Fix Smatch-detected issue:
drivers/char/tpm/tpm-buf.c:208 tpm_buf_read_u8() error:
uninitialized symbol 'value'.
drivers/char/tpm/tpm-buf.c:225 tpm_buf_read_u16() error:
uninitialized symbol 'value'.
drivers/char/tpm/tpm-buf.c:242 tpm_buf_read_u32() error:
uninitialized symbol 'value'.
Zero-initialize the return values in tpm_buf_read_u8(), tpm_buf_read_u16(),
and tpm_buf_read_u32() to guard against uninitialized data in case of a
boundary overflow.
Add defensive initialization ensures the return values are always defined,
preventing undefined behavior if the unexpected happens.
Signed-off-by: Purva Yeshi <purvayeshi550@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Pull btrfs fixes from David Sterba:
- fix potential endless loop when discarding a block group when
disabling discard
- reinstate message when setting a large value of mount option 'commit'
- fix a folio leak when async extent submission fails
* tag 'for-6.15-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: add back warning for mount option commit values exceeding 300
btrfs: fix folio leak in submit_one_async_extent()
btrfs: fix discard worker infinite loop after disabling discard
Pull tracing fixes from Steven Rostedt:
- Fix sample code that uses trace_array_printk()
The sample code for in kernel use of trace_array (that creates an
instance for use within the kernel) and shows how to use
trace_array_printk() that writes into the created instance, used
trace_printk_init_buffers(). But that function is used to initialize
normal trace_printk() and produces the NOTICE banner which is not
needed for use of trace_array_printk(). The function to initialize
that is trace_array_init_printk() that takes the created trace array
instance as a parameter.
Update the sample code to reflect the proper usage.
- Fix preemption count output for stacktrace event
The tracing buffer shows the preempt count level when an event
executes. Because writing the event itself disables preemption, this
needs to be accounted for when recording. The stacktrace event did
not account for this so the output of the stacktrace event showed
preemption was disabled while the event that triggered the stacktrace
shows preemption is enabled and this leads to confusion. Account for
preemption being disabled for the stacktrace event.
The same happened for stack traces triggered by function tracer.
- Fix persistent ring buffer when trace_pipe is used
The ring buffer swaps the reader page with the next page to read from
the write buffer when trace_pipe is used. If there's only a page of
data in the ring buffer, this swap will cause the "commit" pointer
(last data written) to be on the reader page. If more data is written
to the buffer, it is added to the reader page until it falls off back
into the write buffer.
If the system reboots and the commit pointer is still on the reader
page, even if new data was written, the persistent buffer validator
will miss finding the commit pointer because it only checks the write
buffer and does not check the reader page. This causes the validator
to fail the validation and clear the buffer, where the new data is
lost.
There was a check for this, but it checked the "head pointer", which
was incorrect, because the "head pointer" always stays on the write
buffer and is the next page to swap out for the reader page. Fix the
logic to catch this case and allow the user to still read the data
after reboot.
* tag 'trace-v6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Fix persistent buffer when commit page is the reader page
ftrace: Fix preemption accounting for stacktrace filter command
ftrace: Fix preemption accounting for stacktrace trigger command
tracing: samples: Initialize trace_array_printk() with the correct function
The ring buffer is made up of sub buffers (sometimes called pages as they
are by default PAGE_SIZE). It has the following "pages":
"tail page" - this is the page that the next write will write to
"head page" - this is the page that the reader will swap the reader page with.
"reader page" - This belongs to the reader, where it will swap the head
page from the ring buffer so that the reader does not
race with the writer.
The writer may end up on the "reader page" if the ring buffer hasn't
written more than one page, where the "tail page" and the "head page" are
the same.
The persistent ring buffer has meta data that points to where these pages
exist so on reboot it can re-create the pointers to the cpu_buffer
descriptor. But when the commit page is on the reader page, the logic is
incorrect.
The check to see if the commit page is on the reader page checked if the
head page was the reader page, which would never happen, as the head page
is always in the ring buffer. The correct check would be to test if the
commit page is on the reader page. If that's the case, then it can exit
out early as the commit page is only on the reader page when there's only
one page of data in the buffer. There's no reason to iterate the ring
buffer pages to find the "commit page" as it is already found.
To trigger this bug:
# echo 1 > /sys/kernel/tracing/instances/boot_mapped/events/syscalls/sys_enter_fchownat/enable
# touch /tmp/x
# chown sshd /tmp/x
# reboot
On boot up, the dmesg will have:
Ring buffer meta [0] is from previous boot!
Ring buffer meta [1] is from previous boot!
Ring buffer meta [2] is from previous boot!
Ring buffer meta [3] is from previous boot!
Ring buffer meta [4] commit page not found
Ring buffer meta [5] is from previous boot!
Ring buffer meta [6] is from previous boot!
Ring buffer meta [7] is from previous boot!
Where the buffer on CPU 4 had a "commit page not found" error and that
buffer is cleared and reset causing the output to be empty and the data lost.
When it works correctly, it has:
# cat /sys/kernel/tracing/instances/boot_mapped/trace_pipe
<...>-1137 [004] ..... 998.205323: sys_enter_fchownat: __syscall_nr=0x104 (260) dfd=0xffffff9c (4294967196) filename=(0xffffc90000a0002c) user=0x3e8 (1000) group=0xffffffff (4294967295) flag=0x0 (0
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250513115032.3e0b97f7@gandalf.local.home
Fixes: 5f3b6e839f ("ring-buffer: Validate boot range memory events")
Reported-by: Tasos Sahanidis <tasos@tasossah.com>
Tested-by: Tasos Sahanidis <tasos@tasossah.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When using the stacktrace trigger command to trace syscalls, the
preemption count was consistently reported as 1 when the system call
event itself had 0 (".").
For example:
root@ubuntu22-vm:/sys/kernel/tracing/events/syscalls/sys_enter_read
$ echo stacktrace > trigger
$ echo 1 > enable
sshd-416 [002] ..... 232.864910: sys_read(fd: a, buf: 556b1f3221d0, count: 8000)
sshd-416 [002] ...1. 232.864913: <stack trace>
=> ftrace_syscall_enter
=> syscall_trace_enter
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
The root cause is that the trace framework disables preemption in __DO_TRACE before
invoking the trigger callback.
Use the tracing_gen_ctx_dec() that will accommodate for the increase of
the preemption count in __DO_TRACE when calling the callback. The result
is the accurate reporting of:
sshd-410 [004] ..... 210.117660: sys_read(fd: 4, buf: 559b725ba130, count: 40000)
sshd-410 [004] ..... 210.117662: <stack trace>
=> ftrace_syscall_enter
=> syscall_trace_enter
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
Cc: stable@vger.kernel.org
Fixes: ce33c845b0 ("tracing: Dump stacktrace trigger to the corresponding instance")
Link: https://lore.kernel.org/20250512094246.1167956-1-dolinux.peng@gmail.com
Signed-off-by: pengdonglin <dolinux.peng@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull execve fix from Kees Cook:
"This fixes a corner case for ASLR-disabled static-PIE brk collision
with vdso allocations:
- binfmt_elf: Move brk for static PIE even if ASLR disabled"
* tag 'execve-v6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt_elf: Move brk for static PIE even if ASLR disabled
Pull SoC fixes from Arnd Bergmann:
"These all address issues in devicetree files:
- The Rockchip rk3588j are now limited the same way as the vendor
kernel, to allow room for the industrial-grade temperature ranges.
- Seven more Rockchip fixes address minor issues with specific boards
- Invalid clk controller references in multiple amlogic chips, plus
one accidentally disabled audio on clock
- Two devicetree fixes for i.MX8MP boards, both for incorrect
regulator settings
- A power domain change for apple laptop touchbar, fixing
suspend/resume problems
- An incorrect DMA controller setting for sophgo cv18xx chips"
* tag 'soc-fixes-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: amazon: Fix simple-bus node name schema warnings
MAINTAINERS: delete email for Shiraz Hashim
arm64: dts: imx8mp-var-som: Fix LDO5 shutdown causing SD card timeout
arm64: dts: imx8mp: use 800MHz NoC OPP for nominal drive mode
arm64: dts: amlogic: dreambox: fix missing clkc_audio node
riscv: dts: sophgo: fix DMA data-width configuration for CV18xx
arm64: dts: rockchip: fix Sige5 RTC interrupt pin
arm64: dts: rockchip: Assign RT5616 MCLK rate on rk3588-friendlyelec-cm3588
arm64: dts: rockchip: Align wifi node name with bindings in CB2
arm64: dts: amlogic: g12: fix reference to unknown/untested PWM clock
arm64: dts: amlogic: gx: fix reference to unknown/untested PWM clock
ARM: dts: amlogic: meson8b: fix reference to unknown/untested PWM clock
ARM: dts: amlogic: meson8: fix reference to unknown/untested PWM clock
arm64: dts: apple: touchbar: Mark ps_dispdfr_be as always-on
mailmap: Update email for Asahi Lina
arm64: dts: rockchip: Fix mmc-pwrseq clock name on rock-pi-4
arm64: dts: rockchip: Use "regulator-fixed" for btreg on px30-engicam for vcc3v3-btreg
arm64: dts: rockchip: Add pinmuxing for eMMC on QNAP TS433
arm64: dts: rockchip: Remove overdrive-mode OPPs from RK3588J SoC dtsi
arm64: dts: rockchip: Allow Turing RK1 cooling fan to spin down
Fix several build errors when CONFIG_MODULES=n, including the following:
../arch/x86/kernel/alternative.c:195:25: error: incomplete definition of type 'struct module'
195 | for (int i = 0; i < mod->its_num_pages; i++) {
Fixes: 872df34d7c ("x86/its: Use dynamic thunks for indirect branches")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull probes fixes from Masami Hiramatsu:
- fprobe: Fix RCU warning message in list traversal
fprobe_module_callback() using hlist_for_each_entry_rcu() traverse
the fprobe list but it locks fprobe_mutex() instead of rcu lock
because it is enough. So add lockdep_is_held() to avoid warning.
- tracing: eprobe: Add missing trace_probe_log_clear for eprobe
__trace_eprobe_create() uses trace_probe_log but forgot to clear it
at exit. Add trace_probe_log_clear() calls.
- tracing: probes: Fix possible race in trace_probe_log APIs
trace_probe_log APIs are used in probe event (dynamic_events,
kprobe_events and uprobe_events) creation. Only dynamic_events uses
the dyn_event_ops_mutex mutex to serialize it. This makes kprobe and
uprobe events to lock the same mutex to serialize its creation to
avoid race in trace_probe_log APIs.
* tag 'probes-fixes-v6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: probes: Fix a possible race in trace_probe_log APIs
tracing: add missing trace_probe_log_clear for eprobes
tracing: fprobe: Fix RCU warning message in list traversal
Since the shared trace_probe_log variable can be accessed and
modified via probe event create operation of kprobe_events,
uprobe_events, and dynamic_events, it should be protected.
In the dynamic_events, all operations are serialized by
`dyn_event_ops_mutex`. But kprobe_events and uprobe_events
interfaces are not serialized.
To solve this issue, introduces dyn_event_create(), which runs
create() operation under the mutex, for kprobe_events and
uprobe_events. This also uses lockdep to check the mutex is
held when using trace_probe_log* APIs.
Link: https://lore.kernel.org/all/174684868120.551552.3068655787654268804.stgit@devnote2/
Reported-by: Paul Cacheux <paulcacheux@gmail.com>
Closes: https://lore.kernel.org/all/20250510074456.805a16872b591e2971a4d221@kernel.org/
Fixes: ab105a4fb8 ("tracing: Use tracing error_log with probe events")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Pull sched_ext fixes from Tejun Heo:
"A little bit invasive for rc6 but they're important fixes, pass tests
fine and won't break anything outside sched_ext:
- scx_bpf_cpuperf_set() calls internal functions that require the rq
to be locked. It assumed that the BPF caller has rq locked but
that's not always true. Fix it by tracking whether rq is currently
held by the CPU and grabbing it if necessary
- bpf_iter_scx_dsq_new() was leaving the DSQ iterator in an
uninitialized state after an error. However, next() and destroy()
can be called on an iterator which failed initialization and thus
they always need to be initialized even after an init error. Fix by
always initializing the iterator
- Remove duplicate BTF_ID_FLAGS() entries"
* tag 'sched_ext-for-6.15-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: bpf_iter_scx_dsq_new() should always initialize iterator
sched_ext: Fix rq lock state in hotplug ops
sched_ext: Remove duplicate BTF_ID_FLAGS definitions
sched_ext: Fix missing rq lock in scx_bpf_cpuperf_set()
sched_ext: Track currently locked rq
Pull cgroup fix from Tejun Heo:
"One low-risk patch to fix a cpuset bug where it over-eagerly tries to
modify CPU affinity of kernel threads"
* tag 'cgroup-for-6.15-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Extend kthread_is_per_cpu() check to all PF_NO_SETAFFINITY tasks
The Btrfs documentation states that if the commit value is greater than
300 a warning should be issued. The warning was accidentally lost in the
new mount API update.
Fixes: 6941823cc8 ("btrfs: remove old mount API code")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Kyoji Ogasawara <sawara04.o@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If btrfs_reserve_extent() fails while submitting an async_extent for a
compressed write, then we fail to call free_async_extent_pages() on the
async_extent and leak its folios. A likely cause for such a failure
would be btrfs_reserve_extent() failing to find a large enough
contiguous free extent for the compressed extent.
I was able to reproduce this by:
1. mount with compress-force=zstd:3
2. fallocating most of a filesystem to a big file
3. fragmenting the remaining free space
4. trying to copy in a file which zstd would generate large compressed
extents for (vmlinux worked well for this)
Step 4. hits the memory leak and can be repeated ad nauseam to
eventually exhaust the system memory.
Fix this by detecting the case where we fallback to uncompressed
submission for a compressed async_extent and ensuring that we call
free_async_extent_pages().
Fixes: 131a821a24 ("btrfs: fallback if compressed IO fails for ENOSPC")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Co-developed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If the discard worker is running and there's currently only one block
group, that block group is a data block group, it's in the unused block
groups discard list and is being used (it got an extent allocated from it
after becoming unused), the worker can end up in an infinite loop if a
transaction abort happens or the async discard is disabled (during remount
or unmount for example).
This happens like this:
1) Task A, the discard worker, is at peek_discard_list() and
find_next_block_group() returns block group X;
2) Block group X is in the unused block groups discard list (its discard
index is BTRFS_DISCARD_INDEX_UNUSED) since at some point in the past
it become an unused block group and was added to that list, but then
later it got an extent allocated from it, so its ->used counter is not
zero anymore;
3) The current transaction is aborted by task B and we end up at
__btrfs_handle_fs_error() in the transaction abort path, where we call
btrfs_discard_stop(), which clears BTRFS_FS_DISCARD_RUNNING from
fs_info, and then at __btrfs_handle_fs_error() we set the fs to RO mode
(setting SB_RDONLY in the super block's s_flags field);
4) Task A calls __add_to_discard_list() with the goal of moving the block
group from the unused block groups discard list into another discard
list, but at __add_to_discard_list() we end up doing nothing because
btrfs_run_discard_work() returns false, since the super block has
SB_RDONLY set in its flags and BTRFS_FS_DISCARD_RUNNING is not set
anymore in fs_info->flags. So block group X remains in the unused block
groups discard list;
5) Task A then does a goto into the 'again' label, calls
find_next_block_group() again we gets block group X again. Then it
repeats the previous steps over and over since there are not other
block groups in the discard lists and block group X is never moved
out of the unused block groups discard list since
btrfs_run_discard_work() keeps returning false and therefore
__add_to_discard_list() doesn't move block group X out of that discard
list.
When this happens we can get a soft lockup report like this:
[71.957] watchdog: BUG: soft lockup - CPU#0 stuck for 27s! [kworker/u4:3:97]
[71.957] Modules linked in: xfs af_packet rfkill (...)
[71.957] CPU: 0 UID: 0 PID: 97 Comm: kworker/u4:3 Tainted: G W 6.14.2-1-default #1 openSUSE Tumbleweed 968795ef2b1407352128b466fe887416c33af6fa
[71.957] Tainted: [W]=WARN
[71.957] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
[71.957] Workqueue: btrfs_discard btrfs_discard_workfn [btrfs]
[71.957] RIP: 0010:btrfs_discard_workfn+0xc4/0x400 [btrfs]
[71.957] Code: c1 01 48 83 (...)
[71.957] RSP: 0018:ffffafaec03efe08 EFLAGS: 00000246
[71.957] RAX: ffff897045500000 RBX: ffff8970413ed8d0 RCX: 0000000000000000
[71.957] RDX: 0000000000000001 RSI: ffff8970413ed8d0 RDI: 0000000a8f1272ad
[71.957] RBP: 0000000a9d61c60e R08: ffff897045500140 R09: 8080808080808080
[71.957] R10: ffff897040276800 R11: fefefefefefefeff R12: ffff8970413ed860
[71.957] R13: ffff897045500000 R14: ffff8970413ed868 R15: 0000000000000000
[71.957] FS: 0000000000000000(0000) GS:ffff89707bc00000(0000) knlGS:0000000000000000
[71.957] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[71.957] CR2: 00005605bcc8d2f0 CR3: 000000010376a001 CR4: 0000000000770ef0
[71.957] PKRU: 55555554
[71.957] Call Trace:
[71.957] <TASK>
[71.957] process_one_work+0x17e/0x330
[71.957] worker_thread+0x2ce/0x3f0
[71.957] ? __pfx_worker_thread+0x10/0x10
[71.957] kthread+0xef/0x220
[71.957] ? __pfx_kthread+0x10/0x10
[71.957] ret_from_fork+0x34/0x50
[71.957] ? __pfx_kthread+0x10/0x10
[71.957] ret_from_fork_asm+0x1a/0x30
[71.957] </TASK>
[71.957] Kernel panic - not syncing: softlockup: hung tasks
[71.987] CPU: 0 UID: 0 PID: 97 Comm: kworker/u4:3 Tainted: G W L 6.14.2-1-default #1 openSUSE Tumbleweed 968795ef2b1407352128b466fe887416c33af6fa
[71.989] Tainted: [W]=WARN, [L]=SOFTLOCKUP
[71.989] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
[71.991] Workqueue: btrfs_discard btrfs_discard_workfn [btrfs]
[71.992] Call Trace:
[71.993] <IRQ>
[71.994] dump_stack_lvl+0x5a/0x80
[71.994] panic+0x10b/0x2da
[71.995] watchdog_timer_fn.cold+0x9a/0xa1
[71.996] ? __pfx_watchdog_timer_fn+0x10/0x10
[71.997] __hrtimer_run_queues+0x132/0x2a0
[71.997] hrtimer_interrupt+0xff/0x230
[71.998] __sysvec_apic_timer_interrupt+0x55/0x100
[71.999] sysvec_apic_timer_interrupt+0x6c/0x90
[72.000] </IRQ>
[72.000] <TASK>
[72.001] asm_sysvec_apic_timer_interrupt+0x1a/0x20
[72.002] RIP: 0010:btrfs_discard_workfn+0xc4/0x400 [btrfs]
[72.002] Code: c1 01 48 83 (...)
[72.005] RSP: 0018:ffffafaec03efe08 EFLAGS: 00000246
[72.006] RAX: ffff897045500000 RBX: ffff8970413ed8d0 RCX: 0000000000000000
[72.006] RDX: 0000000000000001 RSI: ffff8970413ed8d0 RDI: 0000000a8f1272ad
[72.007] RBP: 0000000a9d61c60e R08: ffff897045500140 R09: 8080808080808080
[72.008] R10: ffff897040276800 R11: fefefefefefefeff R12: ffff8970413ed860
[72.009] R13: ffff897045500000 R14: ffff8970413ed868 R15: 0000000000000000
[72.010] ? btrfs_discard_workfn+0x51/0x400 [btrfs 23b01089228eb964071fb7ca156eee8cd3bf996f]
[72.011] process_one_work+0x17e/0x330
[72.012] worker_thread+0x2ce/0x3f0
[72.013] ? __pfx_worker_thread+0x10/0x10
[72.014] kthread+0xef/0x220
[72.014] ? __pfx_kthread+0x10/0x10
[72.015] ret_from_fork+0x34/0x50
[72.015] ? __pfx_kthread+0x10/0x10
[72.016] ret_from_fork_asm+0x1a/0x30
[72.017] </TASK>
[72.017] Kernel Offset: 0x15000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[72.019] Rebooting in 90 seconds..
So fix this by making sure we move a block group out of the unused block
groups discard list when calling __add_to_discard_list().
Fixes: 2bee7eb8bb ("btrfs: discard one region at a time in async discard")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1242012
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Daniel Vacek <neelx@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull x86 platform drivers fixes from Ilpo Järvinen:
- amd/pmc: Use spurious 8042 quirk with MECHREVO Wujie 14XA
- amd/pmf:
- Ensure Smart PC policies are valid
- Fix memory leak when the engine fails to start
- amd/hsmp: Make amd_hsmp and hsmp_acpi as mutually exclusive drivers
- asus-wmi: Fix wlan_ctrl_by_user detection
- thinkpad_acpi: Add support for NEC Lavie X1475JAS
* tag 'platform-drivers-x86-v6.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: asus-wmi: Fix wlan_ctrl_by_user detection
platform/x86/amd/pmc: Declare quirk_spurious_8042 for MECHREVO Wujie 14XA (GX4HRXL)
platform/x86: thinkpad_acpi: Support also NEC Lavie X1475JAS
platform/x86/amd/hsmp: Make amd_hsmp and hsmp_acpi as mutually exclusive drivers
drivers/platform/x86/amd: pmf: Check for invalid Smart PC Policies
drivers/platform/x86/amd: pmf: Check for invalid sideloaded Smart PC Policies
Pull UDF fix from Jan Kara:
"Fix a bug in UDF inode eviction leading to spewing pointless
error messages"
* tag 'udf_for_v6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Make sure i_lenExtents is uptodate on inode eviction
When using trace_array_printk() on a created instance, the correct
function to use to initialize it is:
trace_array_init_printk()
Not
trace_printk_init_buffer()
The former is a proper function to use, the latter is for initializing
trace_printk() and causes the NOTICE banner to be displayed.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Divya Indi <divya.indi@oracle.com>
Link: https://lore.kernel.org/20250509152657.0f6744d9@gandalf.local.home
Fixes: 89ed42495e ("tracing: Sample module to demonstrate kernel access to Ftrace instances.")
Fixes: 38ce2a9e33 ("tracing: Add trace_array_init_printk() to initialize instance trace_printk() buffers")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull vfs fixes from Christian Brauner:
- Ensure that simple_xattr_list() always includes security.* xattrs
- Fix eventpoll busy loop optimization when combined with timeouts
- Disable swapon() for devices with block sizes greater than page sizes
- Don't call errseq_set() twice during mark_buffer_write_io_error().
Just use mapping_set_error() which takes care to not deference
unconditionally
* tag 'vfs-6.15-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: Remove redundant errseq_set call in mark_buffer_write_io_error.
swapfile: disable swapon for bs > ps devices
fs/eventpoll: fix endless busy loop after timeout has expired
fs/xattr.c: fix simple_xattr_list to always include security.* xattrs
Pull arm64 cBPF BHB mitigation from James Morse:
"This adds the BHB mitigation into the code JITted for cBPF programs as
these can be loaded by unprivileged users via features like seccomp.
The existing mechanisms to disable the BHB mitigation will also
prevent the mitigation being JITted. In addition, cBPF programs loaded
by processes with the SYS_ADMIN capability are not mitigated as these
could equally load an eBPF program that does the same thing.
For good measure, the list of 'k' values for CPU's local mitigations
is updated from the version on arm's website"
* tag 'arm64_cbpf_mitigation_2025_05_08' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: proton-pack: Add new CPUs 'k' values for branch mitigation
arm64: bpf: Only mitigate cBPF programs loaded by unprivileged users
arm64: bpf: Add BHB mitigation to the epilogue for cBPF programs
arm64: proton-pack: Expose whether the branchy loop k value
arm64: proton-pack: Expose whether the platform is mitigated by firmware
arm64: insn: Add support for encoding DSB
Pull x86 ITS mitigation from Dave Hansen:
"Mitigate Indirect Target Selection (ITS) issue.
I'd describe this one as a good old CPU bug where the behavior is
_obviously_ wrong, but since it just results in bad predictions it
wasn't wrong enough to notice. Well, the researchers noticed and also
realized that thus bug undermined a bunch of existing indirect branch
mitigations.
Thus the unusually wide impact on this one. Details:
ITS is a bug in some Intel CPUs that affects indirect branches
including RETs in the first half of a cacheline. Due to ITS such
branches may get wrongly predicted to a target of (direct or indirect)
branch that is located in the second half of a cacheline. Researchers
at VUSec found this behavior and reported to Intel.
Affected processors:
- Cascade Lake, Cooper Lake, Whiskey Lake V, Coffee Lake R, Comet
Lake, Ice Lake, Tiger Lake and Rocket Lake.
Scope of impact:
- Guest/host isolation:
When eIBRS is used for guest/host isolation, the indirect branches
in the VMM may still be predicted with targets corresponding to
direct branches in the guest.
- Intra-mode using cBPF:
cBPF can be used to poison the branch history to exploit ITS.
Realigning the indirect branches and RETs mitigates this attack
vector.
- User/kernel:
With eIBRS enabled user/kernel isolation is *not* impacted by ITS.
- Indirect Branch Prediction Barrier (IBPB):
Due to this bug indirect branches may be predicted with targets
corresponding to direct branches which were executed prior to IBPB.
This will be fixed in the microcode.
Mitigation:
As indirect branches in the first half of cacheline are affected, the
mitigation is to replace those indirect branches with a call to thunk that
is aligned to the second half of the cacheline.
RETs that take prediction from RSB are not affected, but they may be
affected by RSB-underflow condition. So, RETs in the first half of
cacheline are also patched to a return thunk that executes the RET aligned
to second half of cacheline"
* tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftest/x86/bugs: Add selftests for ITS
x86/its: FineIBT-paranoid vs ITS
x86/its: Use dynamic thunks for indirect branches
x86/ibt: Keep IBT disabled during alternative patching
mm/execmem: Unify early execmem_cache behaviour
x86/its: Align RETs in BHB clear sequence to avoid thunking
x86/its: Add support for RSB stuffing mitigation
x86/its: Add "vmexit" option to skip mitigation on some CPUs
x86/its: Enable Indirect Target Selection mitigation
x86/its: Add support for ITS-safe return thunk
x86/its: Add support for ITS-safe indirect thunk
x86/its: Enumerate Indirect Target Selection (ITS) bug
Documentation: x86/bugs/its: Add ITS documentation
Pull x86 IBTI mitigation from Dave Hansen:
"Mitigate Intra-mode Branch History Injection via classic BFP programs
This adds the branch history clearing mitigation to cBPF programs for
x86. Intra-mode BHI attacks via cBPF a.k.a IBTI-History was reported
by researchers at VUSec.
For hardware that doesn't support BHI_DIS_S, the recommended
mitigation is to run the short software sequence followed by the IBHF
instruction after cBPF execution. On hardware that does support
BHI_DIS_S, enable BHI_DIS_S and execute the IBHF after cBPF execution.
The Indirect Branch History Fence (IBHF) is a new instruction that
prevents indirect branch target predictions after the barrier from
using branch history from before the barrier while BHI_DIS_S is
enabled. On older systems this will map to a NOP. It is recommended to
add this fence at the end of the cBPF program to support VM migration.
This instruction is required on newer parts with BHI_NO to fully
mitigate against these attacks.
The current code disables the mitigation for anything running with the
SYS_ADMIN capability bit set. The intention was not to waste time
mitigating a process that has access to anything it wants anyway"
* tag 'ibti-hisory-for-linus-2025-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bhi: Do not set BHI_DIS_S in 32-bit mode
x86/bpf: Add IBHF call at end of classic BPF
x86/bpf: Call branch history clearing sequence on exit
Pull KVM fixes from Paolo Bonzini:
"ARM:
- Avoid use of uninitialized memcache pointer in user_mem_abort()
- Always set HCR_EL2.xMO bits when running in VHE, allowing
interrupts to be taken while TGE=0 and fixing an ugly bug on
AmpereOne that occurs when taking an interrupt while clearing the
xMO bits (AC03_CPU_36)
- Prevent VMMs from hiding support for AArch64 at any EL virtualized
by KVM
- Save/restore the host value for HCRX_EL2 instead of restoring an
incorrect fixed value
- Make host_stage2_set_owner_locked() check that the entire requested
range is memory rather than just the first page
RISC-V:
- Add missing reset of smstateen CSRs
x86:
- Forcibly leave SMM on SHUTDOWN interception on AMD CPUs to avoid
causing problems due to KVM stuffing INIT on SHUTDOWN (KVM needs to
sanitize the VMCB as its state is undefined after SHUTDOWN,
emulating INIT is the least awful choice).
- Track the valid sync/dirty fields in kvm_run as a u64 to ensure KVM
KVM doesn't goof a sanity check in the future.
- Free obsolete roots when (re)loading the MMU to fix a bug where
pre-faulting memory can get stuck due to always encountering a
stale root.
- When dumping GHCB state, use KVM's snapshot instead of the raw GHCB
page to print state, so that KVM doesn't print stale/wrong
information.
- When changing memory attributes (e.g. shared <=> private), add
potential hugepage ranges to the mmu_invalidate_range_{start,end}
set so that KVM doesn't create a shared/private hugepage when the
the corresponding attributes will become mixed (the attributes are
commited *after* KVM finishes the invalidation).
- Rework the SRSO mitigation to enable BP_SPEC_REDUCE only when KVM
has at least one active VM. Effectively BP_SPEC_REDUCE when KVM is
loaded led to very measurable performance regressions for non-KVM
workloads"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Set/clear SRSO's BP_SPEC_REDUCE on 0 <=> 1 VM count transitions
KVM: arm64: Fix memory check in host_stage2_set_owner_locked()
KVM: arm64: Kill HCRX_HOST_FLAGS
KVM: arm64: Properly save/restore HCRX_EL2
KVM: arm64: selftest: Don't try to disable AArch64 support
KVM: arm64: Prevent userspace from disabling AArch64 support at any virtualisable EL
KVM: arm64: Force HCR_EL2.xMO to 1 at all times in VHE mode
KVM: arm64: Fix uninitialized memcache pointer in user_mem_abort()
KVM: x86/mmu: Prevent installing hugepages when mem attributes are changing
KVM: SVM: Update dump_ghcb() to use the GHCB snapshot fields
KVM: RISC-V: reset smstateen CSRs
KVM: x86/mmu: Check and free obsolete roots in kvm_mmu_reload()
KVM: x86: Check that the high 32bits are clear in kvm_arch_vcpu_ioctl_run()
KVM: SVM: Forcibly leave SMM mode on SHUTDOWN interception
Pull x86 fix from Ingo Molnar:
"Fix a boot regression on very old x86 CPUs without CPUID support"
* tag 'x86-urgent-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Consolidate the loader enablement checking
Pull misc timers fixes from Ingo Molnar:
- Fix time keeping bugs in CLOCK_MONOTONIC_COARSE clocks
- Work around absolute relocations into vDSO code that GCC erroneously
emits in certain arm64 build environments
- Fix a false positive lockdep warning in the i8253 clocksource driver
* tag 'timers-urgent-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/i8253: Use raw_spinlock_irqsave() in clockevent_i8253_disable()
arm64: vdso: Work around invalid absolute relocations from GCC
timekeeping: Prevent coarse clocks going backwards
Pull input fixes from Dmitry Torokhov:
- Synaptics touchpad on multiple laptops (Dynabook Portege X30L-G,
Dynabook Portege X30-D, TUXEDO InfinityBook Pro 14 v5, Dell Precision
M3800, HP Elitebook 850 G1) switched from PS/2 to SMBus mode
- a number of new controllers added to xpad driver: HORI Drum
controller, PowerA Fusion Pro 4, PowerA MOGA XP-Ultra controller,
8BitDo Ultimate 2 Wireless Controller, 8BitDo Ultimate 3-mode
Controller, Hyperkin DuchesS Xbox One controller
- fixes to xpad driver to properly handle Mad Catz JOYTECH NEO SE
Advanced and PDP Mirror's Edge Official controllers
- fixes to xpad driver to properly handle "Share" button on some
controllers
- a fix for device initialization timing and for waking up the
controller in cyttsp5 driver
- a fix for hisi_powerkey driver to properly wake up from s2idle state
- other assorted cleanups and fixes
* tag 'input-for-v6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - fix xpad_device sorting
Input: xpad - add support for several more controllers
Input: xpad - fix Share button on Xbox One controllers
Input: xpad - fix two controller table values
Input: hisi_powerkey - enable system-wakeup for s2idle
Input: synaptics - enable InterTouch on Dell Precision M3800
Input: synaptics - enable InterTouch on TUXEDO InfinityBook Pro 14 v5
Input: synaptics - enable InterTouch on Dynabook Portege X30L-G
Input: synaptics - enable InterTouch on Dynabook Portege X30-D
Input: synaptics - enable SMBus for HP Elitebook 850 G1
Input: mtk-pmic-keys - fix possible null pointer dereference
Input: xpad - add support for 8BitDo Ultimate 2 Wireless Controller
Input: cyttsp5 - fix power control issue on wakeup
MAINTAINERS: .mailmap: update Mattijs Korpershoek's email address
dt-bindings: mediatek,mt6779-keypad: Update Mattijs' email address
Input: stmpe-ts - use module alias instead of device table
Input: cyttsp5 - ensure minimum reset pulse width
Input: sparcspkr - avoid unannotated fall-through
input/joystick: magellan: Mark __nonstring look-up table
Pull memblock fixes from Mike Rapoport:
- Mark set_high_memory() as __init to fix section mismatch
- Accept memory allocated in memblock_double_array() to mitigate crash
of SNP guests
* tag 'fixes-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: Accept allocated memory before use in memblock_double_array()
mm,mm_init: Mark set_high_memory as __init
The Share button, if present, is always one of two offsets from the end of the
file, depending on the presence of a specific interface. As we lack parsing for
the identify packet we can't automatically determine the presence of that
interface, but we can hardcode which of these offsets is correct for a given
controller.
More controllers are probably fixable by adding the MAP_SHARE_BUTTON in the
future, but for now I only added the ones that I have the ability to test
directly.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-2-vi@endrift.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull misc hotfixes from Andrew Morton:
"22 hotfixes. 13 are cc:stable and the remainder address post-6.14
issues or aren't considered necessary for -stable kernels.
About half are for MM. Five OCFS2 fixes and a few MAINTAINERS updates"
* tag 'mm-hotfixes-stable-2025-05-10-14-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
mm: fix folio_pte_batch() on XEN PV
nilfs2: fix deadlock warnings caused by lock dependency in init_nilfs()
mm/hugetlb: copy the CMA flag when demoting
mm, swap: fix false warning for large allocation with !THP_SWAP
selftests/mm: fix a build failure on powerpc
selftests/mm: fix build break when compiling pkey_util.c
mm: vmalloc: support more granular vrealloc() sizing
tools/testing/selftests: fix guard region test tmpfs assumption
ocfs2: stop quota recovery before disabling quotas
ocfs2: implement handshaking with ocfs2 recovery thread
ocfs2: switch osb->disable_recovery to enum
mailmap: map Uwe's BayLibre addresses to a single one
MAINTAINERS: add mm THP section
mm/userfaultfd: fix uninitialized output field for -EAGAIN race
selftests/mm: compaction_test: support platform with huge mount of memory
MAINTAINERS: add core mm section
ocfs2: fix panic in failed foilio allocation
mm/huge_memory: fix dereferencing invalid pmd migration entry
MAINTAINERS: add reverse mapping section
x86: disable image size check for test builds
...
Pull driver core fix from Greg KH:
"Here is a single driver core fix for a regression for platform devices
that is a regression from a change that went into 6.15-rc1 that
affected Pixel devices. It has been in linux-next for over a week with
no reported problems"
* tag 'driver-core-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
platform: Fix race condition during DMA configure at IOMMU probe time
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for 6.15-rc6. Included in here
are:
- typec driver fixes
- usbtmc ioctl fixes
- xhci driver fixes
- cdnsp driver fixes
- some gadget driver fixes
Nothing really major, just all little stuff that people have reported
being issues. All of these have been in linux-next this week with no
reported issues"
* tag 'usb-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: dbc: Avoid event polling busyloop if pending rx transfers are inactive.
usb: xhci: Don't trust the EP Context cycle bit when moving HW dequeue
usb: usbtmc: Fix erroneous generic_read ioctl return
usb: usbtmc: Fix erroneous wait_srq ioctl return
usb: usbtmc: Fix erroneous get_stb ioctl error returns
usb: typec: tcpm: delay SNK_TRY_WAIT_DEBOUNCE to SRC_TRYWAIT transition
USB: usbtmc: use interruptible sleep in usbtmc_read
usb: cdnsp: fix L1 resume issue for RTL_REVISION_NEW_LPM version
usb: typec: ucsi: displayport: Fix NULL pointer access
usb: typec: ucsi: displayport: Fix deadlock
usb: misc: onboard_usb_dev: fix support for Cypress HX3 hubs
usb: uhci-platform: Make the clock really optional
usb: dwc3: gadget: Make gadget_wakeup asynchronous
usb: gadget: Use get_status callback to set remote wakeup capability
usb: gadget: f_ecm: Add get_status callback
usb: host: tegra: Prevent host controller crash when OTG port is used
usb: cdnsp: Fix issue with resuming from L1
usb: gadget: tegra-xudc: ACK ST_RC after clearing CTRL_RUN
Pull staging driver fixes from Greg KH:
"Here are three small staging driver fixes for 6.15-rc6. These are:
- bcm2835-camera driver fix
- two axis-fifo driver fixes
All of these have been in linux-next for a few weeks with no reported
issues"
* tag 'staging-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: axis-fifo: Remove hardware resets for user errors
staging: axis-fifo: Correct handling of tx_fifo_depth for size validation
staging: bcm2835-camera: Initialise dev in v4l2_dev
Pull char/misc/IIO driver fixes from Greg KH:
"Here are a bunch of small driver fixes (mostly all IIO) for 6.15-rc6.
Included in here are:
- loads of tiny IIO driver fixes for reported issues
- hyperv driver fix for a much-reported and worked on sysfs ring
buffer creation bug
All of these have been in linux-next for over a week (the IIO ones for
many weeks now), with no reported issues"
* tag 'char-misc-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (30 commits)
Drivers: hv: Make the sysfs node size for the ring buffer dynamic
uio_hv_generic: Fix sysfs creation path for ring buffer
iio: adis16201: Correct inclinometer channel resolution
iio: adc: ad7606: fix serial register access
iio: pressure: mprls0025pa: use aligned_s64 for timestamp
iio: imu: adis16550: align buffers for timestamp
staging: iio: adc: ad7816: Correct conditional logic for store mode
iio: adc: ad7266: Fix potential timestamp alignment issue.
iio: adc: ad7768-1: Fix insufficient alignment of timestamp.
iio: adc: dln2: Use aligned_s64 for timestamp
iio: accel: adxl355: Make timestamp 64-bit aligned using aligned_s64
iio: temp: maxim-thermocouple: Fix potential lack of DMA safe buffer.
iio: chemical: pms7003: use aligned_s64 for timestamp
iio: chemical: sps30: use aligned_s64 for timestamp
iio: imu: inv_mpu6050: align buffer for timestamp
iio: imu: st_lsm6dsx: Fix wakeup source leaks on device unbind
iio: adc: qcom-spmi-iadc: Fix wakeup source leaks on device unbind
iio: accel: fxls8962af: Fix wakeup source leaks on device unbind
iio: adc: ad7380: fix event threshold shift
iio: hid-sensor-prox: Fix incorrect OFFSET calculation
...
Pull i2c fixes from Wolfram Sang:
- omap: use correct function to read from device tree
- MAINTAINERS: remove Seth from ISMT maintainership
* tag 'i2c-for-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Remove entry for Seth Heasley
i2c: omap: fix deprecated of_property_read_bool() use
Pull xen fixes from Juergen Gross:
- A fix for the xenbus driver allowing to use a PVH Dom0 with
Xenstore running in another domain
- A fix for the xenbus driver addressing a rare race condition
resulting in NULL dereferences and other problems
- A fix for the xen-swiotlb driver fixing a problem seen on Arm
platforms
* tag 'for-linus-6.15a-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xenbus: Use kref to track req lifetime
xenbus: Allow PVH dom0 a non-local xenstore
xen: swiotlb: Use swiotlb bouncing if kmalloc allocation demands it
Pull mount fixes from Al Viro:
"A couple of races around legalize_mnt vs umount (both fairly old and
hard to hit) plus two bugs in move_mount(2) - both around 'move
detached subtree in place' logics"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix IS_MNT_PROPAGATING uses
do_move_mount(): don't leak MNTNS_PROPAGATING on failures
do_umount(): add missing barrier before refcount checks in sync case
__legitimize_mnt(): check for MNT_SYNC_UMOUNT should be under mount_lock
KVM x86 fixes for 6.15-rcN
- Forcibly leave SMM on SHUTDOWN interception on AMD CPUs to avoid causing
problems due to KVM stuffing INIT on SHUTDOWN (KVM needs to sanitize the
VMCB as its state is undefined after SHUTDOWN, emulating INIT is the
least awful choice).
- Track the valid sync/dirty fields in kvm_run as a u64 to ensure KVM
KVM doesn't goof a sanity check in the future.
- Free obsolete roots when (re)loading the MMU to fix a bug where
pre-faulting memory can get stuck due to always encountering a stale
root.
- When dumping GHCB state, use KVM's snapshot instead of the raw GHCB page
to print state, so that KVM doesn't print stale/wrong information.
- When changing memory attributes (e.g. shared <=> private), add potential
hugepage ranges to the mmu_invalidate_range_{start,end} set so that KVM
doesn't create a shared/private hugepage when the the corresponding
attributes will become mixed (the attributes are commited *after* KVM
finishes the invalidation).
- Rework the SRSO mitigation to enable BP_SPEC_REDUCE only when KVM has at
least one active VM. Effectively BP_SPEC_REDUCE when KVM is loaded led
to very measurable performance regressions for non-KVM workloads.
KVM/arm64 fixes for 6.15, round #3
- Avoid use of uninitialized memcache pointer in user_mem_abort()
- Always set HCR_EL2.xMO bits when running in VHE, allowing interrupts
to be taken while TGE=0 and fixing an ugly bug on AmpereOne that
occurs when taking an interrupt while clearing the xMO bits
(AC03_CPU_36)
- Prevent VMMs from hiding support for AArch64 at any EL virtualized by
KVM
- Save/restore the host value for HCRX_EL2 instead of restoring an
incorrect fixed value
- Make host_stage2_set_owner_locked() check that the entire requested
range is memory rather than just the first page
i.MX fixes for 6.15, 2nd round:
- One more i.MX8MP nominal drive mode DT fix from Ahmad Fatoum to use
800MHz NoC OPP
- A imx8mp-var-som DT change from Himanshu Bhavani to fix SD card
timeout caused by LDO5
* tag 'imx-fixes-6.15-2' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mp-var-som: Fix LDO5 shutdown causing SD card timeout
arm64: dts: imx8mp: use 800MHz NoC OPP for nominal drive mode
Link: https://lore.kernel.org/r/aB6h/woeyG1bSo12@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull smb client fixes from Steve French:
- Fix dentry leak which can cause umount crash
- Add warning for parse contexts error on compounded operation
* tag '6.15-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: Avoid race in open_cached_dir with lease breaks
smb3 client: warn when parse contexts returns error on compounded operation
