the non-NULL check for walk.mm, as the mmap lock asserts would NULL pointer deref if it was (and of course no callers do this). The first point at which ptdump can race kernel page table freeing is commit |
||
|
Lorenzo Stoakes (ARM)
|
26444eb714 |
mm/vmalloc: acquire init_mm lock on huge vmap to avoid ptdump UAF
Patch series "mm: fix UAF caused by race between ptdump and vmap pgtable freeing", v6. Kernel page table walkers fall into two broad categories - those ranges where no exclusion is required via walk_kernel_page_table_range_lockless() and those where exclusion is required via walk_kernel_page_table_range() or walk_page_range_debug(). The former category is used only by arm64 arch code operating on ranges it both wholly owns and does not concurrently write. The latter category consists of kernel page table walkers operating on ranges that are wholly owned (but which need exclusion against concurrent writers). The lock used for exclusion is the mmap lock, and for kernel ranges this is the mmap lock on init_mm. ptdump is a special case being both the only user of walk_page_range_debug(), and the only case in which it walks ranges it does not own. This presents a problem, as page tables may be freed under ptdump. And indeed there is a use-after-free bug in the kernel as a result, which this series addresses. vmap promotes page tables to huge leaf entries where possible, freeing the lower page table when it does. It does this with no meaningful locks held against concurrent ptdump walks. As a result, use-after-free can currently occur. This series addresses the issue by having the vmap huge promotion logic acquire the mmap read lock while both setting the huge page table entry and freeing the prior leaf page table. The ptdump code already acquires the mmap write lock, so by doing so we ensure that the ptdump walker only ever observes either the huge page table entry or the existing page table entry, and nothing is freed underneath it. A mitigation for this issue was already applied for arm64 in commit |
||
|
Chris Gellermann
|
9f1d75a4ce |
selftests/mm: fix potential wild pointer access of getline due to missing init
This is another occurrence of using getline where the code assumes that
getline allocates memory to store the line, but the pointer passed to it
is uninitialized and potentially a non-null pointer. This violates the
Open Group Spec[1] and caused a segfault in a similar situation in
selftest/clone3/clone3_set_tid. Fix it by initializing the line pointer
to NULL.
The issue has been found by simply grepping through the selftest code
after running into the issue in clone3_set_tid. Whether it segfaults in
its current state is unknown to me. But it's good to be addressed due to
defensive reasons.
Link: https://lore.kernel.org/20260722130246.2135563-3-christian.gellermann@codasip.com
Link: https://pubs.opengroup.org/onlinepubs/9799919799/functions/getline.html [1]
Fixes:
|
||
|
Chris Gellermann
|
8f6f9fd93c |
selftests/clone3: fix wild pointer access of getline due to missing init
Patch series "selftests: Add missing initalization of pointer passed to
getline", v2.
This patch (of 2):
Clone3_set_tid uses getline(&line, ...) in a loop to read the child's
process status. The code expects that getline allocates the buffer for
the line on the first loop iteration. According to the Open Group
Spec[1], char *line has to be null pointer for this:
> ssize_t getline(char **restrict lineptr, ...);
> If *lineptr is a null pointer or if the object pointed to by *lineptr
> is of insufficient size, an object shall be allocated as if by
malloc()
> or the object shall be reallocated as if by realloc()[...].
However, char *line is only declared, leading to an undefined value that
is potentially non-null. In an example run with Musl v1.2.6, the realloc
call[2] of getdelim, which implements getline, triggers a segfault:
./run_kselftest.sh --test clone3:clone3_set_tid
[ 1366.165898] kselftest: Running tests in clone3
...
[ 1367.799244] clone3_set_tid[811]: unhandled signal 11 code 0x1 at
0x0000000000000000 in libc.so[68184,3fbf69f000+4c000]
[ 1367.802808] CPU: 0 UID: 0 PID: 811 Comm: clone3_set_tid Not tainted
..
[ 1367.804188] epc: 0x0000003fbf6b0184
[ 1367.804188] ra : 0x0000003fbf6d4664
[ 1367.804188] sp : 0x0000003fce5f2e40
[ 1367.805314] gp : 0x0000002aaab0dfb8
[ 1367.805314] tp : 0x0000003fbf6f14a8
[ 1367.805314] t0 : 0x0000003fbf63d000
...
Looking at the realloc implementation, Musl mallocs for a null pointer
memory. But for a non-null pointer, it assumes it's passed a valid
pointer to the heap and tries to access its meta-data. This leads to the
segfault we see:
void *realloc(void *p, size_t n)
{
if (!p) return malloc(n);
if (size_overflows(n)) return 0;
struct meta *g = get_meta(p);
...
}
Fix this by properly initializing the line pointer to NULL.
Link: https://lore.kernel.org/20260722130246.2135563-1-christian.gellermann@codasip.com
Link: https://lore.kernel.org/20260722130246.2135563-2-christian.gellermann@codasip.com
Link: https://pubs.opengroup.org/onlinepubs/9799919799/functions/getline.html [1]
Link: https://git.musl-libc.org/cgit/musl/tree/src/stdio/getdelim.c#n38 [2]
Fixes:
|
||
|
Link Lin
|
0b45f6927a |
mm/page_reporting: use system_freezable_wq to fix UAF during suspend
During PM freeze (e.g. S3 suspend or S4 hibernation), device drivers like
virtio_balloon reset their underlying virtio devices and delete their
virtqueues via vdev->config->del_vqs().
However, page reporting work (page_reporting_process) was scheduled on the
global system_wq. Because system_wq lacks the WQ_FREEZABLE flag, the PM
freezer skips it, leaving page_reporting_process active during suspend.
If pages are freed into the buddy allocator while suspending (for example,
when core MM invokes the balloon shrinker during S4 hibernation image
saving), page reporting triggers virtballoon_free_page_report() on deleted
virtqueues, resulting in a Use-After-Free / General Protection Fault:
[ 196.795226] general protection fault, probably for non-canonical address 0xaa1436fe70dae6df: 0000 [#1] SMP NOPTI
[ 196.825967] Workqueue: events page_reporting_process
[ 196.831038] RIP: 0010:virtqueue_add_split+0x233/0x4c0 [virtio_ring]
[ 196.927073] virtballoon_free_page_report+0x3a/0xe0 [virtio_balloon]
[ 196.946943] page_reporting_process+0x370/0x4f0
Fix this by switching page reporting work to system_freezable_wq. This
ensures that the PM freezer pauses page_reporting_process before device
drivers destroy their reporting virtqueues. Because the reporting worker
is frozen, memory reclamation/freeing (e.g. via shrinker execution) can
safely return pages to MM during freeze without triggering unfrozen
reporting work on deleted virtqueues.
This aligns with the driver's existing design. The comment in
virtballoon_freeze() states:
/*
* The workqueue is already frozen by the PM core before this
* function is called.
*/
Testing:
I have verified these fixes using Google’s virtualization infrastructure
by running continuous suspend/resume iterations (40+ cycles) while
churning memory using stress-ng (`stress-ng --vm 4 --vm-bytes 60%
--timeout 1`) to constantly create free pages for the buddy allocator. We
also set the `page_reporting_order` parameter to 0 to make the page
reporting worker highly sensitive, forcing it to pick up any 4K free
pages. This confirmed that the UAF crashes are no longer reproducible.
Link: https://lore.kernel.org/20260721005603.1710551-1-linkl@google.com
Fixes:
|
||
|
Richard Chang
|
dc37771a43 |
mm: vmscan: abort proactive reclaim early when freezing for suspend
Proactive reclaim (triggered via memory.reclaim or node sysfs) checks for pending signals in its outer loop in user_proactive_reclaim(). However, the inner reclaim loops—specifically scanning cgroups in shrink_many() and evicting/aging folios in try_to_shrink_lruvec()—can run for a long time before returning to the outer loop, especially on systems with many cgroups or large memory sizes. During system suspend, the PM freezer attempts to freeze all tasks by sending fake signals (setting TIF_SIGPENDING). Because the inner loops do not check for pending signals, the proactive reclaim task can remain stuck in kernel space for seconds, failing to enter the refrigerator in a timely manner. This leads to suspend failures due to freeze timeouts, a behavior observed on Android devices. This latency issue is specific to proactive reclaim because of its large, user-defined reclaim targets (could be gigabytes). Since commit |
||
|
Nico Pache (Red Hat)
|
8c7372c5b1 |
MAINTAINERS: update Nico Pache's email address
Switch my entry in MAINTAINERS and .mailmap to my @linux.dev email address Link: https://lore.kernel.org/20260721101811.115954-1-nico.pache@linux.dev Signed-off-by: Nico Pache <npache@redhat.com> Signed-off-by: Nico Pache (Red Hat) <nico.pache@linux.dev> Acked-by: David Hildenbrand (Arm) <david@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Peter Collingbourne
|
1fcac73551 |
arm64, mailmap: update email address for Peter Collingbourne
I am no longer at Google. Link: https://lore.kernel.org/20260718172923.8297-1-peter@pcc.me.uk Signed-off-by: Peter Collingbourne <peter@pcc.me.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jakub Kacinski <kuba@kernel.org> Cc: Martin Kepplinger <martink@posteo.de> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Burak Emir
|
598356522b |
MAINTAINERS: update address for Burak Emir
Update MAINTAINERS and .mailmap to point to my gmail.com address: burak.emir@gmail.com. Link: https://lore.kernel.org/20260718151303.2649-1-burak.emir@gmail.com Signed-off-by: Burak Emir <burak.emir@gmail.com> Cc: Alice Ryhl <aliceryhl@google.com> Cc: Jakub Kacinski <kuba@kernel.org> Cc: Martin Kepplinger <martink@posteo.de> Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Kiryl Shutsemau (Meta)
|
e923bd2105 |
mm/huge_memory: unlock i_mmap_rwsem before releasing after-split folios
__folio_split() keeps dereferencing the mapping after the split:
shmem_uncharge(mapping->host) and remap_page() while the folios are still
frozen/locked, and i_mmap_unlock_read(mapping) at the very end, after the
after-split folios have been unlocked and freed.
Nothing holds an inode reference across that. The split relies on @folio
-- which the beyond-EOF drop loop never removes, as it starts at
folio_next(folio) -- staying locked and in the page cache to hold off
eviction. But the unlock loop unlocks @folio before i_mmap_unlock_read()
runs. If the caller's @lock_at is a tail beyond EOF, as memory_failure()
passes when splitting a poisoned tail of a shmem THP that reaches past
i_size during truncation, it too is gone from the page cache; so once
@folio is unlocked no locked, in-cache folio pins the inode, and a
concurrent final iput() can evict and RCU-free it before
i_mmap_unlock_read() touches i_mmap_rwsem:
BUG: KASAN: slab-use-after-free in __up_read+0x634/0x790
i_mmap_unlock_read include/linux/fs.h:537 [inline]
__folio_split+0x732/0x1640 mm/huge_memory.c:4100
try_to_split_thp_page+0xab/0x390 mm/memory-failure.c:1675
memory_failure+0x1394/0x26e0 mm/memory-failure.c:2470
Freed by task 4601:
shmem_free_in_core_inode+0x54/0xb0 mm/shmem.c:5177
evict+0x57f/0xac0 fs/inode.c:870
Do every mapping dereference while @folio still pins the inode: drop
i_mmap_rwsem right after remap_page(), before the loop that unlocks and
frees the after-split folios, and clear @mapping so the exit path does not
unlock it again. shmem_uncharge() and remap_page() already run before
that point, so after this nothing past the unlock loop touches the inode
or the mapping.
This is now a rule the split depends on, alongside keeping @folio frozen
until the page cache is updated: no inode or mapping dereference once the
after-split folios start being unlocked.
Link: https://lore.kernel.org/20260716095424.471052-1-kirill@shutemov.name
Fixes:
|
||
|
Jiakai Xu
|
45ebe45408 |
riscv/mm: use physical alignment for vmemmap_start_pfn
RISC-V computes vmemmap_start_pfn by rounding phys_ram_base down to VMEMMAP_ADDR_ALIGN. That alignment must therefore be expressed in the physical-address domain. Commit |
||
|
Nico Pache
|
d09a8fd521 |
mm/migrate: exclude hugetlb folios from MTHP_STAT_NR_ANON accounting
__folio_migrate_mapping() increments MTHP_STAT_NR_ANON for the destination
folio when `folio_test_anon(folio) && folio_test_large(folio)` is true.
However, hugetlb folios satisfy both conditions despite having a
completely separate accounting system — they use hugetlb_add_anon_rmap()
which does not touch mTHP stats, and their free path also bypasses the
mTHP decrement in __free_pages_prepare().
This causes MTHP_STAT_NR_ANON to be incremented on each hugetlb migration
without a corresponding decrement, permanently inflating the nr_anon
counter.
Add a !folio_test_hugetlb() check to __folio_migrate_mapping() so that
only actual mTHP folios are counted.
Link: https://lore.kernel.org/20260717064502.1980173-3-npache@redhat.com
Fixes:
|
||
|
Nico Pache
|
4bd0c3515a |
mm: decrement MTHP_STAT_NR_ANON in free_zone_device_folio()
Patch series "mm: fix PMD level mTHP accounting bugs", v2.
While running selftests I noticed the PMD level per-mTHP stats (nr_anon)
remained elevated after each run. After further investigation I noticed
this accounting error occurs for both the migration.private_anon_htlb_test
and the HMM tests.
In the HMM case this is due to folio_add_new_anon_rmap() incrementing the
mTHP stats, but never containing a corresponding decrement in
free_zone_device_folio(). We solve this by making sure to decrement the
counter when freeing device memory.
In the migration case, we are incrementing this counter without first
checking whether this folio is a hugetlb folio, which relies on a separate
accounting system. We solve this by adding the proper hugetlb check
before incrementing this counter.
With these changes in place, the two tests no longer cause elevated PMD
level accounting issues.
This patch (of 2):
When a zone device folio is mapped as anonymous, folio_add_new_anon_rmap()
increments MTHP_STAT_NR_ANON. The corresponding decrement lives in
__free_pages_prepare() in page_alloc.c, but zone device folios are freed
via free_zone_device_folio() which never calls __free_pages_prepare().
This causes nr_anon to remain permanently elevated after zone device
folios are freed.
Add the missing mod_mthp_stat() decrement to free_zone_device_folio() so
that the counter is properly balanced.
Link: https://lore.kernel.org/20260717064502.1980173-1-npache@redhat.com
Link: https://lore.kernel.org/20260717064502.1980173-2-npache@redhat.com
Fixes:
|
||
|
Breno Leitao
|
1833ce36b3 |
mm: memcg: initialize *locked in memcg1_oom_prepare() stub
mem_cgroup_oom() passes an uninitialized "locked" to memcg1_oom_prepare()
and reads it back in memcg1_oom_finish():
bool locked, ret;
...
if (!memcg1_oom_prepare(memcg, &locked))
return false;
ret = mem_cgroup_out_of_memory(memcg, mask, order);
memcg1_oom_finish(memcg, locked);
This relies on memcg1_oom_prepare() setting *locked whenever it returns
true. The CONFIG_MEMCG_V1=y version does, but the stub used when
CONFIG_MEMCG_V1=n returns true without touching *locked, so
memcg1_oom_finish() consumes an uninitialized value. On a memcg OOM this
is reported by UBSAN:
UBSAN: invalid-load in mm/memcontrol.c:1932:27
load of value 0 is not a valid value for type 'bool' (aka '_Bool')
Initialize *locked to false in the stub; with cgroup v1 compiled out there
is no OOM lock to take.
Link: https://lore.kernel.org/20260716-memcg-oom-uninit-locked-v2-1-63631d878eb4@debian.org
Fixes:
|
||
|
Linus Torvalds
|
62cc902415 |
Merge tag 'mm-hotfixes-stable-2026-07-27-14-18' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton: "13 hotfixes. All are cc:stable. 11 are for MM. All are singletons - please see the changelogs for details" * tag 'mm-hotfixes-stable-2026-07-27-14-18' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: fs/proc/task_mmu: fix PAGEMAP_SCAN written state for PMD holes mm/hugetlb: fix list corruption in allocate_file_region_entries() mm: mglru: fix stale batch updates after memcg reparenting selftest: fix headers in fclog.c ocfs2: fix boundary check in ocfs2_check_dir_entry() to use buffer offset mm/percpu-km: fix bitmap overflow and accounting in pcpu_create_chunk() mm/util: don't read __page_2 for order-1 folios in snapshot_page() mm/hugetlb: fix swap entry corruption when clearing uffd-wp at fork() mm: migrate_device: fix pte_pfn/pte_dirty called on non-present PTE fs/proc/task_mmu: fix PAGEMAP_SCAN written state for unpopulated ptes userfaultfd: wait on source PMD during UFFDIO_MOVE lib: test_hmm: use device devt for coherent device range selection mm/vmstat: fold stranded per-cpu node stats when a node comes online |
||
|
Linus Torvalds
|
aa6fc3defb |
Merge tag 'for-next-keys-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull keys fixes from Jarkko Sakkinen: - An unprivileged keyring whose keys collide through the description-chunk path can drive assoc_array node splitting into an out-of-bounds slot write. Fix it. - Fix the DCP trusted keys backend * tag 'for-next-keys-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: assoc_array: trim the final shortcut word using the current chunk end keys: make keyring key-chunk byte order agree with keyring_diff_objects() keys: fix out-of-bounds read in keyring_get_key_chunk() KEYS: trusted: dcp: fix key_len validation and calc_blob_len() return type |
||
|
Linus Torvalds
|
e895a6fc20 |
Merge tag 'erofs-for-7.2-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"Fix a regression in page cache sharing which can cause a NULL pointer
dereference, and limit LZMA stream memory usage on systems with many
CPUs.
- Keep a valid f_path for page cache sharing to fix a recent
mincore() NULL pointer dereference
- Limit LZMA stream pool size when too many processors are available
- Sync up with Hongbo Li's latest email address"
* tag 'erofs-for-7.2-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: cap LZMA stream pool size
erofs: ensure valid f_path for page cache sharing
MAINTAINERS: update Hongbo Li's email address
|
||
|
Linus Torvalds
|
e63c75f72f |
Merge tag 'pinctrl-v7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"The most interesting commit is the S4 fix for AMD, which probably is
helpful to a whole bunch of important machines.
- Wakeup nits on the Qualcomm SC8280XP
- Double-free issues on the device tree parsing error path
- Fixup of the S4 sleep state handling on AMD pin control
- Missing Kconfig select REGMAP_MMIO for the Microchip driver leading
to compile stalls
- Missing Kconfig select GENERIC_PINCONF for the Bitmain BM1880
leading to compile stalls"
* tag 'pinctrl-v7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: bm1880: add missing select GENERIC_PINCONF
pinctrl-amd: Don't clear S4 wake bits at probe
pinctrl: microchip-sgpio: add missing select REGMAP_MMIO
pinctrl: devicetree: don't free uninitialized dev_name on error path
pinctrl: qcom: sc8280xp: Add missing wakeup entries for GPIO143/151
pinctrl: qcom: Unconditionally mark gpio as wakeup enable
|
||
|
Michael Bommarito
|
c9b47e6b23 |
erofs: cap LZMA stream pool size
fs/erofs/decompressor_lzma.c sizes the module-global MicroLZMA stream
pool from num_possible_cpus() when the lzma_streams module parameter is
unset, then z_erofs_load_lzma_config() preallocates one image-supplied
dictionary per stream, accepting dictionaries up to 8 MiB. On high-CPU
systems, a small EROFS image can pin hundreds of MiB of vmalloc-backed
decoder state until the erofs module is unloaded.
Impact: An EROFS image mounted by the system can pin up to 8 MiB of
vmalloc memory per LZMA stream, either as intended or unexpectedly.
Bound the default stream count by a new
CONFIG_EROFS_FS_ZIP_LZMA_DEFAULT_MAX_STREAMS option, default 16, so the
worst-case default preallocation is 128 MiB if the number of CPUs is no
less than 16 while preserving the existing per-image dictionary limit.
An explicit lzma_streams module parameter is still honoured as-is, so
administrators who deliberately size the pool are not affected.
Fixes:
|
||
|
Gao Xiang
|
96b2dbbe58 |
erofs: ensure valid f_path for page cache sharing
Previously, backing files for page cache sharing were set up with
f_path left as NULL (only f_inode was valid). It worked, but a recent
mincore fix relies on f_path.mnt and crashes (found by "erofs/028" on
7.2-rc4):
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP PTI
CPU: 3 UID: 0 PID: 675528 Comm: fincore Not tainted 7.2.0-rc4-00002-g[]-dirty #1 PREEMPT(lazy)
Hardware name: Red Hat KVM, BIOS 1.16.0-4.al8 04/01/2014
RIP: 0010:__do_sys_mincore+0xc0/0x2c0
...
Specify valid paths using valid disconnected dentries together with
erofs_ishare_mnt instead of leaving f_path empty, so they are more
like real backing files in a pseudo filesystem and standard
backing_file_open() can be used directly.
Fixes:
|
||
|
Linus Torvalds
|
f5098b6bae | Linux 7.2-rc5 v7.2-rc5 | ||
|
Linus Torvalds
|
4235cb24ec |
Merge tag 'vfs-7.2-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- vfs: Preserve the ACL_DONT_CACHE state in forget_cached_acl().
ACL_DONT_CACHE is meant to be a permanent opt-out from ACL caching
which FUSE relies on for servers that don't negotiate FUSE_POSIX_ACL.
The helper replaced it with ACL_NOT_CACHED, silently re-enabling the
cache, and as fuse doesn't invalidate the cache for such servers a
properly timed get_acl() returned stale ACLs. Comes with a fuse
selftest reproducing this.
- pidfs:
- Preserve PIDFD_THREAD when a thread pidfd is reopened via
open_by_handle_at(). PIDFD_THREAD shares the O_EXCL bit which
do_dentry_open() strips after the flags have been validated, so
the reopened pidfd silently became a process pidfd. Comes with a
selftest.
- Add a pidfs_dentry_open() helper so the regular pidfd allocation
path and the file handle path share the code that forces O_RDWR
and reapplies the pidfd flags that do_dentry_open() strips.
- Handle FS_IOC32_GETVERSION in the compat ioctl path.
- Make pidfs_ino_lock static.
- iomap:
- Fix the block range calculation in ifs_clear_range_dirty() so a
partial clear doesn't drop the dirty state of blocks the range
only partially covers.
- Support invalidating partial folios so a partial truncate or hole
punch with blocksize < foliosize doesn't leave stale dirty bits
behind.
- Only set did_zero when iomap_zero_iter() actually zeroed
something.
- Guard ifs_set_range_dirty() and ifs_set_range_uptodate() against
zero-length ranges where the unsigned last-block calculation
underflows and bitmap_set() writes far beyond the ifs->state
allocation.
- Don't merge ioends with different io_private values as the merge
could leak or corrupt the private data of the individual ioends.
- exec:
- Raise bprm->have_execfd only once the binfmt_misc interpreter has
actually been opened. The flag was set as soon as a matching 'O'
or 'C' entry was found. If the interpreter open failed with
ENOEXEC the exec fell through to the next binary format with
have_execfd raised but no executable staged and begin_new_exec()
NULL derefed past the point of no return.
- Fix an unsigned loop counter wrap in transfer_args_to_stack() on
nommu. An overlong argument or environment string pushes bprm->p
below PAGE_SIZE, the stop index becomes zero, and the loop never
terminates, wrapping its counter and copying garbage from in
front of the page array into the new process stack.
- Make binfmt_elf_fdpic only honour the first PT_INTERP like
binfmt_elf does. Each additional PT_INTERP overwrote the previous
interpreter, leaking the name allocation and the interpreter file
reference together with the write denial open_exec() took,
leaving the file unwritable for as long as the system runs.
- overlayfs:
- Compare the full escaped xattr prefix including the trailing dot.
An xattr like "trusted.overlay.overlayfoo" was misclassified as
an escaped overlay xattr.
- Check read access to the copy_file_range() source with the
source's mounter credentials.
- super: Thawing a filesystem whose block device was frozen with
bdev_freeze() deadlocked. Dropping the last block layer freeze
reference from under s_umount ends up in fs_bdev_thaw() which
reacquires s_umount on the same task. Pin the superblock with an
active reference instead and call bdev_thaw() without holding
s_umount.
- procfs: Return EACCES instead of success when the ptrace access check
for namespace links fails.
- afs: Use afs_dir_get_block() rather than afs_dir_find_block() for
block 0 in afs_edit_dir_remove(), matching afs_edit_dir_add().
- Push the memcg gating of ->nr_cached_objects() down into the btrfs
and shmem callbacks instead of skipping every callback during
non-root memcg reclaim. The blanket check short-circuited XFS whose
inode reclaim hook is intentionally driven from per-memcg contexts to
free memcg-charged slab.
- eventpoll: Pin files while checking reverse paths.
Since struct file became SLAB_TYPESAFE_BY_RCU a concurrent close
could free and recycle the file under the check which then took and
dropped the f_lock of whatever live file now occupies that slot.
* tag 'vfs-7.2-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (24 commits)
super: fix emergency thaw deadlock on frozen block devices
pidfs: make pidfs_ino_lock static
eventpoll: pin files while checking reverse paths
fs: push nr_cached_objects memcg gating into individual filesystems
afs: Fix afs_edit_dir_remove() to get, not find, block 0
iomap: prevent ioend merge when io_private differs
iomap: add comments for ifs_clear/set_range_dirty()
iomap: fix out-of-bounds bitmap_set() with zero-length range
iomap: fix incorrect did_zero setting in iomap_zero_iter()
iomap: support invalidating partial folios
iomap: correct the range of a partial dirty clear
fs/super: fix emergency thaw double-unlock of s_umount
pidfs: handle FS_IOC32_GETVERSION in compat ioctl
ovl: check access to copy_file_range source with src mounter creds
proc: Fix broken error paths for namespace links
pidfs: add pidfs_dentry_open() helper
selftests/pidfd: check PIDFD_THREAD survives open_by_handle_at()
pidfs: preserve thread pidfds reopened by file handle
ovl: fix trusted xattr escape prefix matching
selftests/fuse: add ACL_DONT_CACHE regression test
...
|
||
|
Linus Torvalds
|
72841e8e83 |
Merge tag 'spi-fix-v7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown: "Just a couple of small bits for the SpacemiT driver - one small fix, and a new compatible in the DT binding" * tag 'spi-fix-v7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: dt-bindings: spacemit: add K3 SPI compatible spi: spacemit: Correct TX FIFO slot calculation |
||
|
Linus Torvalds
|
e6bfeebfe1 |
Merge tag 'regulator-fix-v7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown: "One driver specific fix where one of the MediaTek drivers duplicated some core code buggily, and a core fix for an ordering issue on startup where we could end up configuring a voltage outside of constraints due to the order in which we applied constraints" * tag 'regulator-fix-v7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: core: clamp voltage constraints before applying apply_uV regulator: mt6358: use regmap helper to read fixed LDO calibration |
||
|
Linus Torvalds
|
09b2124a47 |
Merge tag 'char-misc-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH: "Here are a number of small char/misc/etc driver fixes for 7.2-rc5 that resolve a bunch of different reported issues. Included in here are: - rust_binder error message reporting fix - stratix10-svc firmware driver fixes - mei driver fix - intel_th hardware tracing driver fix - comedi driver fix - uio_hv_generic driver fix - ntsync selftest fix - nsm misc driver fix - some MAINTAINER file updates All of these have been in linux-next for over a week with no reported issues" * tag 'char-misc-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: MAINTAINERS: Update wine-devel list address rust_binder: only print failure if error has source intel_th: fix MSC output device reference leak misc: nsm: pin the module while the device is open mei: bus: access mei_device under device_lock on cleanup misc: nsm: only unlock nsm_dev on post-lock error paths selftests: ntsync: correct CONFIG_NTSYNC name comedi: comedi_parport: deal with premature interrupt uio_hv_generic: Bind to FCopy device by default MAINTAINERS: Add Greg Kroah-Hartman to GPIB firmware: stratix10-svc: fix teardown order in remove to prevent race firmware: stratix10-svc: handle NO_RESPONSE in async poll firmware: stratix10-svc: fix FCS SMC call kernel-doc firmware: stratix10-svc: fix memory leaks and list corruption bugs |
||
|
Linus Torvalds
|
516e2cb010 |
Merge tag 'staging-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH: "Here are two small staging driver fixes for 7.2-rc5. They both resolve some reported bugs in the rtl8723bs staging driver and have been in linux-next for over a week with no reported issues" * tag 'staging-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: rtl8723bs: fix OOB reads in rtw_get_wps_ie() staging: rtl8723bs: fix inverted HT40 secondary channel offset |
||
|
Linus Torvalds
|
3d0a01cad2 |
Merge tag 'tty-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are two small serial driver fixes for 7.2-rc5. They are:
- sc16is7xx get_direction() callback fix, which resolves a
user-triggerable warning in the driver
- NULL pointer dereference on some platforms using the 8250_mid
serial driver
Both have been in linux-next for over a week with no reported issues"
* tag 'tty-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: sc16is7xx: implement gpio get_direction() callback
serial: 8250_mid: Fix NULL function pointer dereference on DNV/ICX-D/SNR platforms
|
||
|
Linus Torvalds
|
79ba9db003 |
Merge tag 'usb-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH: "Here are some small USB fixes and new device quirks and ids: - usb storage quirk added - new usb serial device ids added - usb-serial device name leak and other bug fixes - small xhci driver fixes - normal batch of typec driver fixes for reported issues - usb-atm much-reported-by-syzbot fix for firmware download races - sysfs BOS device removal race fix - lots of usb gadget driver fixes for reported issues - other small USB driver fixes for other reported problems All of these have been in linux-next this past week, many of them much longer" * tag 'usb-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (30 commits) usb: typec: ucsi: Correct teardown ordering in ucsi_init() error path USB: serial: io_edgeport: cap received transmit credits USB: serial: option: add TDTECH MT5710-CN USB: serial: io_ti: reject oversized boot-mode firmware USB: serial: mxuport: validate firmware header size usb: atm: ueagle-atm: reject descriptors that confuse probe and disconnect usb: typec: ucsi: yoga_c630: Remove redundant duplicate altmode handling usb: typec: ucsi: Add duplicate detection to nvidia registration path usb: typec: ucsi: Detect and skip duplicate altmodes from buggy firmware usb: gadget: dummy_hcd: prevent fifo_req reuse during giveback usb: chipidea: fix usage_count leak when autosuspend_delay is negative usb: core: sysfs: add lock to bos_descriptors_read() usb: musb: omap2430: Do not put borrowed of_node in probe usb: core: port: Deattach Type-C connector on component unbind USB: storage: add NO_ATA_1X quirk for Longmai USB Key USB: serial: ftdi_sio: add support for E+H FXA291 USB: serial: keyspan_pda: fix data loss on receive throttling usb: gadget: printer: fix infinite loop in printer_read() usb: gadget: f_midi: cancel pending IN work before freeing the midi object usb: gadget: udc: bdc: free IRQ and drain func_wake_notify before teardown ... |
||
|
Linus Torvalds
|
864be1277d |
Merge tag 'trace-v7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt: - Move rb_desc->nr_page_va before updating dynamic array The rb_descr->page_va is a dynamic array counted by nr_page_va. But the updating of the page_va[] is done before the nr_page_va is incremented causing a build with CONFIG_UBSAN_BOUNDS to flag it as an overflow. Move the increment of the counted by value before the array element is updated. - Propagate errors from remote event bulk updates The return value of trace_remote_enable_event() was not being checked by remote_events_dir_enable_write() where it would silently fail. Have it check the return value and propagate that back up to user space. - Fix resource leak on mmiotrace trace_pipe close The mmiotrace tracer was created in 2008 before the trace_pipe had a close callback to allow tracers to do clean up from trace_pipe open. The trace_pipe close cleanup callback was added in 2009 but the mmiotrace tracer was not updated. It had a hack to do the cleanup in the read call, where it may leak if user space did not read the entire buffer. Add a callback to mmiotrace trace_pipe close do to the cleanup properly. - Fix a possible NULL pointer dereference in the mmiotrace tracer If the mmio_pipe_open() fails to find a PCI device, it will set the hiter->dev pointer to NULL. The read function will blindly dereference that pointer. Fix the read call to check to see if that pointer is populated before dereferencing it. - Fix union collision of module and refcnt for dynamic events In 'struct trace_event_call', the 'module' pointer and the 'refcnt' atomic variable share the same memory space in a union. The filter on module logic only checked if the 'module' was set to determine if the event belonged to the module. As dynamic events are always builtin, it doesn't need the 'module' field of the structure and used a refcount. But the module filtering logic would then mistaken these dynamic events as a module and call module_name(event->module) on it. Add a check to see if the event is a dynamic event and if so, do not check it for being part of the given module. - Reset the top level buffer in selftests before running instances The ftracetest selftest initializes each instance before executing the tests. But it does not reset the top level buffer. Dynamic events are only added and removed by the top level so any left over dynamic events will not be removed by the reset in the instances. Left over dynamic events can cause the tests to incorrectly fail. Reset the top level buffer before running the instances. - Make the context_switch counter 64 bit The code to read user space for a system call trace event or for a trace_marker will disable migration, enable preemption, read user space into a per CPU buffer, disable preemption and enable migration again. It checks if the per CPU context switch counter to see if it changed, and if it did not, it would know that the per CPU buffer was not touched by another task. But the save counter was 32 bit and it would compare it to the 64 bit context_switch variable. A long running system could have the context_switch variable greater that 1<<32 in which case the compare will always fail. The compare will promote the 32 bit int saved value to 64 bit and compare it to the full 64 bit counter. Since the top 32 bits of the saved value was zero, it would never match. - Fix a use-after-free of the event_enable trigger The event_enable trigger allows for enabling one event when another event is triggered. When the trigger is removed, it must go through a synchronization phase to make sure it is not triggered again. The trigger itself is delayed by the "bulk delay" logic that was recently added. But the code that frees the event_enable data used to rely on the trigger code to do the synchronization. Now that the code uses the call RCU functions (and a workqueue), that delay no longer is there. Add a callback private_data_free() function that allows triggers to clean up data after the synchronization phase has completed. - Move the module_ref counter into the delay callback Since an event of the event_enable trigger can enable an event for a module, it ups the module ref count for that event's module. This prevents the event from trying to enable an event that no longer exists and cause a use-after-free bug. The ref counter was set back down when the trigger was removed but not after thy synchronization phase. This could lead to the module data being accessed after module was unloaded. Move the module ref decrement into the private_data_free() callback of the event_enable trigger. - Add mutex to protect parser in ftrace filtering The set_ftrace_filter file uses a parsing descriptor that is allocated at open and modified by writes. If multiple threads were to write to the descriptor at the same time, it can corrupt the parser. Add a mutex around the modifications of the parser descriptor. - Fix possible corruption in perf syscall tracing The perf system call trace events can now read user space. To do so, the reads of user space enable preemption and disables it again. During this time that preemption is enabled, the task can migrate. The perf event list head is assigned via a per CPU pointer. It is done before the user space part is called. If the user space reading migrates the task to another CPU, then the head pointer is no longer valid. Re-assign the head pointer after the reading of user space to keep it using the correct data. * tag 'trace-v7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: perf: Fix stale head for perf syscall tracing ftrace: Add global mutex to serialize trace_parser access tracing: Delay module ref count for "enable_event" trigger tracing: Fix use-after-free freeing trigger private data tracing: Fix context switch counter truncation selftests/ftrace: Reset triggers at top level before instance loop tracing: Fix union collision of module and refcnt for dynamic events tracing: Fix mmiotrace possible NULL dereferencing of hiter->dev tracing: Fix resource leak on mmiotrace trace_pipe close tracing: Propagate errors from remote event bulk updates tracing/remotes: Fix page_va[] access before counter update in trace_remote_alloc_buffer() |
||
|
Linus Torvalds
|
86d1022b2c |
Merge tag 'm68knommu-fixes-on-top-off-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu fix from Greg Ungerer: - fix broken local SoC IO accesses for ColdFire * tag 'm68knommu-fixes-on-top-off-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: coldfire: fix breakage of missed IO access update |
||
|
Linus Torvalds
|
3f97818796 |
Merge tag 'x86-urgent-2026-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar: - Disable jump/lookup tables in the x86 boot decompressor code a bit more widely, because newer versions of LLVM started optimizing it a bit better and introduced run-time relocations in PIE code (Nathan Chancellor) * tag 'x86-urgent-2026-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot/compressed: Disable jump tables |
||
|
Linus Torvalds
|
a6671109d6 |
Merge tag 'smp-urgent-2026-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP debug fixes from Ingo Molnar: - SMP-call fixes when CSD lock debugging is enabled (Chuyi Zhou) * tag 'smp-urgent-2026-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: smp: Make CSD lock acquisition atomic for debug mode smp: Avoid invalid per-CPU CSD lookup with CSD lock debug |
||
|
Christian Brauner
|
749d7aa037 |
super: fix emergency thaw deadlock on frozen block devices
do_thaw_all_callback() calls bdev_thaw() while holding sb->s_umount
exclusively. If the block device was frozen via bdev_freeze() dropping
the last block layer freeze reference calls fs_bdev_thaw() which
reacquires s_umount:
do_thaw_all_callback(sb)
super_lock_excl(sb) # holds sb->s_umount
bdev_thaw(sb->s_bdev)
mutex_lock(&bdev->bd_fsfreeze_mutex)
# bd_fsfreeze_count drops 1 -> 0
bd_holder_ops->thaw == fs_bdev_thaw
get_bdev_super(bdev)
bdev_super_lock(bdev, true)
super_lock(sb, true)
down_write(&sb->s_umount) # same task: deadlock
The emergency thaw worker deadlocks against itself holding both
s_umount and bd_fsfreeze_mutex. That fscks any subsequent unmount,
freeze, or thaw of that filesystem and block device.
[ 81.878470] sysrq: Show Blocked State
[ 81.880140] task:kworker/0:1 state:D stack:0 pid:11 tgid:11 ppid:2 task_flags:0x4208060 flags:0x00080000
[ 81.884876] Workqueue: events do_thaw_all
[ 81.886656] Call Trace:
[ 81.887759] <TASK>
[ 81.888763] __schedule+0x579/0x1420
[ 81.890372] schedule+0x3a/0x100
[ 81.891794] schedule_preempt_disabled+0x15/0x30
[ 81.893848] rwsem_down_write_slowpath+0x1ea/0x900
[ 81.895191] ? __pfx_do_thaw_all_callback+0x10/0x10
[ 81.896528] down_write+0xbd/0xc0
[ 81.897505] super_lock+0x91/0x180
[ 81.898457] ? __mutex_lock+0xa99/0x1140
[ 81.900748] ? __mutex_unlock_slowpath+0x1f/0x400
[ 81.902069] bdev_super_lock+0x5b/0x150
[ 81.903132] get_bdev_super+0x10/0x60
[ 81.904042] fs_bdev_thaw+0x23/0xf0
[ 81.904755] bdev_thaw+0x82/0x100
[ 81.905484] do_thaw_all_callback+0x2c/0x50
[ 81.906298] __iterate_supers+0x5d/0x130
[ 81.907067] do_thaw_all+0x20/0x40
[ 81.907739] process_one_work+0x206/0x5e0
[ 81.908545] worker_thread+0x1e2/0x3c0
[ 81.909339] ? __pfx_worker_thread+0x10/0x10
[ 81.910171] kthread+0xf4/0x130
[ 81.910799] ? __pfx_kthread+0x10/0x10
[ 81.911528] ret_from_fork+0x2e2/0x3b0
[ 81.912259] ? __pfx_kthread+0x10/0x10
[ 81.913010] ret_from_fork_asm+0x1a/0x30
[ 81.913806] </TASK>
bdev_super_lock() even documents the violated requirement with
lockdep_assert_not_held(&sb->s_umount).
Acquiring bd_fsfreeze_mutex under s_umount also inverts the
bd_fsfreeze_mutex vs. s_umount ordering established by
bdev_{freeze,thaw}() and can thus ABBA against a concurrent block-layer
freeze even when the recursive path isn't hit.
Fix this by not holding s_umount around the bdev_thaw() loop at all. Pin
the superblock with an active reference instead as
filesystems_freeze_callback() does. The active reference keeps the
superblock from being shut down and so ->s_bdev stays valid without
holding s_umount. The block-layer-held freeze is dropped by
fs_bdev_thaw() with FREEZE_MAY_NEST | FREEZE_HOLDER_USERSPACE exactly as
a regular unfreeze would and thaw_super_locked() handles
filesystem-level freezes as before.
The emergency thaw path has deadlocked like this in one form or
another for a long long time but the current exclusively-held
shape dates back to commit [1] where thaw_bdev() already ended in
thaw_super() with s_umount held by do_thaw_all_callback().
Fixes:
|
||
|
Linus Torvalds
|
3dab139d47 |
Merge tag 'rust-fixes-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- 'zerocopy' crates: update to v0.8.54 to fix a modpost error under
'CONFIG_CC_OPTIMIZE_FOR_SIZE=y'.
There are actually two updates in the PR: the one to v0.8.52 is
fairly large and was originally not intended for a fixes PR, but the
actual fix landed in the v0.8.54 one. Thus I included both here.
The v0.8.52 update includes two things upstream added for us:
'--cfg no_fp_fmt_parse' to avoid a local workaround, and the new
'most_traits' feature.
The good news is that, after these updates, the delta with upstream
is now trivial: only an identifier prefix change and the SPDX
parentheses.
- Fix an objtool warning by adding one more 'noreturn' function for
Rust 1.99.0 (expected 2026-10-01).
- Clean up new 'semicolon_in_expressions_from_macros' lint errors for
Rust 1.99.0 (expected 2026-10-01). The lint can be allowed, but it
will be a hard error at some point in the future anyway, so clean it
up now.
- Locally allow new 'suspicious_runtime_symbol_definitions' lint for
Rust 1.98.0 (expected 2026-08-20).
- Globally allow 'clippy::unwrap_or_default' lint since it relies on
optimizations -- under 'CONFIG_CC_OPTIMIZE_FOR_SIZE=y' it does not
work well.
'kernel' crate:
- 'time' module: fix 'Delta::as_micros_ceil()' to round negative values
correctly"
* tag 'rust-fixes-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: time: fix as_micros_ceil() to round correctly for negative Delta
rust: device: avoid trailing ; in printing macros
objtool/rust: add one more `noreturn` Rust function for Rust 1.99.0
rust: zerocopy: update to v0.8.54
rust: zerocopy: update to v0.8.52
rust: allow `clippy::unwrap_or_default` globally
rust: allow `suspicious_runtime_symbol_definitions` lint for Rust >= 1.98
|
||
|
Linus Torvalds
|
ef9ce800df |
Merge tag 'perf-tools-fixes-for-v7.2-1-2026-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo: - Update header copies of kernel headers, including const.h, fs.h, perf_event.h, gfp_types.h, kvm.h, cpufeatures.h, rtnetlink.hp, msr-index.h, drm.h and socket.h - Add some build files related to BPF skels to .gitignore * tag 'perf-tools-fixes-for-v7.2-1-2026-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: tools headers: Sync KVM headers with the kernel sources tools headers: Sync UAPI linux/fs.h with the kernel sources perf beauty: Update copy of linux/socket.h with the kernel sources tools headers: Sync UAPI drm/drm.h with kernel sources tools arch x86: Sync the msr-index.h copy with the kernel sources tools headers x86 cpufeatures: Sync with the kernel sources tools headers: Sync linux/gfp_types.h with the kernel sources tools headers UAPI: Sync linux/rtnetlink.h with the kernel sources tools headers UAPI: Sync linux/const.h with the kernel sources perf bench bpf: Add missing .gitignore file |
||
|
Linus Torvalds
|
d99d2a953a |
Merge tag 'firewire-fixes-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto: "Fix a bug in unit driver for RFC 2734 IPv4 over IEEE 1394. The driver failed to reassemble a complete datagram when it was stored across multiple buffer ranges in the list. Ruoyu Wang reported and fixed it" * tag 'firewire-fixes-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: net: Fix fragmented datagram reassembly |
||
|
Linus Torvalds
|
3fb11702e4 |
Merge tag 'loongarch-fixes-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen: - fix build warnings and errors - move jump_label_init() before parse_early_param() - retrieve CPU package ID from PPTT when available - fix some bugs kgdb, BPF JIT and laptop platform driver bugs * tag 'loongarch-fixes-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: platform/loongarch: laptop: Explicitly reset bl_powered state when suspend platform/loongarch: laptop: Stop setting acpi_device_class() LoongArch: BPF: Fix memory leak in bpf_jit_free() LoongArch: BPF: Zero-extend signed ALU32 div/mod results LoongArch: Fix oops during single-step debugging LoongArch: Fix address space mismatch in kexec command line lookup LoongArch: Retrieve CPU package ID from PPTT when available LoongArch: Move jump_label_init() before parse_early_param() LoongArch: Fix build errors due to wrong instructions for 32BIT LoongArch: Increase TASK_STRUCT_OFFSET up to 2040 for 32BIT |
||
|
Benjamin Boortz
|
dad6e107b3 |
pinctrl: bm1880: add missing select GENERIC_PINCONF
drivers/pinctrl/pinctrl-bm1880.c initialises its pinconf_ops with
.is_generic = true, but that field is only present when
CONFIG_GENERIC_PINCONF is enabled (guarded by #ifdef in pinconf.h).
The Kconfig entry for PINCTRL_BM1880 never selects GENERIC_PINCONF,
so any config that enables CONFIG_PINCTRL_BM1880=y without
CONFIG_GENERIC_PINCONF=y fails to compile:
drivers/pinctrl/pinctrl-bm1880.c:1288:10: error: 'const struct pinconf_ops' has no member named 'is_generic'
Found by randconfig testing on arm64; tinyconfig reproducer below.
Add the missing select to fix the build.
Fixes:
|
||
|
Mario Limonciello
|
ffe8a0c6b5 |
pinctrl-amd: Don't clear S4 wake bits at probe
commit |
||
|
Benjamin Boortz
|
25cb6e9a13 |
pinctrl: microchip-sgpio: add missing select REGMAP_MMIO
The driver calls ocelot_regmap_from_resource() via <linux/mfd/ocelot.h>,
which internally uses devm_regmap_init_mmio() and requires REGMAP_MMIO.
The Kconfig entry does not select REGMAP_MMIO, causing a build failure
when no other driver in the config happens to pull in REGMAP_MMIO:
include/linux/mfd/ocelot.h:34:24: error: implicit declaration of function 'devm_regmap_init_mmio'
Found by randconfig testing on arm64; tinyconfig reproducer below.
Fixes:
|
||
|
Karl Mehltretter
|
015b5bcbcb |
pinctrl: devicetree: don't free uninitialized dev_name on error path
dt_remember_or_free_map() duplicates dev_name for each map entry. If
kstrdup_const() fails, dt_free_map() frees dev_name in all num_maps
entries, including entries that have not been initialized.
Some pinctrl drivers, including pinctrl-imx, allocate the map with
kmalloc() and leave dev_name for the core to initialize. The untouched
entries therefore contain uninitialized data which is passed to
kfree_const().
Reproduced on qemu's mcimx6ul-evk (pinctrl-imx) with failslab injection
while binding the pinctrl-consuming device, under KASAN:
BUG: KASAN: double-free in dt_free_map+0x34/0xa4
Free of addr c425a900 by task init/1
kfree from dt_free_map+0x34/0xa4
dt_free_map from dt_remember_or_free_map+0x184/0x198
dt_remember_or_free_map from pinctrl_dt_to_map+0x33c/0x4c8
pinctrl_dt_to_map from create_pinctrl+0x9c/0x5c0
Initialize all dev_name fields to NULL before duplicating the device
name, making the full-map cleanup safe after a partial failure.
Fixes:
|
||
|
Linus Torvalds
|
0ce37745d4 |
Merge tag 'block-7.2-20260724' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe: - Fix a ublk recovery hang, where END_USER_RECOVERY without a successful START_USER_RECOVERY could be satisfied by a stale completion latch - Fix a stack out-of-bounds read in the CDROMVOLCTRL ioctl - MAINTAINERS email address update for Roger Pau Monne * tag 'block-7.2-20260724' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: MAINTAINERS: update my email address cdrom: fix stack out-of-bounds read in CDROMVOLCTRL ublk: wait on ublk_dev_ready() instead of ub->completion |
||
|
Linus Torvalds
|
73387b89d9 |
Merge tag 'io_uring-7.2-20260724' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe: - Fix a missing ERESTARTSYS conversion in the read paths, which got messed up back when some code consolidation was done for read multishot support - zcrx UAPI rename, dropping the abbreviated "notif" naming in favor of "event" for consistency and to be less ambiguous for users. This was added for 7.2, so let's rename it while we still can. No functional or code changes, just a strict rename * tag 'io_uring-7.2-20260724' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: io_uring/zcrx: rename notif to event io_uring/zcrx: rename ZCRX_NOTIF_NO_BUFFERS io_uring/zcrx: drop "notif" from stats struct names io_uring/rw: fix missing ERESTARTSYS conversion in read paths |
||
|
Steven Rostedt
|
2c2b322acd |
tracing: perf: Fix stale head for perf syscall tracing
The code that can read the user space parameters of a system call may
enable preemption and migrate. The head of the per CPU perf events list
may be pointing to the wrong CPU event if the code migrates the task.
Reassign the head pointer if the system call event called the code that
may have caused a migration.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260724193210.03fae1d6@gandalf.local.home
Reported-by: Sashiko <>
Link: https://sashiko.dev/#/patchset/20260717173252.3431565-1-usama.arif%40linux.dev
Fixes:
|
||
|
Tengda Wu
|
7720b63bce |
ftrace: Add global mutex to serialize trace_parser access
In ftrace, the trace_parser structure is allocated and initialized when a trace file is opened, and is subsequently used across write and release handlers to parse user input. The affected handler paths and their specific functions are: - Open paths: ftrace_regex_open(), ftrace_graph_open() - Write paths: ftrace_regex_write(), ftrace_graph_write() - Release paths: ftrace_regex_release(), ftrace_graph_release() If userspace opens a trace file descriptor and shares it across multiple threads, concurrent write calls will race on the parser's internal state, specifically the 'idx', 'cont', and 'buffer' fields, leading to corrupted input or undefined behavior. Fix this by adding a global mutex, parser_lock, to serialize all access to trace_parser across write and release paths, preventing concurrent corruption of parser state. Fixes: |