Condsider the following call sequence:
/* Upper layer */
dma_fence_begin_signalling();
lock(tainted_shared_lock);
/* Driver callback */
dma_fence_begin_signalling();
...
The driver might here use a utility that is annotated as intended for the
dma-fence signalling critical path. Now if the upper layer isn't correctly
annotated yet for whatever reason, resulting in
/* Upper layer */
lock(tainted_shared_lock);
/* Driver callback */
dma_fence_begin_signalling();
We will receive a false lockdep locking order violation notification from
dma_fence_begin_signalling(). However entering a dma-fence signalling
critical section itself doesn't block and could not cause a deadlock.
So use a successful read_trylock() annotation instead for
dma_fence_begin_signalling(). That will make sure that the locking order
is correctly registered in the first case, and doesn't register any
locking order in the second case.
The alternative is of course to make sure that the "Upper layer" is always
correctly annotated. But experience shows that's not easily achievable
in all cases.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428125233.228353-1-thomas.hellstrom@linux.intel.com
On RK3399 the VOPL is loaded before VOPB and get registered as crtc-0.
However, on RK3288 and PX30 VOPB is gets registered as crtc-0 instead of
VOPL.
With VOPL registered as crtc-0 the kernel kms client is not able to
enable 4K display modes for console use on RK3399.
Load VOPB before VOPL to help kernel kms client make use of 4K display
modes for console use on RK3399.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240908145511.3331451-8-jonas@kwiboo.se
The previous tables for mpll_cfg and curr_ctrl were created using the
20-pages of example settings provided by the PHY vendor. Those
example settings weren't particularly dense, so there were places
where we were guessing what the settings would be for 10-bit and
12-bit (not that we use those anyway). It was also always a lot of
extra work every time we wanted to add a new clock rate since we had
to cross-reference several tables.
In <https://crrev.com/c/285855> I've gone through the work to figure
out how to generate this table automatically. Let's now use the
automatically generated table and then we'll never need to look at it
again.
We only support 8-bit mode right now and only support a small number
of clock rates and I've verified that the only 8-bit rate that was
affected was 148.5. That mode appears to have been wrong in the old
table.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240908145511.3331451-6-jonas@kwiboo.se
Dut to the high HDMI signal voltage driver, Mickey have meet
a serious RF/EMI problem, so we decided to reduce HDMI signal
voltage to a proper value.
The default params for phy is cklvl = 20 & txlvl = 13 (RF/EMI failed)
ck: lvl = 13, term=100, vlo = 2.71, vhi=3.14, vswing = 0.43
tx: lvl = 20, term=100, vlo = 2.81, vhi=3.16, vswing = 0.35
1. We decided to reduce voltage value to lower, but VSwing still
keep high, RF/EMI have been improved but still failed.
ck: lvl = 6, term=100, vlo = 2.61, vhi=3.11, vswing = 0.50
tx: lvl = 6, term=100, vlo = 2.61, vhi=3.11, vswing = 0.50
2. We try to keep voltage value and vswing both lower, then RF/EMI
test all passed ;)
ck: lvl = 11, term= 66, vlo = 2.68, vhi=3.09, vswing = 0.40
tx: lvl = 11, term= 66, vlo = 2.68, vhi=3.09, vswing = 0.40
When we back to run HDMI different test and single-end test, we see
different test passed, but signle-end test failed. The oscilloscope
show that simgle-end clock's VL value is 1.78v (which remind LowLimit
should not lower then 2.6v).
3. That's to say there are some different between PHY document and
measure value. And according to experiment 2 results, we need to
higher clock voltage and lower data voltage, then we can keep RF/EMI
satisfied and single-end & differen test passed.
ck: lvl = 9, term=100, vlo = 2.65, vhi=3.12, vswing = 0.47
tx: lvl = 16, term=100, vlo = 2.75, vhi=3.15, vswing = 0.39
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240908145511.3331451-3-jonas@kwiboo.se
RK3228 and RK3328 clock rate is being validated against a mpll config
table intended for a Synopsys phy, and not the used inno-hdmi-phy.
Instead get a reference to the hdmiphy clk and validate rates against
it to enable use of HDMI2.0 modes, e.g. 4K@60Hz, on RK3228 and RK3328.
For Synopsis phy the max_tmds_clock validation is sufficient.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240908145511.3331451-2-jonas@kwiboo.se
sparse reports:
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:122:16: warning: incorrect type in argument 1 (different address spaces)
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:122:16: expected void const volatile [noderef] __iomem *addr
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:122:16: got unsigned int [usertype] *wa_dma_data
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:130:9: warning: incorrect type in argument 2 (different address spaces)
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:130:9: expected void volatile [noderef] __iomem *addr
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:130:9: got unsigned int [usertype] *wa_dma_data
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:414:9: warning: incorrect type in argument 1 (different address spaces)
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:414:9: expected void const volatile [noderef] __iomem *addr
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:414:9: got unsigned int *
These come from pieces of code which do essentially:
p = dma_alloc_coherent()
dma_transfer_to_p()
readl(p)
writel(x, p)
dma_transfer_from_p()
I think we would do just fine without readl() and writel(), accessing
the memory without any extras, but ensuring that the necessary barriers
are in place. But this code is for a legacy platform, has been working
for ages, and it's doing work-arounds for hardware issues, and those
hardware issues are very difficult to trigger... So I would just rather
leave the code be as it is now.
However, the warnings are not nice. Hide the warnings by a (__iomem void
*) typecast.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407311737.VsJ0Sr1w-lkp@intel.com/
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240806-omapdrm-misc-fixes-v1-2-15d31aea0831@ideasonboard.com
smatch reports:
drivers/gpu/drm/omapdrm/dss/base.c:176 omapdss_device_disconnect() error: we previously assumed 'src' could be null (see line 169)
This code is mostly from a time when omapdrm had its own display device
model. I can't honestly remember the details, and I don't think it's
worth digging in deeply into that for a legacy driver.
However, it looks like we only call omapdss_device_disconnect() and
omapdss_device_connect() with NULL as the src parameter. We can thus
drop the src parameter from both functions, and fix the smatch warning.
I don't think omapdss_device_disconnect() ever gets NULL for the dst
parameter (if it did, we'd crash soon after returning from the
function), but I have kept the !dst check, just in case, but I added a
WARN_ON() there.
Also, if the dst parameter can be NULL, we can't always get the struct
dss_device pointer from dst->dss (which is only used for a debug print).
To make sure we can't hit that issue, do it similarly to the
omapdss_device_connect() function: add 'struct dss_device *dss' as the
first parameter, so that we always have it regardless of the dst.
Fixes: 79107f274b ("drm/omap: Add support for drm_bridge")
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240806-omapdrm-misc-fixes-v1-1-15d31aea0831@ideasonboard.com
Inline ast_vga_connector_init() into its only caller. The helper
currently only does half of the connector-init work and is trivial
enough to be inlined. While at it, remove the error message from the
call to ast_ddc_create(). The function already warns on errors.
Also set the local variables for encoder and connector as late as
possible, so that the compiler warns if we use them before having
initialized the instance.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240911115347.899148-9-tzimmermann@suse.de
Inline ast_sil164_connector_init() into its only caller. The helper
currently only does half of the connector-init work and is trivial
enough to be inlined. While at it, remove the error message from the
call to ast_ddc_create(). The function already warns on errors.
Also set the local variables for encoder and connector as late as
possible, so that the compiler warns if we use them before having
initialized the instance.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240911115347.899148-8-tzimmermann@suse.de
Inline ast_dp501_connector_init() into its only caller. The helper
currently only does half of the connector-init work and is trivial
enough to be inlined.
Also set the local variables for encoder and connector as late as
possible, so that the compiler warns if we use them before having
initialized the instance.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240911115347.899148-6-tzimmermann@suse.de
Replace ast_dp_set_on_off() with ast_dp_set_enable(). The helper's
new name reflects the performed operation. If enabling fails, the
new helper prints a warning. The code that waits for the programmed
effect to take place is now located in __ast_dp_wait_enable().
Also align the register constants with the rest of the code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240911115347.899148-5-tzimmermann@suse.de
Replace the helper for controlling power on the physical connector,
ast_dp_power_on_off(), with ast_dp_set_phy_sleep(). The new name
reflects the effect of the operation. Simplify the implementation.
The call now controls sleeping, hence semantics are inversed. Each
'on' becomes an 'off' operation and vice versa.
Do the same for ast_dp_power_is_on() and also align naming of the
register constant with the rest of the code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240911115347.899148-4-tzimmermann@suse.de
Inline ast_astdp_connector_init() into its only caller. The helper
currently only does half of the connector-init work and is trivial
enough to be inlined.
Also set the local variables for encoder and connector as late as
possible, so that the compiler warns if we use them before having
initialized the instance.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240911115347.899148-2-tzimmermann@suse.de
Opt for devm_ioremap_wc() over devm_ioremap() when mapping the framebuffer.
Using devm_ioremap() results in the VA being mapped with PAT=UC-, which
considerably slows down drm_fb_memcpy(). In contrast, devm_ioremap_wc()
maps the VA with PAT set to WC, leading to better performance on platforms
where access to UC memory is much slower than WC memory.
Here's the performance data measured in a guest on the physical machine
"Sapphire Rapids XCC".
With host KVM honors guest PAT memory types, the effective memory type
for this framebuffer range is
- WC when devm_ioremap_wc() is used
- UC- when devm_ioremap() is used.
The data presented is an average from 10 execution runs.
Cycles: Avg cycles of executed bochs_primary_plane_helper_atomic_update()
from VM boot to GDM show up
Cnt: Avg cnt of executed bochs_primary_plane_helper_atomic_update()
from VM boot to GDM show up
T: Avg time of each bochs_primary_plane_helper_atomic_update().
-------------------------------------------------
| | devm_ioremap() | devm_ioremap_wc() |
|------------|----------------|-------------------|
| Cycles | 211.545M | 0.157M |
|------------|----------------|-------------------|
| Cnt | 142 | 1917 |
|------------|----------------|-------------------|
| T | 0.1748s | 0.0004s |
-------------------------------------------------
Note:
Following the rebase to [3], the previously reported GDM failure on the
VGA device [1] can no longer be reproduced, thanks to the memory management
improvements made in [2]. Despite this, I have proceeded to submit this
patch because of the noticeable performance improvements it provides.
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Closes: https://lore.kernel.org/all/87jzfutmfc.fsf@redhat.com/#t
Cc: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/all/87jzfutmfc.fsf@redhat.com/#t [1]
Link: https://patchwork.freedesktop.org/series/138086 [2]
Link: https://gitlab.freedesktop.org/drm/misc/kernel/-/tree/drm-misc-next [3]
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240909131643.28915-1-yan.y.zhao@intel.com
Add three KUnit test cases for the drm_framebuffer_init function:
1. Test if expected values are being set after drm_framebuffer_init() call.
2. Try to init a framebuffer without setting its format.
3. Try calling drm_framebuffer_init() with mismatch of the drm_device
passed at the first argument and the one pointed by fb->dev.
Signed-off-by: Carlos Eduardo Gallo Filho <gcarlos@disroot.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240911001559.28284-9-gcarlos@disroot.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
