schedule_delayed_work does not push back the work if it was already
scheduled before, so amdgpu_device_delay_enable_gfx_off ran ~100 ms
after the first time GFXOFF was disabled and re-enabled, even if GFXOFF
was disabled and re-enabled again during those 100 ms.
This resulted in frame drops / stutter with the upcoming mutter 41
release on Navi 14, due to constantly enabling GFXOFF in the HW and
disabling it again (for getting the GPU clock counter).
To fix this, call cancel_delayed_work_sync when the disable count
transitions from 0 to 1, and only schedule the delayed work on the
reverse transition, not if the disable count was already 0. This makes
sure the delayed work doesn't run at unexpected times, and allows it to
be lock-free.
v2:
* Use cancel_delayed_work_sync & mutex_trylock instead of
mod_delayed_work.
v3:
* Make amdgpu_device_delay_enable_gfx_off lock-free (Christian König)
v4:
* Fix race condition between amdgpu_gfx_off_ctrl incrementing
adev->gfx.gfx_off_req_count and amdgpu_device_delay_enable_gfx_off
checking for it to be 0 (Evan Quan)
Cc: stable@vger.kernel.org
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> # v3
Acked-by: Christian König <christian.koenig@amd.com> # v3
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No longer required now that userspace can't touch anything that might
need it, and should fix DRM MM operations racing with each other, and
the random hangs/crashes that come with that.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Long ago, there had been plans for making use of a bunch of these APIs
from userspace and there's various checks in place to stop misbehaving.
Countless other projects have occurred in the meantime, and the pieces
didn't finish falling into place for that to happen.
They will (hopefully) in the not-too-distant future, but it won't look
quite as insane. The super checks are causing problems right now, and
are going to be removed.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
I honestly don't even know why... These have never been used.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Should fix some initial modeset failures on (at least) Ampere boards.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
When booted with multiple displays attached, the EFI GOP driver on (at
least) Ampere, can leave DP links powered up that aren't being used to
display anything. This confuses our tracking of SOR routing, with the
likely result being a failed modeset and display engine hang.
Fix this by (ab?)using the DisableLT IED script to power-down the link,
restoring HW to a state the driver expects.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[Why]
Userspace should get back a copy of drm_wait_vblank that's been modified
even when drm_wait_vblank_ioctl returns a failure.
Rationale:
drm_wait_vblank_ioctl modifies the request and expects the user to read
it back. When the type is RELATIVE, it modifies it to ABSOLUTE and updates
the sequence to become current_vblank_count + sequence (which was
RELATIVE), but now it became ABSOLUTE.
drmWaitVBlank (in libdrm) expects this to be the case as it modifies
the request to be Absolute so it expects the sequence to would have been
updated.
The change is in compat_drm_wait_vblank, which is called by
drm_compat_ioctl. This change of copying the data back regardless of the
return number makes it en par with drm_ioctl, which always copies the
data before returning.
[How]
Return from the function after everything has been copied to user.
Fixes IGT:kms_flip::modeset-vs-vblank-race-interruptible
Tested on ChromeOS Trogdor(msm)
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Mark Yacoub <markyacoub@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210812194917.1703356-1-markyacoub@chromium.org
[Why]
DM initializes VM context after DMCUB initialization.
This results in loss of DCN_VM_CONTEXT registers after z10.
[How]
Notify DMCUB when VM setup is complete, and have DMCUB
save init registers.
v2: squash in CONFIG_DRM_AMD_DC_DCN3_1 fix
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
KFDSVMRangeTest.SetGetAttributesTest randomly fails in stress test.
Note: Google Test filter = KFDSVMRangeTest.*
[==========] Running 18 tests from 1 test case.
[----------] Global test environment set-up.
[----------] 18 tests from KFDSVMRangeTest
[ RUN ] KFDSVMRangeTest.BasicSystemMemTest
[ OK ] KFDSVMRangeTest.BasicSystemMemTest (30 ms)
[ RUN ] KFDSVMRangeTest.SetGetAttributesTest
[ ] Get default atrributes
/home/yifan/brahma/libhsakmt/tests/kfdtest/src/KFDSVMRangeTest.cpp:154: Failure
Value of: expectedDefaultResults[i]
Actual: 4294967295
Expected: outputAttributes[i].value
Which is: 0
/home/yifan/brahma/libhsakmt/tests/kfdtest/src/KFDSVMRangeTest.cpp:154: Failure
Value of: expectedDefaultResults[i]
Actual: 4294967295
Expected: outputAttributes[i].value
Which is: 0
/home/yifan/brahma/libhsakmt/tests/kfdtest/src/KFDSVMRangeTest.cpp:152: Failure
Value of: expectedDefaultResults[i]
Actual: 4
Expected: outputAttributes[i].type
Which is: 2
[ ] Setting/Getting atrributes
[ FAILED ]
the root cause is that svm work queue has not finished when svm_range_get_attr is called, thus
some garbage svm interval tree data make svm_range_get_attr get wrong result. Flush work queue before
iterate svm interval tree.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In 69de4421bb ("drm/ttm: Initialize debugfs from
ttm_global_init()"), ttm_global_init was changed so that if creation
of the debugfs global root directory fails, ttm_global_init will bail
out early and return an error, leading to initialization failure of
DRM drivers. However, not every system will be using debugfs. On such
a system, debugfs directory creation can be expected to fail, but DRM
drivers must still be usable. This changes it so that if creation of
TTM's debugfs root directory fails, then no biggie: keep calm and
carry on.
Fixes: 69de4421bb ("drm/ttm: Initialize debugfs from ttm_global_init()")
Signed-off-by: Dan Moulding <dmoulding@me.com>
Tested-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210810195906.22220-2-dmoulding@me.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Pull powerpc fixes from Michael Ellerman:
- Fix crashes coming out of nap on 32-bit Book3s (eg. powerbooks).
- Fix critical and debug interrupts on BookE, seen as crashes when
using ptrace.
- Fix an oops when running an SMP kernel on a UP system.
- Update pseries LPAR security flavor after partition migration.
- Fix an oops when using kprobes on BookE.
- Fix oops on 32-bit pmac by not calling do_IRQ() from
timer_interrupt().
- Fix softlockups on CPU hotplug into a CPU-less node with xive (P9).
Thanks to Cédric Le Goater, Christophe Leroy, Finn Thain, Geetika
Moolchandani, Laurent Dufour, Laurent Vivier, Nicholas Piggin, Pu Lehui,
Radu Rendec, Srikar Dronamraju, and Stan Johnson.
* tag 'powerpc-5.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/xive: Do not skip CPU-less nodes when creating the IPIs
powerpc/interrupt: Do not call single_step_exception() from other exceptions
powerpc/interrupt: Fix OOPS by not calling do_IRQ() from timer_interrupt()
powerpc/kprobes: Fix kprobe Oops happens in booke
powerpc/pseries: Fix update of LPAR security flavor after LPM
powerpc/smp: Fix OOPS in topology_init()
powerpc/32: Fix critical and debug interrupts on BOOKE
powerpc/32s: Fix napping restore in data storage interrupt (DSI)
Pull irq fixes from Thomas Gleixner:
"A set of fixes for PCI/MSI and x86 interrupt startup:
- Mask all MSI-X entries when enabling MSI-X otherwise stale unmasked
entries stay around e.g. when a crashkernel is booted.
- Enforce masking of a MSI-X table entry when updating it, which
mandatory according to speification
- Ensure that writes to MSI[-X} tables are flushed.
- Prevent invalid bits being set in the MSI mask register
- Properly serialize modifications to the mask cache and the mask
register for multi-MSI.
- Cure the violation of the affinity setting rules on X86 during
interrupt startup which can cause lost and stale interrupts. Move
the initial affinity setting ahead of actualy enabling the
interrupt.
- Ensure that MSI interrupts are completely torn down before freeing
them in the error handling case.
- Prevent an array out of bounds access in the irq timings code"
* tag 'irq-urgent-2021-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
driver core: Add missing kernel doc for device::msi_lock
genirq/msi: Ensure deactivation on teardown
genirq/timings: Prevent potential array overflow in __irq_timings_store()
x86/msi: Force affinity setup before startup
x86/ioapic: Force affinity setup before startup
genirq: Provide IRQCHIP_AFFINITY_PRE_STARTUP
PCI/MSI: Protect msi_desc::masked for multi-MSI
PCI/MSI: Use msi_mask_irq() in pci_msi_shutdown()
PCI/MSI: Correct misleading comments
PCI/MSI: Do not set invalid bits in MSI mask
PCI/MSI: Enforce MSI[X] entry updates to be visible
PCI/MSI: Enforce that MSI-X table entry is masked for update
PCI/MSI: Mask all unused MSI-X entries
PCI/MSI: Enable and mask MSI-X early
Pull locking fix from Borislav Petkov:
- Fix a CONFIG symbol's spelling
* tag 'locking_urgent_for_v5.14_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rtmutex: Use the correct rtmutex debugging config option
Pull EFI fixes from Borislav Petkov:
"A batch of fixes for the arm64 stub image loader:
- fix a logic bug that can make the random page allocator fail
spuriously
- force reallocation of the Image when it overlaps with firmware
reserved memory regions
- fix an oversight that defeated on optimization introduced earlier
where images loaded at a suitable offset are never moved if booting
without randomization
- complain about images that were not loaded at the right offset by
the firmware image loader"
* tag 'efi_urgent_for_v5.14_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/libstub: arm64: Double check image alignment at entry
efi/libstub: arm64: Warn when efi_random_alloc() fails
efi/libstub: arm64: Relax 2M alignment again for relocatable kernels
efi/libstub: arm64: Force Image reallocation if BSS was not reserved
arm64: efi: kaslr: Fix occasional random alloc (and boot) failure
Pull x86 fixes from Borislav Petkov:
"Two fixes:
- An objdump checker fix to ignore parenthesized strings in the
objdump version
- Fix resctrl default monitoring groups reporting when new subgroups
get created"
* tag 'x86_urgent_for_v5.14_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Fix default monitoring groups reporting
x86/tools: Fix objdump version check again
Pull KVM fixes from Paolo Bonzini:
"ARM:
- Plug race between enabling MTE and creating vcpus
- Fix off-by-one bug when checking whether an address range is RAM
x86:
- Fixes for the new MMU, especially a memory leak on hosts with <39
physical address bits
- Remove bogus EFER.NX checks on 32-bit non-PAE hosts
- WAITPKG fix"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/mmu: Protect marking SPs unsync when using TDP MMU with spinlock
KVM: x86/mmu: Don't step down in the TDP iterator when zapping all SPTEs
KVM: x86/mmu: Don't leak non-leaf SPTEs when zapping all SPTEs
KVM: nVMX: Use vmx_need_pf_intercept() when deciding if L0 wants a #PF
kvm: vmx: Sync all matching EPTPs when injecting nested EPT fault
KVM: x86: remove dead initialization
KVM: x86: Allow guest to set EFER.NX=1 on non-PAE 32-bit kernels
KVM: VMX: Use current VMCS to query WAITPKG support for MSR emulation
KVM: arm64: Fix race when enabling KVM_ARM_CAP_MTE
KVM: arm64: Fix off-by-one in range_is_memory
Pull SCSI fixes from James Bottomley:
"Three minor fixes, all in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mpt3sas: Fix incorrectly assigned error return and check
scsi: storvsc: Log TEST_UNIT_READY errors as warnings
scsi: lpfc: Move initialization of phba->poll_list earlier to avoid crash
Pull libnvdimm fixes from Dan Williams:
"A couple of fixes for long standing bugs, a warning fixup, and some
miscellaneous dax cleanups.
The bugs were recently found due to new platforms looking to use the
ACPI NFIT "virtual" device definition, and new error injection
capabilities to trigger error responses to label area requests. Ira's
cleanups have been long pending, I neglected to send them earlier, and
see no harm in including them now. This has all appeared in -next with
no reported issues.
Summary:
- Fix support for NFIT "virtual" ranges (BIOS-defined memory disks)
- Fix recovery from failed label storage areas on NVDIMM devices
- Miscellaneous cleanups from Ira's investigation of
dax_direct_access paths preparing for stray-write protection"
* tag 'libnvdimm-fixes-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
tools/testing/nvdimm: Fix missing 'fallthrough' warning
libnvdimm/region: Fix label activation vs errors
ACPI: NFIT: Fix support for virtual SPA ranges
dax: Ensure errno is returned from dax_direct_access
fs/dax: Clarify nr_pages to dax_direct_access()
fs/fuse: Remove unneeded kaddr parameter
Pull USB fix from Greg KH:
"A single revert of a commit that caused problems in 5.14-rc5 for
5.14-rc6. It has been in linux-next almost all week, and has resolved
the issues that were reported on lots of different systems that were
not the platform that the change was originally tested on (gotta love
SoC cores used in multiple devices from multiple vendors...)"
* tag 'usb-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
Revert "usb: dwc3: gadget: Use list_replace_init() before traversing lists"
Pull IIO driver fixes from Greg KH:
"Here are some small IIO driver fixes for reported problems for
5.14-rc6 (no staging driver fixes at the moment).
All of them resolve reported issues and have been in linux-next all
week with no reported problems. Full details are in the shortlog"
* tag 'staging-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: adc: Fix incorrect exit of for-loop
iio: humidity: hdc100x: Add margin to the conversion time
dt-bindings: iio: st: Remove wrong items length check
iio: accel: fxls8962af: fix i2c dependency
iio: adis: set GPIO reset pin direction
iio: adc: ti-ads7950: Ensure CS is deasserted after reading channels
iio: accel: fxls8962af: fix potential use of uninitialized symbol
Pull i2c fixes from Wolfram Sang:
"One driver bugfix, a documentation bugfix, and an "uninitialized data"
leak fix for the core"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Documentation: i2c: add i2c-sysfs into index
i2c: dev: zero out array used for i2c reads from userspace
i2c: iproc: fix race between client unreg and tasklet
Pull xen fixes from Juergen Gross:
"A small cleanup patch and a fix of a rare race in the Xen evtchn
driver"
* tag 'for-linus-5.14-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events: Fix race in set_evtchn_to_irq
xen/events: remove redundant initialization of variable irq
Pull RISC-V fixes from Palmer Dabbelt:
- avoid passing -mno-relax to compilers that don't support it
- a comment fix
* tag 'riscv-for-linus-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix comment regarding kernel mapping overlapping with IS_ERR_VALUE
riscv: kexec: do not add '-mno-relax' flag if compiler doesn't support it
Pull configfs fix from Christoph Hellwig:
- fix to revert to the historic write behavior (Bart Van Assche)
* tag 'configfs-5.14' of git://git.infradead.org/users/hch/configfs:
configfs: restore the kernel v5.13 text attribute write behavior
Merge misc fixes from Andrew Morton:
"7 patches.
Subsystems affected by this patch series: mm (kasan, mm/slub,
mm/madvise, and memcg), and lib"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
lib: use PFN_PHYS() in devmem_is_allowed()
mm/memcg: fix incorrect flushing of lruvec data in obj_stock
mm/madvise: report SIGBUS as -EFAULT for MADV_POPULATE_(READ|WRITE)
mm: slub: fix slub_debug disabling for list of slabs
slub: fix kmalloc_pagealloc_invalid_free unit test
kasan, slub: reset tag when printing address
kasan, kmemleak: reset tags when scanning block
Pull cifs fixes from Steve French:
"Four CIFS/SMB3 Fixes, all for stable, two relating to deferred close,
and one for the 'modefromsid' mount option (when 'idsfromsid' not
specified)"
* tag '5.14-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Call close synchronously during unlink/rename/lease break.
cifs: Handle race conditions during rename
cifs: use the correct max-length for dentry_path_raw()
cifs: create sd context must be a multiple of 8
Pull Kselftest fix from Shuah Khan:
"A single patch to sgx test to fix Q1 and Q2 calculation"
* tag 'linux-kselftest-fixes-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/sgx: Fix Q1 and Q2 calculation in sigstruct.c
Vijayanand Jitta reports:
Consider the scenario where CONFIG_SLUB_DEBUG_ON is set and we would
want to disable slub_debug for few slabs. Using boot parameter with
slub_debug=-,slab_name syntax doesn't work as expected i.e; only
disabling debugging for the specified list of slabs. Instead it
disables debugging for all slabs, which is wrong.
This patch fixes it by delaying the moment when the global slub_debug
flags variable is updated. In case a "slub_debug=-,slab_name" has been
passed, the global flags remain as initialized (depending on
CONFIG_SLUB_DEBUG_ON enabled or disabled) and are not simply reset to 0.
Link: https://lkml.kernel.org/r/8a3d992a-473a-467b-28a0-4ad2ff60ab82@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Vijayanand Jitta <vjitta@codeaurora.org>
Reviewed-by: Vijayanand Jitta <vjitta@codeaurora.org>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The unit test kmalloc_pagealloc_invalid_free makes sure that for the
higher order slub allocation which goes to page allocator, the free is
called with the correct address i.e. the virtual address of the head
page.
Commit f227f0faf6 ("slub: fix unreclaimable slab stat for bulk free")
unified the free code paths for page allocator based slub allocations
but instead of using the address passed by the caller, it extracted the
address from the page. Thus making the unit test
kmalloc_pagealloc_invalid_free moot. So, fix this by using the address
passed by the caller.
Should we fix this? I think yes because dev expect kasan to catch these
type of programming bugs.
Link: https://lkml.kernel.org/r/20210802180819.1110165-1-shakeelb@google.com
Fixes: f227f0faf6 ("slub: fix unreclaimable slab stat for bulk free")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "kasan, slub: reset tag when printing address", v3.
With hardware tag-based kasan enabled, we reset the tag when we access
metadata to avoid from false alarm.
This patch (of 2):
Kmemleak needs to scan kernel memory to check memory leak. With hardware
tag-based kasan enabled, when it scans on the invalid slab and
dereference, the issue will occur as below.
Hardware tag-based KASAN doesn't use compiler instrumentation, we can not
use kasan_disable_current() to ignore tag check.
Based on the below report, there are 11 0xf7 granules, which amounts to
176 bytes, and the object is allocated from the kmalloc-256 cache. So
when kmemleak accesses the last 256-176 bytes, it causes faults, as those
are marked with KASAN_KMALLOC_REDZONE == KASAN_TAG_INVALID == 0xfe.
Thus, we reset tags before accessing metadata to avoid from false positives.
BUG: KASAN: out-of-bounds in scan_block+0x58/0x170
Read at addr f7ff0000c0074eb0 by task kmemleak/138
Pointer tag: [f7], memory tag: [fe]
CPU: 7 PID: 138 Comm: kmemleak Not tainted 5.14.0-rc2-00001-g8cae8cd89f05-dirty #134
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x0/0x1b0
show_stack+0x1c/0x30
dump_stack_lvl+0x68/0x84
print_address_description+0x7c/0x2b4
kasan_report+0x138/0x38c
__do_kernel_fault+0x190/0x1c4
do_tag_check_fault+0x78/0x90
do_mem_abort+0x44/0xb4
el1_abort+0x40/0x60
el1h_64_sync_handler+0xb4/0xd0
el1h_64_sync+0x78/0x7c
scan_block+0x58/0x170
scan_gray_list+0xdc/0x1a0
kmemleak_scan+0x2ac/0x560
kmemleak_scan_thread+0xb0/0xe0
kthread+0x154/0x160
ret_from_fork+0x10/0x18
Allocated by task 0:
kasan_save_stack+0x2c/0x60
__kasan_kmalloc+0xec/0x104
__kmalloc+0x224/0x3c4
__register_sysctl_paths+0x200/0x290
register_sysctl_table+0x2c/0x40
sysctl_init+0x20/0x34
proc_sys_init+0x3c/0x48
proc_root_init+0x80/0x9c
start_kernel+0x648/0x6a4
__primary_switched+0xc0/0xc8
Freed by task 0:
kasan_save_stack+0x2c/0x60
kasan_set_track+0x2c/0x40
kasan_set_free_info+0x44/0x54
____kasan_slab_free.constprop.0+0x150/0x1b0
__kasan_slab_free+0x14/0x20
slab_free_freelist_hook+0xa4/0x1fc
kfree+0x1e8/0x30c
put_fs_context+0x124/0x220
vfs_kern_mount.part.0+0x60/0xd4
kern_mount+0x24/0x4c
bdev_cache_init+0x70/0x9c
vfs_caches_init+0xdc/0xf4
start_kernel+0x638/0x6a4
__primary_switched+0xc0/0xc8
The buggy address belongs to the object at ffff0000c0074e00
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 176 bytes inside of
256-byte region [ffff0000c0074e00, ffff0000c0074f00)
The buggy address belongs to the page:
page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x100074
head:(____ptrval____) order:2 compound_mapcount:0 compound_pincount:0
flags: 0xbfffc0000010200(slab|head|node=0|zone=2|lastcpupid=0xffff|kasantag=0x0)
raw: 0bfffc0000010200 0000000000000000 dead000000000122 f5ff0000c0002300
raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff0000c0074c00: f0 f0 f0 f0 f0 f0 f0 f0 f0 fe fe fe fe fe fe fe
ffff0000c0074d00: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe
>ffff0000c0074e00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 fe fe fe fe fe
^
ffff0000c0074f00: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe
ffff0000c0075000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Disabling lock debugging due to kernel taint
kmemleak: 181 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
Link: https://lkml.kernel.org/r/20210804090957.12393-1-Kuan-Ying.Lee@mediatek.com
Link: https://lkml.kernel.org/r/20210804090957.12393-2-Kuan-Ying.Lee@mediatek.com
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Marco Elver <elver@google.com>
Cc: Nicholas Tang <nicholas.tang@mediatek.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull block fixes from Jens Axboe:
"A few fixes for block that should go into 5.14:
- Revert the mq-deadline cgroup addition. More work is needed on this
front, let's revert it for now and get it right before having it in
a released kernel (Tejun)
- blk-iocost lockdep fix (Ming)
- nbd double completion fix (Xie)
- Fix for non-idling when clearing the shared tag flag (Yu)"
* tag 'block-5.14-2021-08-13' of git://git.kernel.dk/linux-block:
nbd: Aovid double completion of a request
blk-mq: clear active_queues before clearing BLK_MQ_F_TAG_QUEUE_SHARED
Revert "block/mq-deadline: Add cgroup support"
blk-iocost: fix lockdep warning on blkcg->lock
Pull io_uring fixes from Jens Axboe:
"A bit bigger than the previous weeks, but mostly just a few stable
bound fixes. In detail:
- Followup fixes to patches from last week for io-wq, turns out they
weren't complete (Hao)
- Two lockdep reported fixes out of the RT camp (me)
- Sync the io_uring-cp example with liburing, as a few bug fixes
never made it to the kernel carried version (me)
- SQPOLL related TIF_NOTIFY_SIGNAL fix (Nadav)
- Use WRITE_ONCE() when writing sq flags (Nadav)
- io_rsrc_put_work() deadlock fix (Pavel)"
* tag 'io_uring-5.14-2021-08-13' of git://git.kernel.dk/linux-block:
tools/io_uring/io_uring-cp: sync with liburing example
io_uring: fix ctx-exit io_rsrc_put_work() deadlock
io_uring: drop ctx->uring_lock before flushing work item
io-wq: fix IO_WORKER_F_FIXED issue in create_io_worker()
io-wq: fix bug of creating io-wokers unconditionally
io_uring: rsrc ref lock needs to be IRQ safe
io_uring: Use WRITE_ONCE() when writing to sq_flags
io_uring: clear TIF_NOTIFY_SIGNAL when running task work
