Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260306085144.12064-4-johan@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260306085144.12064-2-johan@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Remove unused structures bss_bias_info and bss_bias, and member
bss in struct roam_ctrl_cmd.
After these changes, the size of struct roam_ctrl_cmd, along
with its member's offsets remain the same, hence the memory layout
doesn't change:
Before changes:
struct roam_ctrl_cmd {
union {
u8 bssid[6]; /* 0 6 */
u8 roam_mode; /* 0 1 */
struct bss_bias_info bss; /* 0 1 */
struct low_rssi_scan_params params; /* 0 8 */
} info; /* 0 8 */
u8 roam_ctrl; /* 8 1 */
/* size: 9, cachelines: 1, members: 2 */
/* last cacheline: 9 bytes */
} __attribute__((__packed__));
After changes:
struct roam_ctrl_cmd {
union {
u8 bssid[6]; /* 0 6 */
u8 roam_mode; /* 0 1 */
struct low_rssi_scan_params params; /* 0 8 */
} info; /* 0 8 */
u8 roam_ctrl; /* 8 1 */
/* size: 9, cachelines: 1, members: 2 */
/* last cacheline: 9 bytes */
} __attribute__((__packed__));
With these changes fix the following warning:
drivers/net/wireless/ath/ath6kl/wmi.h:1658:20: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/aZ0tGZnmtGckKJzY@kspp
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
The current implementation incorrectly reports legacy CCK and OFDM rates
in monitor mode radiotap headers. The rate field displays wrong values,
for example showing 11 Mbps when the actual rate is 1 Mbps. This occurs
because the HAL layer uses a unified enum for both CCK and OFDM rates
without distinguishing between long/short preamble variants and proper
rate mapping to hardware rate indices.
The root cause is threefold:
1. The hal_rx_legacy_rate enum conflates CCK and OFDM rates into a
single enumeration, making it impossible to differentiate between
802.11b CCK rates (with long/short preamble variants) and 802.11a/g
OFDM rates.
2. The L-SIG-B parsing function maps hardware rate values to the wrong
enum values. For CCK rates, it incorrectly combines long and short
preamble cases (e.g., cases 2 and 5 both map to 2 Mbps), losing
preamble information critical for proper rate identification.
3. The mac layer's rate-to-index conversion function does not properly
handle the precedence between long preamble, short preamble, and
OFDM rates when matching hardware rate values.
Split the hal_rx_legacy_rate enum into two separate enumerations:
hal_rx_legacy_rate for CCK rates with explicit long preamble (LP) and
short preamble (SP) variants, and hal_rx_legacy_rates_ofdm for OFDM
rates. This separation allows proper identification of rate types and
preamble modes.
Introduce a new mapping ath12k_wifi7_hal_mon_map_legacy_rate_to_hw_rate()
that converts HAL CCK rate enums to hardware rate indices defined in
ath12k_hw_rate_cck. This ensures the rate field in ppdu_info contains
the correct hardware rate index that matches the mac layer's expectations.
Update the L-SIG-B parsing to map each hardware rate value (1-7) to its
corresponding CCK rate enum with proper preamble designation:
- Cases 1-4: Long preamble (1, 2, 5.5, 11 Mbps)
- Cases 5-7: Short preamble (2, 5.5, 11 Mbps)
Update the L-SIG-A parsing to use the new OFDM-specific enum values,
maintaining the existing rate mapping for 802.11a/g OFDM rates.
Refactor the mac layer's ath12k_mac_hw_rate_to_idx() function to
implement proper matching precedence:
1. First match OFDM rates using the IEEE80211_RATE_MANDATORY_A flag
2. Then match CCK short preamble rates
3. Finally match CCK long preamble rates as fallback
Add helper macros ATH12K_MAC_RATE_A_M and ATH12K_MAC_RATE_B to improve
readability of the rate table initialization and ensure the mandatory
flag is set for OFDM rates.
This fix ensures monitor mode captures display accurate rate information
in the radiotap header, correctly distinguishing between 1 Mbps and
11 Mbps, and properly identifying preamble types for CCK rates.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01181-QCAHKSWPL_SILICONZ-1
Fixes: d889913205 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com>
Signed-off-by: Thiraviyam Mariyappan <thiraviyam.mariyappan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260209054924.2713072-1-thiraviyam.mariyappan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Per-link logical index is assigned from the global counter,
ahsta->num_peer. This logical index is sent to firmware during peer
association. If there is a failure in creating a link station,
ath12k_mac_free_unassign_link_sta() clears the link, but does not decrement
the logical link index. This will result in a higher logical link index for
the next link station created. Also, if there is a leak in logical link
index as we assign the incremented num_peer, then the index can exceed the
maximum valid value of 15.
As an example, let's say we have a 2 GHz + 5 GHz + 6 GHz MLO setup. So the
logical link indices that they have are 0, 1 and 2, respectively. If the
5 GHz link is removed, logical link index 1 becomes available, and num_peer
is not reduced to 2 and still remains at 3. If a new 5 GHz link is added
later, it gets the index 3, instead of reusing link index 1. Also,
num_peer is increased to 4, though only 3 links are present.
To resolve these, create a bitmap, free_logical_link_idx, that tracks the
available logical link indices. When a link station is created, select the
first free logical index and when a link station is removed, mark its
logical link index as available by setting the bit.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01181-QCAHKSWPL_SILICONZ-1
Signed-off-by: Manish Dharanenthiran <manish.dharanenthiran@oss.qualcomm.com>
Signed-off-by: Roopni Devanathan <roopni.devanathan@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260226041911.2434999-1-roopni.devanathan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
The fields tx_retry_failed, tx_retry_count, and tx_duration are
currently updated outside the HTT_PPDU_STATS_TAG_USR_COMPLTN_ACK_BA_STATUS
flag check. In certain scenarios, firmware delivers multiple PPDU
statistics for the same PPDU, first without BA/ACK information, and
later with BA/ACK status once it becomes available. As the same PPDU
is processed again, these counters are updated a second time,
resulting in duplicate TX statistics.
To address this, move the accounting of tx_retry_failed and
tx_retry_count under the ACK/BA status flag check, and similarly gate
tx_duration on the same path. This ensures that each PPDU contributes
to these counters exactly once, avoids double counting, and provides
consistent reporting in userspace tools such as station dump.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01243-QCAHKSWPL_SILICONZ-1
Fixes: a0b963e1da ("wifi: ath12k: fetch tx_retry and tx_failed from htt_ppdu_stats_user_cmpltn_common_tlv")
Signed-off-by: Sarika Sharma <sarika.sharma@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260226051947.1379716-1-sarika.sharma@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Add UHR Operation and Capability definitions and parsing helpers:
- Define ieee80211_uhr_dps_info, ieee80211_uhr_dbe_info,
ieee80211_uhr_p_edca_info with masks.
- Update ieee80211_uhr_oper_size_ok() to account for optional
DPS/DBE/P-EDCA blocks.
- Move NPCA pointer position after DPS Operation Parameter if it is
present in ieee80211_uhr_oper_size_ok().
- Move NPCA pointer position after DPS info if it is present in
ieee80211_uhr_npca_info().
Signed-off-by: Karthikeyan Kathirvel <karthikeyan.kathirvel@oss.qualcomm.com>
Link: https://patch.msgid.link/20260304085343.1093993-2-karthikeyan.kathirvel@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Jeff Johnson says:
==================
ath.git patches for v7.1 (PR #1)
For ath12k:
Add basic hwmon temperature reporting.
Enable monitor mode on IPQ5332.
Also a few small cleanups and bug fixes across ath drivers.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During recovery of an MLO setup from a core reset,
ATH12K_GROUP_FLAG_REGISTERED is set because ath12k_mac_unregister is not
called during core reset. So, when an MLO setup is recovering from a core
reset, ath12k_core_mlo_setup() is skipped. Hence, the firmware will not
have information about partner links. This makes MLO association fail
after recovery.
To resolve this, call ath12k_core_mlo_setup() during recovery, to set up
MLO. Also, if MLO setup fails during recovery, call
ath12k_mac_unregister() and ath12k_mac_destroy() to unregister mac and
then tear down the mac structures.
Also, initiate MLO teardown in the hardware group stop sequence to align
with the hardware group start sequence.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01181-QCAHKSWPL_SILICONZ-1
Signed-off-by: Ramya Gnanasekar <ramya.gnanasekar@oss.qualcomm.com>
Signed-off-by: Roopni Devanathan <roopni.devanathan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260227041127.3265879-1-roopni.devanathan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Advertise support for IEEE 802.1X authentication protocol directly from
mac80211, without depending on driver indication of (Re)Association
frame encryption capability.
As specified in "IEEE P802.11bi/D4.0, clauses 12.16.5 and 12.16.8.2",
IEEE 802.1X authentication can operate with or without (Re)Association
frame encryption support. Therefore, mac80211 can safely advertise
802.1X support independently of driver capabilities.
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Link: https://patch.msgid.link/20260226185553.1516290-6-kavita.kavita@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for the IEEE 802.1X authentication protocol in non-AP STA
mode, as specified in "IEEE P802.11bi/D4.0, 12.16.5".
IEEE 802.1X authentication involves multiple Authentication frame
exchanges, with the non-AP STA and AP alternating transaction
sequence numbers. The number of Authentication frame exchanges
depends on the EAP method in use. For IEEE 802.1X authentication,
process only Authentication frames with the expected transaction
sequence number.
For IEEE 802.1X Authentication, Table 9-71 specifies that the
Encapsulation Length field as specified in Clause 9.4.1.82 shall be
present in all IEEE 802.1X Authentication frames. Drop the frame in
the mac80211 if the Encapsulation Length field is missing.
After receiving the final Authentication frame with status code
WLAN_STATUS_8021X_AUTH_SUCCESS from the AP, mac80211 marks the state
as authenticated, as it indicates the EAP handshake has completed
successfully over the Authentication frames as specified in
Clause 12.16.5.
In the PMKSA caching case, only two Authentication frames are
exchanged if the AP identifies a valid PMKSA, then as specified
in Clause 12.16.8.3, the AP shall set the Status Code to
WLAN_STATUS_SUCCESS in the final Authentication frame and must not
include an encapsulated EAPOL PDU. This frame will be the final
Authentication frame from the AP when PMKSA caching is enabled,
and mac80211 marks the state as authenticated.
In case of authentication success or failure, forward the
Authentication frame to userspace(e.g. wpa_supplicant), and let
userspace validate the Authentication frame from the AP as per the
specification.
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Link: https://patch.msgid.link/20260226185553.1516290-5-kavita.kavita@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add an extended feature flag NL80211_EXT_FEATURE_IEEE8021X_AUTH to
allow a driver to indicate support for the IEEE 802.1X authentication
protocol in non-AP STA mode, as defined in
"IEEE P802.11bi/D4.0, 12.16.5".
In case of SME in userspace, the Authentication frame body is prepared
in userspace while the driver finalizes the Authentication frame once
it receives the required fields and elements. The driver indicates
support for IEEE 802.1X authentication using the extended feature flag
so that userspace can initiate IEEE 802.1X authentication.
When the feature flag is set, process IEEE 802.1X Authentication frames
from userspace in non-AP STA mode. If the flag is not set, reject
IEEE 802.1X Authentication frames.
Define a new authentication type NL80211_AUTHTYPE_IEEE8021X for
IEEE 802.1X authentication.
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Link: https://patch.msgid.link/20260226185553.1516290-4-kavita.kavita@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Per IEEE Std 802.11be-2024, 12.5.2.3.3, if the MPDU is an
individually addressed Data frame between an AP MLD and a
non-AP MLD associated with the AP MLD, then A1/A2/A3
will be MLD MAC addresses. Otherwise, Al/A2/A3 will be
over-the-air link MAC addresses.
Currently, during AAD and Nonce computation for software based
encryption/decryption cases, mac80211 directly uses the addresses it
receives in the skb frame header. However, after the first
authentication, management frame addresses for non-AP MLD stations
are translated to MLD addresses from over the air link addresses in
software. This means that the skb header could contain translated MLD
addresses, which when used as is, can lead to incorrect AAD/Nonce
computation.
In the following manner, ensure that the right set of addresses are used:
In the receive path, stash the pre-translated link addresses in
ieee80211_rx_data and use them for the AAD/Nonce computations
when required.
In the transmit path, offload the encryption for a CCMP/GCMP key
to the hwsim driver that can then ensure that encryption and hence
the AAD/Nonce computations are performed on the frame containing the
right set of addresses, i.e, MLD addresses if unicast data frame and
link addresses otherwise.
To do so, register the set key handler in hwsim driver so mac80211 is
aware that it is the driver that would take care of encrypting the
frame. Offload encryption for a CCMP/GCMP key, while keeping the
encryption for WEP/TKIP and MMIE generation for a AES_CMAC or a
AES_GMAC key still at the SW crypto in mac layer
Co-developed-by: Rohan Dutta <quic_drohan@quicinc.com>
Signed-off-by: Rohan Dutta <quic_drohan@quicinc.com>
Signed-off-by: Sai Pratyusha Magam <sai.magam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260226042959.3766157-1-sai.magam@oss.qualcomm.com
[only store and apply link_addrs for unicast non-data
rather storing always and applying for !unicast_data]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, the unsolicited probe response template is always fetched from
the default link of a virtual interface in both Multi-Link Operation (MLO)
and non-MLO cases. However, in the MLO case there is a need to fetch the
unsolicited probe response template from a specific link instead of the
default link.
Hence, add support for fetching the unsolicited probe response template
based on the link ID from the corresponding link data.
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Co-developed-by: Raj Kumar Bhagat <raj.bhagat@oss.qualcomm.com>
Signed-off-by: Raj Kumar Bhagat <raj.bhagat@oss.qualcomm.com>
Link: https://patch.msgid.link/20260220-fils-prob-by-link-v1-2-a2746a853f75@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The sequence of operations that needs to be done in wiphy_suspend is
identical for the case where there is no wowlan configured, and for the
case that it is but the driver refused to do wowlan (by returning 1 from
rdev_suspend).
The current code duplicates this set of operations for each one of the
cases.
In particular, next patch will change the locking of cfg80211_leave_all to
not hold the wiphy lock, which will be easier to do if it is not called
twice.
Change the code to handle first the case that wowlan is configured, and
then handle both cases (driver refused to do wowlan and no wowlan
configured) in one place.
Note that this changes the behaviour to set suspended=true also when
we were not registered yet, but that makes sense anyway, as wiphy works
can be queued also before registration.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260108102921.00336669ac32.Id76f272662e1315cd93a628808cc2d1625036b00@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219094725.3846371-2-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Move the conflicting declarations (which in a couple of cases happen
to be in a union, so the entire unions are moved) to the end of the
corresponding structures, struct il_frame, and struct il3945_frame.
Notice that `struct il_tx_beacon_cmd`, `struct il4965_tx_resp`, and
`struct il3945_tx_beacon_cmd` are flexible structures, this is
structures that contain a flexible-array member.
The case for struct il4965_beacon_notif is different. Since this
structure is defined by hardware, we create the new `struct
il4965_tx_resp_hdr` type. We then use this newly created type to
replace the object type causing trouble in struct il4965_beacon_notif,
namely `struct il4965_tx_resp`.
Also, once -fms-extensions is enabled, we can use transparent struct
members in struct il4965_tx_resp.
Notice that the newly created type does not contain the flex-array
member `agg_status`, which is the object causing the -Wfamnae warnings.
This object is currently in a union along with `__le32 status`, so
anything using struct il4965_beacon_notif needs to have its own view
of `status`. To preserve the memory layout, we therefore add member
`__le32 beacon_tx_status` to struct il4965_beacon_notif.
After these changes, the size of struct il4965_beacon_notif along
with its member's offsets remain the same, hence the memory layout
doesn't change:
Before changes:
struct il4965_beacon_notif {
struct il4965_tx_resp beacon_notify_hdr; /* 0 24 */
__le32 low_tsf; /* 24 4 */
__le32 high_tsf; /* 28 4 */
__le32 ibss_mgr_status; /* 32 4 */
/* size: 36, cachelines: 1, members: 4 */
/* last cacheline: 36 bytes */
};
After changes:
struct il4965_beacon_notif {
struct il4965_tx_resp_hdr beacon_notify_hdr; /* 0 20 */
__le32 beacon_tx_status; /* 20 4 */
__le32 low_tsf; /* 24 4 */
__le32 high_tsf; /* 28 4 */
__le32 ibss_mgr_status; /* 32 4 */
/* size: 36, cachelines: 1, members: 5 */
/* last cacheline: 36 bytes */
};
Lastly, adjust the rest of the code, accordingly.
With these changes fix the following warnings:
11 drivers/net/wireless/intel/iwlegacy/common.h:526:11: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
11 drivers/net/wireless/intel/iwlegacy/commands.h:2667:31: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
4 drivers/net/wireless/intel/iwlegacy/3945.h:131:11: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/aZLienEatf9KC6Rx@kspp
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, when sending a NULL frame to probe a station, the band
information is derived from the chanctx_conf in the mac80211 vif's
bss_conf. However, for AP MLD, chanctx_conf is not assigned to the
vif's bss_conf; instead it is assigned on a per-link basis. As a result,
for AP MLD, sending a NULL packet to probe will trigger a warning.
WARNING: net/mac80211/cfg.c:4635 at ieee80211_probe_client+0x1a8/0x1d8 [mac80211], CPU#2: hostapd/244
Call trace:
ieee80211_probe_client+0x1a8/0x1d8 [mac80211] (P)
nl80211_probe_client+0xac/0x170 [cfg80211]
genl_family_rcv_msg_doit+0xc8/0x134
genl_rcv_msg+0x200/0x280
netlink_rcv_skb+0x38/0xf0
genl_rcv+0x34/0x48
netlink_unicast+0x314/0x3a0
netlink_sendmsg+0x150/0x390
____sys_sendmsg+0x1f4/0x21c
___sys_sendmsg+0x98/0xc0
__sys_sendmsg+0x74/0xcc
__arm64_sys_sendmsg+0x20/0x34
invoke_syscall.constprop.0+0x4c/0xd0
do_el0_svc+0x3c/0xd0
el0_svc+0x28/0xc0
el0t_64_sync_handler+0x98/0xdc
el0t_64_sync+0x154/0x158
---[ end trace 0000000000000000 ]---
For NULL packets sent to probe stations, set the band information only
for non-MLD, since MLD transmissions does not rely on band.
Signed-off-by: Suraj P Kizhakkethil <suraj.kizhakkethil@oss.qualcomm.com>
Link: https://patch.msgid.link/20260213100126.1414398-2-suraj.kizhakkethil@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The mwifiex_adapter_cleanup() function uses timer_delete()
(non-synchronous) for the wakeup_timer before the adapter structure is
freed. This is incorrect because timer_delete() does not wait for any
running timer callback to complete.
If the wakeup_timer callback (wakeup_timer_fn) is executing when
mwifiex_adapter_cleanup() is called, the callback will continue to
access adapter fields (adapter->hw_status, adapter->if_ops.card_reset,
etc.) which may be freed by mwifiex_free_adapter() called later in the
mwifiex_remove_card() path.
Use timer_delete_sync() instead to ensure any running timer callback has
completed before returning.
Fixes: 4636187da6 ("mwifiex: add wakeup timer based recovery mechanism")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Hodges <git@danielhodges.dev>
Link: https://patch.msgid.link/20260206194401.2346-1-git@danielhodges.dev
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fix:
- Send CAC_ABORT event when background CAC is canceled
- Cancel CAC done workqueue when radar is detected
- Release background wdev ownership when CAC is aborted or passed
- Clean lower layer background radar state when CAC is aborted or passed
- Prevent sending abort event when radar event is sent
Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
Link: https://patch.msgid.link/20260206171830.553879-2-janusz.dziedzic@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In mwifiex_11n_aggregate_pkt(), skb_aggr is allocated via
mwifiex_alloc_dma_align_buf(). If mwifiex_is_ralist_valid() returns false,
the function currently returns -1 immediately without freeing the
previously allocated skb_aggr, causing a memory leak.
Since skb_aggr has not yet been queued via skb_queue_tail(), no other
references to this memory exist. Therefore, it has to be freed locally
before returning the error.
Fix this by calling mwifiex_write_data_complete() to free skb_aggr before
returning the error status.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: 5e6e3a92b9 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Jeff Chen <jeff.chen_1@nxp.com>
Link: https://patch.msgid.link/20260119092625.1349934-1-zilin@seu.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The functions ath11k_mac_setup_bcn_tmpl_ema() and
ath11k_mac_setup_bcn_tmpl_mbssid() allocate memory for beacon templates
but fail to free it when parameter setup returns an error.
Since beacon templates must be released during normal execution, they
must also be released in the error handling paths to prevent memory
leaks.
Fix this by using unified exit paths with proper cleanup in the respective
error paths.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: 3a415daa3e ("wifi: ath11k: add P2P IE in beacon template")
Fixes: 335a92765d ("wifi: ath11k: MBSSID beacon support")
Suggested-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260130084451.110768-1-zilin@seu.edu.cn
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Add initial thermal support by wiring up a per-radio (pdev) hwmon temperature
sensor backed by the existing WMI pdev temperature command and event.
When userspace reads the sysfs file temp1_input, the driver sends
WMI_PDEV_GET_TEMPERATURE_CMDID (tag WMI_TAG_PDEV_GET_TEMPERATURE_CMD) and waits
for the corresponding WMI_PDEV_TEMPERATURE_EVENTID
(tag WMI_TAG_PDEV_TEMPERATURE_EVENT) to get the temperature and pdev_id.
Export the reported value in millidegrees Celsius as required by hwmon.
The temperature reported is per-radio (pdev). In a multi-radio wiphy under a
single phy, a separate hwmon device is created for each radio.
Sample command and output:
$ cat /sys/devices/pci0000:00/.../ieee80211/phyX/hwmonY/temp1_input
$ 50000
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01243-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Co-developed-by: Aishwarya R <aishwarya.r@oss.qualcomm.com>
Signed-off-by: Aishwarya R <aishwarya.r@oss.qualcomm.com>
Signed-off-by: Maharaja Kennadyrajan <maharaja.kennadyrajan@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260223132622.43464-1-maharaja.kennadyrajan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
This only worked by chance, because all callers of this macro used the
same identifiers that were expected by the macro.
$ grep -rn ath_for_each_chanctx
drivers/net/wireless/ath/ath9k/main.c:1576: ath_for_each_chanctx(sc, ctx)
drivers/net/wireless/ath/ath9k/main.c:2554: ath_for_each_chanctx(sc, ctx) {
drivers/net/wireless/ath/ath9k/channel.c:165: ath_for_each_chanctx(sc, ctx) {
drivers/net/wireless/ath/ath9k/channel.c:291: ath_for_each_chanctx(sc, ctx) {
drivers/net/wireless/ath/ath9k/channel.c:861: ath_for_each_chanctx(sc, ctx) {
drivers/net/wireless/ath/ath9k/debug.c:717: ath_for_each_chanctx(sc, ctx) {
drivers/net/wireless/ath/ath9k/ath9k.h:446:#define ath_for_each_chanctx(_sc, _ctx) \
Cc: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Cc: John W. Linville <linville@tuxdriver.com>
Cc: Toke Høiland-Jørgensen <toke@toke.dk>
Cc: <stable+noautosel@kernel.org> # the code worked by chance
Fixes: c4dc0d040e ("ath9k: Fetch appropriate operating channel context")
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/6ab107cf786f9d05dc4d84ea4e2d1b219ce108c0.1766355822.git.alx@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Cross-merge networking fixes after downstream PR (net-7.0-rc2).
Conflicts:
tools/testing/selftests/drivers/net/hw/rss_ctx.py
19c3a2a81d ("selftests: drv-net: rss: Generate unique ports for RSS context tests")
ce5a0f4612 ("selftests: drv-net: rss_ctx: test RSS contexts persist after ifdown/up")
include/net/inet_connection_sock.h
858d2a4f67 ("tcp: fix potential race in tcp_v6_syn_recv_sock()")
fcd3d039fa ("tcp: make tcp_v{4,6}_send_check() static")
https://lore.kernel.org/aZ8PSFLzBrEU3I89@sirena.org.uk
drivers/net/ethernet/mellanox/mlx5/core/en/xsk/setup.c
drivers/net/ethernet/mellanox/mlx5/core/en/xsk/pool.c
69050f8d6d ("treewide: Replace kmalloc with kmalloc_obj for non-scalar types")
bf4afc53b7 ("Convert 'alloc_obj' family to use the new default GFP_KERNEL argument")
8a96b9144f ("net/mlx5e: Alloc xsk channel param out of mlx5e_open_xsk()")
Adjacent changes:
net/netfilter/ipvs/ip_vs_ctl.c
c59bd9e62e ("ipvs: use more counters to avoid service lookups")
bf4afc53b7 ("Convert 'alloc_obj' family to use the new default GFP_KERNEL argument")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Paolo Abeni:
"Including fixes from IPsec, Bluetooth and netfilter
Current release - regressions:
- wifi: fix dev_alloc_name() return value check
- rds: fix recursive lock in rds_tcp_conn_slots_available
Current release - new code bugs:
- vsock: lock down child_ns_mode as write-once
Previous releases - regressions:
- core:
- do not pass flow_id to set_rps_cpu()
- consume xmit errors of GSO frames
- netconsole: avoid OOB reads, msg is not nul-terminated
- netfilter: h323: fix OOB read in decode_choice()
- tcp: re-enable acceptance of FIN packets when RWIN is 0
- udplite: fix null-ptr-deref in __udp_enqueue_schedule_skb().
- wifi: brcmfmac: fix potential kernel oops when probe fails
- phy: register phy led_triggers during probe to avoid AB-BA deadlock
- eth:
- bnxt_en: fix deleting of Ntuple filters
- wan: farsync: fix use-after-free bugs caused by unfinished tasklets
- xscale: check for PTP support properly
Previous releases - always broken:
- tcp: fix potential race in tcp_v6_syn_recv_sock()
- kcm: fix zero-frag skb in frag_list on partial sendmsg error
- xfrm:
- fix race condition in espintcp_close()
- always flush state and policy upon NETDEV_UNREGISTER event
- bluetooth:
- purge error queues in socket destructors
- fix response to L2CAP_ECRED_CONN_REQ
- eth:
- mlx5:
- fix circular locking dependency in dump
- fix "scheduling while atomic" in IPsec MAC address query
- gve: fix incorrect buffer cleanup for QPL
- team: avoid NETDEV_CHANGEMTU event when unregistering slave
- usb: validate USB endpoints"
* tag 'net-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
netfilter: nf_conntrack_h323: fix OOB read in decode_choice()
dpaa2-switch: validate num_ifs to prevent out-of-bounds write
net: consume xmit errors of GSO frames
vsock: document write-once behavior of the child_ns_mode sysctl
vsock: lock down child_ns_mode as write-once
selftests/vsock: change tests to respect write-once child ns mode
net/mlx5e: Fix "scheduling while atomic" in IPsec MAC address query
net/mlx5: Fix missing devlink lock in SRIOV enable error path
net/mlx5: E-switch, Clear legacy flag when moving to switchdev
net/mlx5: LAG, disable MPESW in lag_disable_change()
net/mlx5: DR, Fix circular locking dependency in dump
selftests: team: Add a reference count leak test
team: avoid NETDEV_CHANGEMTU event when unregistering slave
net: mana: Fix double destroy_workqueue on service rescan PCI path
MAINTAINERS: Update maintainer entry for QUALCOMM ETHQOS ETHERNET DRIVER
dpll: zl3073x: Remove redundant cleanup in devm_dpll_init()
selftests/net: packetdrill: Verify acceptance of FIN packets when RWIN is 0
tcp: re-enable acceptance of FIN packets when RWIN is 0
vsock: Use container_of() to get net namespace in sysctl handlers
net: usb: kaweth: validate USB endpoints
...
In decode_choice(), the boundary check before get_len() uses the
variable `len`, which is still 0 from its initialization at the top of
the function:
unsigned int type, ext, len = 0;
...
if (ext || (son->attr & OPEN)) {
BYTE_ALIGN(bs);
if (nf_h323_error_boundary(bs, len, 0)) /* len is 0 here */
return H323_ERROR_BOUND;
len = get_len(bs); /* OOB read */
When the bitstream is exactly consumed (bs->cur == bs->end), the check
nf_h323_error_boundary(bs, 0, 0) evaluates to (bs->cur + 0 > bs->end),
which is false. The subsequent get_len() call then dereferences
*bs->cur++, reading 1 byte past the end of the buffer. If that byte
has bit 7 set, get_len() reads a second byte as well.
This can be triggered remotely by sending a crafted Q.931 SETUP message
with a User-User Information Element containing exactly 2 bytes of
PER-encoded data ({0x08, 0x00}) to port 1720 through a firewall with
the nf_conntrack_h323 helper active. The decoder fully consumes the
PER buffer before reaching this code path, resulting in a 1-2 byte
heap-buffer-overflow read confirmed by AddressSanitizer.
Fix this by checking for 2 bytes (the maximum that get_len() may read)
instead of the uninitialized `len`. This matches the pattern used at
every other get_len() call site in the same file, where the caller
checks for 2 bytes of available data before calling get_len().
Fixes: ec8a8f3c31 ("netfilter: nf_ct_h323: Extend nf_h323_error_boundary to work on bits as well")
Signed-off-by: Vahagn Vardanian <vahagn@redrays.io>
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20260225130619.1248-2-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The driver obtains sw_attr.num_ifs from firmware via dpsw_get_attributes()
but never validates it against DPSW_MAX_IF (64). This value controls
iteration in dpaa2_switch_fdb_get_flood_cfg(), which writes port indices
into the fixed-size cfg->if_id[DPSW_MAX_IF] array. When firmware reports
num_ifs >= 64, the loop can write past the array bounds.
Add a bound check for num_ifs in dpaa2_switch_init().
dpaa2_switch_fdb_get_flood_cfg() appends the control interface (port
num_ifs) after all matched ports. When num_ifs == DPSW_MAX_IF and all
ports match the flood filter, the loop fills all 64 slots and the control
interface write overflows by one entry.
The check uses >= because num_ifs == DPSW_MAX_IF is also functionally
broken.
build_if_id_bitmap() silently drops any ID >= 64:
if (id[i] < DPSW_MAX_IF)
bmap[id[i] / 64] |= ...
Fixes: 539dda3c5d ("staging: dpaa2-switch: properly setup switching domains")
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/SYBPR01MB78812B47B7F0470B617C408AAF74A@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
