If the agfl or the indexing in the AGF has been corrupted, getting a
block form the AGFL could return an invalid block number. If this
happens, bad things happen. Check the agbno we pull off the AGFL
and return -EFSCORRUPTED if we find somethign bad.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When a v4 filesystem has fl_last - fl_first != fl_count, we do not
not detect the corruption and allow the AGF to be used as it if was
fully valid. On V5 filesystems, we reset the AGFL to empty in these
cases and avoid the corruption at a small cost of leaked blocks.
If we don't catch the corruption on V4 filesystems, bad things
happen later when an allocation attempts to trim the free list
and either double-frees stale entries in the AGFl or tries to free
NULLAGBNO entries.
Either way, this is bad. Prevent this from happening by using the
AGFL_NEED_RESET logic for v4 filesysetms, too.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_bmap_longest_free_extent() can return an error when accessing
the AGF fails. In this case, the behaviour of
xfs_filestream_pick_ag() is conditional on the error. We may
continue the loop, or break out of it. The error handling after the
loop cleans up the perag reference held when the break occurs. If we
continue, the next loop iteration handles cleaning up the perag
reference.
EIther way, we don't need to release the active perag reference when
xfs_bmap_longest_free_extent() fails. Doing so means we do a double
decrement on the active reference count, and this causes tha active
reference count to fall to zero. At this point, new active
references will fail.
This leads to unmount hanging because it tries to grab active
references to that perag, only for it to fail. This happens inside a
loop that retries until a inode tree radix tree tag is cleared,
which cannot happen because we can't get an active reference to the
perag.
The unmount livelocks in this path:
xfs_reclaim_inodes+0x80/0xc0
xfs_unmount_flush_inodes+0x5b/0x70
xfs_unmountfs+0x5b/0x1a0
xfs_fs_put_super+0x49/0x110
generic_shutdown_super+0x7c/0x1a0
kill_block_super+0x27/0x50
deactivate_locked_super+0x30/0x90
deactivate_super+0x3c/0x50
cleanup_mnt+0xc2/0x160
__cleanup_mnt+0x12/0x20
task_work_run+0x5e/0xa0
exit_to_user_mode_prepare+0x1bc/0x1c0
syscall_exit_to_user_mode+0x16/0x40
do_syscall_64+0x40/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Fixes: eb70aa2d8e ("xfs: use for_each_perag_wrap in xfs_filestream_pick_ag")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Commit 6bc6c99a944c was a well-intentioned effort to initiate
consolidation of adjacent bmbt mapping records by setting the PREEN
flag. Consolidation can only happen if the length of the combined
record doesn't overflow the 21-bit blockcount field of the bmbt
recordset. Unfortunately, the length test is inverted, leading to it
triggering on data forks like these:
EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL
0: [0..16777207]: 76110848..92888055 0 (76110848..92888055) 16777208
1: [16777208..20639743]: 92888056..96750591 0 (92888056..96750591) 3862536
Note that record 0 has a length of 16777208 512b blocks. This
corresponds to 2097151 4k fsblocks, which is the maximum. Hence the two
records cannot be merged.
However, the logic is still wrong even if we change the in-loop
comparison, because the scope of our examination isn't broad enough
inside the loop to detect mappings like this:
0: [0..9]: 76110838..76110847 0 (76110838..76110847) 10
1: [10..16777217]: 76110848..92888055 0 (76110848..92888055) 16777208
2: [16777218..20639753]: 92888056..96750591 0 (92888056..96750591) 3862536
These three records could be merged into two, but one cannot determine
this purely from looking at records 0-1 or 1-2 in isolation.
Hoist the mergability detection outside the loop, and base its decision
making on whether or not a merged mapping could be expressed in fewer
bmbt records. While we're at it, fix the incorrect return type of the
iter function.
Fixes: 336642f792 ("xfs: alert the user about data/attr fork mappings that could be merged")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
With gcc-5:
In file included from ./include/trace/define_trace.h:102:0,
from ./fs/xfs/scrub/trace.h:988,
from fs/xfs/scrub/trace.c:40:
./fs/xfs/./scrub/trace.h: In function ‘trace_raw_output_xchk_fsgate_class’:
./fs/xfs/scrub/scrub.h:111:28: error: initializer element is not constant
#define XREP_ALREADY_FIXED (1 << 31) /* checking our repair work */
^
Shifting the (signed) value 1 into the sign bit is undefined behavior.
Fix this for all definitions in the file by shifting "1U" instead of
"1".
This was exposed by the first user added in commit 466c525d6d
("xfs: minimize overhead of drain wakeups by using jump labels").
Fixes: 160b5a7845 ("xfs: hoist the already_fixed variable to the scrub context")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Lock order in XFS is AGI -> AGF, hence for operations involving
inode unlinked list operations we always lock the AGI first. Inode
unlinked list operations operate on the inode cluster buffer,
so the lock order there is AGI -> inode cluster buffer.
For O_TMPFILE operations, this now means the lock order set down in
xfs_rename and xfs_link is AGI -> inode cluster buffer -> AGF as the
unlinked ops are done before the directory modifications that may
allocate space and lock the AGF.
Unfortunately, we also now lock the inode cluster buffer when
logging an inode so that we can attach the inode to the cluster
buffer and pin it in memory. This creates a lock order of AGF ->
inode cluster buffer in directory operations as we have to log the
inode after we've allocated new space for it.
This creates a lock inversion between the AGF and the inode cluster
buffer. Because the inode cluster buffer is shared across multiple
inodes, the inversion is not specific to individual inodes but can
occur when inodes in the same cluster buffer are accessed in
different orders.
To fix this we need move all the inode log item cluster buffer
interactions to the end of the current transaction. Unfortunately,
xfs_trans_log_inode() calls are littered throughout the transactions
with no thought to ordering against other items or locking. This
makes it difficult to do anything that involves changing the call
sites of xfs_trans_log_inode() to change locking orders.
However, we do now have a mechanism that allows is to postpone dirty
item processing to just before we commit the transaction: the
->iop_precommit method. This will be called after all the
modifications are done and high level objects like AGI and AGF
buffers have been locked and modified, thereby providing a mechanism
that guarantees we don't lock the inode cluster buffer before those
high level objects are locked.
This change is largely moving the guts of xfs_trans_log_inode() to
xfs_inode_item_precommit() and providing an extra flag context in
the inode log item to track the dirty state of the inode in the
current transaction. This also means we do a lot less repeated work
in xfs_trans_log_inode() by only doing it once per transaction when
all the work is done.
Fixes: 298f7bec50 ("xfs: pin inode backing buffer to the inode log item")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
To fix a AGI-AGF-inode cluster buffer deadlock, we need to move
inode cluster buffer operations to the ->iop_precommit() method.
However, this means that deferred operations can require precommits
to be run on the final transaction that the deferred ops pass back
to xfs_trans_commit() context. This will be exposed by attribute
handling, in that the last changes to the inode in the attr set
state machine "disappear" because the precommit operation is not run.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
It was accidentally dropped when refactoring the allocation code,
resulting in the AG iteration always doing blocking AG iteration.
This results in a small performance regression for a specific fsmark
test that runs more user data writer threads than there are AGs.
Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: 2edf06a50f ("xfs: factor xfs_alloc_vextent_this_ag() for _iterate_ags()")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When a buffer is unpinned by xfs_buf_item_unpin(), we need to access
the buffer after we've dropped the buffer log item reference count.
This opens a window where we can have two racing unpins for the
buffer item (e.g. shutdown checkpoint context callback processing
racing with journal IO iclog completion processing) and both attempt
to access the buffer after dropping the BLI reference count. If we
are unlucky, the "BLI freed" context wins the race and frees the
buffer before the "BLI still active" case checks the buffer pin
count.
This results in a use after free that can only be triggered
in active filesystem shutdown situations.
To fix this, we need to ensure that buffer existence extends beyond
the BLI reference count checks and until the unpin processing is
complete. This implies that a buffer pin operation must also take a
buffer reference to ensure that the buffer cannot be freed until the
buffer unpin processing is complete.
Reported-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Pull irq fix from Borislav Petkov:
- Fix open firmware quirks validation so that they don't get applied
wrongly
* tag 'irq_urgent_for_v6.4_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic: Correctly validate OF quirk descriptors
Pull media fixes from Mauro Carvalho Chehab:
"Some driver fixes:
- a regression fix for the verisilicon driver
- uvcvideo: don't expose unsupported video formats to userspace
- camss-video: don't zero subdev format after init
- mediatek: some fixes for 4K decoder formats
- fix a Sphinx build warning (missing doc for client_caps)
- some fixes for imx and atomisp staging drivers
And two CEC core fixes:
- don't set last_initiator if TX in progress
- disable adapter in cec_devnode_unregister"
* tag 'media/v6.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: uvcvideo: Don't expose unsupported formats to userspace
media: v4l2-subdev: Fix missing kerneldoc for client_caps
media: staging: media: imx: initialize hs_settle to avoid warning
media: v4l2-mc: Drop subdev check in v4l2_create_fwnode_links_to_pad()
media: staging: media: atomisp: init high & low vars
media: cec: core: don't set last_initiator if tx in progress
media: cec: core: disable adapter in cec_devnode_unregister
media: mediatek: vcodec: Only apply 4K frame sizes on decoder formats
media: camss: camss-video: Don't zero subdev format again after initialization
media: verisilicon: Additional fix for the crash when opening the driver
Pull char/misc driver fixes from Greg KH:
"Here are a bunch of tiny char/misc/other driver fixes for 6.4-rc5 that
resolve a number of reported issues. Included in here are:
- iio driver fixes
- fpga driver fixes
- test_firmware bugfixes
- fastrpc driver tiny bugfixes
- MAINTAINERS file updates for some subsystems
All of these have been in linux-next this past week with no reported
issues"
* tag 'char-misc-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (34 commits)
test_firmware: fix the memory leak of the allocated firmware buffer
test_firmware: fix a memory leak with reqs buffer
test_firmware: prevent race conditions by a correct implementation of locking
firmware_loader: Fix a NULL vs IS_ERR() check
MAINTAINERS: Vaibhav Gupta is the new ipack maintainer
dt-bindings: fpga: replace Ivan Bornyakov maintainership
MAINTAINERS: update Microchip MPF FPGA reviewers
misc: fastrpc: reject new invocations during device removal
misc: fastrpc: return -EPIPE to invocations on device removal
misc: fastrpc: Reassign memory ownership only for remote heap
misc: fastrpc: Pass proper scm arguments for secure map request
iio: imu: inv_icm42600: fix timestamp reset
iio: adc: ad_sigma_delta: Fix IRQ issue by setting IRQ_DISABLE_UNLAZY flag
dt-bindings: iio: adc: renesas,rcar-gyroadc: Fix adi,ad7476 compatible value
iio: dac: mcp4725: Fix i2c_master_send() return value handling
iio: accel: kx022a fix irq getting
iio: bu27034: Ensure reset is written
iio: dac: build ad5758 driver when AD5758 is selected
iio: addac: ad74413: fix resistance input processing
iio: light: vcnl4035: fixed chip ID check
...
Pull driver core fixes from Greg KH:
"Here are two small driver core cacheinfo fixes for 6.4-rc5 that
resolve a number of reported issues with that file. These changes have
been in linux-next this past week with no reported problems"
* tag 'driver-core-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: base: cacheinfo: Update cpu_map_populated during CPU Hotplug
drivers: base: cacheinfo: Fix shared_cpu_map changes in event of CPU hotplug
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty/serial driver fixes for 6.4-rc5 that have all
been in linux-next this past week with no reported problems. Included
in here are:
- 8250_tegra driver bugfix
- fsl uart driver bugfixes
- Kconfig fix for dependancy issue
- dt-bindings fix for the 8250_omap driver"
* tag 'tty-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
dt-bindings: serial: 8250_omap: add rs485-rts-active-high
serial: cpm_uart: Fix a COMPILE_TEST dependency
soc: fsl: cpm1: Fix TSA and QMC dependencies in case of COMPILE_TEST
tty: serial: fsl_lpuart: use UARTCTRL_TXINV to send break instead of UARTCTRL_SBK
serial: 8250_tegra: Fix an error handling path in tegra_uart_probe()
Pull USB fixes from Greg KH:
"Here are some USB driver and core fixes for 6.4-rc5. Most of these are
tiny driver fixes, including:
- udc driver bugfix
- f_fs gadget driver bugfix
- cdns3 driver bugfix
- typec bugfixes
But the "big" thing in here is a fix yet-again for how the USB buffers
are handled from userspace when dealing with DMA issues. The changes
were discussed a lot, and tested a lot, on the list, and acked by the
relevant mm maintainers and have been in linux-next all this past week
with no reported problems"
* tag 'usb-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: tps6598x: Fix broken polling mode after system suspend/resume
mm: page_table_check: Ensure user pages are not slab pages
mm: page_table_check: Make it dependent on EXCLUSIVE_SYSTEM_RAM
usb: usbfs: Use consistent mmap functions
usb: usbfs: Enforce page requirements for mmap
dt-bindings: usb: snps,dwc3: Fix "snps,hsphy_interface" type
usb: gadget: udc: fix NULL dereference in remove()
usb: gadget: f_fs: Add unbind event before functionfs_unbind
usb: cdns3: fix NCM gadget RX speed 20x slow than expection at iMX8QM
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Address some fallout of the locking rework, this time affecting the
way the vgic is configured
- Fix an issue where the page table walker frees a subtree and then
proceeds with walking what it has just freed...
- Check that a given PA donated to the guest is actually memory (only
affecting pKVM)
- Correctly handle MTE CMOs by Set/Way
- Fix the reported address of a watchpoint forwarded to userspace
- Fix the freeing of the root of stage-2 page tables
- Stop creating spurious PMU events to perform detection of the
default PMU and use the existing PMU list instead
x86:
- Fix a memslot lookup bug in the NX recovery thread that could
theoretically let userspace bypass the NX hugepage mitigation
- Fix a s/BLOCKING/PENDING bug in SVM's vNMI support
- Account exit stats for fastpath VM-Exits that never leave the super
tight run-loop
- Fix an out-of-bounds bug in the optimized APIC map code, and add a
regression test for the race"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: Add test for race in kvm_recalculate_apic_map()
KVM: x86: Bail from kvm_recalculate_phys_map() if x2APIC ID is out-of-bounds
KVM: x86: Account fastpath-only VM-Exits in vCPU stats
KVM: SVM: vNMI pending bit is V_NMI_PENDING_MASK not V_NMI_BLOCKING_MASK
KVM: x86/mmu: Grab memslot for correct address space in NX recovery worker
KVM: arm64: Document default vPMU behavior on heterogeneous systems
KVM: arm64: Iterate arm_pmus list to probe for default PMU
KVM: arm64: Drop last page ref in kvm_pgtable_stage2_free_removed()
KVM: arm64: Populate fault info for watchpoint
KVM: arm64: Reload PTE after invoking walker callback on preorder traversal
KVM: arm64: Handle trap of tagged Set/Way CMOs
arm64: Add missing Set/Way CMO encodings
KVM: arm64: Prevent unconditional donation of unmapped regions from the host
KVM: arm64: vgic: Fix a comment
KVM: arm64: vgic: Fix locking comment
KVM: arm64: vgic: Wrap vgic_its_create() with config_lock
KVM: arm64: vgic: Fix a circular locking issue
Pull powerpc fixes from Michael Ellerman:
- Fix link errors in new aes-gcm-p10 code when built-in with other
drivers
- Limit number of TCEs passed to H_STUFF_TCE hcall as per spec
- Use KSYM_NAME_LEN in xmon array size to avoid possible OOB write
Thanks to Gaurav Batra and Maninder Singh Vishal Chourasia.
* tag 'powerpc-6.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/xmon: Use KSYM_NAME_LEN in array size
powerpc/iommu: Limit number of TCEs to 512 for H_STUFF_TCE hcall
powerpc/crypto: Fix aes-gcm-p10 link errors
KVM x86 fixes for 6.4
- Fix a memslot lookup bug in the NX recovery thread that could
theoretically let userspace bypass the NX hugepage mitigation
- Fix a s/BLOCKING/PENDING bug in SVM's vNMI support
- Account exit stats for fastpath VM-Exits that never leave the super
tight run-loop
- Fix an out-of-bounds bug in the optimized APIC map code, and add a
regression test for the race.
KVM/arm64 fixes for 6.4, take #3
- Fix the reported address of a watchpoint forwarded to userspace
- Fix the freeing of the root of stage-2 page tables
- Stop creating spurious PMU events to perform detection of the
default PMU and use the existing PMU list instead.
KVM/arm64 fixes for 6.4, take #2
- Address some fallout of the locking rework, this time affecting
the way the vgic is configured
- Fix an issue where the page table walker frees a subtree and
then proceeds with walking what it has just freed...
- Check that a given PA donated to the gues is actually memory
(only affecting pKVM)
- Correctly handle MTE CMOs by Set/Way
Pull SCSI fixes from James Bottomley:
"Five fixes, all in drivers.
The most extensive is the target change to fix the hang in the login
code, which involves changing timers from per login to per connection"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: stex: Fix gcc 13 warnings
scsi: qla2xxx: Fix NULL pointer dereference in target mode
scsi: target: iscsi: Prevent login threads from racing between each other
scsi: target: iscsi: Remove unused transport_timer
scsi: target: iscsi: Fix hang in the iSCSI login code
Pull LED fix from Johan Hovold:
"Here's a fix for a regression in 6.4-rc1 which broke the backlight on
machines such as the Lenovo ThinkPad X13s"
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/lkml/20230602091928.GR449117@google.com/
* tag 'leds-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/linux:
leds: qcom-lpg: Fix PWM period limits
The introduction of high resolution PWM support changed the order of the
operations in the calculation of min and max period. The result in both
divisions is in most cases a truncation to 0, which limits the period to
the range of [0, 0].
Both numerators (and denominators) are within 64 bits, so the whole
expression can be put directly into the div64_u64, instead of doing it
partially.
Fixes: b00d2ed376 ("leds: rgb: leds-qcom-lpg: Add support for high resolution PWM")
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Acked-by: Lee Jones <lee@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Link: https://lore.kernel.org/r/20230515162604.649203-1-quic_bjorande@quicinc.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Pull probes fixes from Masami Hiramatsu:
- Return NULL if the trace_probe list on trace_probe_event is empty
- selftests/ftrace: Choose testing symbol name for filtering feature
from sample data instead of fixed symbol
* tag 'probes-fixes-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
selftests/ftrace: Choose target function for filter test from samples
tracing/probe: trace_probe_primary_from_call(): checked list_first_entry
Keep switching between LAPIC_MODE_X2APIC and LAPIC_MODE_DISABLED during
APIC map construction to hunt for TOCTOU bugs in KVM. KVM's optimized map
recalc makes multiple passes over the list of vCPUs, and the calculations
ignore vCPU's whose APIC is hardware-disabled, i.e. there's a window where
toggling LAPIC_MODE_DISABLED is quite interesting.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20230602233250.1014316-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Bail from kvm_recalculate_phys_map() and disable the optimized map if the
target vCPU's x2APIC ID is out-of-bounds, i.e. if the vCPU was added
and/or enabled its local APIC after the map was allocated. This fixes an
out-of-bounds access bug in the !x2apic_format path where KVM would write
beyond the end of phys_map.
Check the x2APIC ID regardless of whether or not x2APIC is enabled,
as KVM's hardcodes x2APIC ID to be the vCPU ID, i.e. it can't change, and
the map allocation in kvm_recalculate_apic_map() doesn't check for x2APIC
being enabled, i.e. the check won't get false postivies.
Note, this also affects the x2apic_format path, which previously just
ignored the "x2apic_id > new->max_apic_id" case. That too is arguably a
bug fix, as ignoring the vCPU meant that KVM would not send interrupts to
the vCPU until the next map recalculation. In practice, that "bug" is
likely benign as a newly present vCPU/APIC would immediately trigger a
recalc. But, there's no functional downside to disabling the map, and
a future patch will gracefully handle the -E2BIG case by retrying instead
of simply disabling the optimized map.
Opportunistically add a sanity check on the xAPIC ID size, along with a
comment explaining why the xAPIC ID is guaranteed to be "good".
Reported-by: Michal Luczaj <mhal@rbox.co>
Fixes: 5b84b02917 ("KVM: x86: Honor architectural behavior for aliased 8-bit APIC IDs")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230602233250.1014316-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Increment vcpu->stat.exits when handling a fastpath VM-Exit without
going through any part of the "slow" path. Not bumping the exits stat
can result in wildly misleading exit counts, e.g. if the primary reason
the guest is exiting is to program the TSC deadline timer.
Fixes: 404d5d7bff ("KVM: X86: Introduce more exit_fastpath_completion enum values")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230602011920.787844-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
While testing Hyper-V enabled Windows Server 2019 guests on Zen4 hardware
I noticed that with vCPU count large enough (> 16) they sometimes froze at
boot.
With vCPU count of 64 they never booted successfully - suggesting some kind
of a race condition.
Since adding "vnmi=0" module parameter made these guests boot successfully
it was clear that the problem is most likely (v)NMI-related.
Running kvm-unit-tests quickly showed failing NMI-related tests cases, like
"multiple nmi" and "pending nmi" from apic-split, x2apic and xapic tests
and the NMI parts of eventinj test.
The issue was that once one NMI was being serviced no other NMI was allowed
to be set pending (NMI limit = 0), which was traced to
svm_is_vnmi_pending() wrongly testing for the "NMI blocked" flag rather
than for the "NMI pending" flag.
Fix this by testing for the right flag in svm_is_vnmi_pending().
Once this is done, the NMI-related kvm-unit-tests pass successfully and
the Windows guest no longer freezes at boot.
Fixes: fa4c027a79 ("KVM: x86: Add support for SVM's Virtual NMI")
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/be4ca192eb0c1e69a210db3009ca984e6a54ae69.1684495380.git.maciej.szmigiero@oracle.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Factor in the address space (non-SMM vs. SMM) of the target shadow page
when recovering potential NX huge pages, otherwise KVM will retrieve the
wrong memslot when zapping shadow pages that were created for SMM. The
bug most visibly manifests as a WARN on the memslot being non-NULL, but
the worst case scenario is that KVM could unaccount the shadow page
without ensuring KVM won't install a huge page, i.e. if the non-SMM slot
is being dirty logged, but the SMM slot is not.
------------[ cut here ]------------
WARNING: CPU: 1 PID: 3911 at arch/x86/kvm/mmu/mmu.c:7015
kvm_nx_huge_page_recovery_worker+0x38c/0x3d0 [kvm]
CPU: 1 PID: 3911 Comm: kvm-nx-lpage-re
RIP: 0010:kvm_nx_huge_page_recovery_worker+0x38c/0x3d0 [kvm]
RSP: 0018:ffff99b284f0be68 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff99b284edd000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff9271397024e0 R08: 0000000000000000 R09: ffff927139702450
R10: 0000000000000000 R11: 0000000000000001 R12: ffff99b284f0be98
R13: 0000000000000000 R14: ffff9270991fcd80 R15: 0000000000000003
FS: 0000000000000000(0000) GS:ffff927f9f640000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0aacad3ae0 CR3: 000000088fc2c005 CR4: 00000000003726e0
Call Trace:
<TASK>
__pfx_kvm_nx_huge_page_recovery_worker+0x10/0x10 [kvm]
kvm_vm_worker_thread+0x106/0x1c0 [kvm]
kthread+0xd9/0x100
ret_from_fork+0x2c/0x50
</TASK>
---[ end trace 0000000000000000 ]---
This bug was exposed by commit edbdb43fc9 ("KVM: x86: Preserve TDP MMU
roots until they are explicitly invalidated"), which allowed KVM to retain
SMM TDP MMU roots effectively indefinitely. Before commit edbdb43fc9,
KVM would zap all SMM TDP MMU roots and thus all SMM TDP MMU shadow pages
once all vCPUs exited SMM, which made the window where this bug (recovering
an SMM NX huge page) could be encountered quite tiny. To hit the bug, the
NX recovery thread would have to run while at least one vCPU was in SMM.
Most VMs typically only use SMM during boot, and so the problematic shadow
pages were gone by the time the NX recovery thread ran.
Now that KVM preserves TDP MMU roots until they are explicitly invalidated
(e.g. by a memslot deletion), the window to trigger the bug is effectively
never closed because most VMMs don't delete memslots after boot (except
for a handful of special scenarios).
Fixes: eb29860570 ("KVM: x86/mmu: Do not recover dirty-tracked NX Huge Pages")
Reported-by: Fabio Coatti <fabio.coatti@gmail.com>
Closes: https://lore.kernel.org/all/CADpTngX9LESCdHVu_2mQkNGena_Ng2CphWNwsRGSMxzDsTjU2A@mail.gmail.com
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230602010137.784664-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
With commit 858e8b792d ("tpm, tpm_tis: Avoid cache incoherency in test
for interrupts") bit accessor functions are used to access flags in
tpm_tis_data->flags.
However these functions expect bit numbers, while the flags are defined
as bit masks in enum tpm_tis_flag.
Fix this inconsistency by using numbers instead of masks also for the
flags in the enum.
Reported-by: Pavel Machek <pavel@denx.de>
Fixes: 858e8b792d ("tpm, tpm_tis: Avoid cache incoherency in test for interrupts")
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Cc: stable@vger.kernel.org
Reviewed-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull ext4 fix from Ted Ts'o:
"Fix an ext4 regression which landed during the 6.4 merge window"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
Revert "ext4: remove ac->ac_found > sbi->s_mb_min_to_scan dead check in ext4_mb_check_limits"
Pull btrfs fix from David Sterba:
"One regression fix.
The rewrite of scrub code in 6.4 broke device replace in zoned mode,
some of the writes could happen out of order so this had to be
adjusted for all cases"
* tag 'for-6.4-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: fix dev-replace after the scrub rework
This reverts commit 32c0869370.
The reverted commit was intended to remove a dead check however it was observed
that this check was actually being used to exit early instead of looping
sbi->s_mb_max_to_scan times when we are able to find a free extent bigger than
the goal extent. Due to this, a my performance tests (fsmark, parallel file
writes in a highly fragmented FS) were seeing a 2x-3x regression.
Example, the default value of the following variables is:
sbi->s_mb_max_to_scan = 200
sbi->s_mb_min_to_scan = 10
In ext4_mb_check_limits() if we find an extent smaller than goal, then we return
early and try again. This loop will go on until we have processed
sbi->s_mb_max_to_scan(=200) number of free extents at which point we exit and
just use whatever we have even if it is smaller than goal extent.
Now, the regression comes when we find an extent bigger than goal. Earlier, in
this case we would loop only sbi->s_mb_min_to_scan(=10) times and then just use
the bigger extent. However with commit 32c08693 that check was removed and hence
we would loop sbi->s_mb_max_to_scan(=200) times even though we have a big enough
free extent to satisfy the request. The only time we would exit early would be
when the free extent is *exactly* the size of our goal, which is pretty uncommon
occurrence and so we would almost always end up looping 200 times.
Hence, revert the commit by adding the check back to fix the regression. Also
add a comment to outline this policy.
Fixes: 32c0869370 ("ext4: remove ac->ac_found > sbi->s_mb_min_to_scan dead check in ext4_mb_check_limits")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/ddcae9658e46880dfec2fb0aa61d01fb3353d202.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When the uvcvideo driver encounters a format descriptor with an unknown
format GUID, it creates a corresponding struct uvc_format instance with
the fcc field set to 0. Since commit 50459f103e ("media: uvcvideo:
Remove format descriptions"), the driver relies on the V4L2 core to
provide the format description string, which the V4L2 core can't do
without a valid 4CC. This triggers a WARN_ON.
As a format with a zero 4CC can't be selected, it is unusable for
applications. Ignore the format completely without creating a uvc_format
instance, which fixes the warning.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217252
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2180107
Fixes: 50459f103e ("media: uvcvideo: Remove format descriptions")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Pull RISC-V fixes from Palmer Dabbelt:
- A build warning fix for BUILTIN_DTB=y
- Hibernation support is hidden behind NONPORTABLE, as it depends on
some undocumented early boot behavior and breaks on most platforms
- A fix for relocatable kernels on systems with early boot errata
- A fix to properly handle perf callchains for kernel tracepoints
- A pair of fixes for NAPOT to avoid inconsistencies between PTEs and
handle hardware that sets arbitrary A/D bits
* tag 'riscv-for-linus-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Implement missing huge_ptep_get
riscv: Fix huge_ptep_set_wrprotect when PTE is a NAPOT
riscv: perf: Fix callchain parse error with kernel tracepoint events
riscv: Fix relocatable kernels with early alternatives using -fno-pie
RISC-V: mark hibernation as nonportable
riscv: Fix unused variable warning when BUILTIN_DTB is set
Initialize hs_settle to 0 to avoid this compiler warning:
imx8mq-mipi-csi2.c: In function 'imx8mq_mipi_csi_start_stream.part.0':
imx8mq-mipi-csi2.c:91:55: warning: 'hs_settle' may be used uninitialized [-Wmaybe-uninitialized]
91 | #define GPR_CSI2_1_S_PRG_RXHS_SETTLE(x) (((x) & 0x3f) << 2)
| ^~
imx8mq-mipi-csi2.c:357:13: note: 'hs_settle' was declared here
357 | u32 hs_settle;
| ^~~~~~~~~
It's a false positive, but it is too complicated for the compiler to detect that.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
While updating v4l2_create_fwnode_links_to_pad() to accept non-subdev
sinks, the check is_media_entity_v4l2_subdev() was not removed which
prevented the function from being used with non-subdev sinks, Drop the
unnecessary check.
Fixes: bd5a03bc5b ("media: Accept non-subdev sinks in v4l2_create_fwnode_links_to_pad()")
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Pull nfsd fixes from Chuck Lever:
- Two minor bug fixes
* tag 'nfsd-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: fix double fget() bug in __write_ports_addfd()
nfsd: make a copy of struct iattr before calling notify_change
Pull block fixes from Jens Axboe:
"Just an NVMe pull request with (mostly) KATO fixes, a regression fix
for zoned device revalidation, and a fix for an md raid5 regression"
* tag 'block-6.4-2023-06-02' of git://git.kernel.dk/linux:
nvme: fix the name of Zone Append for verbose logging
nvme: improve handling of long keep alives
nvme: check IO start time when deciding to defer KA
nvme: double KA polling frequency to avoid KATO with TBKAS on
nvme: fix miss command type check
block: fix revalidate performance regression
md/raid5: fix miscalculation of 'end_sector' in raid5_read_one_chunk()
Pull io_uring fix from Jens Axboe:
"Just a single revert in here, removing the warning on the epoll ctl
opcode.
We originally deprecated this a few releases ago, but I've since had
two people report that it's being used. Which isn't the biggest deal,
obviously this is why we out in the deprecation notice in the first
place, but it also means that we should just kill this warning again
and abandon the deprecation plans.
Since it's only a few handfuls of code to support epoll ctl, not worth
going any further with this imho"
* tag 'io_uring-6.4-2023-06-02' of git://git.kernel.dk/linux:
io_uring: undeprecate epoll_ctl support
Pull drm fixes from Dave Airlie:
"Quiet enough week, though the misc fixes tree didn't get to me when I
was sending this, so maybe it'll be a bit bigger next week, just one
i915 fix and some scattered amdgpu fixes:
amdgpu:
- Fix mclk and fclk output ordering on some APUs
- Fix display regression with 5K VRR
- VCN, JPEG spurious interrupt warning fixes
- Fix SI DPM on some ARM64 platforms
- Fix missing TMZ enablement on GC 11.0.1
i915:
- Fix for OA reporting to allow detecting non-power-of-two reports"
* tag 'drm-fixes-2023-06-02' of git://anongit.freedesktop.org/drm/drm:
drm/i915/perf: Clear out entire reports after reading if not power of 2 size
drm/amdgpu: enable tmz by default for GC 11.0.1
drm/amd/pm: resolve reboot exception for si oland
drm/amdgpu: add RAS POISON interrupt funcs for jpeg_v4_0
drm/amdgpu: add RAS POISON interrupt funcs for jpeg_v2_6
drm/amdgpu: separate ras irq from jpeg instance irq for UVD_POISON
drm/amdgpu: add RAS POISON interrupt funcs for vcn_v4_0
drm/amdgpu: add RAS POISON interrupt funcs for vcn_v2_6
drm/amdgpu: separate ras irq from vcn instance irq for UVD_POISON
Revert "drm/amd/display: Do not set drr on pipe commit"
Revert "drm/amd/display: Block optimize on consecutive FAMS enables"
drm/amd/pm: reverse mclk and fclk clocks levels for renoir
drm/amd/pm: reverse mclk and fclk clocks levels for vangogh
drm/amd/pm: reverse mclk and fclk clocks levels for yellow carp
drm/amd/pm: reverse mclk clocks levels for SMU v13.0.5
drm/amd/pm: reverse mclk and fclk clocks levels for SMU v13.0.4
Pull selinux fix from Paul Moore:
"A small SELinux Makefile fix to resolve a problem seen when building
the kernel with older versions of make.
The fix is pretty trivial and effectively reverts a patch that was
merged during the last merge window"
* tag 'selinux-pr-20230601' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: don't use make's grouped targets feature yet
Pull modules fix from Luis Chamberlain:
"A zstd fix by lucas as he tested zstd decompression support"
* tag 'modules-6.4-rc5-second-pull' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module/decompress: Fix error checking on zstd decompression
