Panel replay was enabled by default in commit 5950efe25e
("drm/amd/display: Enable Panel Replay for static screen use case"), but
it isn't working properly at least on some BOE and AUO panels. Instead
of being static the screen is solid black when active. As it's a new
feature that was just introduced that regressed VRR disable it for now
so that problem can be properly root caused.
Cc: Tom Chung <chiahsuan.chung@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3344
Fixes: 5950efe25e ("drm/amd/display: Enable Panel Replay for static screen use case")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a race condition when re-creating a kfd_process for a process.
This has been observed when a process under the debugger executes
exec(3). In this scenario:
- The process executes exec.
- This will eventually release the process's mm, which will cause the
kfd_process object associated with the process to be freed
(kfd_process_free_notifier decrements the reference count to the
kfd_process to 0). This causes kfd_process_ref_release to enqueue
kfd_process_wq_release to the kfd_process_wq.
- The debugger receives the PTRACE_EVENT_EXEC notification, and tries to
re-enable AMDGPU traps (KFD_IOC_DBG_TRAP_ENABLE).
- When handling this request, KFD tries to re-create a kfd_process.
This eventually calls kfd_create_process and kobject_init_and_add.
At this point the call to kobject_init_and_add can fail because the
old kfd_process.kobj has not been freed yet by kfd_process_wq_release.
This patch proposes to avoid this race by making sure to drain
kfd_process_wq before creating a new kfd_process object. This way, we
know that any cleanup task is done executing when we reach
kobject_init_and_add.
Signed-off-by: Lancelot SIX <lancelot.six@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why && How]
Screen flickering saw on 4K@60 eDP with high refresh rate external
monitor when booting up in DC mode. DC Mode Capping is disabled
which caused wrong UCLK being used.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts drm/amdgpu: fix ftrace event amdgpu_bo_move always move
on same heap. The basic problem here is that after the move the old
location is simply not available any more.
Some fixes were suggested, but essentially we should call the move
notification before actually moving things because only this way we have
the correct order for DMA-buf and VM move notifications as well.
Also rework the statistic handling so that we don't update the eviction
counter before the move.
v2: add missing NULL check
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: 94aeb41173 ("drm/amdgpu: fix ftrace event amdgpu_bo_move always move on same heap")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3171
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CC: stable@vger.kernel.org
[Why]
During DP tunnel creation, CM preallocates BW and reduces
estimated BW of other DPIA. CM release preallocation only
when allocation is complete. Display mode validation logic
validates timings based on bw available per host router.
In multi display setup, this causes bw allocation failure
when allocation greater than estimated bw.
[How]
Do zero alloc to make the CM to release preallocation and
update estimated BW correctly for all DPIAs per host router.
Reviewed-by: PeiChen Huang <peichen.huang@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why] DSC debugfs, such as dp_dsc_clock_en_read,
use aconnector->dc_link to find pipe_ctx for display.
Displays connected to MST hub share the same dc_link.
DSC instance is from pipe_ctx. This causes incorrect
DSC instance for display connected to MST hub.
[How] Add aconnector->sink check to find pipe_ctx.
CC: stable@vger.kernel.org
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
New request from KMD/VBIOS in order to support new UMA carveout
model. This fixes a null dereference from accessing
Ctx->dc_bios->integrated_info while it was NULL.
DAL parses through the BIOS and extracts the necessary
integrated_info but was missing a case for the new BIOS
version 2.3.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Currently DCN315 clk manager is missing code to enable/disable dtbclk.
Because of this, "optimized_required" flag is constantly set
and this prevents FreeSync from engaging for certain high bandwidth
display Modes which require DTBCLK.
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Swapnil Patel <swapnil.patel@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Subtract the VRAM pinned memory when checking for available memory
in amdgpu_amdkfd_reserve_mem_limit function since that memory is not
available for use.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pull scheduler fixes from Ingo Molnar:
- Fix EEVDF corner cases
- Fix two nohz_full= related bugs that can cause boot crashes
and warnings
* tag 'sched-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/isolation: Fix boot crash when maxcpus < first housekeeping CPU
sched/isolation: Prevent boot crash when the boot CPU is nohz_full
sched/eevdf: Prevent vlag from going out of bounds in reweight_eevdf()
sched/eevdf: Fix miscalculation in reweight_entity() when se is not curr
sched/eevdf: Always update V if se->on_rq when reweighting
Pull x86 fixes from Ingo Molnar:
- Make the CPU_MITIGATIONS=n interaction with conflicting
mitigation-enabling boot parameters a bit saner.
- Re-enable CPU mitigations by default on non-x86
- Fix TDX shared bit propagation on mprotect()
- Fix potential show_regs() system hang when PKE initialization
is not fully finished yet.
- Add the 0x10-0x1f model IDs to the Zen5 range
- Harden #VC instruction emulation some more
* tag 'x86-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Ignore "mitigations" kernel parameter if CPU_MITIGATIONS=n
cpu: Re-enable CPU mitigations by default for !X86 architectures
x86/tdx: Preserve shared bit on mprotect()
x86/cpu: Fix check for RDPKRU in __show_regs()
x86/CPU/AMD: Add models 0x10-0x1f to the Zen5 range
x86/sev: Check for MWAITX and MONITORX opcodes in the #VC handler
Pull irq fix from Ingo Molnar:
"Fix a double free bug in the init error path of the GICv3 irqchip
driver"
* tag 'irq-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Prevent double free on error
housekeeping_setup() checks cpumask_intersects(present, online) to ensure
that the kernel will have at least one housekeeping CPU after smp_init(),
but this doesn't work if the maxcpus= kernel parameter limits the number of
processors available after bootup.
For example, a kernel with "maxcpus=2 nohz_full=0-2" parameters crashes at
boot time on a virtual machine with 4 CPUs.
Change housekeeping_setup() to use cpumask_first_and() and check that the
returned CPU number is valid and less than setup_max_cpus.
Another corner case is "nohz_full=0" on a machine with a single CPU or with
the maxcpus=1 kernel argument. In this case non_housekeeping_mask is empty
and tick_nohz_full_setup() makes no sense. And indeed, the kernel hits the
WARN_ON(tick_nohz_full_running) in tick_sched_do_timer().
And how should the kernel interpret the "nohz_full=" parameter? It should
be silently ignored, but currently cpulist_parse() happily returns the
empty cpumask and this leads to the same problem.
Change housekeeping_setup() to check cpumask_empty(non_housekeeping_mask)
and do nothing in this case.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240413141746.GA10008@redhat.com
Documentation/timers/no_hz.rst states that the "nohz_full=" mask must not
include the boot CPU, which is no longer true after:
08ae95f4fd ("nohz_full: Allow the boot CPU to be nohz_full").
However after:
aae17ebb53 ("workqueue: Avoid using isolated cpus' timers on queue_delayed_work")
the kernel will crash at boot time in this case; housekeeping_any_cpu()
returns an invalid CPU number until smp_init() brings the first
housekeeping CPU up.
Change housekeeping_any_cpu() to check the result of cpumask_any_and() and
return smp_processor_id() in this case.
This is just the simple and backportable workaround which fixes the
symptom, but smp_processor_id() at boot time should be safe at least for
type == HK_TYPE_TIMER, this more or less matches the tick_do_timer_boot_cpu
logic.
There is no worry about cpu_down(); tick_nohz_cpu_down() will not allow to
offline tick_do_timer_cpu (the 1st online housekeeping CPU).
Fixes: aae17ebb53 ("workqueue: Avoid using isolated cpus' timers on queue_delayed_work")
Reported-by: Chris von Recklinghausen <crecklin@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240411143905.GA19288@redhat.com
Closes: https://lore.kernel.org/all/20240402105847.GA24832@redhat.com/
Pull Rust fixes from Miguel Ojeda:
- Soundness: make internal functions generated by the 'module!' macro
inaccessible, do not implement 'Zeroable' for 'Infallible' and
require 'Send' for the 'Module' trait.
- Build: avoid errors with "empty" files and workaround 'rustdoc' ICE.
- Kconfig: depend on '!CFI_CLANG' and avoid selecting 'CONSTRUCTORS'.
- Code docs: remove non-existing key from 'module!' macro example.
- Docs: trivial rendering fix in arch table.
* tag 'rust-fixes-6.9' of https://github.com/Rust-for-Linux/linux:
rust: remove `params` from `module` macro example
kbuild: rust: force `alloc` extern to allow "empty" Rust files
kbuild: rust: remove unneeded `@rustc_cfg` to avoid ICE
rust: kernel: require `Send` for `Module` implementations
rust: phy: implement `Send` for `Registration`
rust: make mutually exclusive with CFI_CLANG
rust: macros: fix soundness issue in `module!` macro
rust: init: remove impl Zeroable for Infallible
docs: rust: fix improper rendering in Arch Support page
rust: don't select CONSTRUCTORS
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for TASK_SIZE on rv64/NOMMU, to reflect the lack of user/kernel
separation
- A fix to avoid loading rv64/NOMMU kernel past the start of RAM
- A fix for RISCV_HWPROBE_EXT_ZVFHMIN on ilp32 to avoid signed integer
overflow in the bitmask
- The sud_test kselftest has been fixed to properly swizzle the syscall
number into the return register, which are not the same on RISC-V
- A fix for a build warning in the perf tools on rv32
- A fix for the CBO selftests, to avoid non-constants leaking into the
inline asm
- A pair of fixes for T-Head PBMT errata probing, which has been
renamed MAE by the vendor
* tag 'riscv-for-linus-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: selftests: cbo: Ensure asm operands match constraints, take 2
perf riscv: Fix the warning due to the incompatible type
riscv: T-Head: Test availability bit before enabling MAE errata
riscv: thead: Rename T-Head PBMT to MAE
selftests: sud_test: return correct emulated syscall value on RISC-V
riscv: hwprobe: fix invalid sign extension for RISCV_HWPROBE_EXT_ZVFHMIN
riscv: Fix loading 64-bit NOMMU kernels past the start of RAM
riscv: Fix TASK_SIZE on 64-bit NOMMU
Pull smb client fixes from Steve French:
"Three smb3 client fixes, all also for stable:
- two small locking fixes spotted by Coverity
- FILE_ALL_INFO and network_open_info packing fix"
* tag '6.9-rc5-cifs-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: fix lock ordering potential deadlock in cifs_sync_mid_result
smb3: missing lock when picking channel
smb: client: Fix struct_group() usage in __packed structs
Pull i2c fixes from Wolfram Sang:
"Fix a race condition in the at24 eeprom handler, a NULL pointer
exception in the I2C core for controllers only using target modes,
drop a MAINTAINERS entry, and fix an incorrect DT binding for at24"
* tag 'i2c-for-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: smbus: fix NULL function pointer dereference
MAINTAINERS: Drop entry for PCA9541 bus master selector
eeprom: at24: fix memory corruption race condition
dt-bindings: eeprom: at24: Fix ST M24C64-D compatible schema
Pull soundwire fix from Vinod Koul:
- Single AMD driver fix for wake interrupt handling in clockstop mode
* tag 'soundwire-6.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: amd: fix for wake interrupt handling for clockstop mode
Pull dmaengine fixes from Vinod Koul:
- Revert pl330 issue_pending waits until WFP state due to regression
reported in Bluetooth loading
- Xilinx driver fixes for synchronization, buffer offsets, locking and
kdoc
- idxd fixes for spinlock and preventing the migration of the perf
context to an invalid target
- idma driver fix for interrupt handling when powered off
- Tegra driver residual calculation fix
- Owl driver register access fix
* tag 'dmaengine-fix-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: idxd: Fix oops during rmmod on single-CPU platforms
dmaengine: xilinx: xdma: Clarify kdoc in XDMA driver
dmaengine: xilinx: xdma: Fix synchronization issue
dmaengine: xilinx: xdma: Fix wrong offsets in the buffers addresses in dma descriptor
dma: xilinx_dpdma: Fix locking
dmaengine: idxd: Convert spinlock to mutex to lock evl workqueue
idma64: Don't try to serve interrupts when device is powered off
dmaengine: tegra186: Fix residual calculation
dmaengine: owl: fix register access functions
dmaengine: Revert "dmaengine: pl330: issue_pending waits until WFP state"
Pull phy fixes from Vinod Koul:
- static checker (array size, bounds) fix for marvel driver
- Rockchip rk3588 pcie fixes for bifurcation and mux
- Qualcomm qmp-compbo fix for VCO, register base and regulator name for
m31 driver
- charger det crash fix for ti driver
* tag 'phy-fixes-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: ti: tusb1210: Resolve charger-det crash if charger psy is unregistered
phy: qcom: qmp-combo: fix VCO div offset on v5_5nm and v6
phy: phy-rockchip-samsung-hdptx: Select CONFIG_RATIONAL
phy: qcom: m31: match requested regulator name with dt schema
phy: qcom: qmp-combo: Fix register base for QSERDES_DP_PHY_MODE
phy: qcom: qmp-combo: Fix VCO div offset on v3
phy: rockchip: naneng-combphy: Fix mux on rk3588
phy: rockchip-snps-pcie3: fix clearing PHP_GRF_PCIESEL_CON bits
phy: rockchip-snps-pcie3: fix bifurcation on rk3588
phy: freescale: imx8m-pcie: fix pcie link-up instability
phy: marvell: a3700-comphy: Fix hardcoded array size
phy: marvell: a3700-comphy: Fix out of bounds read
Pull ARM SoC fixes from Arnd Bergmann:
"There are a lot of minor DT fixes for Mediatek, Rockchip, Qualcomm and
Microchip and NXP, addressing both build-time warnings and bugs found
during runtime testing.
Most of these changes are machine specific fixups, but there are a few
notable regressions that affect an entire SoC:
- The Qualcomm MSI support that was improved for 6.9 ended up being
wrong on some chips and now gets fixed.
- The i.MX8MP camera interface broke due to a typo and gets updated
again.
The main driver fix is also for Qualcomm platforms, rewriting an
interface in the QSEECOM firmware support that could lead to crashing
the kernel from a trusted application.
The only other code changes are minor fixes for Mediatek SoC drivers"
* tag 'soc-fixes-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
ARM: dts: imx6ull-tarragon: fix USB over-current polarity
soc: mediatek: mtk-socinfo: depends on CONFIG_SOC_BUS
soc: mediatek: mtk-svs: Append "-thermal" to thermal zone names
arm64: dts: imx8mp: Fix assigned-clocks for second CSI2
ARM: dts: microchip: at91-sama7g54_curiosity: Replace regulator-suspend-voltage with the valid property
ARM: dts: microchip: at91-sama7g5ek: Replace regulator-suspend-voltage with the valid property
arm64: dts: rockchip: Fix USB interface compatible string on kobol-helios64
arm64: dts: qcom: sc8180x: Fix ss_phy_irq for secondary USB controller
arm64: dts: qcom: sm8650: Fix the msi-map entries
arm64: dts: qcom: sm8550: Fix the msi-map entries
arm64: dts: qcom: sm8450: Fix the msi-map entries
arm64: dts: qcom: sc8280xp: add missing PCIe minimum OPP
arm64: dts: qcom: x1e80100: Fix the compatible for cluster idle states
arm64: dts: qcom: Fix type of "wdog" IRQs for remoteprocs
arm64: dts: rockchip: regulator for sd needs to be always on for BPI-R2Pro
dt-bindings: rockchip: grf: Add missing type to 'pcie-phy' node
arm64: dts: rockchip: drop redundant disable-gpios in Lubancat 2
arm64: dts: rockchip: drop redundant disable-gpios in Lubancat 1
arm64: dts: rockchip: drop redundant pcie-reset-suspend in Scarlet Dumo
arm64: dts: rockchip: mark system power controller and fix typo on orangepi-5-plus
...
Pull misc fixes from Andrew Morton:
"11 hotfixes. 8 are cc:stable and the remaining 3 (nice ratio!) address
post-6.8 issues or aren't considered suitable for backporting.
All except one of these are for MM. I see no particular theme - it's
singletons all over"
* tag 'mm-hotfixes-stable-2024-04-26-13-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/hugetlb: fix DEBUG_LOCKS_WARN_ON(1) when dissolve_free_hugetlb_folio()
selftests: mm: protection_keys: save/restore nr_hugepages value from launch script
stackdepot: respect __GFP_NOLOCKDEP allocation flag
hugetlb: check for anon_vma prior to folio allocation
mm: zswap: fix shrinker NULL crash with cgroup_disable=memory
mm: turn folio_test_hugetlb into a PageType
mm: support page_mapcount() on page_has_type() pages
mm: create FOLIO_FLAG_FALSE and FOLIO_TYPE_OPS macros
mm/hugetlb: fix missing hugetlb_lock for resv uncharge
selftests: mm: fix unused and uninitialized variable warning
selftests/harness: remove use of LINE_MAX
Pull MMC host fixes from Ulf Hansson:
- moxart: Fix regression for sg_miter for PIO mode
- sdhci-msm: Avoid hang by preventing access to suspended controller
- sdhci-of-dwcmshc: Fix SD card tuning error for th1520
* tag 'mmc-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: moxart: fix handling of sgm->consumed, otherwise WARN_ON triggers
mmc: sdhci-of-dwcmshc: th1520: Increase tuning loop count to 128
mmc: sdhci-msm: pervent access to suspended controller
Pull MTD fixes from Miquel Raynal:
"There has been OTP support improvements in the NVMEM subsystem, and
later also improvements of OTP support in the NAND subsystem. This
lead to situations that we currently cannot handle, so better prevent
this situation from happening in order to avoid canceling device's
probe.
In the raw NAND subsystem, two runtime fixes have been shared, one
fixing two important commands in the Qcom driver since it got reworked
and a NULL pointer dereference happening on STB chips.
Arnd also fixed a UBSAN link failure on diskonchip"
* tag 'mtd/fixes-for-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: limit OTP NVMEM cell parse to non-NAND devices
mtd: diskonchip: work around ubsan link failure
mtd: rawnand: qcom: Fix broken OP_RESET_DEVICE command in qcom_misc_cmd_type_exec()
mtd: rawnand: brcmnand: Fix data access violation for STB chip
Pull gpio fixes from Bartosz Golaszewski:
- fix a regression in pin access control in gpio-tegra186
- make data pointer dereference robust in Intel Tangier driver
* tag 'gpio-fixes-for-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: tegra186: Fix tegra186_gpio_is_accessible() check
gpio: tangier: Use correct type for the IRQ chip data
Pull cxl fix from Dave Jiang:
- Fix potential payload size confusion in cxl_mem_get_poison()
* tag 'cxl-fixes-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/core: Fix potential payload size confusion in cxl_mem_get_poison()
Pull device mapper fixes from Mike Snitzer:
- Fix 6.9 regression so that DM device removal is performed
synchronously by default.
Asynchronous removal has always been possible but it isn't the
default. It is important that synchronous removal be preserved,
otherwise it is an interface change that breaks lvm2.
- Remove errant semicolon in drivers/md/dm-vdo/murmurhash3.c
* tag 'for-6.9/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: restore synchronous close of device mapper block device
dm vdo murmurhash: remove unneeded semicolon
Pull vfs fixes from Christian Brauner:
"This contains a few small fixes for this merge window and the attempt
to handle the ntfs removal regression that was reported a little while
ago:
- After the removal of the legacy ntfs driver we received reports
about regressions for some people that do mount "ntfs" explicitly
and expect the driver to be available. Since ntfs3 is a drop-in for
legacy ntfs we alias legacy ntfs to ntfs3 just like ext3 is aliased
to ext4.
We also enforce legacy ntfs is always mounted read-only and give it
custom file operations to ensure that ioctl()'s can't be abused to
perform write operations.
- Fix an unbalanced module_get() in bdev_open().
- Two smaller fixes for the netfs work done earlier in this cycle.
- Fix the errno returned from the new FS_IOC_GETUUID and
FS_IOC_GETFSSYSFSPATH ioctls. Both commands just pull information
out of the superblock so there's no need to call into the actual
ioctl handlers.
So instead of returning ENOIOCTLCMD to indicate to fallback we just
return ENOTTY directly avoiding that indirection"
* tag 'vfs-6.9-rc6.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
netfs: Fix the pre-flush when appending to a file in writethrough mode
netfs: Fix writethrough-mode error handling
ntfs3: add legacy ntfs file operations
ntfs3: enforce read-only when used as legacy ntfs driver
ntfs3: serve as alias for the legacy ntfs driver
block: fix module reference leakage from bdev_open_by_dev error path
fs: Return ENOTTY directly if FS_IOC_GETUUID or FS_IOC_GETFSSYSFSPATH fail
Pull LoongArch fixes from Huacai Chen:
"Fix some build errors and some trivial runtime bugs"
* tag 'loongarch-fixes-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Lately init pmu after smp is online
LoongArch: Fix callchain parse error with kernel tracepoint events
LoongArch: Fix access error when read fault on a write-only VMA
LoongArch: Fix a build error due to __tlb_remove_tlb_entry()
LoongArch: Fix Kconfig item and left code related to CRASH_CORE
Pull maintainer entry update from Uwe Kleine-König:
"This is just an update to my maintainer entries as I will switch jobs
soon. Getting a contact email address into the MAINTAINERS file that
will work also after my switch will hopefully reduce people mailing to
the then non-existing address.
I also drop my co-maintenance for SIOX, but that continues to be in
good hands"
* tag 'pwm/for-6.9-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
MAINTAINERS: Update Uwe's email address, drop SIOX maintenance
Pull drm fixes from Dave Airlie:
"Regular weekly merge request, mostly amdgpu and misc bits in
xe/etnaviv/gma500 and some core changes. Nothing too outlandish, seems
to be about normal for this time of release.
atomic-helpers:
- Fix memory leak in drm_format_conv_state_copy()
fbdev:
- fbdefio: Fix address calculation
amdgpu:
- Suspend/resume fix
- Don't expose gpu_od directory if it's empty
- SDMA 4.4.2 fix
- VPE fix
- BO eviction fix
- UMSCH fix
- SMU 13.0.6 reset fixes
- GPUVM flush accounting fix
- SDMA 5.2 fix
- Fix possible UAF in mes code
amdkfd:
- Eviction fence handling fix
- Fix memory leak when GPU memory allocation fails
- Fix dma-buf validation
- Fix rescheduling of restore worker
- SVM fix
gma500:
- Fix crash during boot
etnaviv:
- fix GC7000 TX clock gating
- revert NPU UAPI changes
xe:
- Fix error paths on managed allocations
- Fix PF/VF relay messages"
* tag 'drm-fixes-2024-04-26' of https://gitlab.freedesktop.org/drm/kernel: (23 commits)
Revert "drm/etnaviv: Expose a few more chipspecs to userspace"
drm/etnaviv: fix tx clock gating on some GC7000 variants
drm/xe/guc: Fix arguments passed to relay G2H handlers
drm/xe: call free_gsc_pkt only once on action add failure
drm/xe: Remove sysfs only once on action add failure
fbdev: fix incorrect address computation in deferred IO
drm/amdgpu/mes: fix use-after-free issue
drm/amdgpu/sdma5.2: use legacy HDP flush for SDMA2/3
drm/amdgpu: Fix the ring buffer size for queue VM flush
drm/amdkfd: Add VRAM accounting for SVM migration
drm/amd/pm: Restore config space after reset
drm/amdgpu/umsch: don't execute umsch test when GPU is in reset/suspend
drm/amdkfd: Fix rescheduling of restore worker
drm/amdgpu: Update BO eviction priorities
drm/amdgpu/vpe: fix vpe dpm setup failed
drm/amdgpu: Assign correct bits for SDMA HDP flush
drm/amdgpu/pm: Remove gpu_od if it's an empty directory
drm/amdkfd: make sure VM is ready for updating operations
drm/amdgpu: Fix leak when GPU memory allocation fails
drm/amdkfd: Fix eviction fence handling
...
MediaTek driver fixes for v6.9
This fixes the MediaTek SVS driver to look for the right thermal zone
names, and adds a missing Kconfig dependency for mtk-socinfo.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX fixes for 6.9, round 2:
- Fix i.MX8MP the second CSI2 assigned-clock property which got wrong by
commit f78835d1e6 ("arm64: dts: imx8mp: reparent MEDIA_MIPI_PHY1_REF
to CLK_24M")
- Correct USB over-current polarity for imx6ull-tarragon board
* tag 'imx-fixes-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx6ull-tarragon: fix USB over-current polarity
arm64: dts: imx8mp: Fix assigned-clocks for second CSI2
Link: https://lore.kernel.org/r/ZioopqscxwUOwQkf@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
MediaTek ARM64 DTS fixes for v6.9
This fixes some dts validation issues against bindings for multiple SoCs,
GPU voltage constraints for Chromebook devices, missing gce-client-reg
on various nodes (performance issues) on MT8183/92/95, and also fixes
boot issues on MT8195 when SPMI is built as module.
* tag 'mtk-dts64-fixes-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
arm64: dts: mediatek: mt2712: fix validation errors
arm64: dts: mediatek: mt7986: prefix BPI-R3 cooling maps with "map-"
arm64: dts: mediatek: mt7986: drop invalid thermal block clock
arm64: dts: mediatek: mt7986: drop "#reset-cells" from Ethernet controller
arm64: dts: mediatek: mt7986: drop invalid properties from ethsys
arm64: dts: mediatek: mt7622: drop "reset-names" from thermal block
arm64: dts: mediatek: mt7622: fix ethernet controller "compatible"
arm64: dts: mediatek: mt7622: fix IR nodename
arm64: dts: mediatek: mt7622: fix clock controllers
arm64: dts: mediatek: mt8186-corsola: Update min voltage constraint for Vgpu
arm64: dts: mediatek: mt8183-kukui: Use default min voltage for MT6358
arm64: dts: mediatek: mt8195-cherry: Update min voltage constraint for MT6315
arm64: dts: mediatek: mt8192-asurada: Update min voltage constraint for MT6315
arm64: dts: mediatek: cherry: Describe CPU supplies
arm64: dts: mediatek: mt8195: Add missing gce-client-reg to mutex1
arm64: dts: mediatek: mt8195: Add missing gce-client-reg to mutex
arm64: dts: mediatek: mt8195: Add missing gce-client-reg to vpp/vdosys
arm64: dts: mediatek: mt8192: Add missing gce-client-reg to mutex
arm64: dts: mediatek: mt8183: Add power-domains properity to mfgcfg
