Implement get_pauseparam() and set_pauseparam() ethtool operations for
Sparx5 ports. This allows users to query and configure IEEE 802.3x
pause frame settings via:
ethtool -a ethX
ethtool -A ethX rx on|off tx on|off autoneg on|off
The driver delegates pause parameter handling to phylink through
phylink_ethtool_get_pauseparam() and phylink_ethtool_set_pauseparam().
The underlying configuration of pause frame generation and reception is
already implemented in the driver; this patch only wires it up to the
standard ethtool interface, making the feature accessible to userspace.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250917-802-3x-pause-v1-1-3d1565a68a96@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for fast link failure for lan8842, when this is enabled the
PHY will detect link down immediately (~1ms). The disadvantage of this
is that also small instability might be reported as link down.
Therefore add this feature as a tunable configuration and the user will
know when to enable or not. By default it is not enabled.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250917104630.3931969-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a PHY is halted (e.g. `ip link set dev lan2 down`), several
fields in struct phy_device may still reflect the last active
connection. This leads to ethtool showing stale values even though
the link is down.
Reset selected fields in _phy_state_machine() when transitioning
to PHY_HALTED and the link was previously up:
- speed/duplex -> UNKNOWN, but only in autoneg mode (in forced mode
these fields carry configuration, not status)
- master_slave_state -> UNKNOWN if previously supported
- mdix -> INVALID (state only, same meaning as "unknown")
- lp_advertising -> always cleared
The cleanup is skipped if the PHY is in PHY_ERROR state, so the
last values remain available for diagnostics.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250917094751.2101285-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.17-rc7).
No conflicts.
Adjacent changes:
drivers/net/ethernet/mellanox/mlx5/core/en/fs.h
9536fbe10c ("net/mlx5e: Add PSP steering in local NIC RX")
7601a0a462 ("net/mlx5e: Add a miss level for ipsec crypto offload")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless. No known regressions at this point.
Current release - fix to a fix:
- eth: Revert "net/mlx5e: Update and set Xon/Xoff upon port speed set"
- wifi: iwlwifi: pcie: fix byte count table for 7000/8000 devices
- net: clear sk->sk_ino in sk_set_socket(sk, NULL), fix CRIU
Previous releases - regressions:
- bonding: set random address only when slaves already exist
- rxrpc: fix untrusted unsigned subtract
- eth:
- ice: fix Rx page leak on multi-buffer frames
- mlx5: don't return mlx5_link_info table when speed is unknown
Previous releases - always broken:
- tls: make sure to abort the stream if headers are bogus
- tcp: fix null-deref when using TCP-AO with TCP_REPAIR
- dpll: fix skipping last entry in clock quality level reporting
- eth: qed: don't collect too many protection override GRC elements,
fix memory corruption"
* tag 'net-6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits)
octeontx2-pf: Fix use-after-free bugs in otx2_sync_tstamp()
cnic: Fix use-after-free bugs in cnic_delete_task
devlink rate: Remove unnecessary 'static' from a couple places
MAINTAINERS: update sundance entry
net: liquidio: fix overflow in octeon_init_instr_queue()
net: clear sk->sk_ino in sk_set_socket(sk, NULL)
Revert "net/mlx5e: Update and set Xon/Xoff upon port speed set"
selftests: tls: test skb copy under mem pressure and OOB
tls: make sure to abort the stream if headers are bogus
selftest: packetdrill: Add tcp_fastopen_server_reset-after-disconnect.pkt.
tcp: Clear tcp_sk(sk)->fastopen_rsk in tcp_disconnect().
octeon_ep: fix VF MAC address lifecycle handling
selftests: bonding: add vlan over bond testing
bonding: don't set oif to bond dev when getting NS target destination
net: rfkill: gpio: Fix crash due to dereferencering uninitialized pointer
net/mlx5e: Add a miss level for ipsec crypto offload
net/mlx5e: Harden uplink netdev access against device unbind
MAINTAINERS: make the DPLL entry cover drivers
doc/netlink: Fix typos in operation attributes
igc: don't fail igc_probe() on LED setup error
...
Pull kvm fixes from Paolo Bonzini:
"These are mostly Oliver's Arm changes: lock ordering fixes for the
vGIC, and reverts for a buggy attempt to avoid RCU stalls on large
VMs.
Arm:
- Invalidate nested MMUs upon freeing the PGD to avoid WARNs when
visiting from an MMU notifier
- Fixes to the TLB match process and TLB invalidation range for
managing the VCNR pseudo-TLB
- Prevent SPE from erroneously profiling guests due to UNKNOWN reset
values in PMSCR_EL1
- Fix save/restore of host MDCR_EL2 to account for eagerly
programming at vcpu_load() on VHE systems
- Correct lock ordering when dealing with VGIC LPIs, avoiding
scenarios where an xarray's spinlock was nested with a *raw*
spinlock
- Permit stage-2 read permission aborts which are possible in the
case of NV depending on the guest hypervisor's stage-2 translation
- Call raw_spin_unlock() instead of the internal spinlock API
- Fix parameter ordering when assigning VBAR_EL1
- Reverted a couple of fixes for RCU stalls when destroying a stage-2
page table.
There appears to be some nasty refcounting / UAF issues lurking in
those patches and the band-aid we tried to apply didn't hold.
s390:
- mm fixes, including userfaultfd bug fix
x86:
- Sync the vTPR from the local APIC to the VMCB even when AVIC is
active.
This fixes a bug where host updates to the vTPR, e.g. via
KVM_SET_LAPIC or emulation of a guest access, are lost and result
in interrupt delivery issues in the guest"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Sync TPR from LAPIC into VMCB::V_TPR even if AVIC is active
Revert "KVM: arm64: Split kvm_pgtable_stage2_destroy()"
Revert "KVM: arm64: Reschedule as needed when destroying the stage-2 page-tables"
KVM: arm64: vgic: fix incorrect spinlock API usage
KVM: arm64: Remove stage 2 read fault check
KVM: arm64: Fix parameter ordering for VBAR_EL1 assignment
KVM: arm64: nv: Fix incorrect VNCR invalidation range calculation
KVM: arm64: vgic-v3: Indicate vgic_put_irq() may take LPI xarray lock
KVM: arm64: vgic-v3: Don't require IRQs be disabled for LPI xarray lock
KVM: arm64: vgic-v3: Erase LPIs from xarray outside of raw spinlocks
KVM: arm64: Spin off release helper from vgic_put_irq()
KVM: arm64: vgic-v3: Use bare refcount for VGIC LPIs
KVM: arm64: vgic: Drop stale comment on IRQ active state
KVM: arm64: VHE: Save and restore host MDCR_EL2 value correctly
KVM: arm64: Initialize PMSCR_EL1 when in VHE
KVM: arm64: nv: fix VNCR TLB ASID match logic for non-Global entries
KVM: s390: Fix FOLL_*/FAULT_FLAG_* confusion
KVM: s390: Fix incorrect usage of mmu_notifier_register()
KVM: s390: Fix access to unavailable adapter indicator pages during postcopy
KVM: arm64: Mark freed S2 MMUs as invalid
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes and new HW support:
- amd/pmc: Add MECHREVO Yilong15Pro to spurious_8042 list
- amd/pmf: Support new ACPI ID AMDI0108
- asus-wmi: Re-add extra keys to ignore_key_wlan quirk
- oxpec: Add support for AOKZOE A1X and OneXPlayer X1Pro EVA-02"
* tag 'platform-drivers-x86-v6.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: asus-wmi: Re-add extra keys to ignore_key_wlan quirk
platform/x86/amd/pmf: Support new ACPI ID AMDI0108
platform/x86: oxpec: Add support for AOKZOE A1X
platform/x86: oxpec: Add support for OneXPlayer X1Pro EVA-02
platform/x86/amd/pmc: Add MECHREVO Yilong15Pro to spurious_8042 list
Pull UML fixes from Johannes Berg:
"A few fixes for UML, which I'd meant to send earlier but then forgot.
All of them are pretty long-standing issues that are either not really
happening (the UAF), in rarely used code (the FD buffer issue), or an
issue only for some host configurations (the executable stack):
- mark stack not executable to work on more modern systems with
selinux
- fix use-after-free in a virtio error path
- fix stack buffer overflow in external unix socket FD receive
function"
* tag 'uml-for-6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: Fix FD copy size in os_rcv_fd_msg()
um: virtio_uml: Fix use-after-free after put_device in probe
um: Don't mark stack executable
The original code relies on cancel_delayed_work() in otx2_ptp_destroy(),
which does not ensure that the delayed work item synctstamp_work has fully
completed if it was already running. This leads to use-after-free scenarios
where otx2_ptp is deallocated by otx2_ptp_destroy(), while synctstamp_work
remains active and attempts to dereference otx2_ptp in otx2_sync_tstamp().
Furthermore, the synctstamp_work is cyclic, the likelihood of triggering
the bug is nonnegligible.
A typical race condition is illustrated below:
CPU 0 (cleanup) | CPU 1 (delayed work callback)
otx2_remove() |
otx2_ptp_destroy() | otx2_sync_tstamp()
cancel_delayed_work() |
kfree(ptp) |
| ptp = container_of(...); //UAF
| ptp-> //UAF
This is confirmed by a KASAN report:
BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0
Write of size 8 at addr ffff88800aa09a18 by task bash/136
...
Call Trace:
<IRQ>
dump_stack_lvl+0x55/0x70
print_report+0xcf/0x610
? __run_timer_base.part.0+0x7d7/0x8c0
kasan_report+0xb8/0xf0
? __run_timer_base.part.0+0x7d7/0x8c0
__run_timer_base.part.0+0x7d7/0x8c0
? __pfx___run_timer_base.part.0+0x10/0x10
? __pfx_read_tsc+0x10/0x10
? ktime_get+0x60/0x140
? lapic_next_event+0x11/0x20
? clockevents_program_event+0x1d4/0x2a0
run_timer_softirq+0xd1/0x190
handle_softirqs+0x16a/0x550
irq_exit_rcu+0xaf/0xe0
sysvec_apic_timer_interrupt+0x70/0x80
</IRQ>
...
Allocated by task 1:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x7f/0x90
otx2_ptp_init+0xb1/0x860
otx2_probe+0x4eb/0xc30
local_pci_probe+0xdc/0x190
pci_device_probe+0x2fe/0x470
really_probe+0x1ca/0x5c0
__driver_probe_device+0x248/0x310
driver_probe_device+0x44/0x120
__driver_attach+0xd2/0x310
bus_for_each_dev+0xed/0x170
bus_add_driver+0x208/0x500
driver_register+0x132/0x460
do_one_initcall+0x89/0x300
kernel_init_freeable+0x40d/0x720
kernel_init+0x1a/0x150
ret_from_fork+0x10c/0x1a0
ret_from_fork_asm+0x1a/0x30
Freed by task 136:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3a/0x60
__kasan_slab_free+0x3f/0x50
kfree+0x137/0x370
otx2_ptp_destroy+0x38/0x80
otx2_remove+0x10d/0x4c0
pci_device_remove+0xa6/0x1d0
device_release_driver_internal+0xf8/0x210
pci_stop_bus_device+0x105/0x150
pci_stop_and_remove_bus_device_locked+0x15/0x30
remove_store+0xcc/0xe0
kernfs_fop_write_iter+0x2c3/0x440
vfs_write+0x871/0xd70
ksys_write+0xee/0x1c0
do_syscall_64+0xac/0x280
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the delayed work item is properly canceled before the otx2_ptp is
deallocated.
This bug was initially identified through static analysis. To reproduce
and test it, I simulated the OcteonTX2 PCI device in QEMU and introduced
artificial delays within the otx2_sync_tstamp() function to increase the
likelihood of triggering the bug.
Fixes: 2958d17a89 ("octeontx2-pf: Add support for ptp 1-step mode on CN10K silicon")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The original code uses cancel_delayed_work() in cnic_cm_stop_bnx2x_hw(),
which does not guarantee that the delayed work item 'delete_task' has
fully completed if it was already running. Additionally, the delayed work
item is cyclic, the flush_workqueue() in cnic_cm_stop_bnx2x_hw() only
blocks and waits for work items that were already queued to the
workqueue prior to its invocation. Any work items submitted after
flush_workqueue() is called are not included in the set of tasks that the
flush operation awaits. This means that after the cyclic work items have
finished executing, a delayed work item may still exist in the workqueue.
This leads to use-after-free scenarios where the cnic_dev is deallocated
by cnic_free_dev(), while delete_task remains active and attempt to
dereference cnic_dev in cnic_delete_task().
A typical race condition is illustrated below:
CPU 0 (cleanup) | CPU 1 (delayed work callback)
cnic_netdev_event() |
cnic_stop_hw() | cnic_delete_task()
cnic_cm_stop_bnx2x_hw() | ...
cancel_delayed_work() | /* the queue_delayed_work()
flush_workqueue() | executes after flush_workqueue()*/
| queue_delayed_work()
cnic_free_dev(dev)//free | cnic_delete_task() //new instance
| dev = cp->dev; //use
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the cyclic delayed work item is properly canceled and that any
ongoing execution of the work item completes before the cnic_dev is
deallocated. Furthermore, since cancel_delayed_work_sync() uses
__flush_work(work, true) to synchronously wait for any currently
executing instance of the work item to finish, the flush_workqueue()
becomes redundant and should be removed.
This bug was identified through static analysis. To reproduce the issue
and validate the fix, I simulated the cnic PCI device in QEMU and
introduced intentional delays — such as inserting calls to ssleep()
within the cnic_delete_task() function — to increase the likelihood
of triggering the bug.
Fixes: fdf24086f4 ("cnic: Defer iscsi connection cleanup")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devlink_rate_node_get_by_name() and devlink_rate_nodes_destroy() have a
couple of unnecessary static variables for iterating over devlink rates.
This could lead to races/corruption/unhappiness if two concurrent
operations execute the same function.
Remove 'static' from both. It's amazing this was missed for 4+ years.
While at it, I confirmed there are no more examples of this mistake in
net/ with 1, 2 or 3 levels of indentation.
Fixes: a8ecb93ef0 ("devlink: Introduce rate nodes")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The expression `(conf->instr_type == 64) << iq_no` can overflow because
`iq_no` may be as high as 64 (`CN23XX_MAX_RINGS_PER_PF`). Casting the
operand to `u64` ensures correct 64-bit arithmetic.
Fixes: f21fb3ed36 ("Add support of Cavium Liquidio ethernet adapters")
Signed-off-by: Alexey Nepomnyashih <sdl@nppct.ru>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace the existing virtnet_get_rxnfc callback with a dedicated
virtnet_get_rxrings implementation to provide the number of RX rings
directly via the new ethtool_ops get_rx_ring_count pointer.
This simplifies the RX ring count retrieval and aligns virtio_net with
the new ethtool API for querying RX ring parameters.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250917-gxrings-v4-8-dae520e2e1cb@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor rss_set_prep_indir() to utilize the new
ethtool_get_rx_ring_count() helper for determining the number of RX
rings, replacing the direct use of get_rxnfc with ETHTOOL_GRXRINGS.
This ensures compatibility with both legacy and new ethtool_ops
interfaces by transparently multiplexing between them.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250917-gxrings-v4-7-dae520e2e1cb@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Modify ethtool_set_rxfh() to use the new ethtool_get_rx_ring_count()
helper function for retrieving the number of RX rings instead of
directly calling get_rxnfc with ETHTOOL_GRXRINGS.
This way, we can leverage the new helper if it is available in ethtool_ops.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250917-gxrings-v4-6-dae520e2e1cb@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Modify ethtool_set_rxfh() to use the new ethtool_get_rx_ring_count()
helper function for retrieving the number of RX rings instead of
directly calling get_rxnfc with ETHTOOL_GRXRINGS.
This way, we can leverage the new helper if it is available in ethtool_ops.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250917-gxrings-v4-5-dae520e2e1cb@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new optional get_rx_ring_count callback in ethtool_ops to allow
drivers to provide the number of RX rings directly without going through
the full get_rxnfc flow classification interface.
Create ethtool_get_rx_ring_count() to use .get_rx_ring_count if
available, falling back to get_rxnfc() otherwise. It needs to be
non-static, given it will be called by other ethtool functions laters,
as those calling get_rxfh().
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250917-gxrings-v4-4-dae520e2e1cb@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds handling for the ETHTOOL_GRXRINGS ioctl command in the
ethtool ioctl dispatcher. It introduces a new helper function
ethtool_get_rxrings() that calls the driver's get_rxnfc() callback with
appropriate parameters to retrieve the number of RX rings supported
by the device.
By explicitly handling ETHTOOL_GRXRINGS, userspace queries through
ethtool can now obtain RX ring information in a structured manner.
In this patch, ethtool_get_rxrings() is a simply copy of
ethtool_get_rxnfc().
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250917-gxrings-v4-2-dae520e2e1cb@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Modify ethtool_copy_validate_indir() and callers to validate indirection
table entries against the number of RX rings as an integer instead of
accessing rx_rings->data.
This will be useful in the future, given that struct ethtool_rxnfc might
not exist for native GRXRINGS call.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250917-gxrings-v4-1-dae520e2e1cb@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michael Chan says:
====================
bnxt_en: Updates for net-next
This series includes some code clean-ups and optimizations. New features
include 2 new backing store memory types to collect FW logs for core
dumps, dynamic SRIOV resource allocations for RoCE, and ethtool tunable
for PFC watchdog.
v2: Drop patch #4. The patch makes the code different from the original
bnxt_hwrm_func_backing_store_cfg_v2() that allows instance_bmap to have
bits that are not contiguous. It is safer to keep the original code.
v1: https://lore.kernel.org/netdev/20250915030505.1803478-1-michael.chan@broadcom.com/
====================
Link: https://patch.msgid.link/20250917040839.1924698-1-michael.chan@broadcom.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Improve the logic that determines the last_type in this function.
The different context memory types are configured in a loop. The
last_type signals the last context memory type to be configured
which requires the ALL_DONE flag to be set for the FW.
The existing logic makes some assumptions that TIM is the last_type
when RDMA is enabled or FTQM is the last_type when only L2 is
enabled. Improve it to just search for the last_type so that we
don't need to make these assumptions that won't necessary be true
for future devices.
Reviewed-by: Shruti Parab <shruti.parab@broadcom.com>
Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250917040839.1924698-5-michael.chan@broadcom.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Normally we wait for the socket to buffer up the whole record
before we service it. If the socket has a tiny buffer, however,
we read out the data sooner, to prevent connection stalls.
Make sure that we abort the connection when we find out late
that the record is actually invalid. Retrying the parsing is
fine in itself but since we copy some more data each time
before we parse we can overflow the allocated skb space.
Constructing a scenario in which we're under pressure without
enough data in the socket to parse the length upfront is quite
hard. syzbot figured out a way to do this by serving us the header
in small OOB sends, and then filling in the recvbuf with a large
normal send.
Make sure that tls_rx_msg_size() aborts strp, if we reach
an invalid record there's really no way to recover.
Reported-by: Lee Jones <lee@kernel.org>
Fixes: 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250917002814.1743558-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce decrypt FT, the RX error FT, and the default rules.
The PSP (PSP) RX decrypt flow table is pointed by the TTC
(Traffic Type Classifier) UDP steering rules.
The decrypt flow table has two flow groups. The first flow group
keeps the decrypt steering rule programmed always when PSP packet is
recognized using the dedicated udp destination port number 1000, if
packet is decrypted then a PSP marker is set in metadata_regB[30].
The second flow group has a default rule to forward all non-offloaded
PSP packet to the TTC UDP default RSS TIR.
The RX error flow table is the destination of the decrypt steering rules in
the PSP RX decrypt flow table. It has two fixed rule one with single copy
action that copies psp_syndrome to metadata_regB[23:29]. The PSP marker
and syndrome is used to filter out non-psp packet and to return the PSP
crypto offload status in Rx flow. The marker is used to identify such
packet in driver so the driver could set SKB PSP metadata. The destination
of RX error flow table is the TTC UDP default RSS TIR. The second rule will
drop packets that failed to be decrypted (like in case illegal SPI or
expired SPI is used).
Signed-off-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250917000954.859376-16-daniel.zahka@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
