With the Cypress CCGx Type-C controller the following error is
sometimes observed on boot:
[ 16.087147] ucsi_ccg 1-0008: failed to reset PPM!
[ 16.087319] ucsi_ccg 1-0008: PPM init failed (-110)
When the above timeout occurs the following happens:
1. The function ucsi_reset_ppm() is called to reset UCSI controller.
This function performs an async write to start reset and then
polls for completion.
2. An interrupt occurs when the reset completes. In the interrupt
handler, the OPM field in the INTR_REG is cleared and this clears
the CCI data in the PPM. Hence, the reset completion status is
cleared.
3. The function ucsi_reset_ppm() continues to poll for the reset
completion, but has missed the reset completion event and
eventually timeouts.
In this patch, we store CCI when handling the interrupt and make
reading after async write gets the correct value.
To align with the CCGx UCSI interface guide, this patch updates the
driver to copy CCI and MESSAGE_IN before they are reset when UCSI
interrupt acknowledged.
When a new command is sent, the driver will clear the old CCI to avoid
ucsi_ccg_read() getting wrong CCI after ucsi_ccg_async_write() when
the UCSI interrupt is not handled.
Finally, acking the UCSI_READ_INT interrupt before calling complete()
in ISR to ensure that the ucsi_ccg_sync_write() would wait for the
interrupt handling to complete.
Signed-off-by: Sing-Han Chen <singhanc@nvidia.com>
Signed-off-by: Haotien Hsu <haotienh@nvidia.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240126030115.3791554-1-haotienh@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use of_reset_control_array_get_optional_exclusive() instead, it is
implemented as:
static inline struct reset_control *
of_reset_control_array_get_optional_exclusive(struct device_node *node)
{
return of_reset_control_array_get(node, false, true, true);
}
This makes the code easier to understand and removes the last remaining
direct use of of_reset_control_array_get(). No functional changes.
This change was made possible by commit f4cc91ddd8 ("usb: dwc3:
of-simple: remove Amlogic GXL and AXG compatibles"), which made the
parameters passed to of_reset_control_array_get() constant.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20240125-dwc3-of-simple-reset-control-array-fix-v2-1-1ab6b52cad21@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In sddr55_{read|write}_data(), the address variables are needlessly typed
as *unsigned long* -- which is 32-bit type on the 32-bit arches and 64-bit
type on the 64-bit arches; those variables' value should fit into just 3
command bytes and consists of 10-bit block # (or at least the max block #
seems to be 1023) and 4-/5-bit page # within a block, so 32-bit *unsigned*
*int* type should be more than enough...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
[Sergey: rewrote the patch subject/description]
Signed-off-by: Karina Yankevich <k.yankevich@omp.ru>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/4c9485f2-0bfc-591b-bfe7-2059289b554e@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull more bcachefs updates from Kent Overstreet:
"Some fixes, Some refactoring, some minor features:
- Assorted prep work for disk space accounting rewrite
- BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this
makes our trigger context more explicit
- A few fixes to avoid excessive transaction restarts on
multithreaded workloads: fstests (in addition to ktest tests) are
now checking slowpath counters, and that's shaking out a few bugs
- Assorted tracepoint improvements
- Starting to break up bcachefs_format.h and move on disk types so
they're with the code they belong to; this will make room to start
documenting the on disk format better.
- A few minor fixes"
* tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits)
bcachefs: Improve inode_to_text()
bcachefs: logged_ops_format.h
bcachefs: reflink_format.h
bcachefs; extents_format.h
bcachefs: ec_format.h
bcachefs: subvolume_format.h
bcachefs: snapshot_format.h
bcachefs: alloc_background_format.h
bcachefs: xattr_format.h
bcachefs: dirent_format.h
bcachefs: inode_format.h
bcachefs; quota_format.h
bcachefs: sb-counters_format.h
bcachefs: counters.c -> sb-counters.c
bcachefs: comment bch_subvolume
bcachefs: bch_snapshot::btime
bcachefs: add missing __GFP_NOWARN
bcachefs: opts->compression can now also be applied in the background
bcachefs: Prep work for variable size btree node buffers
bcachefs: grab s_umount only if snapshotting
...
Pull timer updates from Thomas Gleixner:
"Updates for time and clocksources:
- A fix for the idle and iowait time accounting vs CPU hotplug.
The time is reset on CPU hotplug which makes the accumulated
systemwide time jump backwards.
- Assorted fixes and improvements for clocksource/event drivers"
* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
clocksource/drivers/ep93xx: Fix error handling during probe
clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
clocksource/timer-riscv: Add riscv_clock_shutdown callback
dt-bindings: timer: Add StarFive JH8100 clint
dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs
Pull powerpc fixes from Aneesh Kumar:
- Increase default stack size to 32KB for Book3S
Thanks to Michael Ellerman.
* tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Increase default stack size to 32KB
Add a field to bch_snapshot for creation time; this will be important
when we start exposing the snapshot tree to userspace.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The "apply this compression method in the background" paths now use the
compression option if background_compression is not set; this means that
setting or changing the compression option will cause existing data to
be compressed accordingly in the background.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bcachefs btree nodes are big - typically 256k - and btree roots are
pinned in memory. As we're now up to 18 btrees, we now have significant
memory overhead in mostly empty btree roots.
And in the future we're going to start enforcing that certain btree node
boundaries exist, to solve lock contention issues - analagous to XFS's
AGIs.
Thus, we need to start allocating smaller btree node buffers when we
can. This patch changes code that refers to the filesystem constant
c->opts.btree_node_size to refer to the btree node buffer size -
btree_buf_bytes() - where appropriate.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The variable tmp is being assigned a value but it isn't being
read afterwards. The assignment is redundant and so tmp can be
removed.
Cleans up clang scan build warning:
warning: Although the value stored to 'ret' is used in the enclosing
expression, the value is never actually read from 'ret'
[deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
drop_locks_do() should not be used in a fastpath without first trying
the do in nonblocking mode - the unlock and relock will cause excessive
transaction restarts and potentially livelocking with other threads that
are contending for the same locks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Factor out bch2_journal_bufs_to_text(), and use it in the
journal_entry_full() tracepoint; when we can't get a journal reservation
we need to know the outstanding journal entry sizes to know if the
problem is due to excessive flushing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When issuing discards, we may need to flush the journal if there's too
many buckets that can't be discarded until a journal flush.
But the heuristic was bad; we should be comparing the number of buckets
that need to flushes against the number of free buckets, not the number
of buckets we saw.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Also print out the data_opts, so that we can see what specifically is
being done to an extent.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This fixes a bug with rebalance IOs getting stuck with reads completed,
but writes never being issued.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Drop t he loop in bch2_kthread_io_clock_wait(): this allows the code
that uses it to be woken up for other reasons, and fixes a bug where
rebalance wouldn't wake up when a scan was requested.
This raises the possibility of spurious wakeups, but callers should
always be able to handle that reasonably well.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Pull header fix from Kent Overstreet:
"Just one small fixup for the RT build"
* tag 'header_cleanup-2024-01-20' of https://evilpiepirate.org/git/bcachefs:
spinlock: Fix failing build for PREEMPT_RT
